Vibration of Plate Structures Solved by DQEM Using EDQ

Author(s):  
Chang-New Chen

The vibration of plate structures is solved by DQEM using EDQ. In the DQEM discretization, EDQ is used to define the discrete element model. Discrete eigenvalue equations defined at interior discrete points in all elements, transition conditions defined on the inter-element boundary of two adjacent elements and boundary conditions at the structural boundary form the overall discrete eigenvalue equation system. Numerical results obtained by the developed numerical algorithms are presented. They demonstrate the developed numerical solution procedure. This vibration analysis model can be used to solve wide range of offshore engineering structures.

2001 ◽  
Vol 124 (1) ◽  
pp. 203-211 ◽  
Author(s):  
J. K. Martin ◽  
D. W. Parkins

Principles of a continuously adjustable hydrodynamic bearing are described together with an analysis model for studying its theoretical performance. The model included an expanded form of the governing Reynolds equation which took account of non-uniform variations in the fluid film thickness. A solution procedure was devised whereby for a given set of adjustment conditions, simultaneously converged fields of fluid film thickness, temperature, viscosity and pressure would result, together with oil film forces. A wide range of operating characteristics were studied with results predicting advantages and benefits over conventional hydrodynamic bearings.


Author(s):  
Chang-New Chen

The transient heat conduction in orthotropic medium is solved by using the DQEM to the spacial discretization and EDQ to the temporal discretization. In the DQEM discretization, DQ is used to define the discrete element model. Discrete transient equations defined at interior nodes in all elements, transition conditions defined on the inter-element boundary of two adjacent elements and boundary conditions at the structural boundary form a transient equation system at a specified time stage. The transient equation system is solved by the direct time integration schemes of time-element by time-element method and stages by stages method which are developed by using EDQ and DQ. Numerical results obtained by the developed numerical algorithms are presented. They demonstrate the developed numerical solution procedure.


Author(s):  
X. Lachenal ◽  
P. M. Weaver ◽  
S. Daynes

Conventional shape-changing engineering structures use discrete parts articulated around a number of linkages. Each part carries the loads, and the articulations provide the degrees of freedom of the system, leading to heavy and complex mechanisms. Consequently, there has been increased interest in morphing structures over the past decade owing to their potential to combine the conflicting requirements of strength, flexibility and low mass. This article presents a novel type of morphing structure capable of large deformations, simply consisting of two pre-stressed flanges joined to introduce two stable configurations. The bistability is analysed through a simple analytical model, predicting the positions of the stable and unstable states for different design parameters and material properties. Good correlation is found between experimental results, finite-element modelling and predictions from the analytical model for one particular example. A wide range of design parameters and material properties is also analytically investigated, yielding a remarkable structure with zero stiffness along the twisting axis.


2021 ◽  
Vol 10 (1) ◽  
pp. 9
Author(s):  
Prasad Lakshmi ◽  
Neethu Elsa Anil

Silos are used by a wide range of industries to store bulk solids in quantities ranging from a few tones to hundreds or thousands of tones. They can be constructed of steel or reinforced concrete. Steel bins range from heavily stiffened flat plate structures to efficient unstiffened shell structures. They can be closed or open. They are subjected to many different static and dynamic loading conditions, mainly due to the unique characteristics of stored materials. Wind and earthquake load often undermine the stability of the silos. A steel silo with and without stiffeners is adopted and static structural analysis and dynamic analysis is done. The analysis is done by idealizing geometry, material and boundary conditions. Keywords: steel, reinforced concrete, silos.


2007 ◽  
Vol 14 (4) ◽  
pp. 513-523 ◽  
Author(s):  
H. Erdoğan ◽  
B. Akpınar ◽  
E. Gülal ◽  
E. Ata

Abstract. Engineering structures, like bridges, dams and towers are designed by considering temperature changes, earthquakes, wind, traffic and pedestrian loads. However, generally, it can not be estimated that these structures may be affected by special, complex and different loads. So it could not be known whether these loads are dangerous for the structure and what the response of the structures would be to these loads. Such a situation occurred on the Bosporus Bridge, which is one of the suspension bridges connecting the Asia and Europe continents, during the Eurasia Marathon on 2 October 2005, in which 75 000 pedestrians participated. Responses of the bridge to loads such as rhythmic running, pedestrian walking, vehicle passing during the marathon were observed by a real-time kinematic (RTK) Global Positioning System (GPS), with a 2.2-centimeter vertical accuracy. Observed responses were discussed in both time domain and frequency domain by using a time series analysis. High (0.1–1 Hz) and low frequencies (0.00036–0.01172 Hz) of observed bridge responses under 12 different loads which occur in different quantities, different types and different time intervals were calculated in the frequency domain. It was seen that the calculated high frequencies are similar, except for the frequencies of rhythmic running, which causes a continuously increasing vibration. Any negative response was not determined, because this rhythmic effect continued only for a short time. Also when the traffic load was effective, explicit changes in the bridge movements were determined. Finally, it was seen that bridge frequencies which were calculated from the observations and the finite element model were harmonious. But the 9th natural frequency value of the bridge under all loads, except rhythmic running could not be determined with observations.


2006 ◽  
Vol 129 (1) ◽  
pp. 58-65 ◽  
Author(s):  
B. Scott Kessler ◽  
A. Sherif El-Gizawy ◽  
Douglas E. Smith

The accuracy of a finite element model for design and analysis of a metal forging operation is limited by the incorporated material model’s ability to predict deformation behavior over a wide range of operating conditions. Current rheological models prove deficient in several respects due to the difficulty in establishing complicated relations between many parameters. More recently, artificial neural networks (ANN) have been suggested as an effective means to overcome these difficulties. To this end, a robust ANN with the ability to determine flow stresses based on strain, strain rate, and temperature is developed and linked with finite element code. Comparisons of this novel method with conventional means are carried out to demonstrate the advantages of this approach.


Cancers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 925 ◽  
Author(s):  
Dinesh K.R. Medipally ◽  
Thi Nguyet Que Nguyen ◽  
Jane Bryant ◽  
Valérie Untereiner ◽  
Ganesh D. Sockalingum ◽  
...  

Radiation therapy (RT) is used to treat approximately 50% of all cancer patients. However, RT causes a wide range of adverse late effects that can affect a patient’s quality of life. There are currently no predictive assays in clinical use to identify patients at risk of normal tissue radiation toxicity. This study aimed to investigate the potential of Fourier transform infrared (FTIR) spectroscopy for monitoring radiotherapeutic response. Blood plasma was acquired from 53 prostate cancer patients at five different time points: prior to treatment, after hormone treatment, at the end of radiotherapy, two months post radiotherapy and eight months post radiotherapy. FTIR spectra were recorded from plasma samples at all time points and the data was analysed using MATLAB software. Discrimination was observed between spectra recorded at baseline versus follow up time points, as well as between spectra from patients showing minimal and severe acute and late toxicity using principal component analysis. A partial least squares discriminant analysis model achieved sensitivity and specificity rates ranging from 80% to 99%. This technology may have potential to monitor radiotherapeutic response in prostate cancer patients using non-invasive blood plasma samples and could lead to individualised patient radiotherapy.


2020 ◽  
Author(s):  
Weiguang Mao ◽  
Maziyar Baran Pouyan ◽  
Dennis Kostka ◽  
Maria Chikina

AbstractMotivationSingle cell RNA sequencing (scRNA-seq) enables transcriptional profiling at the level of individual cells. With the emergence of high-throughput platforms datasets comprising tens of thousands or more cells have become routine, and the technology is having an impact across a wide range of biomedical subject areas. However, scRNA-seq data are high-dimensional and affected by noise, so that scalable and robust computational techniques are needed for meaningful analysis, visualization and interpretation. Specifically, a range of matrix factorization techniques have been employed to aid scRNA-seq data analysis. In this context we note that sources contributing to biological variability between cells can be discrete (or multi-modal, for instance cell-types), or continuous (e.g. pathway activity). However, no current matrix factorization approach is set up to jointly infer such mixed sources of variability.ResultsTo address this shortcoming, we present a new probabilistic single-cell factor analysis model, Non-negative Independent Factor Analysis (NIFA), that combines features of complementary approaches like Independent Component Analysis (ICA), Principal Component Analysis (PCA), and Non-negative Matrix Factorization (NMF). NIFA simultaneously models uni- and multi-modal latent factors and can so isolate discrete cell-type identity and continuous pathway-level variations into separate components. Similar to NMF, NIFA constrains factor loadings to be non-negative in order to increase biological interpretability. We apply our approach to a range of data sets where cell-type identity is known, and we show that NIFA-derived factors outperform results from ICA, PCA and NMF in terms of cell-type identification and biological interpretability. Studying an immunotherapy dataset in detail, we show that NIFA identifies biomedically meaningful sources of variation, derive an improved expression signature for regulatory T-cells, and identify a novel myeloid cell subtype associated with treatment response. Overall, NIFA is a general approach advancing scRNA-seq analysis capabilities and it allows researchers to better take advantage of their data. NIFA is available at https://github.com/wgmao/[email protected]


Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Liuqun Zhao ◽  
Li Zheng ◽  
Hui Qin ◽  
Tiesuo Geng ◽  
Yonggang Tan ◽  
...  

Concrete three-point bending beams with preexisting cracks are widely used to study the growth process of I-II mixed mode cracks. Studying the failure characteristics of preexisting cracks at different locations on concrete three-point bending beams not only has important scientific significance but also has a wide range of engineering application backgrounds in the safety assessment of engineering structures. In this paper, through several numerical experiments, the influence of preexisting cracks at different positions on the failure characteristics of concrete three-point bending beams is studied, and three typical failure modes are obtained. The failure process of the specimens with three typical failure modes is discussed in detail, and it is pointed out that the crack failure mode is tensile failure. The change trends of bearing capacity, acoustic emission quantity, and acoustic emission energy of three typical failure modes are analyzed. The maximum bearing capacity, the maximum acoustic emission quantity, and energy of three failure modes of concrete three-point bending beams generally show an increasing trend.


Sign in / Sign up

Export Citation Format

Share Document