scholarly journals Partitive subjects in Estonian dialects

2017 ◽  
Vol 8 (2) ◽  
pp. 191-231
Author(s):  
Liina Lindström
Keyword(s):  
Contact Area ◽  
Powerful Factor ◽  
Usage Frequency ◽  
Frequency Of Use ◽  
Factor Conditioning

Nominative-partitive alternation in subject marking in Estonian occurs mainly in existentials and related constructions. The paper measures the overall frequency of use of partitive subjects (PS) in Estonian dialects to explore whether differences are found, which can be explained by language contacts. Second, it provides an overview of constructions where PSs occur in Estonian dialects. The data is obtained from the Corpus of Estonian Dialects (12 subdialects, 1517 instances of PS usage). The results show that in usage frequency of PSs, Estonian dialects are relatively uniform and there are no striking differences between the dialects. The use of PSs was less frequent in Northern-Seto (a South-Estonian subdialect, in the Russian contact area), where the use of PSs is more tightly associated with negative clauses than it is in other dialects. Negation is also generally the most powerful factor conditioning the use of PSs (explains 52% of the usages of PSs).Kokkuvõte. Liina Lindström: Partitiivsubjekt eesti murretes. Nominatiivipartitiivi vaheldumine subjekti markeerimisel toimub eesti keeles peamiselt eksitentsiaallausetes ja sellega sarnastes konstruktsioonides. Artiklis mõõdetakse partitiivsubjekti esinemissagedust eesti murretes, et leida, kas murrete vahel on olulisi erinevusi partiivsubjekti kasutamisel, ja kas neid erinevusi saab selgitada keelekontaktide mõjuga. Lisaks vaadeldakse konstruktsioone, kus partitiivsubjekt üldse võib esineda. Andmed on pärit eesti murrete korpusest (12 eri murrakut, kokku 1517 partitiivsubjekti kasutusjuhtu). Artiklist selgub, et partitiivsubjekti kasutuse põhjal on eesti murded küllalt sarnased. Pisut vähem kasutati partitiivsubjekti Põhja-Seto tekstides, kus see oli tugevamalt seotud eitusega kui mujal. Eitus oli ka üldiselt kõige olulisem partitiivsubjekti kasutamist mõjutav tegur (52% partitiivsubjektiga lausetest olid eitavad).Võtmesõnad: murdesüntaks; partitiivsubjekt; eristav subjekti markeerimine; eesti murded

Frequency of Use of Automotive Stereo Controls

1998 ◽  
Vol 42 (17) ◽  
pp. 1210-1214 ◽  
Author(s):  
David G. Curry ◽  
Thomas Jaworski
Keyword(s):  
Relative Frequency ◽  
Spatial Relationship ◽  
Extended Period ◽  
User Preference ◽  
Volume Control ◽  
Usage Frequency ◽  
Frequency Of Use ◽  
Final Consideration ◽  
Age Range ◽  
Or Task

The primary determinants of control location are human physiological limitations, spatial relationship to the functions controlled, functional groupings, sequential arrangements, and priority of usage/frequency of use. The first four of these are relatively easy to determine, whether through anthropometrics or task/function analyses, but the final consideration is often less straightforward. The relative frequency of use of a set of controls that are primarily driven not by need, but by user preference are often almost impossible to determine before a product is actually put into use. This paper describes a study designed to evaluate the relative frequency of use of the controls available on automotive stereo products. The study focused on experienced users over an extended period of time and a relatively wide age range. Results indicated that control usage fell into several broad groups, with volume control being the most commonly used function.

Efficacy and Safety of Regular Vitamin and Mineral Supplement Use in France: Results from the ECCA Study

2005 ◽  
Vol 75 (3) ◽  
pp. 201-209 ◽  
Author(s):  
Touvier ◽  
Boutron-Ruault ◽  
Volatier ◽  
Martin
Keyword(s):  
Pantothenic Acid ◽  
Assessment Tools ◽  
Mineral Supplement ◽  
Mineral Supplements ◽  
Supplement Use ◽  
Micronutrient Intake ◽  
Frequency Of Use ◽  
Retail Outlets ◽  
Annual Frequency ◽  
Excessive Intake

This study investigated the prevalence of inadequate micronutrient intake and the proportion of subjects who exceed Tolerable Upper Intake Levels a) with food only, and b) with food+supplements, in a population of French regular supplement users (n = 259). Assessment tools were seven-day records for supplements, three-day records for food intake, and a questionnaire about supplement use. Most subjects were recruited in retail outlets that sold supplements. They were recent users of vitamin/mineral supplements, aged over 15 years, and normo-energy reporters. The prevalence (%) of inadequate intake decreased with the inclusion of mean annual supplements, from 68.0 to 54.8 for magnesium, 55.9 to 40.7 for vitamin C, 53.4 to 43.9 for folic acid, 37.5 to 27.5 for iron, and 40.1 to 29.7 for pantothenic acid. Few subjects exceeded upper intake levels when mean annual intake of supplements was considered. When supplement consumption was considered during the studied week only, the proportion of subjects who were in excess of the upper intake levels was higher (maximum: 9.6% for magnesium). Supplement use brought a nutritional benefit for some targeted nutrients. It was not associated with excessive intake in this study, but could become hazardous if the annual frequency of use were to increase.

Usage Frequency Neglect

2013 ◽  
Author(s):  
Mauricio Mittelman ◽  
Dilney Goncalves
Keyword(s):  
Usage Frequency

Load-Bearing in the Ovine Medial Tibial Condyle: Effect of Meniscectomy

1993 ◽  
Vol 06 (02) ◽  
pp. 100-104 ◽  
Author(s):  
D. M. Pickles ◽  
C. R. Bellenger
Keyword(s):  
Knee Joint ◽  
Contact Area ◽  
Mammalian Species ◽  
Total Removal ◽  
Load Bearing ◽  
Human Knee ◽  
Biochemical Effects ◽  
Pressure Sensitive ◽  
Medial Meniscectomy ◽  
Tibial Condyle

SummaryTotal removal of a knee joint meniscus is followed by osteoarthritis in many mammalian species. Altered load-bearing has been observed in the human knee following meniscectomy but less is known about biochemical effects of meniscectomy in other species. Using pressure sensitive paper in sheep knee (stifle) joints it was found that, for comparable loads, the load-bearing area on the medial tibial condyle was significantly reduced following medial meniscectomy. Also, for loads of between 50 N and 500 N applied to the whole joint, the slope of the regression of contact area against load was much smaller. Following medial meniscectomy, the ability to increase contact area as load increased was markedly reduced.The load bearing area on the medial tibial condyle was reduced following meniscectomy.

Adjectives and their keyness: a corpus-based analysis of tourism discourse in English

Corpora ◽  
2019 ◽  
Vol 14 (3) ◽  
pp. 351-378 ◽  
Author(s):  
Isabel Durán-Muñoz
Keyword(s):  
Domain Specific ◽  
Adventure Tourism ◽  
Frequency Of Use ◽  
Relevant Reference ◽  
The Difference ◽  
Do So

This paper attempts to shed some light on the importance of adjectives in the linguistic characterisation of tourism discourse in English in general and in adventure tourism in particular as well as to prove how significant the difference in usage is compared to the general language. It seeks to understand the role that adjectives play in this specific subdomain and to contribute to the linguistic characterisation of tourism discourse in this respect. It also aims to confirm or reject previous assumptions regarding the use, and frequency of use, of adjectives and adjectival patterns in this specialised domain and, in general, to promote the study of adjectivisation in domain-specific discourses. To do so, it proposes a corpus-based study that measures the keyness of adjectives in promotional texts of the adventure tourism domain in English by comparing their usage in the compiled corpus to the two most relevant reference corpora of English (coca and the bnc).

An Analytical Thermodynamic Approach to Friction of Rubber on Ice

2012 ◽  
Vol 40 (2) ◽  
pp. 124-150
Author(s):  
Klaus Wiese ◽  
Thiemo M. Kessel ◽  
Reinhard Mundl ◽  
Burkhard Wies
Keyword(s):  
Coefficient Of Friction ◽  
Liquid Layer ◽  
Contact Area ◽  
Leading Edge ◽  
Viscous Friction ◽  
Analytical Approximation ◽  
Real Contact Area ◽  
Length Scales ◽  
Real Contact ◽  
Ice Surface

ABSTRACT The presented investigation is motivated by the need for performance improvement in winter tires, based on the idea of innovative “functional” surfaces. Current tread design features focus on macroscopic length scales. The potential of microscopic surface effects for friction on wintery roads has not been considered extensively yet. We limit our considerations to length scales for which rubber is rough, in contrast to a perfectly smooth ice surface. Therefore we assume that the only source of frictional forces is the viscosity of a sheared intermediate thin liquid layer of melted ice. Rubber hysteresis and adhesion effects are considered to be negligible. The height of the liquid layer is driven by an equilibrium between the heat built up by viscous friction, energy consumption for phase transition between ice and water, and heat flow into the cold underlying ice. In addition, the microscopic “squeeze-out” phenomena of melted water resulting from rubber asperities are also taken into consideration. The size and microscopic real contact area of these asperities are derived from roughness parameters of the free rubber surface using Greenwood-Williamson contact theory and compared with the measured real contact area. The derived one-dimensional differential equation for the height of an averaged liquid layer is solved for stationary sliding by a piecewise analytical approximation. The frictional shear forces are deduced and integrated over the whole macroscopic contact area to result in a global coefficient of friction. The boundary condition at the leading edge of the contact area is prescribed by the height of a “quasi-liquid layer,” which already exists on the “free” ice surface. It turns out that this approach meets the measured coefficient of friction in the laboratory. More precisely, the calculated dependencies of the friction coefficient on ice temperature, sliding speed, and contact pressure are confirmed by measurements of a simple rubber block sample on artificial ice in the laboratory.

Measurement and Visualization of the Contact Pressure Distribution of Rubber Disks and Tires

1995 ◽  
Vol 23 (4) ◽  
pp. 238-255 ◽  
Author(s):  
E. H. Sakai
Keyword(s):  
Pressure Distribution ◽  
Contact Pressure ◽  
Contact Area ◽  
Light Absorption ◽  
Lateral Force ◽  
Contact Pressure Distribution ◽  
High Definition ◽  
The Road ◽  
Close Relationship ◽  
Processing Techniques

Abstract The contact conditions of a tire with the road surface have a close relationship to various properties of the tire and are among the most important characteristics in evaluating the performance of the tire. In this research, a new measurement device was developed that allows the contact stress distribution to be quantified and visualized. The measuring principle of this device is that the light absorption at the interface between an optical prism and an evenly ground or worn rubber surface is a function of contact pressure. The light absorption can be measured at a number of points on the surface to obtain the pressure distribution. Using this device, the contact pressure distribution of a rubber disk loaded against a plate was measured. It was found that the pressure distribution was not flat but varied greatly depending upon the height and diameter of the rubber disk. The variation can be explained by a “spring” effect, a “liquid” effect, and an “edge” effect of the rubber disk. Next, the measurement and image processing techniques were applied to a loaded tire. A very high definition image was obtained that displayed the true contact area, the shape of the area, and the pressure distribution from which irregular wear was easily detected. Finally, the deformation of the contact area and changes in the pressure distribution in the tread rubber block were measured when a lateral force was applied to the loaded tire.

Issues on Design of Piled Raft Foundation

2018 ◽  
Vol 14 (1) ◽  
pp. 6057-6061 ◽  
Author(s):  
Padmanaban M S ◽  
J Sreerambabu
Keyword(s):  
Contact Area ◽  
Concrete Slab ◽  
Design Procedure ◽  
Bending Moment ◽  
Foundation Design ◽  
Detailed Review ◽  
Piled Raft ◽  
Piled Raft Foundation ◽  
Raft Foundation ◽  
Influencing Parameters

A piled raft foundation consists of a thick concrete slab reinforced with steel which covers the entire contact area of the structure, in which the raft is supported by a group of piles or a number of individual piles. Bending moment on raft, differential and average settlement, pile and raft geometries are the influencing parameters of the piled raft foundation system. In this paper, a detailed review has been carried out on the issues on the raft foundation design. Also, the existing design procedure was explained.

Cytomorphometric characteristics of imprints of the contact area between the gingiva and the dental implant after one-step implantation

2017 ◽  
pp. 77-82
Author(s):  
А.С. Рыбалко ◽  
А.С. Григорьян ◽  
А.А. Орлов
Keyword(s):  
Dental Implants ◽  
Dental Implant ◽  
Contact Area ◽  
Inflammatory Reactions ◽  
Diagnosis And Prognosis ◽  
Dental Implantation ◽  
Data Points ◽  
One Step ◽  
Cytological Method ◽  
Clinical Pictures

Цель исследования состояла в разработке неинвазивного метода диагностики состояния тканей периимплантационной зоны после постановки дентальных имплантатов, а также прогноза течения послеоперационного периода и ранней диагностики послеоперационных осложнений, таких, как мукозит и периимплантит, при одноэтапном методе дентальной имплантации. Методы. В исследовании представлена цитологическая характеристика отпечатков из области контакта имплантата с десной, в которых оценивали состояние эпителиальных клеток при различных проявлениях цитопатологии. Определяли индекс деструкции (ИД) и воспалительно-деструктивный индекс (ВДИ) в клетках воспалительного инфильтрата, которые сопоставляли с клинической картиной течения послеоперационного периода. Сроки забора цитологического материала 1, 5, 15, 25, 30, 60, 120 дней после постановки имплантатов. Количество исследованных цитограмм - 442 от 11 пациентов (по 1-2 имплантата). Общий массив использованных для вычисления интегральных показателей составил »2550. Результаты. Было установлено, что в сроки 1-5 дней после постановки дентальных имплантатов происходит резкое повышение показателей ИД (до 7500 ± 15) и ВДИ (до 80 ± 20), что отражает процесс развития в области имплантатов острых воспалительных реакций. В отдаленные сроки наблюдений отмечалось 2 варианта развития событий. Первый из них характеризовался сохранением во все сроки высоких показателей ИД и ВДИ. Для второго варианта динамики показателей было характерно их падение, что соответствовало развитию процесса остеоинтеграции дентальных имплантатов. The objectives of the investigation were to develop protocols evaluating the validity and effectiveness of the cytological method for diagnosis and prognosis of tissue conditions adjacent to a dental implant. Methods. This study examined the cytological characteristics of imprints of the gingiva-implant contact area, a. the correlation of quantitative ratios of epithelial cells either with or without hystopathological manifestations (an index of destruction, ID); b. ratio of cells of the inflammatory infiltrate (an inflammatory and destructive index, IDI); these data were researched in relation with dynamics of the clinical pictures during a postoperative period.The cytological material was obtained 1, 5, 15, 25, 30, 60, 120 days after dental implantation. Totally 442 cytogramme from 11 patients (1-2 implant per a patient) were assayed. The data array for computation of integrated indicators was composed of ca. 2550 data points. Results. A significant increase of ID (7500 ± 15) and IDI (80 ± 20) indicators, which reflects the development of acute inflammatory reactions in tissues neighboring an implant, was observed within 1-5 days following the insertion of dental implants. Long-term observations revealed two scenarios. The first scenario was characterized by the retention of high levels of ID and IDI over the period of observations. The second scenario featured the reduction of ID and IDI indices, which corresponded to the development of the osseointegration of dental implants.

Sign in / Sign up

Export Citation Format

Share Document