Modified Operand Decomposition Multiplication for High Performance Parallel Multipliers

2016 ◽  
Vol 25 (12) ◽  
pp. 1650149 ◽  
Author(s):  
Z. Abid ◽  
Dalia A. El-Dib ◽  
Rizwan Mudassir
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Dissipation ◽  
High Performance ◽  
Energy Delay Product

A low power operand decomposition multiplication architecture implementation is modified to further reduce its power dissipation and delay. First, the multiplier’s implementation was modified to generate the partial products using NAND gates instead of AND and OR gates in order to reduce the number of transistors (area utilized) and to reduce the delay. Then, new types of adders and (4:2) compressors, that accept negatively weighted bits are used to reduce the number of inverters. Therefore, the resulting multiplier architecture reduces the number of transistors significantly. These modifications result in 20% and 36% reduction in power consumption and energy delay product (EDP), respectively.

Analytical Study Of Full Adder Circuit Using Modified Glitch Free Cascadable Adiabatic Logic

2018 ◽  
Vol 3 (2) ◽  
Author(s):  
Neha Raghav ◽  
◽  
Malti Bansal
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Dissipation ◽  
High Performance ◽  
Analytical Study ◽  
Supply Voltage ◽  
Full Adder ◽  
Vlsi Circuits ◽  
Low Power Consumption ◽  
Adiabatic Logic

Nowadays, power dissipation is among the most dominant concerns in designing a VLSI circuits. Endless improvement in technology has points to an increased requirement for devices which have the basic characteristic of low power consumption. Hence power has turn into a demanding design parameter in low power and high-performance applications. The Adiabatic logic technique is becoming a solution to the dilemma of power dissipation. Adders with huge power consumption affect the overall efficiency of the system. Hence, in this paper, the proposed application of full adder circuit is shown using the Modified Glitch Free Cascadable Adiabatic Logic. The circuit is compared with the conventional CMOS Logic and the power dissipation analysis is simulated with supply voltage = 0.9 V, 1.2 V and 1.8 V to analyze the pattern followed with supply variation at different temperature range. Similarly, the calculation of delay is performed for temperature values of 27˚C, 55˚C and 120˚C at 90nm technology.

Efficient Instruction and Data Caching for High Performance Embedded Processors

1970 ◽  
pp. 9
Author(s):  
A. Ferrerón Labari ◽  
D. Suárez Gracia ◽  
V. Viñals Yúfera
Keyword(s):  
Embedded Systems ◽  
Power Consumption ◽  
Low Power ◽  
Interconnection Networks ◽  
High Performance ◽  
Critical Issue ◽  
Content Management ◽  
Structure Design ◽  
Portable Devices ◽  
On Chip

In the last years, embedded systems have evolved so that they offer capabilities we could only find before in high performance systems. Portable devices already have multiprocessors on-chip (such as PowerPC 476FP or ARM Cortex A9 MP), usually multi-threaded, and a powerful multi-level cache memory hierarchy on-chip. As most of these systems are battery-powered, the power consumption becomes a critical issue. Achieving high performance and low power consumption is a high complexity challenge where some proposals have been already made. Suarez et al. proposed a new cache hierarchy on-chip, the LP-NUCA (Low Power NUCA), which is able to reduce the access latency taking advantage of NUCA (Non-Uniform Cache Architectures) properties. The key points are decoupling the functionality, and utilizing three specialized networks on-chip. This structure has been proved to be efficient for data hierarchies, achieving a good performance and reducing the energy consumption. On the other hand, instruction caches have different requirements and characteristics than data caches, contradicting the low-power embedded systems requirements, especially in SMT (simultaneous multi-threading) environments. We want to study the benefits of utilizing small tiled caches for the instruction hierarchy, so we propose a new design, ID-LP-NUCAs. Thus, we need to re-evaluate completely our previous design in terms of structure design, interconnection networks (including topologies, flow control and routing), content management (with special interest in hardware/software content allocation policies), and structure sharing. In CMP environments (chip multiprocessors) with parallel workloads, coherence plays an important role, and must be taken into consideration.

Performance Analysis of Various Multipliers Using 8T-full Adder with 180nm Technology

2020 ◽  
Vol 13 (6) ◽  
pp. 864-870
Author(s):  
Sai Venkatramana Prasada G.S ◽  
G. Seshikala ◽  
S. Niranjana
Keyword(s):  
Low Power ◽  
Power Dissipation ◽  
High Speed ◽  
High Performance ◽  
Full Adder ◽  
Fundamental Operation ◽  
Wallace Tree ◽  
Power Delay Product ◽  
The Comparative Study ◽  
Wallace Tree Multiplier

Background: This paper presents the comparative study of power dissipation, delay and power delay product (PDP) of different full adders and multiplier designs. Methods: Full adder is the fundamental operation for any processors, DSP architectures and VLSI systems. Here ten different full adder structures were analyzed for their best performance using a Mentor Graphics tool with 180nm technology. Results: From the analysis result high performance full adder is extracted for further higher level designs. 8T full adder exhibits high speed, low power delay and low power delay product and hence it is considered to construct four different multiplier designs, such as Array multiplier, Baugh Wooley multiplier, Braun multiplier and Wallace Tree multiplier. These different structures of multipliers were designed using 8T full adder and simulated using Mentor Graphics tool in a constant W/L aspect ratio. Conclusion: From the analysis, it is concluded that Wallace Tree multiplier is the high speed multiplier but dissipates comparatively high power. Baugh Wooley multiplier dissipates less power but exhibits more time delay and low PDP.

scholarly journals Ultracompact and low-power-consumption silicon thermo-optic switch for high-speed data

Nanophotonics ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 937-945
Author(s):  
Ruihuan Zhang ◽  
Yu He ◽  
Yong Zhang ◽  
Shaohua An ◽  
Qingming Zhu ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
High Performance ◽  
Pulse Amplitude ◽  
Telecommunication Networks ◽  
Low Power Consumption ◽  
Power Efficient ◽  
High Speed Data ◽  
On Chip

AbstractUltracompact and low-power-consumption optical switches are desired for high-performance telecommunication networks and data centers. Here, we demonstrate an on-chip power-efficient 2 × 2 thermo-optic switch unit by using a suspended photonic crystal nanobeam structure. A submilliwatt switching power of 0.15 mW is obtained with a tuning efficiency of 7.71 nm/mW in a compact footprint of 60 μm × 16 μm. The bandwidth of the switch is properly designed for a four-level pulse amplitude modulation signal with a 124 Gb/s raw data rate. To the best of our knowledge, the proposed switch is the most power-efficient resonator-based thermo-optic switch unit with the highest tuning efficiency and data ever reported.

A LOW-POWER AND HIGH-SPEED D FLIP-FLOP USING A SINGLE LATCH

2002 ◽  
Vol 11 (01) ◽  
pp. 51-55
Author(s):  
ROBERT C. CHANG ◽  
L.-C. HSU ◽  
M.-C. SUN
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Dissipation ◽  
High Speed ◽  
Operating Frequency ◽  
Flip Flop ◽  
Lower Power ◽  
Simulation Results ◽  
Hspice Simulation

A novel low-power and high-speed D flip-flop is presented in this letter. The flip-flop consists of a single low-power latch, which is controlled by a positive narrow pulse. Hence, fewer transistors are used and lower power consumption is achieved. HSPICE simulation results show that power dissipation of the proposed D flip-flop has been reduced up to 76%. The operating frequency of the flip-flop is also greatly increased.

scholarly journals A HIGH-PERFORMANCE AND LOW-POWER DELAY BUFFER

2013 ◽  
pp. 78-82
Author(s):  
GOPALA KRISHNA.M ◽  
UMA SANKAR.CH ◽  
NEELIMA. S ◽  
KOTESWARA RAO.P
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
High Performance ◽  
Vlsi Design ◽  
Flip Flop ◽  
Ring Counter ◽  
Double Edge ◽  
Low Power Cmos ◽  
Cmos Vlsi

In this paper, presents circuit design of a low-power delay buffer. The proposed delay buffer uses several new techniques to reduce its power consumption. Since delay buffers are accessed sequentially, it adopts a ring-counter addressing scheme. In the ring counter, double-edge-triggered (DET) flip-flops are utilized to reduce the operating frequency by half and the C-element gated-clock strategy is proposed. Both total transistor count and the number of clocked transistors are significantly reduced to improve power consumption and speed in the flip-flop. The number of transistors is reduced by 56%-60% and the Area-Speed-Power product is reduced by 56%-63% compared to other double edge triggered flip-flops. This design is suitable for high-speed, low-power CMOS VLSI design applications.

Rack Server Solution in Data Center

2015 ◽  
Author(s):  
Sheng Kang ◽  
Guofeng Chen ◽  
Chun Wang ◽  
Ruiquan Ding ◽  
Jiajun Zhang ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
Power Supply ◽  
Data Center ◽  
Power Efficiency ◽  
High Performance ◽  
High Efficiency ◽  
High Growth ◽  
General Purpose ◽  
Power Supplies

With the advent of big data and cloud computing solutions, enterprise demand for servers is increasing. There is especially high growth for Intel based x86 server platforms. Today’s datacenters are in constant pursuit of high performance/high availability computing solutions coupled with low power consumption and low heat generation and the ability to manage all of this through advanced telemetry data gathering. This paper showcases one such solution of an updated rack and server architecture that promises such improvements. The ability to manage server and data center power consumption and cooling more completely is critical in effectively managing datacenter costs and reducing the PUE in the data center. Traditional Intel based 1U and 2U form factor servers have existed in the data center for decades. These general purpose x86 server designs by the major OEM’s are, for all practical purposes, very similar in their power consumption and thermal output. Power supplies and thermal designs for server in the past have not been optimized for high efficiency. In addition, IT managers need to know more information about servers in order to optimize data center cooling and power use, an improved server/rack design needs to be built to take advantage of more efficient power supplies or PDU’s and more efficient means of cooling server compute resources than from traditional internal server fans. This is the constant pursuit of corporations looking at new ways to improving efficiency and gaining a competitive advantage. A new way to optimize power consumption and improve cooling is a complete redesign of the traditional server rack. Extracting internal server power supplies and server fans and centralizing these within the rack aims to achieve this goal. This type of design achieves an entirely new low power target by utilizing centralized, high efficiency PDU’s that power all servers within the rack. Cooling is improved by also utilizing large efficient rack based fans for airflow to all servers. Also, opening up the server design is to allow greater airflow across server components for improved cooling. This centralized power supply breaks through the traditional server power limits. Rack based PDU’s can adjust the power efficiency to a more optimum point. Combine this with the use of online + offline modes within one single power supply. Cold backup makes data center power to achieve optimal power efficiency. In addition, unifying the mechanical structure and thermal definitions within the rack solution for server cooling and PSU information allows IT to collect all server power and thermal information centrally for improved ease in analyzing and processing.

scholarly journals A Glitch-Free Novel DET-FF in 22 nm CMOS for Low-Power Application

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Sumitra Singar ◽  
N. K. Joshi ◽  
P. K. Ghosh
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Performance ◽  
Vlsi Design ◽  
Total System ◽  
Clock Frequency ◽  
Flip Flop ◽  
Digital Vlsi ◽  
Feedback Structure ◽  
Power Application

Dual edge triggered (DET) techniques are most liked choice for the researchers in the field of digital VLSI design because of its high-performance and low-power consumption standard. Dual edge triggered techniques give the similar throughput at half of the clock frequency as compared to the single edge triggered (SET) techniques. Dual edge triggered techniques can reduce the 50% power consumption and increase the total system power savings. The low-power glitch-free novel dual edge triggered flip-flop (DET-FF) design is proposed in this paper. Still now, existing DET-FF designs are constructed by using either C-element circuit or 1P-2N structure or 2P-1N structure, but the proposed novel design is designed by using the combination of C-element circuit and 2P-1N structure. In this design, if any glitch affects one of the structures, then it is nullified by the other structure. To control the input loading, the two circuits are merged to share the transistors connected to the input. In the proposed design, we have used an internal dual feedback structure. The proposed design reduces the delay and power consumption and increases the speed and efficiency of the system.

scholarly journals 2.4 GHZ HETERODYNE RECEIVER FOR HEALTHCARE APPLICATION

2016 ◽  
Vol 8 (2) ◽  
pp. 22 ◽  
Author(s):  
Wei Cai ◽  
Frank Shi
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Performance ◽  
Tuning Range ◽  
Low Noise ◽  
Heterodyne Receiver ◽  
The Third ◽  
Noise Amplifier ◽  
Lc Tank ◽  
Down Conversion

<p class="lead">The objective of this research was to design a basic 2.4 GHz heterodyne receiver for healthcare on a 130um CMOS process. The ultimate goal for the wireless industry is to minimize the trade-offs between performance and cost, and between performance and low power consumption design. In the first part, a low noise amplifier (LNA), which is commonly used as the first stage of a receiver, is introduced and simulated. LNA performance greatly affects the overall receiver performance. The LNA was designed at the 2.4 GHz ISM band, using the cascode with an inductive degeneration topology. The second part of this thesis presents a low power 2.4 GHz down conversion Gilbert Cell mixer. In the third part, a high-performance LC-tank CMOS VCO was designed at 2.4 GHz. The design uses using PMOS cross-coupled topology with the varactor for wider tuning range topology. In the first part, a low noise amplifier (LNA) design reaches the NF of 2 dB, has a power consumption of 2.2 mW, and has a gain of 20dB. The second part of this proposal presents a low power 2.4 GHz down conversion Gilbert Cell mixer. The obtained result shows a conversion gain of 14.6 dB and power consumption of 8.2 mW at a 1.3V supply voltage. In the third part, a high-performance LC-tank CMOS VCO was designed at 2.4 GHz. The final simulation of the phase noise is-128 dBc/Hz, and the tuning range is 2.3 GHz-2.5 GHz while the total power consumption is 3.25 mW.<strong> </strong>The performance of the receiver meets the specification requirements of the desired standard.</p>

Sign in / Sign up

Export Citation Format

Share Document