Optimal stationary control of diesel engines using periodic control

2016 ◽  
Vol 231 (4) ◽  
pp. 457-475 ◽  
Author(s):  
Martin Sivertsson ◽  
Lars Eriksson
Keyword(s):  
Optimal Control ◽  
Optimal Solution ◽  
Mean Value ◽  
Operating Point ◽  
Improve Performance ◽  
Periodic Control ◽  
The Mean ◽  
Operating Points ◽  
Stationary Control ◽  
Optimal Stationary Control

Measurements and optimal control are used to study whether the fuel economy of a diesel engine can be improved through periodic control of the wastegate, illustrating how modern optimal control tools can be used to identify non-trivial solutions that can improve performance. The measurements show that the pumping torque of the engine is changed when the wastegate is controlled in a periodic manner versus stationary even if the mean position is the same. If this decreases the fuel consumption or not is seen to be frequency and operating point dependent. The measurements indicate that the phenomenon occurs in the time scales capturable by mean value engine models (MVEM). The operating points are further analyzed using a MVEM and optimal control. It is shown that whether the optimal solution exhibits periodic oscillations or not is operating point dependent, but is not due to the instantaneous nature of the controls. Even if an actuator model is added the oscillations persist for reasonable time constants, the frequency of the oscillations is however affected. Further it is shown that the periodic control can be predicted by optimal periodic control theory and that the frequency of the control affects the resulting efficiency.

scholarly journals Robust multi-fidelity design of a micro re-entry unmanned space vehicle

2011 ◽  
Vol 225 (11) ◽  
pp. 1195-1209 ◽  
Author(s):  
E Minisci ◽  
M Vasile ◽  
H Liqiang
Keyword(s):  
Neural Networks ◽  
Optimal Control ◽  
Thermal Protection ◽  
Space Vehicle ◽  
Mean Value ◽  
Maximum Heat ◽  
Direct Transcription ◽  
Maximum Heat Flux ◽  
The Neural Networks ◽  
The Mean

This article addresses the preliminary robust design of a small-scale re-entry unmanned space vehicle by means of a hybrid optimization technique. The approach, developed in this article, closely couples an evolutionary multi-objective algorithm with a direct transcription method for optimal control problems. The evolutionary part handles the shape parameters of the vehicle and the uncertain objective functions, while the direct transcription method generates an optimal control profile for the re-entry trajectory. Uncertainties on the aerodynamic forces and characteristics of the thermal protection material are incorporated into the vehicle model, and a Monte-Carlo sampling procedure is used to compute relevant statistical characteristics of the maximum heat flux and internal temperature. Then, the hybrid algorithm searches for geometries that minimize the mean value of the maximum heat flux, the mean value of the maximum internal temperature, and the weighted sum of their variance: the evolutionary part handles the shape parameters of the vehicle and the uncertain functions, while the direct transcription method generates the optimal control profile for the re-entry trajectory of each individual of the population. During the optimization process, artificial neural networks are utilized to approximate the aerodynamic forces required by the optimal control solver. The artificial neural networks are trained and updated by means of a multi-fidelity approach: initially a low-fidelity analytical model, fitted on a waverider type of vehicle, is used to train the neural networks, and through the evolution a mix of analytical and computational fluid dynamic, high-fidelity computations are used to update it. The data obtained by the high-fidelity model progressively become the main source of updates for the neural networks till, near the end of the optimization process, the influence of the data obtained by the analytical model is practically nullified. On the basis of preliminary results, the adopted technique is able to predict achievable performance of the small spacecraft and the requirements in terms of thermal protection materials.

Unscented MPSP for Optimal Control of a Class of Uncertain Nonlinear Dynamic Systems

2019 ◽  
Vol 141 (6) ◽  
Author(s):  
S. Mathavaraj ◽  
Radhakant Padhi
Keyword(s):  
Optimal Control ◽  
Initial Conditions ◽  
Mean Value ◽  
Control Synthesis ◽  
Benchmark Problems ◽  
Computationally Efficient ◽  
Efficient Manner ◽  
The Mean ◽  
Low Dimensional ◽  
Time Invariant

A new computationally efficient nonlinear optimal control synthesis technique, named as unscented model predictive static programming (U-MPSP), is presented in this paper that is applicable to a class of problems with uncertainties in time-invariant system parameters and/or initial conditions. This new technique is a fusion of two recent ideas, namely MPSP and Riemann–Stieltjes optimal control problems. First, unscented transform is utilized to construct a low-dimensional finite number of deterministic problems. The philosophy of MPSP is utilized next so that the solution can be obtained in a computational efficient manner. The control solution not only ensures that the terminal constraint is met accurately with respect to the mean value, but it also ensures that the associated covariance matrix (i.e., the error ball) is minimized. Significance of U-MPSP has been demonstrated by successfully solving two benchmark problems, namely the Zermelo problem and inverted pendulum problem, which contain parametric and initial condition uncertainties.

Long-period modulated superstructures in Pd-12.5 at.%Ce and Pd-15 at.%Ce alloys

1990 ◽  
Vol 48 (4) ◽  
pp. 164-165
Author(s):  
Noriyuki Kuwano ◽  
Masaru Itakura ◽  
Kensuke Oki
Keyword(s):  
Electron Microscopy ◽  
Mean Value ◽  
Heavy Elements ◽  
Arc Furnace ◽  
X Ray ◽  
Long Period ◽  
Ultra High Purity ◽  
Heat Treated ◽  
Atomic Scattering ◽  
The Mean

Pd-Ce alloys exhibit various anomalies in physical properties due to mixed valences of Ce, and the anomalies are thought to be strongly related with the crystal structures. Since Pd and Ce are both heavy elements, relative magnitudes of (fcc-fpd) are so small compared with <f> that superlattice reflections, even if any, sometimes cannot be detected in conventional x-ray powder patterns, where fee and fpd are atomic scattering factors of Ce and Pd, and <f> the mean value in the crystal. However, superlattices in Pd-Ce alloys can be analyzed by electron microscopy, thanks to the high detectability of electron diffraction. In this work, we investigated modulated superstructures in alloys with 12.5 and 15.0 at.%Ce.Ingots of Pd-Ce alloys were prepared in an arc furnace under atmosphere of ultra high purity argon. The disc specimens cut out from the ingots were heat-treated in vacuum and electrothinned to electron transparency by a jet method.

Partition Coefficient Ratios and Tumour Perfusion Studied with 85mKr and 133Xe

1987 ◽  
Vol 26 (06) ◽  
pp. 253-257
Author(s):  
M. Mäntylä ◽  
J. Perkkiö ◽  
J. Heikkonen
Keyword(s):  
Partition Coefficient ◽  
Partition Coefficients ◽  
Regional Blood Flow ◽  
Blood Perfusion ◽  
Compartmental Analysis ◽  
Malignant Tumour ◽  
Mean Value ◽  
Perfusion Rate ◽  
Biological Variables ◽  
The Mean

The relative partition coefficients of krypton and xenon, and the regional blood flow in 27 superficial malignant tumour nodules in 22 patients with diagnosed tumours were measured using the 85mKr- and 133Xe-clearance method. In order to minimize the effect of biological variables on the measurements the radionuclides were injected simultaneously into the tumour. The distribution of the radiotracers was assumed to be in equilibrium at the beginning of the experiment. The blood perfusion was calculated by fitting a two-exponential function to the measuring points. The mean value of the perfusion rate calculated from the xenon results was 13 ± 10 ml/(100 g-min) [range 3 to 38 ml/(100 g-min)] and from the krypton results 19 ± 11 ml/(100 g-min) [range 5 to 45 ml/(100 g-min)]. These values were obtained, if the partition coefficients are equal to one. The equations obtained by using compartmental analysis were used for the calculation of the relative partition coefficient of krypton and xenon. The partition coefficient of krypton was found to be slightly smaller than that of xenon, which may be due to its smaller molecular weight.

Detection of Soluble Fibrin Monomer Complexes in Blood by Means of Protamine Sulphate Test

1968 ◽  
Vol 20 (01/02) ◽  
pp. 044-049 ◽  
Author(s):  
B Lipiński ◽  
K Worowski
Keyword(s):  
Human Subjects ◽  
Coronary Thrombosis ◽  
Mean Value ◽  
Healthy Human ◽  
Protamine Sulphate ◽  
Soluble Fibrin ◽  
Fibrin Monomer ◽  
Dog Plasma ◽  
The Mean ◽  
Precipitable Protein

SummaryIn the present paper described is a simple test for detecting soluble fibrin monomer complexes (SFMC) in blood. The test consists in mixing 1% protamine sulphate with diluted oxalated plasma or serum and reading the optical density at 6190 Å. In experiments with dog plasma, enriched with soluble fibrin complexes, it was shown that OD read in PS test is proportional to the amount of fibrin recovered from the precipitate. It was found that SFMC level in plasma increases in rabbits infused intravenously with thrombin and decreases after injection of plasmin with streptokinase. In both cases PS precipitable protein in serum is elevated indicating enhanced fibrinolysis. In healthy human subjects the mean value of OD readings in plasma and sera were found to be 0.30 and 0.11, while in patients with coronary thrombosis they are 0.64 and 0.05 respectively. The origin of SFMC in circulation under physiological and pathological conditions is discussed.

Detection of Circulating Tissue Factor and Factor VII in a Normal Population

1996 ◽  
Vol 75 (05) ◽  
pp. 772-777 ◽  
Author(s):  
Sybille Albrecht ◽  
Matthias Kotzsch ◽  
Gabriele Siegert ◽  
Thomas Luther ◽  
Heinz Großmann ◽  
...  
Keyword(s):  
Tissue Factor ◽  
Normal Population ◽  
Mean Value ◽  
Factor Vii ◽  
Significant Difference ◽  
Age Dependent ◽  
The Mean ◽  
Highly Correlated ◽  
And Gender

SummaryThe plasma tissue factor (TF) concentration was correlated to factor VII concentration (FVIIag) and factor VII activity (FVIIc) in 498 healthy volunteers ranging in age from 17 to 64 years. Immunoassays using monoclonal antibodies (mAbs) were developed for the determination of TF and FVIIag in plasma. The mAbs and the test systems were characterized. The mean value of the TF concentration was 172 ± 135 pg/ml. TF showed no age- and gender-related differences. For the total population, FVIIc, determined by a clotting test, was 110 ± 15% and the factor VIlag was 0.77 ± 0.19 μg/ml. FVII activity was significantly increased with age, whereas the concentration demonstrated no correlation to age in this population. FVII concentration is highly correlated with the activity as measured by clotting assay using rabbit thromboplastin. The ratio between FVIIc and FVIIag was not age-dependent, but demonstrated a significant difference between men and women. Between TF and FVII we could not detect a correlation.

Determination of Plasminogen in Clots and Thrombi

1966 ◽  
Vol 16 (01/02) ◽  
pp. 038-050 ◽  
Author(s):  
Ulla Hedner ◽  
Inga Marie Nilsson ◽  
B Robertson
Keyword(s):  
Mean Value ◽  
Main Mechanism ◽  
Clot Lysis ◽  
Post Mortem ◽  
Digestion Time ◽  
Normal Volunteers ◽  
Casein Solution ◽  
The Mean

SummaryThe plasminogen content was determined by a casein method in plasma and serum from 20 normal volunteers. The mean plasminogen content was found to be 10.1 ACU (the arbitrary caseinolytic unit defined in such a way that using a 3% casein solution and a digestion time of 20 min. at 37°C, 10 ACU gave an extinction of 0.300). No difference between serum and plasma regarding the plasminogen content was found.Plasminogen was determined in drained and drained plus washed clots prepared from 2 ml plasma. The highest values found in the drained clots were 0.9 ACU/clot and 0.2 ACU/clot in the drained plus washed clots.Plasminogen was also determined in drained and drained plus washed clots prepared from plasma with added purified plasminogen. The plasminogen was recovered in the washing fluid. According to these tests, then, purified added plasminogen is washed out of the clots.The plasminogen content of 20 thrombi obtained post mortem was also determined. The mean value was found to be 0.7 ACU/cm thrombus. Judging from our results, the “intrinsic clot lysis theory” is not the main mechanism of clot dissolution.

Perbedaan Pengetahuan Siswa Tentang Penyakit Hepatitis A Sebelum Dan Sesudah Penyuluhan Di MTsN 02 Bondowoso Tahun 2015

2017 ◽  
Vol 4 (2) ◽  
pp. 14
Author(s):  
Putri Megasari
Keyword(s):  
Hepatitis A ◽  
Hepatitis Virus ◽  
Sampling Technique ◽  
Mean Value ◽  
Test Design ◽  
The World ◽  
Before And After ◽  
Post Test ◽  
The Mean ◽  
Paired T Test

Hepatitis has become a health problem in the world. The hepatitis virus infected many people. According to the teacher of MTsN 02 Bondowoso more than 20 students have hepatitis A viral infection. The purpose of this research was to know the differences of students' knowledge about hepatitis A before and after counseling in MTsN 02 Bondowoso 2015. This study used pre-experimental (pre-post test design). This study used stratified random sampling technique, 127 students from 270 sample involved this research,and 143 students was excluded. We used questionnaires to collect data. The results showed that the mean value of the students 'knowledge about hepatitis A before counseling in MTsN 02 Bondowoso 2015 was 83.96 with the lowest value of 37.5 and the highest value was 100. The mean value of the students' knowledge about hepatitis A after counseling in MTsN 02 Bondowoso 2015 was 93.21 with the lowest value waf 62.5 and the highest value was 100. Paired t test showed that t (-9.07) > t table (1.98), the null hypothesis (H0) was rejected. There was a difference between students' knowledge about hepatitis A before and after counseling in MTsN 02 Bondowoso 2015. This study showed that routine counseling by healthcare provider was important to prevent hepatitis A infection.; Keywords: counseling, knowledge of students, hepatitis

SERUM THYROTROPHIN AND THE RESPONSE TO THYROTROPHIN RELEASING HORMONE IN SYMPTOMLESS AUTOIMMUNE THYROIDITIS AND IN BORDERLINE AND OVERT HYPOTHYROIDISM

1974 ◽  
Vol 75 (2) ◽  
pp. 274-285 ◽  
Author(s):  
A. Gordin ◽  
P. Saarinen ◽  
R. Pelkonen ◽  
B.-A. Lamberg
Keyword(s):  
Autoimmune Thyroiditis ◽  
Elevated Serum ◽  
Mean Value ◽  
Primary Hypothyroidism ◽  
Overt Hypothyroidism ◽  
Thyrotrophin Releasing Hormone ◽  
Releasing Hormone ◽  
The Mean ◽  
The Individual ◽  
Serum Tsh

ABSTRACT Serum thyrotrophin (TSH) was determined by the double-antibody radioimmunoassay in 58 patients with primary hypothyroidism and was found to be elevated in all but 2 patients, one of whom had overt and one clinically borderline hypothyroidism. Six (29%) out of 21 subjects with symptomless autoimmune thyroiditis (SAT) had an elevated serum TSH level. There was little correlation between the severity of the disease and the serum TSH values in individual cases. However, the mean serum TSH value in overt hypothyroidism (93.4 μU/ml) was significantly higher than the mean value both in clinically borderline hypothyroidism (34.4 μU/ml) and in SAT (8.8 μU/ml). The response to the thyrotrophin-releasing hormone (TRH) was increased in all 39 patients with overt or borderline hypothyroidism and in 9 (43 %) of the 21 subjects with SAT. The individual TRH response in these two groups showed a marked overlap, but the mean response was significantly higher in overt (149.5 μU/ml) or clinically borderline hypothyroidism (99.9 μU/ml) than in SAT (35.3 μU/ml). Thus a normal basal TSH level in connection with a normal response to TRH excludes primary hypothyroidism, but nevertheless not all patients with elevated TSH values or increased responses to TRH are clinically hypothyroid.

GAMBARAN BEBAN KERJA MENTAL PADA DOSEN FAKULTAS X UNIVERSITAS X

2019 ◽  
Vol 2 (3) ◽  
Author(s):  
Kartiani Dewi ◽  
Suryani S ◽  
Ahmad Yamin
Keyword(s):  
Community Service ◽  
Mental Workload ◽  
Sampling Technique ◽  
Mean Value ◽  
Descriptive Statistics ◽  
Large Contribution ◽  
Mean Dimension ◽  
The Mean ◽  
Quantitative Descriptive ◽  
University Lecturers

Lecturers are responsible for implementing the three main responsibilities in university (Tridharma Perguruan Tinggi) with 12 credits to 16 credits each semester. However, many lecturers feel that the workload is very excessive. The purpose of this study was to describe the mental workload of lecturers at the Faculty of X Padjadjaran University. The method of this research was quantitative descriptive by using a total sampling technique involving 43 lecturers. Data collection used NASA-TLX instruments. Data were analysed using descriptive statistics. The results of the study showed that overall the mental workload of the Faculty of X Padjadjaran University lecturers was included in the high category both in education and teaching assignments (74.4%), research assignments (76.7%), and community service assignments (74.4%). ) Effort dimensions have the highest mean value that is equal to 51.8, while the dimensions that have the lowest mean are Perfomance dimension, namely 9.4, where the greater the mean dimension shows the large contribution in the mental workload felt by the lecturer. The conclusions, this study show that most lecturers have a high mental workload. It is suggested that the lecturers need to have balance numbers of tasks according to their abilities, balance the time working with recreation, and meet the needs of rest. The results of this study need to be followed up by examining methods or efforts that can reduce the lecturers' mental workload.

Sign in / Sign up

Export Citation Format

Share Document