In depth study of lead frame tape residuein quad flat non-leaded package

2019 ◽  
Vol 36 (4) ◽  
pp. 129-136
Author(s):  
Shri Kumaran Nadaraja ◽  
Boon Kar Yap
Keyword(s):  
Lead Frame ◽  
Correct Process ◽  
Adhesive Properties ◽  
Content Type ◽  
Die Attach ◽  
Viable Solution ◽  
Low Pass ◽  
Depth Study ◽  
Overall Performance ◽  
Die Bonding

Purpose Lead frame tape is a crucial support for lead frames in the IC assembly process. The tape residue on the quad flat non-leaded (QFN) could result in low reliability and failure in electrical conductivity tests. The tape residue would affect overall performance of the chips and contribute to low pass yield. The purpose of this paper is to present an in-depth study of tape residue and factors that may affect it. Design/methodology/approach An experiment using lead frame and tapes from three manufacturers with two types of die bond adhesives, namely, die attach film (DAF) and wafer back coating (WBC), was conducted. Copper (Cu) wire bonding and die bonding performances were measured in terms of process capability, stitch bond strength and die attach strength. Findings Results showed that no tape residue was observed on the thermoplastic adhesive-based lead frames manufactured by Hitachi after the de-taping process because of the tape’s thermoplastic adhesive properties. Originality/value This paper studies the occurrence of tape residue and a viable solution for it through the correct process optimization and combination of semiconductor manufacturing materials. Factors that may affect tape residue have also been studied and further research can be done to explore other options in the future as an alternate solution.

scholarly journals Adding value and meaning to coheating tests

2014 ◽  
Vol 32 (4) ◽  
pp. 331-342 ◽  
Author(s):  
Anne Stafford ◽  
David Johnston ◽  
Dominic Miles-Shenton ◽  
David Farmer ◽  
Matthew Brooke-Peat ◽  
...  
Keyword(s):  
Large Scale ◽  
Performance Testing ◽  
Building Performance ◽  
Content Type ◽  
Testing Procedures ◽  
Depth Study ◽  
Quantitative Understanding ◽  
Overall Performance ◽  
Practical Factors ◽  
Practical Implications

Purpose – The coheating test is the standard method of measuring the heat loss coefficient of a building, but to be useful the test requires careful and thoughtful execution. Testing should take place in the context of additional investigations in order to achieve a good understanding of the building and a qualitative and (if possible) quantitative understanding of the reasons for any performance shortfall. The paper aims to discuss these issues. Design/methodology/approach – Leeds Metropolitan University has more than 20 years of experience in coheating testing. This experience is drawn upon to discuss practical factors which can affect the outcome, together with supporting tests and investigations which are often necessary in order to fully understand the results. Findings – If testing is approached using coheating as part of a suite of investigations, a much deeper understanding of the test building results. In some cases it is possible to identify and quantify the contributions of different factors which result in an overall performance shortfall. Practical implications – Although it is not practicable to use a fully investigative approach for large scale routine quality assurance, it is extremely useful for purposes such as validating other testing procedures, in-depth study of prototypes or detailed investigations where problems are known to exist. Social implications – Successful building performance testing is a vital tool to achieve energy saving targets. Originality/value – The approach discussed clarifies some of the technical pitfalls which may be encountered in the execution of coheating tests and points to ways in which the maximum value can be extracted from the test period, leading to a meaningful analysis of the building's overall thermal performance.

Analysis of Two Electrical Failures Caused by Die Attach of Exposed Pad Package

2014 ◽  
Author(s):  
Jinglong Li ◽  
Motohiko Masuda ◽  
Yi Che ◽  
Miao Wu
Keyword(s):  
Bonding Process ◽  
Die Attach ◽  
Die Bonding ◽  
Generic Analysis

Abstract Die attach is well known in die bonding process. Its electrical character is simple. But some failures caused by die attach are not so simple. And it is not proper to analyze by a generic analysis flow. The analysis of two failures caused by die attach are presented in this paper.

Performance measurement for supply chain management and quality management integration

2019 ◽  
Vol 27 (7) ◽  
pp. 2130-2147 ◽  
Author(s):  
Marcio C. Machado ◽  
Renato Telles ◽  
Paulo Sampaio ◽  
Maciel M. Queiroz ◽  
Ana Cristina Fernandes
Keyword(s):  
Supply Chain ◽  
Supply Chain Management ◽  
Quality Management ◽  
Performance Measurement ◽  
Performance Measures ◽  
Chain Management ◽  
Content Type ◽  
Theoretical Perspectives ◽  
Overall Performance ◽  
Key Aspects

Purpose The purpose of this paper is to present a conceptual framework for performance measurement (PM) for the integration of supply chain management (SCM) and quality management (QM). Design/methodology/approach A systematic literature review on SCM and QM was conducted to develop key performance measures related to six areas of integration between QM and SCM: leadership; continuous improvement and innovation; sustainability performance; stakeholders; information system; and management and strategic planning. Findings Supported by the literature concerning to supply chain quality management (SCQM) integration, a set of nine propositions about performance measures, that contribute to the integration of SCQM, were developed. Originality/value This study contributes to QM practices within a supply chain environment from an integrated perspective. Additionally, the propositions have significant implications from both managerial and theoretical perspectives. This study also extends the concept of supply chain quality integration by focusing on key aspects of PM that may help to improve the overall performance of the supply chain.

The creation and development of learning organizations: a review

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohit Kumar ◽  
Justin Paul ◽  
Madhvendra Misra ◽  
Rubina Romanello
Keyword(s):  
Knowledge Management ◽  
Future Research ◽  
Business Organization ◽  
It Infrastructure ◽  
Content Type ◽  
Modern Business ◽  
Managerial Implications ◽  
Overall Performance ◽  
Stored Information ◽  
And Storage

Purpose In this paper, using the antecedents, decisions and outcomes (ADO) framework, the factors/key performance indicators (KPIs) most relevant for creating or building a learning organization (LO) are identified. This study aims to contribute to the field of knowledge management (KM) in terms of introducing KPIs to foster a business organization with a continuous learning process, mechanisms of knowledge creation and memorization. Design/methodology/approach In total, 57 papers were selected for this systematic literature review (SLR) from Web of Science and Scopus covering the period 1985–2019. Findings The 12 most relevant KPIs are identified based on the literature survey conducted in the field of LO. Research limitations/implications The managerial implications of this review paper will be an added advantage to the modern business organization worldwide that have adopted KM practices to foster knowledge management with information technology (IT) infrastructure. As IT infrastructure focuses on knowledge acquisition, dissemination and storage but the KPIs revealed through this review will help in transforming stored information as learning for the organization to improve its overall performance. Originality/value This review synthesizes prior studies and provides directions for future research.

The impact of counterfeit risk management on healthcare supply chain performance: an empirical analysis

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mauro Falasca ◽  
Scott Dellana ◽  
William J. Rowe ◽  
John F. Kros
Keyword(s):  
Risk Management ◽  
Supply Chain ◽  
The United States ◽  
Equation Modeling ◽  
Significant Positive Effect ◽  
Healthcare Organizations ◽  
Content Type ◽  
Overall Performance ◽  
The Impact ◽  
Positive Effect

PurposeThis study develops and tests a model exploring the relationship between supply chain (SC) counterfeit risk management and performance in the healthcare supply chain (HCSC).Design/methodology/approachIn the proposed theoretical model, HCSC counterfeit risk management is characterized by HCSC counterfeit risk orientation (HCRO), HCSC counterfeit risk mitigation (HCRM) and HCSC risk management integration (HRMI), while performance is represented by healthcare logistics performance (HLP) and healthcare organization overall performance (HOP). Partial least squares structural equation modeling (PLS-SEM) and survey data from 55 HCSC managers are used to test the research hypotheses.FindingsHCRO has a significant positive effect on HCRM, while HCRM has a positive impact on HRMI. With respect to HLP, HCRM has a nonsignificant effect, while HRMI has a significant impact, thus confirming the important mediating role of HRMI. Finally, HLP has a significant positive effect on the overall performance of healthcare organizations.Research limitations/implicationsAll study participants were from the United States, limiting the generalizability of the study findings to different countries or regions. The sample size employed in the study did not allow the authors to distinguish among the different types of healthcare organizations.Originality/valueThis study delineates between a healthcare organization's philosophy toward counterfeiting risks vs actions taken to eliminate or reduce the impact of counterfeiting on the HCSC. By offering firm-level guidance for managers, this study informs healthcare organizations about addressing the challenge of counterfeiting in the HCSC.

Sales and operations planning for new products: a parallel process?

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Gustavo Bagni ◽  
Juliana Keiko Sagawa ◽  
Moacir Godinho Filho
Keyword(s):  
Design Science ◽  
Contextual Factors ◽  
New Products ◽  
Science Research ◽  
Operations Planning ◽  
Content Type ◽  
Demand Fulfillment ◽  
Viable Solution ◽  
Additional Costs ◽  
Update Frequency

PurposeThis paper aims to detail how a Sales and Operations Planning (S&OP) process can be designed to support the planning requirements of recently introduced products.Design/methodology/approachDesign science research was conducted to propose and implement an S&OP model for demand fulfillment after the introduction of new products. The results were analyzed using the CIMO (Context, Intervention, Mechanisms and Outcomes) logic, and two sets of design propositions were formulated.FindingsAn S&OP process for new products can reduce additional costs for market fulfillment by concentrating the planning efforts on new products, aligning organizational efforts, and increasing the sales and supply chain information’s update frequency.Research limitations/implicationsThe outcomes of S&OP new products were analyzed in a single organization and are limited to the contextual factors presented.Practical implicationsThis paper describes in detail how to organize an S&OP focused on new products. By considering the contextual factors and design propositions, managers can potentially increase the success of new products introduction (NPI) in their context.Originality/valueA specific S&OP process focused on new products is a viable solution and could co-exist with a traditional S&OP process. Moreover, we identified six contextual factors that influence the outcomes of the S&OP new products.

Micro-loans and financial performance: a case of a Chinese commercial bank

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Jasmine Alam ◽  
Mustapha Ibn Boamah ◽  
Yuheng Liu
Keyword(s):  
Corporate Social Responsibility ◽  
Social Responsibility ◽  
Financial Performance ◽  
Design Methodology ◽  
Annual Reports ◽  
Content Type ◽  
Overall Performance ◽  
Corporate Social ◽  
Corporate Social Responsibility Reports ◽  
The Relationship

Purpose This study aims to investigate the relationship between a commercial bank’s micro-loaning activity and overall performance over a 10-year period. Design/methodology/approach Quarterly data was obtained from the Wind Database, China Minsheng Banks’s official annual reports and annual corporate social responsibility reports from 2009 to 2019, to test the linear relationship between micro-loan activities and the overall financial performance of the bank. Findings The results of this study empirically demonstrate that there is a positive relationship between increases in micro-loaning activity and the overall performance of the bank. Some key recommendations for the sector are shared in the conclusion of this paper. Originality/value In the financial sector, some corporate social responsibility activities focus on the issuance of micro-loans. It is unclear, however, if this has also served as a means to increase profitability and overall performance for such institutions.

Cooperatives: an alternative to water privatization in Greece

2014 ◽  
Vol 10 (2) ◽  
pp. 135-154 ◽  
Author(s):  
Ifigeneia Douvitsa ◽  
Demosthenis Kassavetis
Keyword(s):  
Design Methodology ◽  
Water Distribution ◽  
Water Privatization ◽  
Negative Effects ◽  
Content Type ◽  
Negative Results ◽  
Viable Solution ◽  
Water Provision ◽  
First Time ◽  
Practical Implications

Purpose – The aim of this article is to investigate the organization of water cooperatives in Greece for the first time, as promoted by a spontaneous social mobilization called Initiative 136. The above attempt appears as an alternative proposition as opposed to the state-driven full privatization of EYATH S.A. Design/methodology/approach – This article presents previous work on water cooperatives and the negative effects of water privatization worldwide, relating it to water privatization in Greek reality through the prism of the current recession. Findings – While full privatization under the pressure of the economic crisis is very likely to yield significantly negative results, a transformation into a water cooperative might provide a viable solution. Research limitations/implications – Water cooperatives provide a solution for water distribution that is friendly for the consumer, the society and the environment. Practical implications – Application of a cooperative method of water provision in Greece could be a springboard for the use of the model in other areas. Originality/value – The article evaluates the privatization and cooperativization attempt of EYATH S.A. based on previous related research and considering Greece ' s current conditions.

Performance measurement and management for manufacturing SMEs: a financial statement-based system

2017 ◽  
Vol 21 (1) ◽  
pp. 17-36 ◽  
Author(s):  
Moujib Bahri ◽  
Josée St-Pierre ◽  
Ouafa Sakka
Keyword(s):  
Performance Measurement ◽  
Low Cost ◽  
Secondary Data ◽  
Specific Area ◽  
Financial Statements ◽  
Financial Statement ◽  
Business Practices ◽  
Content Type ◽  
Overall Performance ◽  
Probabilistic Sample

Purpose The purpose of this paper is to propose a performance measurement and management system (PMMS) for small- and medium-sized enterprises (SMEs) based on an analysis of the connections between the firm’s business practices and financial results as reported in the financial statements. Design/methodology/approach Secondary data on the business practices and financial statements of 108 Canadian manufacturing SMEs were taken from a private database. Items from financial statements were used to measure the firm’s performance in specific areas such as sales and current assets management, while net profit was used to measure the overall performance. Information about the level of adoption of more than 120 business practices by the sampled firms was also used. Step-wise regression was then performed for two consecutive years to identify the business practices that had significantly influenced the items in the financial statements. Findings The findings show that an understanding of the business practice/financial statement connection can be useful in managing SME performance. The regression analyses provide rich and interesting results. They indicate that some practices influence performance quickly, while others have a deferred effect. In addition, some practices have impacts that are significant in specific areas of the organization but insignificant in terms of overall performance, while others affect the firm’s overall performance but not the specific area they are intended to improve. Research limitations/implications The main limitation of the study is the non-probabilistic sample. However, the sampled SMEs vary widely in their characteristics, which should partially mitigate the negative impacts of a non-probabilistic sample. Practical implications The paper offers a useful and low-cost PMMS for SMEs, using information that is easily available to owner-managers. It shows that SME performance can be managed using a simple system built around the firm’s financial statements. Originality/value The study is one of the first to empirically test the connection between an extensive list of SME business practices and the financial results presented in the firms’ financial statements.

Parameters of automated fraud detection techniques during online transactions

2018 ◽  
Vol 25 (3) ◽  
pp. 702-720 ◽  
Author(s):  
Vipin Khattri ◽  
Deepak Kumar Singh
Keyword(s):  
Detection System ◽  
Fraud Detection ◽  
Security System ◽  
Research Papers ◽  
Content Type ◽  
Detection Techniques ◽  
Online Transactions ◽  
Detection Systems ◽  
Different Types ◽  
Depth Study

Purpose This paper aims to provide information of parameters and techniques used in the automated fraud detection system during online transaction. With the increase in the use of online transactions, the concerns regarding data security have also increased. To tackle the frauds, lot of research has been done and plethora of papers are available on the related topics. The purpose of this paper is to provide the clear pathway for researchers to move in the direction of development of automated fraud detection system to prevent the fraud during online transaction. Design/methodology/approach This literature review analyses and compares the different types of techniques for detecting fraud during online transaction. An in-depth study of the most prominent journals has been done and the core methodology of the papers has been presented. This article also shed some light on different types of parameters used in fraud detection techniques during online transaction. Findings There are vast varieties of various fraud detection techniques, and every technique has completed task in its own way. After studying approximately 41 research papers, 14 books and four reports, in total 30 parameters have been identified and a detailed study of the parameters has been presented. The parameters are also listed with their details that how these parameters are used in the security system for detecting online transaction fraud. Research limitations/implications This paper provides empirical insight about the parameters and their prominence in the development of automated fraud detection security system of online transaction. This paper encourages the researchers to development of improved fraud detection system. Practical implications This paper will pave the way for researchers to do a focused research on the fraud detection methodologies. The analysis will help in zeroing down the most prevalent topic of research in this field. The researchers will be able to understand the internal details of parameters and techniques used in the fraud detection systems. This literature also helps the research to think in a variety of ways that how these parameters will be used in the development of fraud detection system. Originality/value This paper is one of the most comprehensive reviews in its field. It tries and attempts to fill a void created because of lack of compilation of the laid fraud detection parameters.

Sign in / Sign up

Export Citation Format

Share Document