scholarly journals Low-Pressure Membrane for Water Treatment Applications

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Huda AlFannakh ◽  
Heba Abdallah ◽  
S. S. Ibrahim ◽  
Basma Souayeh
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Drinking Water ◽  
Humic Acid ◽  
Tap Water ◽  
Permeate Flux ◽  
Membrane Performance ◽  
Polyethersulfone Membrane ◽  
Contaminated Drinking Water

Three ultrafiltration membranes were prepared using phase separation techniques. The membranes were characterized by scan electron microscope, porosity, pore size distribution measurement, and mechanical properties. The membrane performance was carried out using synthetic solutions from humic acid and tap water to express the contaminated drinking water. The polyvinylidene difluoride (M2) has the highest tensile strength 33.2 MPa with elongation of 52.3%, while polyacrylonitrile (M3) has the lowest mechanical properties, tensile strength 16.4 MPa with elongation of 42.7%. Polyethersulfone membrane (M1) provides the highest removal of humic acid, which was 99.5, 98.8, and 98.2% using feed concentrations 0.1, 0.3, and 0.5 g/l, respectively, while M3 provides the highest permeate flux which was 250, 234.4, and 201.4 l/m2 h using feed concentrations 0.1, 0.3, and 0.5 g/l, respectively. Analysis of water samples indicates that the prepared membranes can be used to treat the contaminated drinking water which produced the high quality of drinking water after treatment.

scholarly journals The Influence of Different Plasma Cell Discharges on the Performance Quality of Surgical Gown Samples

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4329
Author(s):  
Atif H. Asghar ◽  
Ahmed Rida Galaly
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Exposure Time ◽  
Electrical Characteristics ◽  
Cathode Fall ◽  
Treatment Efficiency ◽  
Performance Quality ◽  
Surgical Gown ◽  
The One

An experimental study was performed on a low-density plasma discharge using two different configurations of the plasma cell cathode, namely, the one mesh system electrodes (OMSE) and the one mesh and three system electrodes (OMTSE), to determine the electrical characteristics of the plasma such as current–voltage characteristics, breakdown voltage (VB), Paschen curves, current density (J), cathode fall thickness (dc), and electron density of the treated sample. The influence of the electrical characteristics of the plasma fluid in the cathode fall region for different cathode configuration cells (OMSE and OMTSE) on the performance quality of a surgical gown was studied to determine surface modification, treatment efficiency, exposure time, wettability property, and mechanical properties. Over a very short exposure time, the treatment efficiency for the surgical gown surface of plasma over the mesh cathode at a distance equivalent to the cathode fall distance dc values of the OMTSE and for OMSE reached a maximum. The wettability property decreased from 90 to 40% for OMTSE over a 180 s exposure time and decreased from 90 to 10% for OMSE over a 160 s exposure time. The mechanisms of each stage of surgical gown treatment by plasma are described. In this study, the mechanical properties of the untreated and treated surgical gown samples such as the tensile strength and elongation percentage, ultimate tensile strength, yield strength, strain hardening, resilience, toughness, and fracture (breaking) point were studied. Plasma had a more positive effect on the mechanical properties of the OMSE reactor than those of the OMTSE reactor.

Effect of using magnetic water on the mechanical properties of concrete exposed to elevated temperature

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Wasim Barham ◽  
Ammar AL-Maabreh ◽  
Omar Latayfeh
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Elevated Temperature ◽  
Flexural Strength ◽  
Tap Water ◽  
Splitting Tensile Strength ◽  
Content Type ◽  
Normal Water ◽  
Magnetic Water

PurposeThe influence of using magnetic water instead of tap water in the mechanical properties of the concrete exposed to elevated temperatures was investigated. Two concrete mixes were used and cast with the same ingredients. Tap water was used in the first mix and magnetic water was used in the second mix. A total of 48 specimens were cast and divided as follows: 16 cylinders for the concrete compressive strength test (8 samples for each mix), 16 cylinders for the splitting tensile strength (8 specimens for each mix) and 16 beams to test the influences of magnetized water on the flexural strength of concrete (8 specimens for each mixture). Specimens were exposed to temperatures of (25 °C, 200 °C, 400 °C and 600 °C). The experimental results showed that magnetic water highly affected the mechanical properties of concrete. Specimens cast and curried out with magnetic water show higher compressive strength, splitting tensile strength and flexural strength compared to normal water specimens at all temperatures. The relative strength range between the two types of water used was 110–123% for compressive strength and 110–133% for splitting strength. For the center point loading test, the relative flexural strength range was 118–140%. The use of magnetic water in mixing concrete contribute to a more complete hydration process.Design/methodology/approachExperimental study was carried out on two concrete mixes to investigate the effect of magnetic water. Mix#1 used normal water as the mixing water, and Mix#2 used magnetic water instead of normal water. After 28 days, all the samples were taken out of the tank and left to dry for seven days, then they were divided into different groups. Each group was exposed to a different temperature where it was placed in a large oven for two hours. Three different tests were carried out on the samples, these tests were concrete compressive strength, flexural strength and splitting tensile strength.FindingsExposure of concrete to high temperatures had a significant influence on concrete mechanical properties. Specimens prepared using magnetic water showed higher compressive strength at all temperature levels. The use of magnetic water in casting and curing concrete can increase the compressive strength by 23%. Specimens prepared using magnetic water show higher splitting tensile strength at all temperatures up to 33%. The use of magnetic water in casting and curing can strengthen and increase concrete resistance to high temperatures, a significant enhancement in flexural strength at all temperatures was found with a value up to 40%.Originality/valuePrevious research proved the advantages of using magnetic water for improving the mechanical properties of concrete under normal conditions. The potential of using magnetic water in the concrete industry in the future requires conducting extensive research to study the behavior of magnetized concrete under severe conditions to which concrete structures may be subjected to. These days, there are attempts to obtain stronger concrete with high resistance to harsh environmental conditions without adding new costly ingredients to its main mixture. No research has been carried out to investigate the effect of magnetic water on the mechanical properties of concrete exposed to elevated temperature. The main objective of this study is to evaluate the effect of using magnetic water on the mechanical properties of hardened concrete subjected to elevated temperature.

The Effect of Yarn Linear Density on Mechanical Properties of Plain Woven Kenaf Reinforced Unsaturated Polyester Composite

2013 ◽  
Vol 465-466 ◽  
pp. 962-966 ◽  
Author(s):  
Mohd Pahmi bin Saiman ◽  
Mohd Saidin Bin Wahab ◽  
Mat Uzir Wahit
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Linear Density ◽  
Unsaturated Polyester ◽  
Composite Panel ◽  
Composite Yarn ◽  
Polyester Composite ◽  
The Impact ◽  
Woven Kenaf

To produce a good quality of dry fabric for reinforced material in a natural-based polymer composite, yarn linear density should be in consideration. A woven kenaf dry fabric with three different linear densities of 276tex, 413.4tex and 759tex were produced. The fabrics with different linear densities were been optimize with the assistance of WiseTex software. The optimized dry fabrics were infused with unsaturated polyester to produce composite panel using vacuum infusion process. The composites properties were tested on the tensile strength, flexural strength and the impact strength. The result shows that the mechanical properties of the composite increased when the yarn linear densities increased.

scholarly journals The Effect of Borax Solution as Preservative to the Mechanical Properties of Bamboo

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
M.A.P Handana ◽  
◽  
Besman Surbakti ◽  
Rahmi Karolina ◽  
◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Bending Strength ◽  
Environmentally Friendly ◽  
Preservative Solution ◽  
Borax Solution ◽  
Preservative Solutions

The use of borax solution as a preservative in wood and bamboo materials is well known in the community. A borax solution is an environmentally friendly liquid that can dissolve in water, so it is suitable to be used as a preservative within cold or hot soaking techniques. The ability of borax to resist insects and fungus attacks on bamboo has been proven, but the effect of the solution on the strength of bamboo must also be investigated. This study conducts to investigate the effects of borax and its additives as preservative solutions to the mechanical properties of bamboos. The bamboos preservations were conducted by cold conditions of immersion, while the mechanical properties were performed to understand the effects of preservatives. The result of this study indicated that 30% to 50% borax in the preservative solution is sufficient to provide significant increase in strength for compressive strength, tensile strength, and bending strength of bamboo specimen. From this study, the use of borax solution in preserving the bamboos materials improved the quality of bamboos based on its mechanical properties.

scholarly journals Chemical Quality of Tap Water Versus Bottled Water: Evaluation of Some Heavy Metals and Elements Content of Drinking Water in Dakahlia Governorate - Egypt

2008 ◽  
Vol 16 (2) ◽  
pp. 1-15
Author(s):  
Mona El-Harouny ◽  
Sahar El-Dakroory ◽  
Sohayla Attalla ◽  
Nermin Hasan ◽  
Ragia Hegazy
Keyword(s):  
Heavy Metals ◽  
Drinking Water ◽  
Tap Water ◽  
Bottled Water ◽  
Chemical Quality

scholarly journals The Impact of Slicing Softwares on the Mechanical Properties of 3D Printed Parts

2020 ◽  
Vol 9 (2) ◽  
pp. 487-494
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
3D Printer ◽  
Stl File ◽  
3D Printed ◽  
Intersection Curves ◽  
The Impact

“Slicing tool” or “Slicing Software” computes the intersection curves of models and slicing planes. They improve the quality of the model being printed when given in the form of STL file. Upon analyzing a specimen that has been printed using two different slicing tools, there was a drastic variation on account of the mechanical properties of the specimen. The ultimate tensile strength and the surface roughness of the material vary from one tool to another. This paper reports an investigation and analysis of the variation in the ultimate tensile strength and the surface roughness of the specimen, given that the 3D printer and the model being printed is the same, with a variation of usage of slicing software. This analysis includes ReplicatorG, Flashprint as the two different slicing tools that are used for slicing of the model. The variation in the ultimate tensile strength and the surface roughness are measured and represented statistically through graphs. An appropriate decisive conclusion was drawn on the basis of the observations and analysis of the experiment on relevance to the behavior and mechanical properties of the specimen.

Properties of Spanish Broom Fiber Reinforced Concrete

2021 ◽  
Vol 322 ◽  
pp. 72-77
Author(s):  
Sandra Juradin ◽  
Ivica Boko ◽  
Ivanka Netinger Grubeša ◽  
Dražan Jozić ◽  
Silvija Mrakovčić ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Building Materials ◽  
Tap Water ◽  
Reinforce Concrete ◽  
Climatic Conditions ◽  
Fiber Reinforced Concrete ◽  
Hardened Concrete ◽  
Fiber Reinforced ◽  
Plant Fibers

Building materials based on renewable resources such as plant fibers are increasingly needed, especially if the plant is local and easily accessible. One such plant is the Spanish broom, a typical shrub of the Mediterranean region. In this work, Spanish broom fibers were used for the first time to reinforce concrete. Four mixtures were made: a reference mixture and three mixtures reinforced with 3 cm long fibers, in the amount of 0.5% of the total volume. Cement CEM I 42.5R, crushed limestone aggregate (D = 16 mm), and tap water were used for all the mixtures and in equal quantities. Four mortar mixtures were also made: standard mortar and 3 fiber-reinforced mortars. The mortar is reinforced with fibers of the same length and quantity as the concrete. The fibers were obtained by maceration of Spanish broom in solutions of 8%, 10%, and 15% NaOH. The quality and mechanical properties of the cellulose fibers depend on the geographical and climatic conditions and the fiber extraction procedures so the aim of this study was to evaluate the influence of different chemical pre-treatments of the fibers on the mechanical properties of the concrete. The properties of the fresh mix were determined using the flow method. Hardened concrete was tested for compressive and flexural strength and dynamic modulus of elasticity. Compressive and flexural strengths were determined on cement mortars. The results obtained on concrete were compared with those obtained on the mortar. It was concluded that the quality of composite materials is more influenced by the quality of the placement than by fiber treatment.

Effect of Atmosphere and Holding Time on the Quality of Surface and Mechanical Properties of the Cold-Rolling Plate of Fe-42% Ni (4J42)

2012 ◽  
Vol 560-561 ◽  
pp. 655-660
Author(s):  
Li Juan Li ◽  
Li Hua Liu ◽  
Jing Wang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Yield Strength ◽  
Cold Rolling ◽  
Surface Quality ◽  
Annealing Process ◽  
Holding Time ◽  
Annealing Condition ◽  
Nitrogen Ratio

In order to guide atmosphere annealing process in industry, the effect of atmosphere and holding times on the surface quality and mechanical properties of the cold-rolling plate of Fe-42% Ni (4J42) was studied. It is found that in the laboratory, surface qualities of all the samples annealed at different annealing condition are all good enough. When the ratio of hydrogen and nitrogen is below 70%:30%, at different holding time, with increasing of H2 proportion, 4J42’s tensile strength and yield strength all increases, and the hardness declines. And except H2:N2=70%:30, when holding time is less than or equal to 1.2min, at different ratio of hydrogen and nitrogen, holding time will influence 4J42’s mechanical properties little. So combine requires in industry with the experiment results, it can be concluded that for 4J42 alloy, annealing at atmosphere of hydrogen nitrogen ratio is less than 70%:30% for about 1.2min is appropriate to atmosphere annealing process in industry.

Bacterial quality of drinking water sources and antimicrobial resistance profile of Enterobacteriaceae in Bahir Dar city, Ethiopia

2014 ◽  
Vol 4 (3) ◽  
pp. 384-390 ◽  
Author(s):  
Bayeh Abera ◽  
Mulugeta Kibret ◽  
Goraw Goshu ◽  
Mulat Yimer
Keyword(s):  
Drinking Water ◽  
Antimicrobial Resistance ◽  
Water Samples ◽  
Multiple Drug Resistance ◽  
Tap Water ◽  
World Health ◽  
Most Probable Number ◽  
Bahir Dar ◽  
Probable Number

A cross-sectional study was conducted to determine the bacterial quality and antimicrobial susceptibility profiles of Enterobacteriaceae from drinking water in Bahir Dar city. A total of 140 water samples were collected in the wet and dry periods from springs (n = 4), reservoirs (n = 10) and private tap water at households (n = 126). Bacteriological analysis of water was conducted using multiple tube method. Overall, 21.4%, 18.6% and 17.8% of drinking water samples had total coliforms (TC), faecal coliforms (FC) and Escherichia coli, respectively. All spring water samples and 29.2% of private tap water had the highest TC load (18 most probable number/100 mL, 95% CI: 100). For FC, 81.4% of the drinking water supplies tested complied with both World Health Organization and Ethiopian Standards. High levels of resistance (98–100%) were observed for ampicillin by Enterobacteriaceae and Pseudomonas aeruginosa. All P. aeruginosa isolates and 20 (66.7%) of E. coli revealed multiple drug resistance. Enterobacteriaceae and P. aeruginosa isolates exhibited high levels of antimicrobial resistance. The bacterial quality of drinking water in Bahir Dar city was poor. Microbial surveillance and monitoring with periodic assessment on physical integrity of the water pipelines need to be undertaken.

Disinfection of bacteria in water systems by using electrolytically generated copper:silver and reduced levels of free chlorine

1990 ◽  
Vol 36 (2) ◽  
pp. 109-116 ◽  
Author(s):  
Moyasar T. Yahya ◽  
Lee K. Landeen ◽  
Maria C. Messina ◽  
Susan M. Kutz ◽  
Richard Schulze ◽  
...  
Keyword(s):  
Drinking Water ◽  
Key Words ◽  
Tap Water ◽  
Total Coliform ◽  
Water Systems ◽  
Free Chlorine ◽  
Drinking Water Standards ◽  
Indoor And Outdoor

As an alternative disinfectant to chlorination, electrolytically generated copper:silver (400 and 40 μg/L copper and silver, respectively) with and without free chlorine (0.3 mg/L) was evaluated over a period of 4 weeks in indoor and outdoor water systems (100 L tap water with natural body flora and urine). Numbers of total coliform, pseudomonas, and staphylococci were all less than drinking water standards in systems treated with copper:silver and free chlorine and systems treated with free chlorine alone (1.0 mg/L). No significant differences (p ≤ 0.05) in bacterial numbers were observed between systems with copper:silver and free chlorine and those with free chlorine alone. Overall, free-chlorine treatments (0.3 or 1.0 mg/L) showed significantly lower heterotrophic plate numbers than those without free chlorine. When challenged with a natural Staphylococcus sp. isolate, water with copper:silver and free chlorine had a 2.4 log10 reduction in bacterial numbers within 2 min, while free chlorine alone or copper:silver alone showed 1.5 and 0.03 log10 reductions, respectively. Addition of copper:silver to water systems may allow the concentration of free chlorine to be reduced while still providing comparable sanitary quality of the water. Key words: disinfection, water, copper, silver, chlorine.

Sign in / Sign up

Export Citation Format

Share Document