EFFECT OF DIFFERENT TREATMENT PROCESSES AND PRESERVATION METHODS ON THE QUALITY OF TRUFFLES: I. CONVENTIONAL METHODS (DRYING/FREEZING)

2006 ◽  
Vol 30 (3) ◽  
pp. 335-351 ◽  
Author(s):  
IBRAHIM M. AL-RUQAIE
2010 ◽  
Vol 13 (3) ◽  
pp. 92-102
Author(s):  
Trung Duc Le

The industrial production of ethanol by fermentation using molasses as main material that generates large quantity of wastewater. This wastewater contains high levels of colour and chemical oxygen demand (COD), that may causes serious environmental pollution. Most available treatment processes in Vietnam rely on biological methods, which often fail to treat waste water up to discharge standard. As always, it was reported that quality of treated wastewater could not meet Vietnameses discharge standard. So, it is necessary to improve the treatment efficiency of whole technological process and therefore, supplemental physico-chemical treatment step before biodegradation stage should be the appropriate choice. This study was carried out to assess the effect of coagulation process on decolourization and COD removal in molasses-based ethanol production wastewater using inorganic coaglutant under laboratory conditions. The experimental results showed that the reductions of COD and colour with the utilization of Al2(SO4)3 at pH 9.5 were 83% and 70%, respectively. Mixture FeSO4 – Al2(SO4)3 at pH 8.5 reduced 82% of colour and 70% of COD. With the addition of Polyacrylamide (PAM), the reduction efficiencies of colour, COD and turbidity by FeSO4 – Al2(SO4)3 were 87%, 73.1% and 94.1% correspondingly. It was indicated that PAM significantly reduced the turbidity of wastewater, however it virtually did not increase the efficiencies of colour and COD reduction. Furthermore, the coagulation processes using PAM usually produces a mount of sludge which is hard to be deposited.


2015 ◽  
Vol 20 (4) ◽  
pp. 438-443 ◽  
Author(s):  
Aukje Brat ◽  
Robert A. Pol ◽  
Henri G.D. Leuvenink
Keyword(s):  

2018 ◽  
Vol 7 (2.29) ◽  
pp. 840
Author(s):  
Devi Pratami ◽  
Asti Amalia Nur Fajrillah ◽  
Tien Fabrianti Kusumasari

PowerPoint is a slide show presentation program from Microsoft, which also one of the most widely used programs to develop visual presentation all over the world. PowerPoint has become enormously popular because of the functionalities offered and since it is designed to be easy to use. Previous researchers stated PowerPoint as one of the best tool to facilitate users to deliver idea/objective/goal, especially in education field. But some of the researchers argue that in today’s environment, PowerPoint no longer be the best tool to deliver information. This research aims to evaluate and design the content of the slide which influences the level of students understanding on information being presented. This research will be comparing three methods at once, which are a conventional method where the material course will be presented without any PowerPoint and are limited to boards and books. The second method will be a material-course presentation using a PowerPoint where it was using an aesthetically pleasing and methodically correct PowerPoint. And the last method would be the combination between the two. By using a statistical test ANOVA that among three methods there is no significance impact to the students understanding. Nevertheless, based on the test score that are done after treatment the results show that the quality of PowerPoint slide has an influence to the level of students understanding compared to conventional methods (blackboard and textbook). But only attractive slide itself is insufficient to improve students understanding, this study will incorporate conventional method and attractive slide through content visualization in order to gives a better impact on students understanding.  


2013 ◽  
Vol 726-731 ◽  
pp. 2510-2514 ◽  
Author(s):  
Hong Ping He ◽  
De Li Wu

The quality of water from traditional two-stage biochemical treatment process of papermaking wastewater cannot meet the pollutants discharge standard of paper industry,therefore it is necessary to develop new advanced treatment processes to further treat the effluent. This paper adopts the homogeneous Fenton oxidation technology to treat the effluent from a secondary sedimentation tank of a papermaking factory by batch experiments. The optimum reaction conditions are H2O2dosage 6.54mmol/L, FeSO4.7H2O dosage 200mg/L, pH=3, t=1.5h and of all the experiments the dosage of polyacrylamide is 3ppm. The COD of the treated water is under 50mg/L and its removal rate can reach as high as 75.4%, the chroma almost falls to zero, the effluent meets the first grade of the national wastewater discharge standard. Therefore, the homogeneous Fenton is an effective alternative for papermaking wastewater advanced treatment, due to its high effect.


Author(s):  
Ednei Bruce Da Silva ◽  
Antônio Estanislau Sanches ◽  
David Barbosa de Alencar ◽  
Mike Jordan Braz Izel ◽  
Camily Murrieta Vasconcelos Oliveira Bezerra ◽  
...  

The water treatment processes in which microorganisms act are margin filtration, slow filtration and biological activated carbon (CAB) [2]. For this research, a study of permeable concrete with the addition of 2% activated carbon for light traffic paving was performed. The objective of this research is to identify the feasibility of using this concrete so that filtered water can reach at least the basic sanitation networks, with a better quality to be treated. For this, characterizations of the quality of the concrete component materials were made with a novelty, using the fine aggregate (sand). After the characterizations, the permeable concrete traces with mechanical strength of 30MPa were made. Dosing analyzes followed with molding, curing and rupture of concrete specimens. The results of the arithmetic mean of the axial compression of conventional concrete at 28 days were 34.2 MPa and the concrete with the addition of activated carbon was 32.2 MPa, reaching the expectations of strength. Complementary experiments were performed for the quality of the water filtered by the CP's, the pH, the alkalinity and the chlorine content were analyzed. The pH of the conventional concrete found was 7.6 and the concrete with the addition of activated carbon was between 7.2 and 6.8, which may be the best result found


2021 ◽  
Vol 30 (6) ◽  
pp. 50-55
Author(s):  
S.V. Borisova ◽  
◽  
N.U. Mukhametchina ◽  
G.S. Sagdeeva ◽  
◽  
...  

The results of the study of the influence of various concentrations of the complex bakery improver «Unipan Total» on the properties of semi-finished products and quality indicators of bakery products are presented. Bakery products were produced using the unpaired method according to a unified recipe for Dniprovskaya buns. To obtain a high-quality product, prototypes were prepared from wheat bakery flour of the highest grade with the addition of the «Unipan Total» improver at a concentration of 0,5 to 8% to the flour weight, control ones without the improver. Organoleptic and physicochemical indicators of the quality of wheat bread samples were determined by conventional methods.


2019 ◽  
Vol 125 ◽  
pp. 07008 ◽  
Author(s):  
Fadel Iqbal Muhammad ◽  
Mochamad Arief Budihardjo

Currently, Diponegoro University has been composting dry leaves with conventional methods through a facility called TPST. Even so, the processing which have been carried out has not been able to process all the organic waste in the location. Seeing these conditions, it is necessary to look for alternatives that are better and more economical to apply. Bioactivators are used from the leaves of Pterocarpus indicus which serve to accelerate the composting process. The bioactivators was made by making a solution of the leaves of Pterocarpus indicus which has been mashed, then mixed with molasses and rice flour and then left for 15 days. By using experimental method, the composting process is observed. This study aims to analyze the quality of compost with applicable standards. The quality of compost is assessed by looking at the pH, temperature, and macro nutrient percentage such as C-organic, N-total, and C / N ratio. During the composting process, variations in the stirring frequency are carried out, which is once every 2 days, 4 days and 7 days. After doing laboratory test, not all reactors meet the standards for pH, temperature, C-organic, N-total, and C / N ratio according to SNI 19-7030-2004.


2020 ◽  
Vol 26 (5) ◽  
pp. 453-461
Author(s):  
Shahnaz Fattahi ◽  
Nafiseh Zamindar

In the present study, the application of immersion ohmic heating was examined to improve thawing of frozen tuna fish cubes. The experimental tuna cubes (3 × 3 × 3 cm3) were thawed under ohmic heating subjected to three different voltages (40, 50, and 60 V) with three different concentrations (0.3, 0.4, and 0.5% w/v) of brine solution. The parameters associated with the quality of tuna, such as thawing time, thawing rate, thawing loss, cooking and total losses, centrifugal loss, lipid oxidation, texture, and color, were investigated during ohmic heating thawing, and compared with the conventional still air thawing, water thawing at 27 and 40 ℃. The results showed that immersion ohmic thawing significantly decreased the thawing time of frozen tuna fish cubes. Thawing time in ohmic treatment (50 V- 0.3% brine) was 5.95 times shorter than conventional conditions. The lowest thawing and cooking losses were observed at ohmic treatments. In addition, the ohmic treatments (group 1) were evaluated versus conventional methods (group 2) and the results showed that thawing and total losses in group 1 were significantly lower than group 2.


2019 ◽  
Vol 31 (5) ◽  
pp. 1013-1016
Author(s):  
J.B. Veeramalini ◽  
B. Bharathiraja ◽  
S. Raghu Vinayak ◽  
R. Vignesh ◽  
S.K. Raghul

In present work, water treatment processes is carried out by an affordable, readily usable and non-chemical method. This study involved the process of water may reduce the concentration of particulate matter that includes suspended particles, micro organisms, a range of dissolved and particulate material derived from the surfaces. The substances used in this work were coarsely blended with each other and a special composite fibre filter was made. Several processes variables of quality of waste are also measured before and after the treatment. Results show that the water quality has been enriched in several ways such as reduction in the dissolved solids, pH has been controlled, deodorization and prevention of microbial growth. Hence use of this work has been utilized as a “Homemaker Model” and act as an alternative method for wastewater treatment in a cost effective way.


Sign in / Sign up

Export Citation Format

Share Document