scholarly journals Research on Static Triaxial Mechanical Properties of New CementSoil Reinforced with Polypropylene Fiber

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Qiang Wang ◽  
Rui Tang ◽  
Qun Cheng ◽  
Xiankun Wang ◽  
Fang-ling Liu
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Polypropylene Fiber ◽  
Strain Curve ◽  
Friction Angle ◽  
Confining Pressure ◽  
Gypsum Content ◽  
Amplitude Increase ◽  
Dry Soil ◽  
Soil Weight

Through the laboratory test, the mechanical properties of cementsoil with adding desulfurization gypsum, fly ash, and polypropylene fiber were studied. Three different percentages (0%, 0.5%, and 1.0%) of polypropylene fiber were mixed into new cementsoil for which the cement content is 15% of the dry soil weight, the desulfurization gypsum content is 2% of the dry soil weight, and the fly ash content is 1.0% of the dry soil weight. The new cementsoil strength reinforced with polypropylene fiber was studied by triaxial test under different polypropylene fiber mixing ratio, different age, and different confining pressure. The experimental results show that, compared with ordinary soil, the deviatoric stress and the peak shear strength reinforced with polypropylene fiber have different amplitude increase. At the same time, the internal friction angle of new cementsoil with polypropylene fiber increases slightly with the growth of the age. The stress-strain curve of the polypropylene fiber cementsoil has the typical work hardening characteristic and has the characteristics of bulge fracture.

scholarly journals Mechanical Properties, Curing Mechanism, and Microscopic Experimental Study of Polypropylene Fiber Coordinated Fly Ash Modified Cement–Silty Soil

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5441
Author(s):  
Linfang Lu ◽  
Qiang Ma ◽  
Jing Hu ◽  
Qingfu Li
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Strain Curve ◽  
Soil Mass ◽  
Foundation Engineering ◽  
Soil Particles ◽  
Silty Soil ◽  
Curing Mechanism ◽  
Dry Soil ◽  
Modified Soil

Silty soil has the characteristics of low natural moisture content and poor viscosity, and the strength and deformation required for foundation engineering can be satisfied by reinforcing and improving the silt. In order to study the reinforcement and improvement effects of polypropylene (PP) fiber and fly ash (FA) on cement–silty soil, an unconfined compressive strength (UCS) test, scanning electron microscope (SEM) test, and X-ray diffraction (XRD) analysis test were carried out. Cement (mixed amounts are 4%, 8%, 12%, and 16% of dry soil mass) was used as the basic modifier, and PP fiber (mixed amounts are 0%, 0.15%, 0.3%, and 0.45% of dry soil mass) compounded with FA (adding amounts of 0%, 5%, 10%, and 15% of dry soil mass) were used as an external admixture of cement–silty soil to study the mechanical properties, curing mechanism, and microstructure of the modified soil in different ages of 7 d, 14 d, 28 d, and 60 d. The test results show that with the increase in cement and curing age, the UCS of the modified soil increases, and with the increase in the PP fiber and FA, the UCS of the modified soil first increases and then decreases; there is an optimal content of FA and PP fiber, which are 10 and 0.15%, respectively. A large amount of C-S-H and AFt substances are produced inside the modified soil to cover the surface of soil particles or fill in the pores between soil particles, forming a tight spatial network structure and improving the mechanical properties of the cement–soil. The intensity of the diffraction peaks of the mineral components within the modified soils is more influenced by the cement and age, and the effect of FA is weaker. The stress–strain curve of the modified soil is divided into elastic stage, plastic deformation stage, and strain-softening stage, and the specimens in each stage have corresponding deformation characteristics. By analyzing the behavioral characteristics and curing improvement mechanism of modified soil from the duo perspective of macro-mechanical properties and microstructural composition, it can provide some basis for the engineering application of silty soil.

scholarly journals Mechanical Properties, Failure Mode, and Microstructure of Soil-Cement Modified with Fly Ash and Polypropylene Fiber

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Xue-lei Duan ◽  
Jing-shuang Zhang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Fly Ash ◽  
Failure Mode ◽  
Unconfined Compressive Strength ◽  
Polypropylene Fiber ◽  
Peak Strain ◽  
Soil Cement ◽  
Dry Soil ◽  
Rise Phase

In order to investigate the effects of fly ash and polypropylene fiber on mechanical properties, failure mode, and microstructure of soil-cement, the unconfined compression test, splitting tension test, and scanning electron microscopy (SEM) test of soil-cement with different polypropylene fiber contents (0%, 0.1%, 0.2%, 0.3%, 0.4%, and 0.5% by weight of dry soil) and fly ash contents (0%, 4%, 8%, and 12% by weight of dry soil) were carried out. The compressive and tensile strengths, deformation characteristics, failure mode, and microstructure of soil-cement modified with fly ash and polypropylene fiber were analyzed. The results show that the unconfined compressive strength and splitting tensile strength of soil-cement show a trend of increasing first and then decreasing with the increase of polypropylene fiber and fly ash content. Under the condition of 0.4% polypropylene fiber and 8% fly ash, the unconfined compressive strength and the splitting tensile strength are 4.90 MPa and 0.91 MPa, respectively, which increased by 32.79% and 51.67% as compared with the plain soil-cement, respectively. When 8% fly ash was used in the experiment, the unconfined compressive peak strain and the splitting tensile peak strain of the inclusion of 0.4% polypropylene fiber were 0.0410 and 0.0196, respectively. The corresponding peak strains were increased by 20.94% and 68.97% as compared with non-fiber-stabilized soil-cement, respectively. The stress-strain curve of fly ash soil-cement modified with polypropylene fiber can be divided into compaction phase, linear rise phase, nonlinear rise phase, and failure phase. Polypropylene fiber constrains the lateral deformation of fly ash soil-cement, which improves the peak strain and the failure mode of soil-cement.

scholarly journals Mechanical Properties of Soft Soil considering the Influence of Unloading Stress Paths

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Wei Huang ◽  
Junjie Li ◽  
Yuming Lu ◽  
Dongsheng Li ◽  
Yaqing Mou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Numerical Analysis ◽  
Soft Soil ◽  
Strain Curve ◽  
Friction Angle ◽  
Confining Pressure ◽  
Stress Path ◽  
Hyperbolic Function ◽  
Mechanical Parameters ◽  
Current Design

The mechanical properties of soft soil are crucial for the design and construction of underground space excavation; however, the current design and numerical analysis of underground spaces consider the loading mechanical parameters, ignoring the influence of the unloading stress path resulting in frequent construction accidents in practice. Here, soft soil in Shenzhen, China, is taken as the research subject, and a series of consolidated-undrained unloading tests are performed. First, K0 consolidation is conducted. Then, unloading tests are performed with different unloading ratios to simulate different unloading stress paths. The test results show that the soft soil deformation characteristics are closely related to the stress path and unloading ratio. Under different unloading ratios, soft soil will undergo compression deformation or rebound deformation. Under unloading conditions, the deviator stress-strain curve satisfies a hyperbolic function and can be normalized with the average consolidation confining pressure. With the increase in the unloading ratio, the initial tangent modulus first decreases and then increases, the cohesion decreases, and the internal friction angle does not change significantly. The loading mechanical parameters are not suitable for numerical calculation in unloading engineering. In this paper, more unloading paths are considered, such as UU1.0 and UU0.5. The results of the study provide a theoretical basis for the calculation of the numerical analysis of the soil body at different depths in rich soft soil pits.

scholarly journals Experimental Study on Physical Mechanical Properties and Microstructure of Diatomite Soil in Zhejiang Province, China

2021 ◽  
Vol 12 (1) ◽  
pp. 387
Author(s):  
Lei Gao ◽  
Yi Luo ◽  
Yingeng Kang ◽  
Mingjun Gao ◽  
Omar Abdulhafidh
Keyword(s):  
Mechanical Properties ◽  
Strain Curve ◽  
Physical And Mechanical Properties ◽  
Friction Angle ◽  
Confining Pressure ◽  
Zhejiang Province ◽  
Dry Density ◽  
High Porosity ◽  
Engineering Project ◽  
Geotechnical Tests

Diatomite soil is a kind of bio-siliceous soil with complex composition and special structure, the physical and mechanical properties of diatomite soil are very important for the engineering project. In this paper, the physical properties, mechanical properties, and microstructure of diatomite soil in Zhejiang Province are studied by geotechnical tests and microscopic tests from the macroscopic and microscopic perspective. The results show that: (1) The diatomite soil has special properties different from other soils, including small particle size, low specific gravity value, high liquid-plastic limit, and low compressibility, and the strength indexes c and φ of diatomite soil will decrease with an increase in soil water content; (2) in the triaxial test, when the dry density of diatomite soil increases from 1.30 g/cm3 to 1.50 g/cm3, the effective internal friction angle of diatomite soil increases from 5.6° to 14.5° and the effective cohesion increases from 30.9 kPa to 49.6 kPa. The stress–strain curve of diatomite soil changes from weak softening type to weak hardening type when the confining pressure is above 200 kPa; (3) the diatomite soil has high porosity due to its unique microstructure; it is rich in aluminum oxides and minerals, which will greatly reduce the engineering performance of diatomite soil.

scholarly journals Discrete Element Simulation Analysis of Biaxial Mechanical Properties of Concrete with Large-Size Recycled Aggregate

2021 ◽  
Vol 13 (13) ◽  
pp. 7498
Author(s):  
Tan Li ◽  
Jianzhuang Xiao
Keyword(s):  
Mechanical Properties ◽  
Stress State ◽  
Strain Curve ◽  
Confining Pressure ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Aggregate Model ◽  
Large Size

Concrete made with large-size recycled aggregates is a new kind of recycled concrete, where the size of the recycled aggregate used is 25–80 mm, which is generally three times that of conventional aggregate. Thus, its composition and mechanical properties are different from that of conventional recycled concrete and can be applied in large-volume structures. In this study, recycled aggregate generated in two stages with randomly distributed gravels and mortar was used to replace the conventional recycled aggregate model, to observe the internal stress state and cracking of the large-size recycled aggregate. This paper also investigated the mechanical properties, such as the compressive strength, crack morphology, and stress–strain curve, of concrete with large-size recycled aggregates under different confining pressures and recycled aggregate incorporation ratios. Through this research, it was found that when compared with conventional concrete, under the confining pressure, the strength of large-size recycled aggregate concrete did not decrease significantly at the same stress state, moreover, the stiffness was increased. Confining pressure has a significant influence on the strength of large-size recycled aggregate cocrete.

Strength and Deformation Characteristics of Stabilized Silty Soil

2012 ◽  
Vol 594-597 ◽  
pp. 512-515
Author(s):  
Zheng Rong Zhao ◽  
Hong Xia Yang
Keyword(s):  
Internal Friction ◽  
Brittle Failure ◽  
Yellow River ◽  
Strain Curve ◽  
Friction Angle ◽  
Confining Pressure ◽  
Alluvial Plain ◽  
The Yellow River ◽  
Stress Strain Curve ◽  
Silty Soil

Combined with the silty soil characteristics of the Yellow River alluvial plain and the subgrade filling of Ji-He expressway, the paper discusses silty soil, stabilized silty soil strength and stress-stain characteristics through the indoor triaxial shear test. The results show that the remodeling silty soil has obvious peak, brittle failure, low residual strength after being destroyed and the stress-strain curve shows a softening type in confining pressure 100kPa lower stress level. In the confining pressure 400kPa higher stress level, soil samples peak is not obvious,mainly plastic failure and the stress-strain curve is close to a hardening type. Compared to mixed with 8% lime, stabilized silty soil of mixed with 4% cement and 4% lime shows that the partial stress peak is more obvious when destroyed and the residual strength is drastically reduced and more incline to brittle failure. In different the age, compared to mixed with 8% lime, stabilized silty soil of mixed with 4% cement and 4% lime shows that internal friction angle becomes larger and cohesion improves gradually whose amplitude is much larger than internal friction angle. Therefore, a more effective way to stabilize the silty soil of the Yellow River alluvial plain is to select silty soil mixed with 4% cement and 4% lime.

scholarly journals Experimental Investigation on Mechanical Properties of In Situ Cemented Paste Backfill Containing Coal Gangue and Fly Ash

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Xinguo Zhang ◽  
Shichuan Zhang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Fly Ash ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Friction Angle ◽  
Coal Gangue ◽  
Cemented Paste Backfill ◽  
Paste Backfill

Cemented paste backfill containing coal gangue and fly ash (CGFACPB) is an emerging backfill technique for coal mines that allows environmentally hazardous coal gangue and fly ash to be reused in the underground goaf. Meanwhile, CGFACPB can provide an efficient ground support and reduce the surface subsidence. Due to the difference of consolidation environment between the laboratory and the field, the mechanical properties of the cemented paste backfill vary significantly. In this paper, the core specimens were collected from an underground coal mine where the CGFACPB was used for coal mining, and the mechanical properties of the collected specimens were investigated. The cores were obtained from the underground coal mine, and then the standard cylinders or discs were prepared in laboratory. The uniaxial compressive strength (UCS), Young’s modulus, and Poisson’s ratio were determined by the compression tests, and the tensile strength was achieved by the Brazilian test. Then the internal friction angle and cohesion were calculated using the improved Mohr–Coulomb strength criterion. The results showed the development of UCS can be divided into four stages, and the final long-term stable value was about 5.1 MPa. The development of Young’s modulus had similar trend. Young’s modulus had a range from 550 MPa to 750 MPa and the mean value of 675 MPa. Poisson’s ratio gradually increased with the underground curing duration and eventually approached the stable value of 0.18. The failure type of compression samples was mainly single-sided shear failure. The development of tensile strength can be divided into two stages, and the stable value of the tensile strength was about 1.05 MPa. The development of cohesion can be divided into four stages, and the stable value was about 1.75 MPa. The stable value of the internal friction angle was about 25°. This study can provide significant references for not only the long-term stability evaluation of CGFACPB in the field but also the design of optimal recipe of the cemented paste backfill (CPB).

scholarly journals Experimental study on the thermal damage characteristics of cement stone

2020 ◽  
pp. 317-317
Author(s):  
Feng Xu ◽  
Bowen Qian ◽  
Ling Tan ◽  
Jianqiang Xu ◽  
Shengchuan Tang ◽  
...  
Keyword(s):  
Strain Curve ◽  
Horizontal Wells ◽  
Friction Angle ◽  
Confining Pressure ◽  
Triaxial Tests ◽  
Cement Stone ◽  
Different Temperatures ◽  
Confining Pressures ◽  
Southwest Region ◽  
Sealing Failure

Aiming at the problem of cement ring sealing failure during deep high-temperature shale gas exploitation, comprehensively considering the influence of the characteristics of multi-cluster fracturing of multiple horizontal wells and formation temperature, the cementing cement the southwest region is taken as the research object. After exposure to different temperatures (95?C and 135?C) and for different times (5, 10 and 20 times), axial and triaxial tests with different confining pressures (0, 5 MPa, 15 MPa and 30 MPa) were carried out. The research shows that: (1) the stress-strain curve of cement stone after heat treatment can be divided into four stages: compaction, elastic, yield and post-peak stage. As the confining pressure increases, the compaction phase disappears, the yield phase increases, and we see the transition from brittle to ideal plasticity after the peak; (2) as the temperature and number of thermal cycles increase, the cohesive force decreases significantly, and the internal friction angle shows a slight increase. The elastic modulus and the peak strength decreased.

The Research of Test on Stress-Strain Constitutive Relations of Straw Concrete

2014 ◽  
Vol 584-586 ◽  
pp. 987-992
Author(s):  
Wei Liu ◽  
Wei Xi ◽  
Yi Lu Zhang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Fly Ash ◽  
Constitutive Relations ◽  
Strain Curve ◽  
Green Building ◽  
Corn Straw ◽  
Stress Strain Curve ◽  
Stress Strain

As a new green building material, straw concrete are introduced about its mechanical properties and characteristics. Mechanical properties test such as prism compressive strength, elastic modulus and Poisson's ratios use standard prismatic blocks. Under different rate of corn straw, cement, sand and fly ash, test gets the full stress-strain curve. Results show that with increase of volume of corn straw, the prism compressive strength reduces significantly. Comparing with natural concrete, elastic modulus of straw concrete can reduces greatly. Poisson’s ratio reduces with increase of volume of corn straw. Fly ash could improve property of the material and replace cement, but excessive replacement will reduce the strength of material.

Sign in / Sign up

Export Citation Format

Share Document