scholarly journals A novel strain-based finite element family for mesh-independent analysis of the tensile failure of reinforced concrete bars

2021 ◽  
pp. 136943322110585
Author(s):  
Anita Ogrin ◽  
Igor Planinc ◽  
Sebastjan Bratina
Keyword(s):  
Reinforced Concrete ◽  
Tensile Tests ◽  
Concrete Cover ◽  
Constitutive Law ◽  
Tensile Failure ◽  
Integration Scheme ◽  
Reinforcing Bar ◽  
Numerical Integration Scheme ◽  
Discrete Crack ◽  
Longitudinal Slip

The paper presents a novel family of strain-based beam finite elements (FE) for analysis of tensile failure of a reinforced concrete bar (RC bar), with results of the analysis being independent of the applied FE mesh. The composite bar consists of a continuous longitudinal ductile reinforcing bar(s) surrounded by brittle concrete cover, which are considered separately in the model. Longitudinal slip at the contact between the concrete cover and reinforcing bars is allowed, while their relative displacements perpendicular to the axis of the RC bar are prevented. Cracks in concrete cover occur when tensile stress in concrete exceeds its tensile strength. Propagation of partially connected crack, that is, softening of the material at the crack, is described through constitutive law in form of nonlinear relationship between stresses in concrete at the crack and the width of the crack. Each separate crack is considered discretely as a discontinuity in geometry of the element. In the analysis of cracking of concrete, it is commonly assumed that the discrete crack can occur at the nodes of FE only. However, this assumption leads to dependence of the analysis results on the employed FE mesh. The presented family of FE enables occurrence of the crack anywhere along the FE. In order to achieve this, the discrete crack is excluded from equations of FE and additional boundary conditions are introduced at the discontinuity. This approach ensures that the location of the cracks, their number and their propagation are independent of the applied FE mesh. Advantages of the novel family of FE are thoroughly presented in a parametric study which investigates influence of number of FE as well as influence of degrees of interpolation and integration on the cracking of RC bar under tensile loading. Experimental results of tensile tests on the analysed bar are available in literature. It can be concluded that the results obtained with the minimal possible number of novel FE and sufficiently high degree of numerical integration scheme, applied for solving integrals in equations of FE, are considerably more accurate than the results of previous analyses with model of discrete crack at the nodes of FE only.

Analisa Pola Kegagalan Balok Beton Menggunakan GFRP Bar Tanpa Selimut Beton

2020 ◽  
Vol 24 (1) ◽  
pp. 11-16
Author(s):  
Saddam - Husein ◽  
Rudy Djamaluddin ◽  
Rita Irmawaty ◽  
Kusnadi Kusnadi
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Concrete Cover ◽  
Steel Reinforcement ◽  
Fiber Reinforced Polymer ◽  
Mode Analysis ◽  
Flexural Capacity ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Gfrp Bar

SADDAM HUSEIN. Analisa Pola Kegagalan Balok Beton Menggunakan GFRP Bar Tanpa Selimut Beton (dibimbing oleh Rudi Djamaluddin dan Rita Irmawaty) Struktur beton bertulang yang menggunakan tulangan baja pada daerah korosif, menjadi rawan terhadap kerusakan atau penurunan kekuatannya akibat korosi.Korosi pada tulangan baja merupakan salah satu faktor penyebab menurunnya kekuatan struktur beton bertulang. Salah satu material yang dikembangkan mengatasi korosi adalah penggunaan material tulangan GFRP (Glass Fiber Reinforced Polymer). Penelitian ini bertujuan untuk menganalisa kapasitas lentur dan pola kegagalan balok beton tanpa selimut dengan menggunakan material tulangan GFRP bar.   Desain penelitian merupakan eksperimental laboratorium dengan rekapitulasi sebanyak 6 sampel yang terdiri dari 2 Balok beton menggunakan tulangan baja dengan selimut beton, 2 balok beton menggunakan tulangan GFRP bar dengan selimut beton, 2 balok beton menggunakan GFRP bar tanpa selimut beton. Metode pengujian dilakukan dengan dengan pengujian lentur statik monotonik dan Analisis data menggunakan uji kondisi retak awal dan kondisi ultimit.   Hasil penelitian ini menunjukkan bahwa kapasitas lentur pada balok dengan tulangan GFRP bar lebih besar dibandingkan dengan balok tulangan baja dan mampu meningkatkan kapasitas lentur balok dalam menahan beban sebesar 39.76 %, pola kegagalan beton yang terjadi pada balok tulangan baja mengalami kegagalan lentur tekan ditandai dengan retakan yang terjadi pada sisi tertekan dan membentuk retakan tegak dengan sumbu netral beton yang tertekan, sedangkan pada balok beton tulangan GFRP tanpa selimut mengalami kegagalan keruntuhan tekan geser dengan kondisi tulangan berdeformasi (bi-linear) dengan retak miring dan secara tiba-tiba menjalar menuju sumbu netral beton yang tertekan sehingga terjadilah keruntuhan secara tiba-tiba.     SADDAM HUSEIN.Failure mode analysis of concrete Beams Using GFRP rebar Without concrete cover (supervised by Rudi Djamaluddin and Rita Irmawaty)   Reinforced concrete that uses rebar steel in corrosive areas, are prone to damage or decreased strength due to corrosion. Corrosion in the steel reinforcement is one of the factors that decreasing strength of reinforced concrete. One of the materials developed to overcome corrosion is the use of GFRP (Glass Fiber Reinforced Polymer) reinforcement material. This study aims to analyze the flexural capacity and failure mode of concrete beams without concrete cover using material GFRP bar as reinforcement.   The research design was an experimental laboratory with a recapitulation of 6 samples consisting of 2 beams using steel reinforcement with concrete cover.2 concrete beams using reinforcement GFRP bar with concrete cover, 2 beams using GFRP bars without concrete cover. The  research method uses the monotonic static flexure and analyzing the data using the initial crack condition and ultimate conditions test.   The results of the research indicate the flexural capacity of the beams with GFRP bar reinforcement is higher than steel reinforcement beams and can increase 39.76% of the flexural capacity of the beams in holding loads , the failure mode analysis occurs in steel reinforcing beam experiences compressive failure. Failure was characterized  by cracks that occur on the depressing side and form an upright crack with the neutral axis of the compressed concrete, whereas in GFRP reinforced concrete beams without concrete cover, failure of shear compression with conditions of deformed reinforcement (bi-linear) with sloping cracks and suddenly spread towards the neutral axis of the compressed concrete so that there was a sudden collapse.

scholarly journals Mechanical Optimization of Concrete with Recycled PET Fibres Based on a Statistical-Experimental Study

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 240
Author(s):  
Alejandro Meza ◽  
Pablo Pujadas ◽  
Laura Montserrat Meza ◽  
Francesc Pardo-Bosch ◽  
Rubén D. López-Carreño
Keyword(s):  
Reinforced Concrete ◽  
Aspect Ratio ◽  
Mechanical Performance ◽  
Tensile Tests ◽  
Superior Performance ◽  
Fibre Reinforced Concrete ◽  
Marine Fauna ◽  
Recycled Pet ◽  
Pet Bottles ◽  
Fibre Aspect Ratio

Discarded polyethylene terephthalate (PET) bottles have damaged our ecosystem. Problems of marine fauna conservation and land fertility have been related to the disposal of these materials. Recycled fibre is an opportunity to reduce the levels of waste in the world and increase the mechanical performance of the concrete. PET as concrete reinforcement has demonstrated ductility and post-cracking strength. However, its performance could be optimized. This study considers a statistical-experimental analysis to evaluate recycled PET fibre reinforced concrete with various fibre dose and aspect ratio. 120 samples were experimented under workability, compressive, flexural, and splitting tensile tests. The results pointed out that the fibre dose has more influence on the responses than its fibre aspect ratio, with statistical relation on the tensional toughness, equivalent flexural strength ratio, volumetric weight, and the number of fibres. Moreover, the fibre aspect ratio has a statistical impact on the tensional toughness. In general, the data indicates that the optimal recycled PET fibre reinforced concrete generates a superior performance than control samples, with an improvement similar to those reinforced with virgin fibres.

scholarly journals Influence of Patching on the Shear Failure of Reinforced Concrete Beam without Stirrup

2021 ◽  
Vol 6 (7) ◽  
pp. 97
Author(s):  
Stefanus Adi Kristiawan ◽  
Halwan Alfisa Saifullah ◽  
Agus Supriyadi
Keyword(s):  
Reinforced Concrete ◽  
Shear Failure ◽  
Numerical Study ◽  
Unsaturated Polyester ◽  
Reinforced Concrete Beam ◽  
Concrete Cover ◽  
Shear Capacity ◽  
Rc Beam ◽  
Shear Span ◽  
Shear Cracking

Deteriorated concrete cover, e.g., spalling or delamination, especially when it occurs at the web of a reinforced concrete (RC) beam within the shear span, can reduce the shear capacity of the beam. Patching of this deteriorated area may be the best option to recover the shear capacity of the beam affected. For this purpose, unsaturated polyester resin mortar (UPR mortar) has been formulated. This research aims to investigate the efficacy of UPR mortar in limiting the shear cracking and so restoring the shear capacity of the deteriorated RC beam. The investigation is carried out by an experimental and numerical study. Two types of beams with a size of 150 × 250 × 1000 mm were prepared. The first type of beams was assigned as a normal beam. The other was a beam with a cut off in the non-stirrup shear span, which was eventually patched with UPR mortar. Two reinforcement ratios were assigned for each type of beams. The results show that UPR mortar is effective to hamper the propagation of diagonal cracks leading to increase the shear failure load by 15–20% compared to the reference (normal) beam. The increase of shear strength with the use of UPR mortar is consistently confirmed at various reinforcement ratios.

Passive corrosion control and active corrosion prevention of the reinforced concrete structures by electrochemical chloride removal and inhibitors

2013 ◽  
Vol 61 (1) ◽  
pp. 32-37 ◽  
Author(s):  
Guofu Qiao ◽  
Yi Hong ◽  
Tiejun Liu ◽  
Jinping Ou
Keyword(s):  
Reinforced Concrete ◽  
Concrete Structures ◽  
Concrete Cover ◽  
Reinforced Concrete Structures ◽  
Reinforcing Steel ◽  
Corrosion Control ◽  
Cell Potential ◽  
Content Type ◽  
Chloride Removal ◽  
Active Corrosion

Purpose – The aim of this paper was to investigate the passive corrosion control and active corrosion protective effect of the reinforced concrete structures by electrochemical chloride removal (ECR) method and inhibitors approach, respectively. Design/methodology/approach – The concentration of aggressive chloride ion distributed from the reinforcing steel to the surface of the concrete cover was analyzed during the ECR processes. Besides, the half-cell potential, the concrete resistance R c , the polarization resistance R p and the capacitance of double layer C dl of the steel/concrete system were used to characterize the electrochemical performance of the concrete prisms. Findings – The effectiveness of ECR could be enhanced by increasing the amplitude of potential or prolonging the time. Inhibitor SBT-ZX(I) could successfully prevent the corrosion development of the reinforcing steel in concrete. Originality/value – The research provides the scientific basis for the practical application of ECR and inhibitors in the field.

The Application Research of Reinforced Concrete Multi-Ribbed Hollow Composite Slab in the Road Slab Culvert

2011 ◽  
Vol 368-373 ◽  
pp. 307-311
Author(s):  
Dong Qi Zhao ◽  
Yi Jun Tang ◽  
Hui Li ◽  
Gui Feng Song ◽  
Feng Ling Guan
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Concrete Cover ◽  
Reinforced Concrete Beams ◽  
Application Research ◽  
Composite Slab ◽  
The Road ◽  
High Integrity ◽  
Cover Design ◽  
Bottom Slab

Reinforced concrete cover in the road culvert cover design, in order to facilitate the construction, usually using precast reinforced concrete solid slab, but the overall cost is not low. This article researched a reinforced concrete multi-ribbed hollow composite slab, it based on the theory of reinforced concrete multi-ribbed slab structures, using a precast reinforced concrete ribbed slab as the bottom die, then poured reinforced concrete beams and panels rib ,and them constituted a whole stack of reinforced concrete ribbed hollow slab. This kind of cover, compared with the precast reinforced concrete solid cover, is not only good mechanical properties, high integrity, but also saving concrete, steel, and bottom slab appeared smooth and fine, lower construction cost.

scholarly journals Inclusion of CFRP-Epoxy Composite for End Anchorage in NSM-Epoxy Strengthened Beams

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Md. Akter Hosen ◽  
Mohd Zamin Jumaat ◽  
A. B. M. Saiful Islam
Keyword(s):  
Reinforced Concrete ◽  
Failure Modes ◽  
Concrete Cover ◽  
Structural Members ◽  
Premature Failure ◽  
Near Surface ◽  
Steel Bars ◽  
Near Surface Mounted ◽  
Separation Failure ◽  
Concrete Cover Separation

Nowadays, the use of near surface mounted (NSM) technique strengthening reinforced concrete (RC) structural members is going very popular. The failure modes of NSM strengthened reinforced concrete (RC) beams have been shown to be largely due to premature failure such as concrete cover separation. In this study, CFRP U-wrap end anchorage with CFRP fabrics was used to eliminate the concrete cover separation failure. A total of eight RC rectangular beam specimens of 125 mm width, 250 mm depth, and 2300 mm length were tested. One specimen was kept unstrengthened as a reference; three specimens were strengthened with NSM steel bars and the remaining four specimens were strengthened with NSM steel bars together with the U-wrap end anchorage. The experimental results showed that wrapped strengthened beams had higher flexural strength and superior ductility performance. The results also show that these beams had less deflection, strain, crack width, and spacing.

Physical and Chemical Deterioration of Reinforced Concrete Reefs in Tongyeong Reefs Coastal Waters, Korea

2008 ◽  
Vol 42 (3) ◽  
pp. 110-118 ◽  
Author(s):  
H. S. Kim ◽  
C. G. Kim ◽  
W. B. Na ◽  
J. Woo ◽  
J. K. Kim
Keyword(s):  
Reinforced Concrete ◽  
Service Life ◽  
Dissolved Oxygen ◽  
Extreme Event ◽  
Chemical Properties ◽  
Chloride Concentration ◽  
Concrete Cover ◽  
Marine Habitat ◽  
Seawater Salinity ◽  
Physical And Chemical

As part of a marine habitat enhancement project, the physical and chemical deterioration of reinforced concrete reefs that were fully immersed in Tongyeong waters of Korea was investigated. For the investigation, marine environmental factors such as seawater, salinity, pH, dissolved oxygen, sea-bottom materials, and water depth of the targeted sites were surveyed from 1997 to 2001. Then, four reinforced concrete reefs from four different sites were recovered and tested by using various destructive and nondestructive methods. Based on the observations and test results, it was seen that the reinforced concrete reefs have sound physical and chemical properties, except for chloride concentration and its associated factors. However, because of the lack of dissolved oxygen in the targeted seawaters and its continuous supply, it is concluded that the originally designed service life will be achieved, and in fact the concrete reefs will have an even longer service life than expected. By considering an extreme event such as impact loading under installation and construction, a new minimum concrete cover depth of 40 mm is introduced into practice.

scholarly journals Influence of steel–concrete bond damage on the dynamic stiffness of cracked reinforced concrete beams

2018 ◽  
Vol 21 (13) ◽  
pp. 1977-1989 ◽  
Author(s):  
Tengfei Xu ◽  
Jiantao Huang ◽  
Arnaud Castel ◽  
Renda Zhao ◽  
Cheng Yang
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beam ◽  
Natural Frequencies ◽  
Concrete Beams ◽  
Dynamic Stiffness ◽  
Reinforced Concrete Beam ◽  
Reinforced Concrete Beams ◽  
Reinforcing Bar ◽  
Sustained Loading ◽  
Inertia Model

In this article, experiments focusing at the influence of steel–concrete bond damage on the dynamic stiffness of cracked reinforced concrete beams are reported. In these experiments, the bond between concrete and reinforcing bar was damaged using appreciate flexural loads. The static stiffness of cracked reinforced concrete beam was assessed using the measured load–deflection response under cycles of loading and unloading, and the dynamic stiffness was analyzed using the measured natural frequencies with and without sustained loading. Average moment of inertia model (Castel et al. model) for cracked reinforced beams by taking into account the respective effect of bending cracks (primary cracks) and the steel–concrete bond damage (interfacial microcracks) was adopted to calculate the static load–deflection response and the natural frequencies of the tested beams. The experimental results and the comparison between measured and calculated natural frequencies show that localized steel–concrete bond damage does not influence remarkably the dynamic stiffness and the natural frequencies both with and without sustained loading applied. Castel et al. model can be used to calculate the dynamic stiffness of cracked reinforced concrete beam by neglecting the effect of interfacial microcracks.

scholarly journals Tensile Behaviour of FRCM Composites for Strengthening of Masonry Structures—An Experimental Investigation

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3626
Author(s):  
Łukasz Hojdys ◽  
Piotr Krajewski
Keyword(s):  
Tensile Stress ◽  
Strain Curve ◽  
Tensile Tests ◽  
Tensile Failure ◽  
Tensile Behaviour ◽  
Masonry Structures ◽  
Stress Strain ◽  
Flexural Tensile Strength ◽  
Cracking Pattern ◽  
Direct Tensile

This paper presents the results of direct tensile tests performed on six different FRCM (fabric reinforced cementitious matrix) strengthening systems used for masonry structures. The emphasis was placed on the determination of the mechanical parameters of each tested system and a comparison of their tensile behaviour in terms of first crack stress, ultimate stress, ultimate strain, cracking pattern, failure mode and idealised tensile stress-strain curve. In addition to the basic mechanical tensile parameters, accidental load eccentricities, matrix tensile strengths, and matrix modules of elasticity were estimated. The results of the tests showed that the tensile behaviour of FRCM composites strongly depends on the parameters of the constituent materials (matrix and fabric). In the tests, tensile failure of reinforcement and fibre slippage within the matrix were observed. The presented research showed that the accidental eccentricities did not substantially affect the obtained results and that the more slender the specimen used, the more consistent the obtained results. The analysis based on a rule of mixtures showed that the direct tensile to flexural tensile strength ratio of the matrixes used in the test was 0.2 to 0.4. Finally, the tensile stress–strain relationship for the tested FRCMs was idealised by a bi- or tri-linear curve.

Sign in / Sign up

Export Citation Format

Share Document