Prediction of shear strain induced by blasting waves in surface structures based on coupled frequency, velocity, and displacement effects

2020 ◽  
pp. 107754632093525
Author(s):  
Reza Nateghi ◽  
Kamran Goshtasbi ◽  
Hamid Reza Nejati
Keyword(s):  
Response Spectrum ◽  
Simple Procedure ◽  
Structural Response ◽  
Ground Vibration ◽  
Horizontal Displacement ◽  
Dominant Frequency ◽  
Rock Formations ◽  
Frequency Peak ◽  
Geological Conditions ◽  
Relative Stress

Blasting ground vibration is an undesirable side effect of using explosives to fragment rocks. There is not any universally accepted standard to determine limitations of blast vibrations; however, velocity is the most commonly used method to measure ground vibrations. Because the structural response is highly frequency dependent, the frequency content is an essential characteristic of blast-induced shock waves along with the velocity. The magnitude of blast-induced displacement or velocity and their relative stress and strain are directly related to the quantity of charge, distance from blasting point, and geological conditions. These effects were not considered in the response spectrum theory of structures. This article tries to propose a new procedure to predict the shear displacement and relative strain for optimization of blasting patterns before the explosion. It can be accomplished by representing the effects of both velocity and frequency on the horizontal displacement of the structures based on measurements undertaken by the authors in two different rock formations. In this study, collected data were analyzed statistically to determine the coupled effects of dominant frequency, peak particle velocity, and peak particle displacement to propose a simple procedure for predicting the range of blast-induced displacement and related strain in structures.

The Optimized Dynamic Behavior of Short Embankment Based on Frequency Performance

2015 ◽  
Vol 6 (2) ◽  
pp. 1-11
Author(s):  
Behrouz Gordan ◽  
Azlan Adnan
Keyword(s):  
Response Spectrum ◽  
New Technology ◽  
Free Vibration Analysis ◽  
Horizontal Displacement ◽  
Relative Displacement ◽  
Dominant Frequency ◽  
Modulus Ratio ◽  
Depth Ratio ◽  
Vertical Displacements ◽  
The Impact

Due to the performance of embankment under the earthquake, relative displacement at both edges of the crest is very important for body cracks. It can be computed by dynamic analysis. In this way, response spectrum analysis and Rayleigh damping coefficient are dependent factors to dominant frequency. Based on the new technology using advanced programs to compute frequency, free vibration analysis as the basic technique and considering of different vibration modes is accessible. This research tried to evaluate the distribution of dominant frequencies for short embankment (H=30 meter) using Finite-Element Method (ANSYS 13). To evaluate of the frequency, elasticity modulus ratio and foundation depth ratio were the main objectives. Both were defined by the ratio between the embankment and foundation. As a result, maximum and minimum vertical displacements were located on both slopes, and maximum horizontal displacement was exposed at the crest. The dominant frequency increased as the modulus ratio decreased. In addition, dominant frequency decreased as the depth ratio increased. The impact of the modulus ratio to enhance frequency was greater than the depth ratio. In terms of contributing engineering, the amplitude of the dominant frequency (Hz) was finally optimized for modulus ratios (0.25-1.00) and depth ratios (0.1-1.00). For critical situation, modulus ratio was more than three, and the depth ratio was half of the unit. More research about medium embankment is recommended.

Experimental modeling of adjacent parallel shield tunnels subjected to train-induced vibration loads

2021 ◽  
pp. 095440972098626
Author(s):  
Junchen Zhang ◽  
Qixiang Yan ◽  
Kai Yang ◽  
Minghui Sun
Keyword(s):  
Experimental Studies ◽  
Bimodal Distribution ◽  
Dominant Frequency ◽  
Experimental Modeling ◽  
Load Curve ◽  
Hilbert Huang Transform ◽  
Frequency Peak ◽  
Train Speed ◽  
Vibration Loads ◽  
Train Induced Vibration

Previous studies have performed numerical simulations of adjacent parallel shield tunnels under train-induced vibration loads. However, few experimental studies have been performed for the interaction mechanisms. In this study, experimental modeling is conduced to explore the interaction of adjacent parallel shield tunnels subjected to different train-induced vibration loads. A new Hilbert-Huang transform (HHT) is applied to obtain the instantaneous responses of tunnels. The results show that the acceleration of the tunnel follows the trend of the train load curve. The peak accelerations of the tunnels experience a unimodal distribution along the train speed, while the dominant frequencies of the tunnels follow a bimodal distribution. The interaction between the adjacent parallel tunnels is significant. The transform of the vibration loads to the adjacent tunnel is through the soil below the tunnel. The farther away from the train load is, the greater the train speed corresponding to the dominant frequency peak.

Application of Earthquake Resistance Analysis Technique in the Design of Constructional Engineering

2013 ◽  
Vol 756-759 ◽  
pp. 4482-4486
Author(s):  
Chun Gan ◽  
Xue Song Luo
Keyword(s):  
Response Spectrum ◽  
Structural Response ◽  
Time History ◽  
Economic Losses ◽  
Element Analysis ◽  
Architectural Engineering ◽  
Analysis Technique ◽  
History Analysis ◽  
Earthquake Resistant ◽  
History Of

In recent years, frequent earthquakes have caused great casualties and economic losses in China. And in the earthquake, damage of buildings and the collapse is the main reason causing casualties. Therefore, in the design of constructional engineering, a seismicity of architectural structure is the pressing task at issue. Through time history analysis method, this paper analyzes the time history of building structural response and then it predicts the peak response of mode by response spectrum analysis. Based on this, this paper constructs a numerical simulation model for the architecture by using finite element analysis software SATWE. At the same time, this paper also calculates the structure seismic so as to determine the design of each function structure in architectural engineering design and then provides reference for the realization of earthquake-resistant building.

scholarly journals Seismic risk assessment of architectural heritages in Gyeongju considering local site effects

2013 ◽  
Vol 13 (2) ◽  
pp. 251-262 ◽  
Author(s):  
H.-J. Park ◽  
D.-S. Kim ◽  
D.-M. Kim
Keyword(s):  
Risk Assessment ◽  
Cultural Heritage ◽  
Seismic Risk ◽  
Site Response ◽  
Response Spectrum ◽  
Primary Data ◽  
Seismic Risk Assessment ◽  
Heritage Sites ◽  
Geological Conditions ◽  
Site Period

Abstract. A seismic risk assessment is conducted for cultural heritage sites in Gyeongju, the capital of Korea's ancient Silla Kingdom. Gyeongju, home to UNESCO World Heritage sites, contains remarkable artifacts of Korean Buddhist art. An extensive geotechnical survey including a series of in situ tests is presented, providing pertinent soil profiles for site response analyses on thirty cultural heritage sites. After the shear wave velocity profiles and dynamic material properties were obtained, site response analyses were carried out at each historical site and the amplification characteristics, site period, and response spectrum of the site were determined for the earthquake levels of 2400 yr and 1000 yr return periods based on the Korean seismic hazard map. Response spectrum and corresponding site coefficients obtained from site response analyses considering geologic conditions differ significantly from the current Korean seismic code. This study confirms the importance of site-specific ground response analyses considering local geological conditions. Results are given in the form of the spatial distribution of bedrock depth, site period, and site amplification coefficients, which are particularly valuable in the context of a seismic vulnerability study. This study presents the potential amplification of hazard maps and provides primary data on the seismic risk assessment of each cultural heritage.

scholarly journals A Multi-Objective Ground Motion Selection Approach Matching the Acceleration and Displacement Response Spectra

2018 ◽  
Vol 10 (12) ◽  
pp. 4659 ◽  
Author(s):  
Yabin Chen ◽  
Longjun Xu ◽  
Xingji Zhu ◽  
Hao Liu
Keyword(s):  
Ground Motion ◽  
Response Spectrum ◽  
Structural Response ◽  
Response Spectra ◽  
Computationally Efficient ◽  
Ground Motion Selection ◽  
Displacement Response ◽  
Rc Frames ◽  
Selection Approach ◽  
Displacement Response Spectra

For seismic resilience-based design (RBD), a selection of recorded time histories for dynamic structural analysis is usually required. In order to make individual structures and communities regain their target functions as promptly as possible, uncertainty of the structural response estimates is in great need of reduction. The ground motion (GM) selection based on a single target response spectrum, such as acceleration or displacement response spectrum, would bias structural response estimates leading significant uncertainty, even though response spectrum variance is taken into account. In addition, resilience of an individual structure is not governed by its own performance, but depends severely on the performance of other systems in the same community. Thus, evaluation of resilience of a community using records matching target spectrum at whole periods would be reasonable because the fundamental periods of systems in the community may be varied. This paper presents a GM selection approach based on a probabilistic framework to find an optimal set of records to match multiple target spectra, including acceleration and displacement response spectra. Two major steps are included in that framework. Generation of multiple sub-spectra from target displacement response spectrum for selecting sets of GMs was proposed as the first step. Likewise, the process as genetic algorithm (GA), evolvement of individuals previously generated, is the second step, rather than using crossover and mutation techniques. A novel technique improving the match between acceleration response spectra of samples and targets is proposed as the second evolvement step. It is proved computationally efficient for the proposed algorithm by comparing with two developed GM selection algorithms. Finally, the proposed algorithm is applied to select GM records according to seismic codes for analysis of four archetype reinforced concrete (RC) frames aiming to evaluate the influence of GM selection considering two design response spectra on structural responses. The implications of design response spectra especially the displacement response spectrum and GM selection algorithm are summarized.

On the Combined Effect of Mean Flow and Acoustic Excitation on Structural Response and Radiation

1997 ◽  
Vol 119 (3) ◽  
pp. 448-456 ◽  
Author(s):  
A. Frendi ◽  
L. Maestrello
Keyword(s):  
Mach Number ◽  
Response Spectrum ◽  
Structural Response ◽  
Harmonic Excitation ◽  
Two Dimensions ◽  
Physical Problem ◽  
Acoustic Excitation ◽  
Mean Flow ◽  
Power Spectral ◽  
The Mean

Numerical experiments in two dimensions are carried out in order to investigate the response of a typical aircraft structure to a mean flow and an acoustic excitation. Two physical problems are considered; one in which the acoustic excitation is applied on one side of the flexible structure and the mean flow is on the other side while in the second problem both the mean flow and acoustic excitation are on the same side. Subsonic and supersonic mean flows are considered together with a random and harmonic acoustic excitation. In the first physical problem and using a random acoustic excitation, the results show that at low excitation levels the response is unaffected by the mean flow Mach number. However, at high excitation levels the structural response is significantly reduced by increasing the Mach number. In particular, both the shift in the frequency response spectrum and the broadening of the peaks are reduced. In the second physical problem, the results show that the response spectrum is dominated by the lower modes (1 and 3) for the subsonic mean flow case and by the higher modes (5 and 7) in the supersonic case. When a harmonic excitation is used, it is found that in the subsonic case the power spectral density of the structural response shows a subharmonic (f/4) while in the supersonic case no subharmonic is obtained.

scholarly journals The effect of seismic base isolation on structural response of a 12-story hotel building in Padang, Indonesia

2020 ◽  
Vol 156 ◽  
pp. 05026
Author(s):  
Fauzan ◽  
Afdhalul Ihsan ◽  
Mutia Putri Monika ◽  
Zev Al Jauhari
Keyword(s):  
Base Isolation ◽  
Response Spectrum ◽  
Soft Soil ◽  
Structural Response ◽  
Time History ◽  
Seismic Zone ◽  
Isolation System ◽  
Rubber Bearing ◽  
Seismic Base Isolation ◽  
The City

The amount of potential investment in Padang City, Indonesia since 2017 attracted many investors to contribute to the city. One of the investments is a 12-story hotel that will be constructed in By Pass Street of the city. The hotel is located in a high seismic zone area, so the seismic base isolation has been proposed to be used in the hotel building. The main aim of using a seismic base isolation device is to reduce the inertia forces introduced in the structure due to earthquakes by shifting the fundamental period of the structure out of dangerous resonance range and concentration of the deformation demand at the isolation system. An analytical study on the Reinforced Concrete (RC) hotel building with and without rubber bearing (RB) base isolation is carried out using the response spectrum and time history analysis methods. The results show that internal forces and inter-story drift of the building with high damping rubber bearing (HDRB) are lower than that of the fixed base with a remarkable margin. From this study, it is recommended to use the HDRB base isolation for medium and high rise buildings with soft soil in Padang City, Indonesia.

scholarly journals Analysis of Ground Deformation Caused by Subway Tunnel Excavation in Kunming

2021 ◽  
Vol 236 ◽  
pp. 03029
Author(s):  
Ping Wei ◽  
Liuchuang Wei
Keyword(s):  
Ground Deformation ◽  
Horizontal Displacement ◽  
Subway Tunnel ◽  
Buried Pipelines ◽  
Tunnel Excavation ◽  
Protection Measures ◽  
Geological Conditions ◽  
Soil Stress ◽  
Foundation Deformation ◽  
At Home

Research at home and abroad shows that subway excavation often causes soil stress loss, resulting in settlement deformation and horizontal displacement of stratum. Therefore, combined with the special engineering geological conditions in Kunming area, the foundation deformation caused by subway excavation is studied, so as to provide an important foundation for proposing the protection measures of surrounding buildings and buried pipelines and promoting the construction of subway.

Research on Mining Technological Parameters of 7# Thin Coal Seam in Liuquan Mine

2012 ◽  
Vol 629 ◽  
pp. 937-942
Author(s):  
Dong Sheng Zhang ◽  
Xu Feng Wang ◽  
Yang Zhang ◽  
Jin Liang Wang
Keyword(s):  
Coal Seam ◽  
Distinct Element ◽  
Horizontal Displacement ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Technological Parameters ◽  
Thin Coal Seam ◽  
Geological Conditions ◽  
Universal Distinct Element Code ◽  
Distinct Element Code

Aimed at the specific geological conditions of 7# thin coal seam in Liuquan Mine, this paper used the methods of numerical calculation and theoretical analysis to determine the reasonable technological parameters of high-grade conventional mining face. The numerical simulation software of UDEC (Universal Distinct Element Code) was used to contrast and analyse the characteristics of surrounding rock stress distribution and overlying rock horizontal displacement under the condition of different length of coalface, then it was indicated that the surrounding rock deformation was less when length of coalface was 110 m which was advantageous for roof control; according to the conditions of roof and floor, the roof support strength was being calculated systematically to determine the row space of props being 700×1200 mm; the main equipments of coalface was assorted, and reasonable work manner in coalface and gob processing measure was put forward, which provided guidance for efficient mining in thin coal seam.

Structural Response and Pounding of Andalas University Hospital Building Using New Indonesian Seismic Code SNI 1726-2012

2016 ◽  
Vol 845 ◽  
pp. 274-282
Author(s):  
Fauzan ◽  
Febrin Anas Ismail ◽  
Zev Al Jauhari
Keyword(s):  
Response Spectrum ◽  
Structural Response ◽  
Time History ◽  
Analysis Time ◽  
University Hospital ◽  
Seismic Code ◽  
History Analysis ◽  
Internal Forces ◽  
Hospital Building ◽  
Analytical Result

Keywords: Earthquake, Internal Forces, Displacement, Response Spectrum Analysis, Time History Analysis, PoundingAbstract. Teaching Hospital is an educational facilitiy for students in the Faculty of Medicine and also as a health services for the general public. The hospital building must be built in accordance with earthquake-safe building standards, so that buildings are not damaged in an earthquake. Andalas University Hospital was built at Padang in 2014 which was designed using Indonesian Seismic Code SNI 03-1726-2002 with quakes zone 6. Since 2012, a new Seismic Code, SNI 1726-2012, was issued and all the buildings should be designed by using the new code. Therefore, the authors are interested in analyzing the structural response of the hospital building by using new seismic code SNI 1726-2012. The results, then, were compared with the responses of the structure which calculated by using SNI 03-1726-2002.The results of analysis show that the structural responses in the internal forces and displacement by using SNI 1726-2012 was higher than those using SNI 03-1726-2002. In this study, an analysis of potential Pounding was also conducted by using dynamic analysis Time History method. The analytical result shows that there is no pounding between adjacent buildings at Andalas University Hospital Buildings.

Sign in / Sign up

Export Citation Format

Share Document