Copper Metallization Needs for Wafer-Level, Three-Dimensional Integration

2005 ◽  
Keyword(s):  
Three Dimensional ◽  
Copper Metallization ◽  
Wafer Level

scholarly journals Reliability Evaluation of Fan-Out Type 3D Packaging-On-Packaging

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 295
Author(s):  
Pao-Hsiung Wang ◽  
Yu-Wei Huang ◽  
Kuo-Ning Chiang
Keyword(s):  
Finite Element ◽  
Thermal Cycling ◽  
Glass Substrate ◽  
High Speed ◽  
Coefficient Of Thermal Expansion ◽  
Three Dimensional ◽  
Design Parameters ◽  
Time To Failure ◽  
Wafer Level ◽  
Fine Pitch

The development of fan-out packaging technology for fine-pitch and high-pin-count applications is a hot topic in semiconductor research. To reduce the package footprint and improve system performance, many applications have adopted packaging-on-packaging (PoP) architecture. Given its inherent characteristics, glass is a good material for high-speed transmission applications. Therefore, this study proposes a fan-out wafer-level packaging (FO-WLP) with glass substrate-type PoP. The reliability life of the proposed FO-WLP was evaluated under thermal cycling conditions through finite element simulations and empirical calculations. Considering the simulation processing time and consistency with the experimentally obtained mean time to failure (MTTF) of the packaging, both two- and three-dimensional finite element models were developed with appropriate mechanical theories, and were verified to have similar MTTFs. Next, the FO-WLP structure was optimized by simulating various design parameters. The coefficient of thermal expansion of the glass substrate exerted the strongest effect on the reliability life under thermal cycling loading. In addition, the upper and lower pad thicknesses and the buffer layer thickness significantly affected the reliability life of both the FO-WLP and the FO-WLP-type PoP.

Package Thickness - Ultrathin WLFO (Wafer-Level Fan-Out)

2016 ◽  
Vol 2016 (1) ◽  
pp. 000305-000308
Author(s):  
Eoin O'Toole ◽  
Steffen Kroehnert ◽  
José Campos ◽  
Virgilio Barbosa ◽  
Leonor Dias
Keyword(s):  
System Integration ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Battery Life ◽  
Wafer Level ◽  
Display Area ◽  
Solder Balls ◽  
Bga Package ◽  
Wafer Processing ◽  
Semiconductor Packages

Abstract NANIUM's Fan-Out Wafer-Level Packaging technology WLFO (Wafer-Level Fan-Out) is based on embedded Wafer-Level Ball Grid Array technology eWLB of Infineon Technologies [1]. Since it′s invention almost 10 years ago, it became the leading technology for Fan-Out Wafer-Level packages. The WLFO technology is based upon the reconstitution of KGD (known good die) from incoming device wafer, independent of wafer diameter and material, to recon wafer format of active semiconductor dies or other active/passive components separated by mold compound applied through compression molding on a temporary mold carrier. The resulting recon wafer can be processed in standard wafer processing equipment. One of the challenges for the future of semiconductor packaging is reduction of the board level volume real estate occupied by each component. With the drive towards lower profile end user devices incorporating large display area and battery life the three dimensional space available for semiconductor packages is diminishing. It is well known that WLFO single die packaging but even more significant system integration enables the shrinkage of the XY footprint of the package through flexible very dense heterogeneous system-in-package integration [2]. But one of the disruptive advantages of the substrate-less WLFO technology is to also permit significant reduction of the overall package height (Z). A total package height for a BGA package including solder balls <500um and for a LGA package with solder land pads only <300um is achievable today, and further development towards even thinner packages is on the way.

Wafer Level Assembly Technique Development for Fine Pitch Flip Chip 3D Die-to-Wafer Integration

2010 ◽  
Vol 2010 (1) ◽  
pp. 000548-000553
Author(s):  
Zhaozhi Li ◽  
Brian J. Lewis ◽  
Paul N. Houston ◽  
Daniel F. Baldwin ◽  
Eugene A. Stout ◽  
...  
Keyword(s):  
Flip Chip ◽  
Low Cost ◽  
Three Dimensional ◽  
Cost Effective ◽  
Market Demand ◽  
Wafer Level ◽  
Packaging Technology ◽  
Fine Pitch ◽  
3D Packaging ◽  
Assembly Technique

Three Dimensional (3D) Packaging has become an industry obsession as the market demand continues to grow toward higher packaging densities and smaller form factor. In the meanwhile, the 3D die-to-wafer (D2W) packaging structure is gaining popularity due to its high manufacturing throughput and low cost per package. In this paper, the development of the assembly process for a 3D die-to-wafer packaging technology, that leverages the wafer level assembly technique and flip chip process, is introduced. Research efforts were focused on the high-density flip chip wafer level assembly techniques, as well as the challenges, innovations and solutions associated with this type of 3D packaging technology. Processing challenges and innovations addressed include flip chip fluxing methods for very fine-pitch and small bump sizes; wafer level flip chip assembly program creation and yield improvements; and set up of the Pb-free reflow profile for the assembled wafer. 100% yield was achieved on the test vehicle wafer that has totally 1,876 flip chip dies assembled on it. This work has demonstrated that the flip chip 3D die-to-wafer packaging architecture can be processed with robust yield and high manufacturing throughput, and thus to be a cost effective, rapid time to market alternative to emerging 3D wafer level integration methodologies.

Damascene-Patterned Metal-Adhesive (Cu-BCB) Redistribution Layers

2006 ◽  
Vol 970 ◽  
Author(s):  
Ronald J. Gutmann ◽  
J. Jay McMahon ◽  
Jian-Qiang Lu
Keyword(s):  
Bonding Strength ◽  
Adhesive Bonding ◽  
Process Integration ◽  
Three Dimensional ◽  
Adhesive Layer ◽  
Wafer Level ◽  
Technology Platform ◽  
Metal Bonding ◽  
Wafer Level Packaging ◽  
Metal Metal

ABSTRACTA monolithic, wafer-level three-dimensional (3D) technology platform is described that is compatible with next-generation wafer level packaging (WLP) processes. The platform combines the advantages of both (1) high bonding strength and adaptability to IC wafer topography variations with spin-on dielectric adhesive bonding and (2) process integration and via-area advantages of metal-metal bonding. A copper-benzocyclobutene (Cu-BCB) process is described that incorporates single-level damascene-patterned Cu vias with partially-cured BCB as the bonding adhesive layer. A demonstration vehicle consisting of a two-wafer stack of 2-4 μm diameter vias has shown the bondability of both Cu-to-Cu and BCB-to-BCB. Planarization conditions to achieve BCB-BCB bonding with low-resistance Cu-Cu contacts have been examined, with wafer-scale planarization requirements compared to other 3D platforms. Concerns about stress induced at the tantalum (Ta) liner-to-BCB interface resulting in partial delamination are discussed. While across-wafer uniformity has not been demonstrated, the viability of this WLP-compatible 3D platform has been shown.

CMP Compatibility of Partially Cured Benzocyclobutene (BCB) for a Via-First 3D IC Process

2005 ◽  
Vol 867 ◽  
Author(s):  
J. J. McMahon ◽  
F. Niklaus ◽  
R. J. Kumar ◽  
J. Yu ◽  
J.Q. Lu ◽  
...  
Keyword(s):  
High Performance ◽  
Removal Rate ◽  
Three Dimensional ◽  
Surface Damage ◽  
Wafer Level ◽  
Razor Blade ◽  
3D Ic ◽  
3D Technology ◽  
Process Step ◽  
Wide Range

AbstractWafer-level three dimensional (3D) IC technology offers the promise of decreasing RC delays by reducing long interconnect lines in high performance ICs. This paper focuses on a viafirst 3D IC platform, which utilizes a back-end-of-line (BEOL) compatible damascene-patterned layer of copper and Benzocyclobutene (BCB). This damascene-patterned copper/BCB serves as a redistribution layer between two fully fabricated wafer sets of ICs and offers the potential of high bonding strength and low contact resistance for inter-wafer interconnects between the wafer pair. The process would thus combine the electrical advantages of 3D technology using Cu-to-Cu bonding with the mechanical advantages of 3D technology using BCB-to-BCB bonding.In this work, partially cured BCB has been evaluated for copper damascene patterning using commercially available CMP slurries as a key process step for a via-first 3D process flow. BCB is spin-cast on 200 mm wafers and cured at temperatures ranging from 190°C to 250°C, providing a wide range of crosslink percentage. These films are evaluated for CMP removal rate, surface damage (surface scratching and embedded abrasives), and planarity with commercially available copper CMP slurries. Under baseline process parameters, erosion, and roughness changes are presented for single-level damascene test patterns. After wafers are bonded under controlled temperature and pressure, the bonding interface is inspected optically using glass-to-silicon bonded wafers, and the bond strength is evaluated by a razor blade test.

200. mm Silicon Wafer-to-Wafer Bonding with Thin Ti Layer under BEOL-Compatible Process Conditions

2004 ◽  
Vol 843 ◽  
Author(s):  
J. Yu ◽  
J. J. McMahon ◽  
J.-Q. Lu ◽  
R. J. Gutmann
Keyword(s):  
Wafer Bonding ◽  
Three Dimensional ◽  
Complete Removal ◽  
External Pressure ◽  
Reduced Form ◽  
Process Conditions ◽  
Manufacturing Cost ◽  
Wafer Level ◽  
Integrity Test ◽  
Wafer Pair

ABSTRACTWafer level monolithic three-dimensional (3D) integration is an emerging technology to realize enhanced performance and functionality with reduced form-factor and manufacturing cost. The cornerstone for this 3D processing technology is full-wafer bonding under back-end-of-the-line (BEOL) compatible process conditions. For the first time to our knowledge, we demonstrate nearly void-free 200 mm wafer-to-wafer bonding with an ultra-thin Ti adhesive coating, annealed at BEOL-compatible temperature (400 °C) in vacuum with external pressure applied. Mechanical integrity test showed that bonded wafer pair survived after a stringent three-step thinning process (grinding/polishing/wet-etching) with complete removal of top Si wafer, while allowing optical inspection of bonding interface. Mechanisms contributing to the strong bonding at Ti/Si interface are briefly discussed.

Reliable Design of TSV in Free-Standing Wafers and 3D Integrated Packages

2011 ◽  
Author(s):  
Xi Liu ◽  
Margaret Simmons-Matthews ◽  
Kurt P. Wachtler ◽  
Suresh K. Sitaraman
Keyword(s):  
Integrated Circuit ◽  
Mechanical Performance ◽  
Semiconductor Industry ◽  
Three Dimensional ◽  
Wafer Level ◽  
Free Standing ◽  
Design Factor ◽  
Reliable Design ◽  
Reliability Issue ◽  
Key Enabling Technologies

Through-silicon via (TSV), being one of the key enabling technologies for three dimensional (3D) Integrated Circuit (IC) stacking, silicon interposer technology, and advanced wafer level packaging (WLP), has attracted tremendous interest throughout the semiconductor industry. However, limited work addresses TSV reliability issue, and most of the existing reliability studies focus on the thermo-mechanical performance of TSVs in a free-standing wafer, rather than in an integrated package. In this paper, three-dimensional thermomechanical Finite-Element (FE) models with TSVs in both free-standing wafers and 3D integrated packages have been built and analyzed. In addition, Design of Experiments (DOE) based approach has been used to understand the effect of various parameters. Results show that the selection of underfill materials between stacked dies is the most dominating design factor for TSV/microbump reliability.

Sign in / Sign up

Export Citation Format

Share Document