scholarly journals A motor and a brake: two leg extensor muscles acting at the same joint manage energy differently in a running insect

2002 ◽  
Vol 205 (3) ◽  
pp. 379-389 ◽  
Author(s):  
A. N. Ahn ◽  
R. J. Full
Keyword(s):  
Muscle Power ◽  
Mechanical Energy ◽  
Muscle Group ◽  
Shortening Velocity ◽  
Extrinsic Factors ◽  
Leg Muscles ◽  
Video Motion Analysis ◽  
The Individual ◽  
Leg Extensors

SUMMARYThe individual muscles of a multiple muscle group at a given joint are often assumed to function synergistically to share the load during locomotion. We examined two leg extensors of a running cockroach to test the hypothesis that leg muscles within an anatomical muscle group necessarily manage (i.e. produce, store, transmit or absorb) energy similarly during running. Using electromyographic and video motion-analysis techniques, we determined that muscles 177c and 179 are both active during the first half of the stance period during muscle shortening. Using the in vivo strain and stimulation patterns determined during running, we measured muscle power output. Although both muscles were stimulated during the first half of shortening, muscle 177c generated mechanical energy (28 W kg–1) like a motor, while muscle 179 absorbed energy (–19 W kg–1) like a brake. Both muscles exhibited nearly identical intrinsic characteristics including similar twitch kinetics and force–velocity relationships. Differences in the extrinsic factors of activation and relative shortening velocity caused the muscles to operate very differently during running. Presumed redundancy in a multiple muscle group may, therefore, represent diversity in muscle function. Discovering how muscles manage energy during behavior requires the measurement of a large number of dynamically interacting variables.

Influence of Pedaling Rate on Muscle Mechanical Energy in Low Power Recumbent Pedaling Using Forward Dynamic Simulations

2007 ◽  
Author(s):  
Nils A. Hakansson ◽  
Maury L. Hull
Keyword(s):  
Low Power ◽  
Dynamic Model ◽  
Inverse Dynamics ◽  
Muscle Power ◽  
Mechanical Energy ◽  
Triceps Surae ◽  
Knee Extensors ◽  
Individual Muscle ◽  
The Individual ◽  
Pedaling Rate

An understanding of the muscle power contributions to the crank and limb segments in recumbent pedaling would be useful in the development of rehabilitative pedaling exercises. The objectives of this work were to (i) develop a forward dynamic model to simulate low-power pedaling in the recumbent position, (ii) use the model to quantify the power contributions of the muscles to driving the crank and limb segments, and (iii) determine whether there were differences in the muscle power contributions required to simulate recumbent pedaling at three different pedaling rates. A forward dynamic model was used to determine the individual muscle excitation amplitude and timing to drive simulations that best replicated experimental kinematics and kinetics of recumbent pedaling. The segment kinematics, pedal reaction forces, and electromyograms (EMG) of 10 muscles of the right leg were recorded from 16 subjects as they pedaled a recumbent ergometer at 40, 50, and 60 rpm and a constant 50 W workrate. Intersegmental joint moments were computed using inverse dynamics and the muscle excitation onset and offset timing were determined from the EMG data. All quantities were averaged across ten cycles for each subject and averaged across subjects. The model-generated kinematic and kinetic quantities tracked almost always within 1 SD of the experimental data for all three pedaling rates. The uniarticular hip and knee extensors generated 65 percent of the total mechanical work in recumbent pedaling. The triceps surae muscles transferred power from the limb segments to the crank and the bi-articular muscles that crossed the hip and knee delivered power to the crank during the leg transitions between flexion and extension. The functions of the individual muscles did not change with pedaling rate, but the mechanical energy generated by the knee extensors and hip flexors decreased as pedaling rate increased. By varying the pedaling rate, it is possible to manipulate the individual muscle power contributions to the crank and limb segments in recumbent pedaling and thereby design rehabilitative pedaling exercises to meet specific objectives.

scholarly journals Estimation of the force–velocity properties of individual muscles from measurement of the combined plantarflexor properties

2020 ◽  
Vol 223 (18) ◽  
pp. jeb219980
Author(s):  
Mehrdad Javidi ◽  
Craig P. McGowan ◽  
David C. Lin
Keyword(s):  
Muscle Length ◽  
Muscle Architecture ◽  
Muscle Group ◽  
Cross Sectional ◽  
Fiber Properties ◽  
Group Modeling ◽  
Force Velocity ◽  
The Individual

ABSTRACTThe force–velocity (F–V) properties of isolated muscles or muscle fibers have been well studied in humans and other animals. However, determining properties of individual muscles in vivo remains a challenge because muscles usually function within a synergistic group. Modeling has been used to estimate the properties of an individual muscle from the experimental measurement of the muscle group properties. While this approach can be valuable, the models and the associated predictions are difficult to validate. In this study, we measured the in situ F–V properties of the maximally activated kangaroo rat plantarflexor group and used two different assumptions and associated models to estimate the properties of the individual plantarflexors. The first model (Mdl1) assumed that the percent contributions of individual muscles to group force and power were based upon the muscles' cross-sectional area and were constant across the different isotonic loads applied to the muscle group. The second model (Mdl2) assumed that the F–V properties of the fibers within each muscle were identical, but because of differences in muscle architecture, the muscles' contributions to the group properties changed with isotonic load. We compared the two model predictions with independent estimates of the muscles' contributions based upon sonomicrometry measurements of muscle length. We found that predictions from Mdl2 were not significantly different from sonomicrometry-based estimates while those from Mdl1 were significantly different. The results of this study show that incorporating appropriate fiber properties and muscle architecture is necessary to parse the individual muscles' contributions to the group F–V properties.

scholarly journals Aquatic and terrestrial takeoffs require different hindlimb kinematics and muscle function in mallard ducks

2020 ◽  
Vol 223 (16) ◽  
pp. jeb223743
Author(s):  
Kari R. Taylor-Burt ◽  
Andrew A. Biewener
Keyword(s):  
Muscle Function ◽  
Muscle Power ◽  
Contractile Function ◽  
Shortening Velocity ◽  
Muscle Properties ◽  
Hindlimb Muscle ◽  
Wide Range ◽  
Hindlimb Kinematics ◽  
Metatarsophalangeal Joints

ABSTRACTMallard ducks are capable of performing a wide range of behaviors including nearly vertical takeoffs from both terrestrial and aquatic habitats. The hindlimb plays a key role during takeoffs from both media. However, because force generation differs in water versus on land, hindlimb kinematics and muscle function are likely modulated between these environments. Specifically, we hypothesize that hindlimb joint motion and muscle shortening are faster during aquatic takeoffs, but greater hindlimb muscle forces are generated during terrestrial takeoffs. In this study, we examined the hindlimb kinematics and in vivo contractile function of the lateral gastrocnemius (LG), a major ankle extensor and knee flexor, during takeoffs from water versus land in mallard ducks. In contrast to our hypothesis, we observed no change in ankle angular velocity between media. However, the hip and metatarsophalangeal joints underwent large excursions during terrestrial takeoffs but exhibited almost no motion during aquatic takeoffs. The knee extended during terrestrial takeoffs but flexed during aquatic takeoffs. Correspondingly, LG fascicle shortening strain, shortening velocity and pennation angle change were greater during aquatic takeoffs than during terrestrial takeoffs because of the differences in knee motion. Nevertheless, we observed no significant differences in LG stress or work, but did see an increase in muscle power output during aquatic takeoffs. Because differences in the physical properties of aquatic and terrestrial media require differing hindlimb kinematics and muscle function, animals such as mallards may be challenged to tune their muscle properties for movement across differing environments.

scholarly journals Phosphate and acidosis act synergistically to depress peak power in rat muscle fibers

2014 ◽  
Vol 307 (10) ◽  
pp. C939-C950 ◽  
Author(s):  
Cassandra R. Nelson ◽  
Edward P. Debold ◽  
Robert H. Fitts
Keyword(s):  
Peak Power ◽  
Isometric Force ◽  
Muscle Fibers ◽  
Low Ph ◽  
Collective Effects ◽  
Fiber Types ◽  
Shortening Velocity ◽  
The Individual ◽  
Maximal Isometric Force

Skeletal muscle fatigue is characterized by the buildup of H+ and inorganic phosphate (Pi), metabolites that are thought to cause fatigue by inhibiting muscle force, velocity, and power. While the individual effects of elevated H+ or Pi have been well characterized, the effects of simultaneously elevating the ions, as occurs during fatigue in vivo, are still poorly understood. To address this, we exposed slow and fast rat skinned muscle fibers to fatiguing levels of H+ (pH 6.2) and Pi (30 mM) and determined the effects on contractile properties. At 30°C, elevated Pi and low pH depressed maximal shortening velocity ( Vmax) by 15% (4.23 to 3.58 fl/s) in slow and 31% (6.24 vs. 4.55 fl/s) in fast fibers, values similar to depressions from low pH alone. Maximal isometric force dropped by 36% in slow (148 to 94 kN/m2) and 46% in fast fibers (148 to 80 kN/m2), declines substantially larger than what either ion exerted individually. The strong effect on force combined with the significant effect on velocity caused peak power to decline by over 60% in both fiber types. Force-stiffness ratios significantly decreased with pH 6.2 + 30 mM Pi in both fiber types, suggesting these ions reduced force by decreasing the force per bridge and/or increasing the number of low-force bridges. The data indicate the collective effects of elevating H+ and Pi on maximal isometric force and peak power are stronger than what either ion exerts individually and suggest the ions act synergistically to reduce muscle function during fatigue.

scholarly journals Mechanical efficiency and efficiency of storage and release of series elastic energy in skeletal muscle during stretch-shorten cycles.

1996 ◽  
Vol 199 (9) ◽  
pp. 1983-1997
Author(s):  
G J Ettema
Keyword(s):  
Elastic Energy ◽  
Muscle Power ◽  
Mechanical Energy ◽  
Mechanical Efficiency ◽  
Contractile Element ◽  
Cycle Frequency ◽  
External Work ◽  
Work Done ◽  
Series Elastic

The mechanical energy exchanges between components of a muscle-tendon complex, i.e. the contractile element (CE) and the series elastic element (SEE), and the environment during stretch-shorten cycles were examined. The efficiency of the storage and release of series elastic energy (SEE efficiency) and the overall mechanical efficiency of the rat gastrocnemius muscle (N = 5) were determined for a range of stretch-shorten contractions. SEE efficiency was defined as elastic energy released to the environment divided by external work done upon the muscle-tendon complex plus internal work exchange from the CE to the SEE. Mechanical efficiency is external work done by the muscle-tendon complex divided by the external work done upon the muscle-tendon complex plus work done by the CE. All stretch-shorten cycles were performed with a movement amplitude of 3mm (6.7% strain). Cycle frequency, duty factor and the onset of stimulation were altered for the different cycles. SEE efficiency varied from 0.02 to 0.85, mechanical efficiency from 0.43 t 0.92. SEE efficiency depended on the timing of stimulation and net muscle power in different ways. Mechanical efficiency was much more closely correlated with net power. The timing of muscle relaxation was crucial for the effective release of elastic energy. Simulated in vivo contractions indicated that during rat locomotion the gastrocnemius may have a role other than that of effectively storing elastic energy and generating work. Computer simulations showed that the amount of series elastic compliance can affect the internal energetics of a muscle contraction strongly without changing the muscle force generation dramatically.

scholarly journals Changes in electromyographic activity, mechanical power, and relaxation rates following inspiratory ribcage muscle fatigue

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Antonio Sarmento ◽  
Guilherme Fregonezi ◽  
Maria Lira ◽  
Layana Marques ◽  
Francesca Pennati ◽  
...  
Keyword(s):  
Muscle Fatigue ◽  
Low Frequency ◽  
Mechanical Power ◽  
Electromyographic Activity ◽  
Median Frequency ◽  
Relaxation Rates ◽  
Shortening Velocity ◽  
Inspiratory Muscles ◽  
Underlying Mechanisms

AbstractMuscle fatigue is a complex phenomenon enclosing various mechanisms. Despite technological advances, these mechanisms are still not fully understood in vivo. Here, simultaneous measurements of pressure, volume, and ribcage inspiratory muscle activity were performed non-invasively during fatigue (inspiratory threshold valve set at 70% of maximal inspiratory pressure) and recovery to verify if inspiratory ribcage muscle fatigue (1) leads to slowing of contraction and relaxation properties of ribcage muscles and (2) alters median frequency and high-to-low frequency ratio (H/L). During the fatigue protocol, sternocleidomastoid showed the fastest decrease in median frequency and slowest decrease in H/L. Fatigue was also characterized by a reduction in the relative power of the high-frequency and increase of the low-frequency. During recovery, changes in mechanical power were due to changes in shortening velocity with long-lasting reduction in pressure generation, and slowing of relaxation [i.e., tau (τ), half-relaxation time (½RT), and maximum relaxation rate (MRR)] was observed with no significant changes in contractile properties. Recovery of median frequency was faster than H/L, and relaxation rates correlated with shortening velocity and mechanical power of inspiratory ribcage muscles; however, with different time courses. Time constant of the inspiratory ribcage muscles during fatigue and recovery is not uniform (i.e., different inspiratory muscles may have different underlying mechanisms of fatigue), and MRR, ½RT, and τ are not only useful predictors of inspiratory ribcage muscle recovery but may also share common underlying mechanisms with shortening velocity.

scholarly journals Preclinical Testing of Radiopharmaceuticals for the Detection and Characterization of Osteomyelitis: Experiences from a Porcine Model

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4221
Author(s):  
Aage Kristian Olsen Alstrup ◽  
Svend Borup Jensen ◽  
Ole Lerberg Nielsen ◽  
Lars Jødal ◽  
Pia Afzelius
Keyword(s):  
Animal Model ◽  
Animal Models ◽  
Porcine Model ◽  
Animal Experiments ◽  
Radioactive Tracers ◽  
The Individual ◽  
Selection Of

The development of new and better radioactive tracers capable of detecting and characterizing osteomyelitis is an ongoing process, mainly because available tracers lack selectivity towards osteomyelitis. An integrated part of developing new tracers is the performance of in vivo tests using appropriate animal models. The available animal models for osteomyelitis are also far from ideal. Therefore, developing improved animal osteomyelitis models is as important as developing new radioactive tracers. We recently published a review on radioactive tracers. In this review, we only present and discuss osteomyelitis models. Three ethical aspects (3R) are essential when exposing experimental animals to infections. Thus, we should perform experiments in vitro rather than in vivo (Replacement), use as few animals as possible (Reduction), and impose as little pain on the animal as possible (Refinement). The gain for humans should by far exceed the disadvantages for the individual experimental animal. To this end, the translational value of animal experiments is crucial. We therefore need a robust and well-characterized animal model to evaluate new osteomyelitis tracers to be sure that unpredicted variation in the animal model does not lead to a misinterpretation of the tracer behavior. In this review, we focus on how the development of radioactive tracers relies heavily on the selection of a reliable animal model, and we base the discussions on our own experience with a porcine model.

scholarly journals Animal Models in the Evaluation of the Effectiveness of Phage Therapy for Infections Caused by Gram-Negative Bacteria from the ESKAPE Group and the Reliability of Its Use in Humans

2021 ◽  
Vol 9 (2) ◽  
pp. 206
Author(s):  
Martyna Cieślik ◽  
Natalia Bagińska ◽  
Andrzej Górski ◽  
Ewa Jończyk-Matysiak
Keyword(s):  
Animal Models ◽  
Phage Therapy ◽  
Animal Experiments ◽  
Species Group ◽  
Effectiveness Evaluation ◽  
Gram Negative Bacteria ◽  
Gram Negative ◽  
Enterobacter Species ◽  
The Individual

The authors emphasize how extremely important it is to highlight the role played by animal models in an attempt to determine possible phage interactions with the organism into which it was introduced as well as to determine the safety and effectiveness of phage therapy in vivo taking into account the individual conditions of a given organism and its physiology. Animal models in which phages are used make it possible, among other things, to evaluate the effective therapeutic dose and to choose the possible route of phage administration depending on the type of infection developed. These results cannot be applied in detail to the human body, but the knowledge gained from animal experiments is invaluable and very helpful. We would like to highlight how useful animal models may be for the possible effectiveness evaluation of phage therapy in the case of infections caused by gram-negative bacteria from the ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, Enterobacter species) group of pathogens. In this review, we focus specifically on the data from the last few years.

scholarly journals Graphene and Reproduction: A Love-Hate Relationship

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 547
Author(s):  
Marina Ramal-Sanchez ◽  
Antonella Fontana ◽  
Luca Valbonetti ◽  
Alessandra Ordinelli ◽  
Nicola Bernabò ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reproductive Function ◽  
Scientometric Analysis ◽  
Potential Toxicity ◽  
Good Tool ◽  
Vitro Fertilization ◽  
Number Of Publications ◽  
The Individual

Since its discovery, graphene and its multiple derivatives have been extensively used in many fields and with different applications, even in biomedicine. Numerous efforts have been made to elucidate the potential toxicity derived from their use, giving rise to an adequate number of publications with varied results. On this basis, the study of the reproductive function constitutes a good tool to evaluate not only the toxic effects derived from the use of these materials directly on the individual, but also the potential toxicity passed on to the offspring. By providing a detailed scientometric analysis, the present review provides an updated overview gathering all the research studies focused on the use of graphene and graphene-based materials in the reproductive field, highlighting the consequences and effects reported to date from experiments performed in vivo and in vitro and in different animal species (from Archea to mammals). Special attention is given to the oxidized form of graphene, graphene oxide, which has been recently investigated for its ability to increase the in vitro fertilization outcomes. Thus, the potential use of graphene oxide against infertility is hypothesized here, probably by engineering the spermatozoa and thus manipulating them in a safer and more efficient way.

scholarly journals ANTI-INFLAMMATORY ACTIVITY OF CURCUMIN AND CAPSAICIN AUGMENTED IN COMBINATION

2017 ◽  
Vol 9 (6) ◽  
pp. 145
Author(s):  
Thriveni Vasanth Kumar ◽  
Manjunatha H. ◽  
Rajesh Kp
Keyword(s):  
Acetic Acid ◽  
Protective Effect ◽  
Vascular Permeability ◽  
Diclofenac Sodium ◽  
Significant Inhibition ◽  
Inflammatory Activity ◽  
Anti Inflammatory ◽  
The Individual

Objective: Dietary curcumin and capsaicin are well known for their health beneficial potencies. The current study was done to assess the anti-inflammatory activity of curcumin, capsaicin and their combination by employing in vitro and in vivo models.Methods: We investigated the protective effect of curcumin, capsaicin and their combination using in vitro heat induced human red blood cell (HRBC) membrane stabilisation, in vivo 3% agar induced leukocyte mobilisation and acetic acid induced vascular permeability assay.Results: Curcumin, capsaicin and their combination exhibited concentration dependent protective effect against heat-induced HRBC membrane destabilisation, while combined curcumin and capsaicin restored 87.0±0.64 % membrane stability and it is found to be better than curcumin, capsaicin and diclofenac sodium (75.0±0.25. 72±0.9 and 80.0±0.31 %) protective effect. In agar suspension induced leukocyte mobilization assay, the combined curcumin and capsaicin had shown 39.5±1.58 % of inhibition compared to individual curcumin and capsaicin, which showed moderate inhibition of 16.0±3.14 and 21.6±2.17 % respectively. Besides, the combined curcumin and capsaicin had shown highly significant inhibition of acetic acid-induced vascular permeability in rats (62.0±3.14 %), whereas individual curcumin and capsaicin showed moderate inhibition of vascular permeability with 36.0±2.41 and 43.0±1.92 % respectively.Conclusion: This study demonstrates the significant anti-inflammatory property of combined curcumin and capsaicin at half of the individual concentration of curcumin and capsaicin.

Sign in / Sign up

Export Citation Format

Share Document