scholarly journals Facile Solventless Synthesis of a Nylon-6,6/Silver Nanoparticles Composite and Its XPS Study

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Raúl A. Morales-Luckie ◽  
Víctor Sánchez-Mendieta ◽  
Oscar Olea-Mejia ◽  
Alfredo R. Vilchis-Nestor ◽  
Gustavo López-Téllez ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Chemical Reduction ◽  
Silver Ions ◽  
Ambient Conditions ◽  
Tem Analysis ◽  
Simple Method ◽  
Transmission Electron ◽  
Nylon 6,6 ◽  
Xps Study

Silver nanoparticles were synthesized and supported on thin nylon membranes by means of a simple method of impregnation and chemical reduction of Ag ions at ambient conditions. Particles of less than 10 nm were obtained using this methodology, in which the nylon fibers behave as constrained nanoreactors. Pores on nylon fibres along with oxygen and nitrogen from amide moieties in nylon provide effective sites forin situreduction of silver ions and for the formation and stabilization of Ag nanoparticles. Transmission electron microscopy (TEM) analysis showed that silver nanoparticles are well dispersed throughout the nylon fibers. Furthermore, an interaction between nitrogen of amides moieties of nylon-6,6 and silver nanoparticles has been found by X-ray photoelectron spectroscopy (XPS).

scholarly journals Optimization of biogenic synthesis of silver nanoparticles from flavonoid-rich Clinacanthus nutans leaf and stem aqueous extracts

2020 ◽  
Vol 7 (7) ◽  
pp. 200065 ◽  
Author(s):  
Siti Nur Aishah Mat Yusuf ◽  
Che Nurul Azieyan Che Mood ◽  
Nor Hazwani Ahmad ◽  
Doblin Sandai ◽  
Chee Keong Lee ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Functional Groups ◽  
Silver Ions ◽  
Cost Effective ◽  
Aqueous Extracts ◽  
Tem Analysis ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
The Face ◽  
Clinacanthus Nutans

Background : Silver nanoparticles (AgNPs) are widely used in food industries, biomedical, dentistry, catalysis, diagnostic biological probes and sensors. The use of plant extract for AgNPs synthesis eliminates the process of maintaining cell culture and the process could be scaled up under a non-aseptic environment. The purpose of this study is to determine the classes of phytochemicals, to biosynthesize and characterize the AgNPs using Clinacanthus nutans leaf and stem extracts. In this study, AgNPs were synthesized from the aqueous extracts of C. nutans leaves and stems through a non-toxic, cost-effective and eco-friendly method. Results : The formation of AgNPs was confirmed by UV-Vis spectroscopy, and the size of AgNP-L (leaf) and AgNP-S (stem) were 114.7 and 129.9 nm, respectively. Transmission electron microscopy (TEM) analysis showed spherical nanoparticles with AgNP-L and AgNP-S ranging from 10 to 300 nm and 10 to 180 nm, with average of 101.18 and 75.38 nm, respectively. The zeta potentials of AgNP-L and AgNP-S were recorded at −42.8 and −43.9 mV. X-ray diffraction analysis matched the face-centred cubic structure of silver and was capped with bioactive compounds. Fourier transform infrared spectrophotometer analysis revealed the presence of few functional groups of phenolic and flavonoid compounds. These functional groups act as reducing agents in AgNPs synthesis. Conclusion : These results showed that the biogenically synthesized nanoparticles reduced silver ions to silver nanoparticles in aqueous condition and the AgNPs formed were stable and less toxic.

scholarly journals Size Control of Synthesized Silver Nanoparticles by Simultaneous Chemical Reduction and Laser Fragmentation in Origanum majorana Extract: Antibacterial Application

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2326
Author(s):  
Entesar Ali Ganash ◽  
Reem Mohammad Altuwirqi
Keyword(s):  
Silver Nanoparticles ◽  
Irradiation Time ◽  
Chemical Reduction ◽  
Size Control ◽  
Reduction Process ◽  
Laser Wavelength ◽  
X Ray Diffraction ◽  
Ag Nps ◽  
Transmission Electron ◽  
Origanum Majorana

In this work, silver nanoparticles (Ag NPs) were synthesized using a chemical reduction approach and a pulsed laser fragmentation in liquid (PLFL) technique, simultaneously. A laser wavelength of 532 nm was focused on the as produced Ag NPs, suspended in an Origanum majorana extract solution, with the aim of controlling their size. The effect of liquid medium concentration and irradiation time on the properties of the fabricated NPs was studied. While the X-ray diffraction (XRD) pattern confirmed the existence of Ag NPs, the UV–Vis spectrophotometry showed a significant absorption peak at about 420 nm, which is attributed to the characteristic surface plasmon resonance (SPR) peak of the obtained Ag NPs. By increasing the irradiation time and the Origanum majora extract concentration, the SPR peak shifted toward a shorter wavelength. This shift indicates a reduction in the NPs’ size. The effect of PLFL on size reduction was clearly revealed from the transmission electron microscopy images. The PLFL technique, depending on experimental parameters, reduced the size of the obtained Ag NPs to less than 10 nm. The mean zeta potential of the fabricated Ag NPs was found to be greater than −30 mV, signifying their stability. The Ag NPs were also found to effectively inhibit bacterial activity. The PLFL technique has proved to be a powerful method for controlling the size of NPs when it is simultaneously associated with a chemical reduction process.

The electrocatalytic response of metallophthalocyanines when clicked to electrodes and to nanomaterials

2021 ◽  
Author(s):  
◽  
Lekhetho Simon Mpeta
Keyword(s):  
Hydrogen Peroxide ◽  
Silver Nanoparticles ◽  
Zinc Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrocatalytic Activity ◽  
Electrochemical Impedance ◽  
Modified Electrodes ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Electrochemical Microscopy

Conjugates of nanomaterials and metallophthalocyanines (MPcs) have been prepared and their electrocatalytic activity studied. The prepared nanomaterials are zinc oxide and silver nanoparticles, reduced graphene oxide nanosheets and semiconductor quantum dots. The MPcs used in this work are cobalt (II) (1a), manganese(III) (1b) and iron (II) (1c) 2,9(10),16(17),23(24)- tetrakis 4-((4-ethynylbenzyl) oxy) phthalocyaninato, 2,9(10),16(17),23(24)- tetrakis(5-pentyn-oxy) cobalt (II) phthalocyaninato (2), 9(10),16(17),23(24)- tris-[4-tert-butylphenoxy)-2- (4-ethylbezyl-oxy) cobalt (II) phthalocyaninato (3), 9(10),16(17),23(24)- tris-[4-tertbutylphenoxy)-2-(pent-4yn-yloxy)] cobalt (II) phthalocyaninato (4), cobalt (II) (5a) and manganese (III) (5b) 2,9(10),16(17),23(24)- tetrakis [4-(4-(5-chloro-1H-benzo [d]imidazol-2-yl)phenoxy] phthalocyaninato and 9(10),16(17),23(24)- tris tert butyl phenoxy- 2- [4-(4-(5-chloro-1H-benzo[d]imidazole-2-yl)phenoxy] cobalt (II) phthalocyaninato (6). Some of these MPcs (1a, 3 and 4) were directly clicked on azide grafted electrode, while some (1b, 1c, 2, 5a and 5b) were clicked to azide functionalised nanomaterials and then drop-dried on the electrodes. One phthalocyanine (5b) was drop-dried on the electrode then silver nanoparticles were electrodeposited on it taking advantage of metal-N bond. Scanning electrochemical microscopy, voltammetry, chronoamperometry, electrochemical impedance spectroscopy are among electrochemical methods used to characterise modified electrodes. Transmission electron microscopy, X-ray photoelectron spectroscopy, Xray diffractometry, Raman spectroscopy and infrared spectroscopy were employed to study surface functionalities, morphology and topography of the nanomaterials and complexes. Electrocatalytic activity of the developed materials were studied towards oxidation of 2-mercaptoethanol, hydrazine and hydrogen peroxide while the reduction study was based on oxygen and hydrogen peroxide. In general, the conjugates displayed superior catalytic activity when compared to individual materials. Complex 2 alone and when conjugated to zinc oxide nanoparticles were studied for their nonlinear optical behaviour. And the same materials were explored for their hydrazine detection capability. The aim of this study was to develop sensitive, selective and affordable sensors for selected organic waste pollutants. Conjugates were found to achieve the aim of the study compared to when individual materials were employed.

scholarly journals A REVIEW: A GREEN APPROACH FOR THE SYNTHESIS OF SILVER NANOPARTICLES AND ITS ANTIBACTERIAL APPLICATIONS

2018 ◽  
Vol 11 (8) ◽  
pp. 74 ◽  
Author(s):  
Shyla Marjorie Haqq ◽  
Amit Chattree
Keyword(s):  
Silver Nanoparticles ◽  
Antimicrobial Properties ◽  
Nanoparticle Synthesis ◽  
Silver Ions ◽  
Multidrug Resistant ◽  
X Ray Diffraction ◽  
Green Approach ◽  
Transmission Electron ◽  
Uv Visible ◽  
Silver Nanoparticle Synthesis

  This review is based on the synthesis of silver nanoparticles (AgNPs) using a green approach which is biofabricated from various medicinal plants. AgNPs were prepared from the various parts of the plants such as the flowers, stems, leaves, and fruits. Various physiochemical characterizations were performed using the ultraviolet (UV)-visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction spectroscopy, transmission electron microscopy, and energy dispersive spectroscopy. AgNPs were also used to inhibit the growth of bacterial pathogens and were found to be effective against both the Gram-positive and Gram-negative bacteria. For the silver to have antimicrobial properties, it must be present in the ionized form. All the forms of silver-containing compounds with the observed antimicrobial properties are in one way or another source of silver ions. Although the antimicrobial properties of silver have been known, it is thought that the silver atoms bind to the thiol groups in enzymes and subsequently leads to the deactivation of enzymes. For the silver to have antimicrobial properties, it must be present in the ionized form. The study suggested that the action of the AgNPs on the microbial cells resulted into cell lysis and DNA damage. AgNPs have proved their candidature as a potential antibacterial against the multidrug-resistant microbes. The biological agents for synthesizing AgNPs cover compounds produced naturally in microbes and plants. Reaction parameters under which the AgNPs were being synthesized hold prominent impact on their size, shape, and application. Silver nanoparticle synthesis and their application are summarized and critically discussed in this review.

Influence of Zr Additive on the Chemical Reduction Behaviour of MoO3 in Carbon Monoxide Atmosphere

2021 ◽  
Vol 317 ◽  
pp. 173-179
Author(s):  
Alinda Samsuri ◽  
Mohd Nor Latif ◽  
Norliza Dzakaria ◽  
Fairous Salleh ◽  
Maratun Ajina Abu Tahari ◽  
...  
Keyword(s):  
Carbon Monoxide ◽  
Molybdenum Trioxide ◽  
Chemical Reduction ◽  
Reduction Process ◽  
Chemical Effect ◽  
Physical Analysis ◽  
Tem Analysis ◽  
Transmission Electron ◽  
Reduction Behaviour ◽  
Temperature Programmed

Temperature-programmed reduction (TPR) was used to observe the chemical reduction behaviour of molybdenum trioxide (MoO3) and zirconia (Zr)-doped MoO3 catalyst by using carbon monoxide (CO) as the reductant. The characterisation of catalysts was performed by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and transmission electron microscopy (TEM) analyses. The reduction performance were examined up to 700°C and reduction was continued for 60 min at 700°C in a stream of 20 vol. % CO in nitrogen. The TPR profile showed that the doped MoO­3 catalyst was slightly moved to a higher temperature (580°C) as compared to the undoped MoO3 catalyst, which began at around 550°C. The interaction between zirconia and molybdenum ions in doped MoO3 catalyst led to an increase in the reduction temperature. According to characterisation of the reduction products by using XRD, it revealed that the reduction behaviour of pure MoO3 to MoO2 by CO reductant involved two reduction stages with the formation of Mo4O11 as the intermediate product. Meanwhile, MoO3 catalyst doped with zirconia caused a delay in the reduction process and was proven by the presence of Mo4O11 species at the end of reactions. Physical analysis by using BET showed a slight increase in surface area of 3% Zr-MoO3 from 6.85 m2/g to 7.24 m2/g. As for TEM analysis, black tiny spots located around MoO3 particles revealed that the zirconia was successfully intercalated into MoO3 particles. This confirmed that formation of intermetallic between Zr-MoO3 catalyst will give new chemical and physical properties which has a remarkable chemical effect by disturbing the reduction progression of MoO3 catalyst.

scholarly journals Surface Study of CuO Nanopetals by Advanced Nanocharacterization Techniques with Enhanced Optical and Catalytic Properties

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1298 ◽  
Author(s):  
Muhammad Arif Khan ◽  
Nafarizal Nayan ◽  
Shadiullah Shadiullah ◽  
Mohd Khairul Ahmad ◽  
Chin Fhong Soon
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Properties ◽  
Average Length ◽  
Tem Analysis ◽  
X Ray ◽  
Surface Study ◽  
Transmission Electron ◽  
One Step ◽  
Controlled Morphology ◽  
Xrd Patterns

In the present work, a facile one-step hydrothermal synthesis of well-defined stabilized CuO nanopetals and its surface study by advanced nanocharacterization techniques for enhanced optical and catalytic properties has been investigated. Characterization by Transmission electron microscopy (TEM) analysis confirmed existence of high crystalline CuO nanopetals with average length and diameter of 1611.96 nm and 650.50 nm, respectively. The nanopetals are monodispersed with a large surface area, controlled morphology, and demonstrate the nanocrystalline nature with a monoclinic structure. The phase purity of the as-synthesized sample was confirmed by Raman spectroscopy and X-ray diffraction (XRD) patterns. A significantly wide absorption up to 800 nm and increased band gap were observed in CuO nanopetals. The valance band (VB) and conduction band (CB) positions at CuO surface are measured to be of +0.7 and −1.03 eV, respectively, using X-ray photoelectron spectroscopy (XPS), which would be very promising for efficient catalytic properties. Furthermore, the obtained CuO nanopetals in the presence of hydrogen peroxide ( H 2 O 2 ) achieved excellent catalytic activities for degradation of methylene blue (MB) under dark, with degradation rate > 99% after 90 min, which is significantly higher than reported in the literature. The enhanced catalytic activity was referred to the controlled morphology of monodispersed CuO nanopetals, co-operative role of H 2 O 2 and energy band structure. This work contributes to a new approach for extensive application opportunities in environmental improvement.

scholarly journals Bioinspired Synthesis of Acacia senegal Leaf Extract Functionalized Silver Nanoparticles and Its Antimicrobial Evaluation

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Edwina Olohirere Uzunuigbe ◽  
Abidemi Paul Kappo ◽  
Sixberth Mlowe ◽  
Neerish Revaprasadu
Keyword(s):  
Silver Nanoparticles ◽  
Colour Change ◽  
Silver Ions ◽  
Antibacterial Activities ◽  
Cubic Phase ◽  
X Ray Diffraction ◽  
Leaf Extracts ◽  
Acacia Senegal ◽  
Transmission Electron ◽  
Antimicrobial Evaluation

Synthesizing nanoparticles with the less environmentally malignant approach using plant extract is of great interest; this is because most of the chemical approaches can be very costly, toxic, and time-consuming. Herein, we report the use of Acacia senegal leaf extracts to synthesize silver nanoparticles (AgNPs) using an environmentally greener approach. Silver ions were reduced using the bioactive components of the plant extracts with observable colour change from faint colourless to a brownish solution as indication of AgNP formation. The structural properties of the as-synthesized AgNPs were characterized using powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and UV-Vis absorption spectrum. Antimicrobial assessment of the as-synthesized AgNPs was explored on some strains of gram-positive and gram-negative bacteria. The obtained results indicate that the as-synthesized AgNPs are pure crystallite of cubic phase of AgNPs, fairly dispersed with a size range of 10–19 nm. The AgNPs were found to be small in size and exhibit significant antibacterial activities, suggesting that the as-synthesized AgNPs could be used in the pharmaceutical and food industries as bactericidal agents.

scholarly journals Green Synthesis of Silver Nanoparticles using Salacca zalacca Extract as Reducing Agent and It’s Antibacterial Activity

2019 ◽  
Vol 31 (12) ◽  
pp. 2804-2810
Author(s):  
Anti Kolonial Prodjosantoso ◽  
Oktanio Sigit Prawoko ◽  
Maximus Pranjoto Utomo ◽  
Lis Permana Sari
Keyword(s):  
Escherichia Coli ◽  
Silver Nanoparticles ◽  
Antibacterial Activity ◽  
Staphylococcus Epidermidis ◽  
Silver Ions ◽  
Reduction Reaction ◽  
Face Centered Cubic ◽  
Gram Positive Bacteria ◽  
Transmission Electron ◽  
Face Centered

In this article, the synthesis of silver nanoparticles through a reduction reaction process using Salacca zalacca extract is reported. The AgNPs were characterized using X-ray diffraction, transmission electron microscopy, Fourier transform infrared and UV-visible spectrophotometry methods. The AgNPs antibacterial activity was determined against of Gram-positive bacteria (Staphylococcus epidermidis) and Gram-negative bacteria (Escherichia coli). The main functional groups contained in Salacca zalacca extract are carbonyl, hydroxyl and nitrile groups, which are believed to reduce the silver ions to metal. The surface plasmon resonance values of brownish red AgNPs are in the range of 410 nm to 460 nm. The structure of AgNPs is face centered cubic (FCC). The diameter of silver nanoparticles crystallite is 14.2 ± 2.6 nm. The AgNPs growth inhibition zones of Escherichia coli and Staphylococcus epidermidis are 9.6 mm and 9.2 mm, respectively.

scholarly journals Bactericidal Silver Nanoparticles by Atmospheric Pressure Solution Plasma Processing

Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 874 ◽  
Author(s):  
Janith Weerasinghe ◽  
Wenshao Li ◽  
Rusen Zhou ◽  
Renwu Zhou ◽  
Alexander Gissibl ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Atmospheric Pressure ◽  
Chemical Reduction ◽  
Cost Effective ◽  
Pressure Solution ◽  
Gram Negative Bacteria ◽  
Promising Alternative ◽  
Gram Negative ◽  
Transmission Electron ◽  
Solution Plasma Processing

Silver nanoparticles have applications in plasmonics, medicine, catalysis and electronics. We report a simple, cost-effective, facile and reproducible technique to synthesise silver nanoparticles via plasma-induced non-equilibrium liquid chemistry with the absence of a chemical reducing agent. Silver nanoparticles with tuneable sizes from 5.4 to 17.8 nm are synthesised and characterised using Transmission Electron Microscopy (TEM) and other analytic techniques. A mechanism for silver nanoparticle formation is also proposed. The antibacterial activity of the silver nanoparticles was investigated with gram-positive and gram-negative bacteria. The inhibition of both bacteria types was observed. This is a promising alternative method for the instant synthesis of silver nanoparticles, instead of the conventional chemical reduction route, for numerous applications.

Sign in / Sign up

Export Citation Format

Share Document