scholarly journals Insecticide-Releasing LLDPE Films as Greenhouse Cover Materials

2018 ◽  
Author(s):  
Senem Avaz Seven ◽  
Ömer Faruk Tastan ◽  
Cüneyt Erdinç Taş ◽  
Hayriye Ünal ◽  
İkbal Agah Ince ◽  
...  
Keyword(s):  
Testing Machine ◽  
Active Agent ◽  
Halloysite Nanotubes ◽  
Polymeric Films ◽  
Nanocomposite Films ◽  
Biological Assessment ◽  
Linear Low Density Polyethylene ◽  
Scanning Calorimetry ◽  
Agricultural Industry ◽  
Chemical Pesticides

AbstractThe use of chemical pesticides is limited by several public health concerns regarding their toxicity levels and indiscriminate use. Nevertheless, they are still vital components of agricultural industry since no other competitive equivalents to chemical pesticides still exist in terms of efficiency. This study describes the preparation and biological assessment of an insecticide releasing plastic film for agricultural covering purposes. The formulation was prepared by incorporation of deltamethrin loaded, nano-sized halloysite nanotubes into polymeric films. Thermal, morphological, and mechanical properties of films were characterized by Differential Scanning Calorimetry (DSC), Scanning Electron Microscopy (SEM) and Universal Testing Machine UTM. Sustained release profiles of the films were evaluated by Thermogravimetric Analysis (TGA). Results reveal that deltamethrin was successfully loaded into halloysite nanotubes and nanotube incorporation enhances the elastic modulus of linear-low density polyethylene (LLDPE) films. In addition, films exhibit controlled release function of the active agent for 32 days. Bioassays of the nanocomposite films with varying deltamethrin doses tested on grasshoppers showed that the LD50 values of the films are 1.85x10−5 g/cm2. Insecticidal activities of films were tested in greenhouse on Medicago Sativa plants contaminated with thrips and aphid. Nanocomposites are observed to repel mature aphids and kill young aphids and thrips.

Evaluation of mechanical, morphological and thermal properties of waste rubber tire powder/LLDPE blends

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Zhen Xiu Zhang ◽  
Shu Ling Zhang ◽  
Jin Kuk Kim
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Testing Machine ◽  
Thermoplastic Elastomers ◽  
Linear Low Density Polyethylene ◽  
Scanning Calorimetry ◽  
Waste Rubber ◽  
Universal Testing ◽  
Rubber Tire ◽  
Thermal Stability Of

AbstractPolymer blends of WRT (waste rubber tire) powder/LLDPE (linear low density polyethylene) have been attempted to prepare thermoplastic elastomers (TPEs). The effects of maleic anhydride-grafted styrene-ethylene-butylene-styrene (SEBS-g-MA) and dicumyl peroxide (DCP) on mechanical, morphological and thermal properties of the blends were evaluated using universal testing machine (UTM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetric analyses (TGA). It was found that combination of SEBS-g-MA and DCP could better enhance the mechanical properties of WRT powder/LLDPE blends compared to SEBS-g-MA or DCP alone. Better compatibility between WRT powder and LLDPE was responsible for the enhancement of mechanical properties, as supported by SEM. The incorporation of SEBS-g-MA and DCP with WRT powder/LLDPE blends reduced the crystallizable perfectness of the blends, but slightly increased the thermal stability of the blends, as shown from DSC and TGA results

scholarly journals Effect of tungsten disulfide nanotubes on crystallization of polylactide under uniaxial deformation and annealing

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Fausta Loffredo ◽  
Loredana Tammaro ◽  
Tiziana Di Luccio ◽  
Carmela Borriello ◽  
Fulvia Villani ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Structural Evolution ◽  
Tungsten Disulfide ◽  
Fine Tuning ◽  
Nanocomposite Films ◽  
Uniaxial Deformation ◽  
Scanning Calorimetry ◽  
X Ray ◽  
X Ray Scattering

AbstractTungsten disulfide (WS2) nanotubes (NTs) are examined here as a filler for polylactide (PLA) for their ability to accelerate PLA crystallization and for their promising biocompatibility in relevant to biomedical applications of PLA-WS2 nanocomposites. In this work, we have studied the structural and thermal properties of PLA-WS2 nanocomposite films varying the concentration of WS2 NTs from 0 (neat PLA) to 0.6 wt%. The films were uniaxially drawn at 90 °C and annealed at the same temperature for 3 and 10 min. Using wide angle x-ray scattering, Raman spectroscopy and differential scanning calorimetry, we probed the effects of WS2 NT addition on the structure of the PLA films at various stages of processing (unstretched, stretching, annealing). We found that 0.6 wt% of WS2 induces the same level of crystallinity in as stretched PLA-WS2 as annealing in neat PLA for 10 min. These data provide useful insights into the role of WS2 NTs on the structural evolution of PLA-WS2 composites under uniaxial deformation, and extend their applicability to situations where fine tuning of PLA crystallinity is desirable.

scholarly journals Isothermal Vulcanization and Non-Isothermal Degradation Kinetics of XNBR/Epoxy/XNBR-g-Halloysite Nanotubes (HNT) Nanocomposites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2872
Author(s):  
Seyed Mohamad Reza Paran ◽  
Ghasem Naderi ◽  
Elnaz Movahedifar ◽  
Maryam Jouyandeh ◽  
Krzysztof Formela ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Degradation Kinetics ◽  
Halloysite Nanotubes ◽  
Butadiene Rubber ◽  
Order Model ◽  
Scanning Calorimetry ◽  
Theoretical Methods ◽  
Vulcanization Kinetics ◽  
Kinetics Of ◽  
Thermal Stability Of

The effect of several concentrations of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the vulcanization and degradation kinetics of XNBR/epoxy compounds were evaluated using experimental and theoretical methods. The isothermal vulcanization kinetics were studied at various temperatures by rheometry and differential scanning calorimetry (DSC). The results obtained indicated that the nth order model could not accurately predict the curing performance. However, the autocatalytic approach can be used to estimate the vulcanization reaction mechanism of XNBR/epoxy/XHNTs nanocomposites. The kinetic parameters related to the degradation of XNBR/epoxy/XHNTs nanocomposites were also assessed using thermogravimetric analysis (TGA). TGA measurements suggested that the grafted nanotubes strongly enhanced the thermal stability of the nanocomposite.

scholarly journals Halloysite Nanotubes and Silane-Treated Alumina Trihydrate Hybrid Flame Retardant System for High-Performance Cable Insulation

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2134
Author(s):  
Sandra Paszkiewicz ◽  
Izabela Irska ◽  
Iman Taraghi ◽  
Elżbieta Piesowicz ◽  
Jakub Sieminski ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polymer Blend ◽  
Hybrid System ◽  
Reference Sample ◽  
Melt Flow Index ◽  
Halloysite Nanotubes ◽  
Flow Index ◽  
Scanning Calorimetry ◽  
Limiting Oxygen Index ◽  
Alumina Trihydrate

The effect of the presence of halloysite nanotubes (HNTs) and silane-treated alumina trihydrate (ATH-sil) nanofillers on the mechanical, thermal, and flame retardancy properties of ethylene-vinyl acetate (EVA) copolymer/low-density polyethylene (LDPE) blends was investigated. Different weight percentages of HNT and ATH-sil nanoparticles, as well as the hybrid system of those nanofillers, were melt mixed with the polymer blend (reference sample) using a twin-screw extruder. The morphology of the nanoparticles and polymer compositions was studied using scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The mechanical properties, hardness, water absorption, and melt flow index (MFI) of the compositions were assessed. The tensile strength increases as a function of the amount of HNT nanofiller; however, the elongation at break decreases. In the case of the hybrid system of nanofillers, the compositions showed superior mechanical properties. The thermal properties of the reference sample and those of the corresponding sample with nanofiller blends were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Two peaks were observed in the melting and crystallization temperatures. This shows that the EVA/LDPE is an immiscible polymer blend. The thermal stability of the blends was improved by the presence of HNTs and ATH-sil nanoparticles. Thermal degradation temperatures were shifted to higher values by the presence of hybrid nanofillers. Finally, the flammability of the compositions was assessed. Flammability as reflected by the limiting oxygen index (OI) was increased by the presence of HNT and ATH-sil nanofiller and a hybrid system of the nanoparticles.

Laser Damage Threshold of Hydrophobic Up-Conversion Carboxylated Nanocellulose/SrF2:Hо Composite Films Functionalized With 3-Aminopropyltriethoxysilane

2021 ◽  
Author(s):  
Anna A. Luginina ◽  
Sergey V. Kuznetsov ◽  
Vladimir K. Ivanov ◽  
Valery V. Voronov ◽  
Alexey D. Yapryntsev ◽  
...  
Keyword(s):  
Cellulose Nanofibrils ◽  
Damage Threshold ◽  
Nanocomposite Films ◽  
Laser Damage Threshold ◽  
Laser Damage ◽  
Homogeneous Distribution ◽  
Scanning Calorimetry ◽  
Long Distance ◽  
Oh Groups ◽  
X Ray

Abstract Luminescent nanocomposite films, containing SrF 2 :Но up-conversion particles, were prepared by two different protocols from aqueous dispersions of TEMPO-oxidized cellulose nanofibrils (TOCNF) functionalized with 3-aminopropyltriethoxysilane (APS) without the use of organic solvents at pH = 4.0-4.5 and 9.0-9.5, respectively. Proposed synthetic protocols included formation of the films by drying the dispersions containing pre-hydrolyzed APS adsorbed onto TOCNF and SrF 2 :Но particles followed by heating at 105 °C. Hydrophobic (water contact angle 101 ± 2°), strong, and translucent TOCNF/SrF 2 :Но-APS films were prepared by casting from a solution at pH = 4.0-4.5. Scanning electron microscopy, energy-dispersive X-ray spectroscopy with element mapping, Fourier-transform infrared spectroscopy, X-ray diffraction methods confirmed homogeneous distribution of up-conversion particles in TOCNF matrices as well as the grafting of linear polysiloxanes via the condensation of silanol groups and OH-groups on the surface of TOCNF. Differential scanning calorimetry and thermogravimetry data confirmed an increase in thermal stability of the APS modified nanocomposite films obtained at pH = 4.0-4.5. Hydrophobic TOCNF/SrF 2 :Но-APS nanocomposite films exhibited an intense red luminescence in the visible spectrum range ( 5 I 7 level excitation of Ho 3+ ions with 1912 nm laser irradiation) as well as two-times higher laser damage threshold compared to unmodified TOCNF/SrF 2 :Но films. TOCNF/SrF 2 :Но films can be used for visualization 2 μm laser radiation in medicine and long-distance atmosphere monitoring.

scholarly journals Biocomposites from Rice Straw Nanofibers: Morphology, Thermal and Mechanical Properties

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2138 ◽  
Author(s):  
José Carlos Alcántara ◽  
Israel González ◽  
M. Mercè Pareta ◽  
Fabiola Vilaseca
Keyword(s):  
Rice Straw ◽  
Mechanical Performance ◽  
Cellulose Nanofibers ◽  
Nucleating Agent ◽  
Mechanical Analysis ◽  
Nanocomposite Films ◽  
Chemical Extraction ◽  
Poly Vinyl Alcohol ◽  
Scanning Calorimetry ◽  
The Matrix

Agricultural residues are major potential resources for biomass and for material production. In this work, rice straw residues were used to isolate cellulose nanofibers of different degree of oxidation. Firstly, bleached rice fibers were produced from the rice straw residues following chemical extraction and bleaching processes. Oxidation of rice fibers mediated by radical 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) at pH 10 was then applied to extract rice cellulose nanofibers, with diameters of 3–11 nm from morphological analysis. The strengthening capacity of rice nanofibers was tested by casting nanocomposite films with poly(vinyl alcohol) polymer. The same formulations with eucalyptus nanofibers were produced as comparison. Their thermal and mechanical performance was evaluated using thermogravimetry, differential scanning calorimetry, dynamic mechanical analysis and tensile testing. The glass transition of nanocomposites was shifted to higher temperatures with respect to the pure polymer by the addition of rice cellulose nanofibers. Rice nanofibers also acted as a nucleating agent for the polymer matrix. More flexible eucalyptus nanofibers did not show these two phenomena on the matrix. Instead, both types of nanofibers gave similar stiffening (as Young’s modulus) to the matrix reinforced up to 5 wt.%. The ultimate tensile strength of nanocomposite films revealed significant enhancing capacity for rice nanofibers, although this effect was somehow higher for eucalyptus nanofibers.

A study of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) biofilms’ thermal and biodegradable properties reinforced with halloysite nanotubes

2018 ◽  
Vol 52 (23) ◽  
pp. 3199-3207 ◽  
Author(s):  
SM Kamrul Hasan ◽  
S Zainuddin ◽  
J Tanthongsack ◽  
MV Hosur ◽  
L Allen
Keyword(s):  
Petroleum Products ◽  
Halloysite Nanotubes ◽  
Synthetic Polymers ◽  
Soil Conditions ◽  
Solvent Casting ◽  
Casting Method ◽  
Scanning Calorimetry ◽  
Structural Applications ◽  
Biodegradation Process ◽  
Biodegradable Properties

The aim of this study is to investigate and optimize the performance of a promising biopolymer, poly (3-hydroxybutyrate-co-3-hydroxyvalerate) which can potentially replace non-biodegradable synthetic polymers derived from toxic petroleum products. Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) biofilms were prepared using solvent casting method, and its thermal properties were determined using thermogravimetric and differential scanning calorimetry techniques. Also, the durability and biodegradability of these films were studied by keeping the samples in water and Alabama soil conditions for various lengths of time. Our results showed that the thermal and moisture resistance of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) biopolymer can be enhanced significantly with the addition of low halloysite nanotubes concentrations. Also, the biodegradation process of the poly (3-hydroxybutyrate-co-3-hydroxyvalerate) films was faster with the addition of halloysite nanotubes attributed to the accelerated microbial microorganism reaction in the soil. This study led to cognize that the PHBV biopolymers added with halloysite nanotubes can be successfully used for various biomedical, industrial and structural applications, and then decompose at a desired faster rate afterward.

Evaluation of intercalation and interaction in in-situ polymerized PLA-HNT bionanocomposites

2020 ◽  
pp. 096739112092779
Author(s):  
P Manju ◽  
P Santhana Gopala Krishnan ◽  
SK Nayak
Keyword(s):  
Electron Microscopy ◽  
Halloysite Nanotubes ◽  
Poly Lactic Acid ◽  
Resonance Spectroscopy ◽  
Hydroxyl Groups ◽  
Scanning Calorimetry ◽  
Transmission Electron Microscopy Analysis ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis

We report the in-situ synthesis of poly(lactic acid)–halloysite nanotubes (PLA-HNT) bionanocomposites, with a perspective to improve the interaction between PLA and HNT. Three PLA-HNT bionanocomposites with different HNT weight percentages were synthesized by polycondensation, followed by azeotropic distillation technique. Fourier transform infrared spectroscopy studies indicated the existence of hydrogen bonding between terminal hydroxyl groups of PLA and Si–O–Si groups present in the outer surface of HNT. Wide-angle X-ray diffraction, 29Si- and 27Al-nuclear magnetic resonance spectroscopy analysis confirmed the intercalation of PLA into HNT. Scanning electron microscopy analysis confirmed that there was no significant agglomeration and PLA matrix was found to be embedded with HNT. Transmission electron microscopy analysis also gave ample proof to substantiate the intercalation of PLA chains into HNT. Studies on zeta potential of PLA-HNT bionanocomposites, as compared with PLA, also confirmed the interactions between PLA and HNT. Single melting peak in differential scanning calorimetry analysis indicated the existence of one form of crystalline structure.

Sign in / Sign up

Export Citation Format

Share Document