Advanced, Cost Effective and Sustainable Transparent Conductors Based on Titania for Large Area Applications

2013 ◽  
Author(s):  
M. Junghähnel ◽  
T. Kopte
Keyword(s):  
Cost Effective ◽  
Transparent Conductors ◽  
Large Area

scholarly journals Strong texture tuning along different crystalline directions in glass-supported CeO2 thin films by ultrasonic spray pyrolysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Inti Zumeta-Dubé ◽  
José Manuel García Rangel ◽  
Jorge Roque ◽  
Issis Claudette Romero-Ibarra ◽  
Mario Fidel García Sánchez
Keyword(s):  
Thin Films ◽  
Spray Pyrolysis ◽  
Spray Pyrolysis Technique ◽  
Morphological Characteristics ◽  
Ultrasonic Spray Pyrolysis ◽  
Cost Effective ◽  
Growth Direction ◽  
Large Area ◽  
Smart Windows ◽  
Ultrasonic Spray

AbstractThe strong facet-dependent performance of glass-supported CeO2 thin films in different applications (catalysis, smart windows, etc.) has been the target of diverse fundamental and technological approaches. However, the design of accurate, cost-effective and scalable methods with the potential for large-area coverage that produce highly textured glass-supported CeO2 thin films remains a technological challenge. In the present work, it is demonstrated that under proper tuning conditions, the ultrasonic spray pyrolysis technique enables one to obtain glass-supported polycrystalline CeO2 films with noticeable texture along both the (100) and (111) directions, as well as with randomly oriented crystallites (no texture). The influence of flow rates, solution molarity, and substrate temperature on the texture and morphological characteristics, as well as optical absorption and Raman response of the deposited films, is evaluated. The obtained results are discussed on the basis of the combined dependence of the CeO2-exposed surfaces on the thermodynamic stability of the corresponding facets and the reaction kinetics, which modulate the crystallite growth direction.

scholarly journals All-Organic, Low Voltage, Transparent and Compliant Organic Field-Effect Transistor Fabricated by Means of Large-Area, Cost-Effective Techniques

2020 ◽  
Vol 10 (19) ◽  
pp. 6656
Author(s):  
Stefano Lai ◽  
Giulia Casula ◽  
Pier Carlo Ricci ◽  
Piero Cosseddu ◽  
Annalisa Bonfiglio
Keyword(s):  
Field Effect ◽  
Low Voltage ◽  
Field Effect Transistors ◽  
High Mobility ◽  
Chemical Vapor ◽  
Cost Effective ◽  
Large Area ◽  
Parylene C ◽  
Biomedical Sensing ◽  
Novel Applications

The development of electronic devices with enhanced properties of transparency and conformability is of high interest for the development of novel applications in the field of bioelectronics and biomedical sensing. Here, a fabrication process for all organic Organic Field-Effect Transistors (OFETs) by means of large-area, cost-effective techniques such as inkjet printing and chemical vapor deposition is reported. The fabricated device can operate at low voltages (as high as 4 V) with ideal electronic characteristics, including low threshold voltage, relatively high mobility and low subthreshold voltages. The employment of organic materials such as Parylene C, PEDOT:PSS and 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS pentacene) helps to obtain highly transparent transistors, with a relative transmittance exceeding 80%. Interestingly enough, the proposed process can be reliably employed for OFET fabrication over different kind of substrates, ranging from transparent, flexible but relatively thick polyethylene terephthalate (PET) substrates to transparent, 700-nm-thick, compliant Parylene C films. OFETs fabricated on such sub-micrometrical substrates maintain their functionality after being transferred onto complex surfaces, such as human skin and wearable items. To this aim, the electrical and electromechanical stability of proposed devices will be discussed.

Engineering the shape of Zinc Oxide crystals via sonochemical or hydrothermal solution-based methods

2008 ◽  
Vol 1087 ◽  
Author(s):  
Marco Palumbo ◽  
Simon J. Henley ◽  
Thierry Lutz ◽  
Vlad Stolojan ◽  
David Cox ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Self Assembly ◽  
Hydrothermal Solution ◽  
Good Control ◽  
Transparent Conductors ◽  
Zno Nanostructures ◽  
Large Area ◽  
Light Emitting Devices ◽  
Wide Range ◽  
Solution Methods

AbstractRecent results in the use of Zinc Oxide (ZnO) nano/submicron crystals in fields as diverse as sensors, UV lasers, solar cells, piezoelectric nanogenerators and light emitting devices have reinvigorated the interest of the scientific community in this material. To fully exploit the wide range of properties offered by ZnO, a good understanding of the crystal growth mechanism and related defects chemistry is necessary. However, a full picture of the interrelation between defects, processing and properties has not yet been completed, especially for the ZnO nanostructures that are now being synthesized. Furthermore, achieving good control in the shape of the crystal is also a very desirable feature based on the strong correlation there is between shape and properties in nanoscale materials. In this paper, the synthesis of ZnO nanostructures via two alternative aqueous solution methods - sonochemical and hydrothermal - will be presented, together with the influence that the addition of citric anions or variations in the concentration of the initial reactants have on the ZnO crystals shape. Foreseen applications might be in the field of sensors, transparent conductors and large area electronics possibly via ink-jet printing techniques or self-assembly methods.

scholarly journals Electrochemical Impedance Spectroscopy Analysis of Hole Transporting Material Free Mesoporous and Planar Perovskite Solar Cells

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1635
Author(s):  
Sumayya M. Abdulrahim ◽  
Zubair Ahmad ◽  
Jolly Bahadra ◽  
Noora J. Al-Thani
Keyword(s):  
Solar Cells ◽  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Electrochemical Impedance ◽  
Perovskite Solar Cells ◽  
Cost Effective ◽  
Hole Transport ◽  
Large Area ◽  
The Future ◽  
Hole Transporting Material

The future photovoltaic technologies based on perovskite materials are aimed to build low tech, truly economical, easily fabricated, broadly deployable, and trustworthy solar cells. Hole transport material (HTM) free perovskite solar cells (PSCs) are among the most likely architectures which hold a distinctive design and provide a simple way to produce large-area and cost-effective manufacture of PSCs. Notably, in the monolithic scheme of the HTM-free PSCs, all layers can be printed using highly reproducible and morphology-controlled methods, and this design has successfully been demonstrated for industrial-scale fabrication. In this review article, we comprehensively describe the recent advancements in the different types of mesoporous (nanostructured) and planar HTM-free PSCs. In addition, the effect of various nanostructures and mesoporous layers on their performance is discussed using the electrochemical impedance spectroscopy (EIS) technique. We bring together the different perspectives that researchers have developed to interpret and analyze the EIS data of the HTM-free PSCs. Their analysis using the EIS tool, the limitations of these studies, and the future work directions to overcome these limitations to enhance the performance of HTM-free PSCs are comprehensively considered.

scholarly journals Polymer Composites with Oriented Magnetic Nanowires as Fillers

2007 ◽  
Vol 1058 ◽  
Author(s):  
Li Sun ◽  
Kusuma Keshoju
Keyword(s):  
Elastic Modulus ◽  
Optical Tweezers ◽  
Cost Effective ◽  
Tensile Tests ◽  
Metallic Nickel ◽  
Large Area ◽  
Load Direction ◽  
Nickel Nanowires ◽  
Microfluidic Flow ◽  
Composite Samples

ABSTRACTMetallic nickel nanowires with excellent physical properties have been introduced into polydimethylsiloxane matrix to form polymer nanocomposites. Nanowires were synthesized by template-assisted electrochemical deposition. By utilizing ferromagnetic nickel nanowires, small external magnetic field can be used to control their alignment and distribution during composite synthesis. Unlike dielectrophoresis, optical tweezers, and microfluidic flow control, magnetic manipulation provides a cost-effective, non-contact, and versatile approach to control nanostructured materials in fluids over a large area. Polydimethylsiloxane composites with nanowires arranged in longitudinal, transverse, and random orientations with respect to the applied load direction were studied. Tensile tests showed that the composites with longitudinal arrangement have higher elastic modulus and tensile strength than the other composite samples. Experimentally obtained elastic modulus values were compared with the prediction of classical Halpin-Tsai model. Metallic nickel nanowires with excellent physical properties have been introduced into polydimethylsiloxane matrix to form polymer nanocomposites. Nanowires were synthesized by template-assisted electrochemical deposition. By utilizing ferromagnetic nickel nanowires, small external magnetic field can be used to control their alignment and distribution during composite synthesis. Unlike dielectrophoresis, optical tweezers, and microfluidic flow control, magnetic manipulation provides a cost-effective, non-contact, and versatile approach to control nanostructured materials in fluids over a large area. Polydimethylsiloxane composites with nanowires arranged in longitudinal, transverse, and random orientations with respect to the applied load direction were studied. Tensile tests showed that the composites with longitudinal arrangement have higher elastic modulus and tensile strength than the other composite samples. Experimentally obtained elastic modulus values were compared with the prediction of classical Halpin-Tsai model.

Graphene-based large area dye-sensitized solar cell modules

Nanoscale ◽  
2016 ◽  
Vol 8 (9) ◽  
pp. 5368-5378 ◽  
Author(s):  
Simone Casaluci ◽  
Mauro Gemmi ◽  
Vittorio Pellegrini ◽  
Aldo Di Carlo ◽  
Francesco Bonaccorso
Keyword(s):  
Solar Cell ◽  
Spray Coating ◽  
Cost Effective ◽  
Dye Sensitized Solar Cell ◽  
Photovoltaic Devices ◽  
Large Area ◽  
Dye Sensitized ◽  
Cell Modules ◽  
Viable Method ◽  
The Way

We demonstrated the spray coating of graphene ink as a viable method for large-area fabrication of graphene-based dye-sensitized solar cell modules, paving the way to all-printed, transparent and cost-effective large-area photovoltaic devices.

scholarly journals Printed, cost-effective and stable poly(3-hexylthiophene) electrolyte-gated field-effect transistors

2020 ◽  
Vol 8 (43) ◽  
pp. 15312-15321
Author(s):  
Davide Blasi ◽  
Fabrizio Viola ◽  
Francesco Modena ◽  
Axel Luukkonen ◽  
Eleonora Macchia ◽  
...  
Keyword(s):  
Field Effect ◽  
Field Effect Transistor ◽  
Field Effect Transistors ◽  
Cost Effective ◽  
Continuous Operation ◽  
Large Area ◽  
Ink Jet ◽  
Effect Transistor

A large-area processable ink-jet-printed poly(3-hexylthiophene) electrolyte-gated field-effect transistor, designed for bioelectronic applications, is proven to be stable for one week of continuous operation.

scholarly journals Metal-induced n+/n homojunction for ultrahigh electron mobility transistors

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Ji-Min Park ◽  
Hyoung-Do Kim ◽  
Hongrae Joh ◽  
Seong Cheol Jang ◽  
Kyung Park ◽  
...  
Keyword(s):  
Metal Oxide ◽  
Field Effect ◽  
Density Functional ◽  
Metal Layer ◽  
Cost Effective ◽  
Interface Layer ◽  
Field Effect Mobility ◽  
High Concentration ◽  
Large Area ◽  
Electron Mobility Transistors

AbstractA self-organized n+/n homojunction is proposed to achieve ultrahigh performance of thin film transistors (TFTs) based on an amorphous (Zn,Ba)SnO3 (ZBTO) semiconductor with sufficiently limited scattering centers. A deposited Al layer can induce a highly O-deficient (n+) interface layer in the back channel of a-ZBTO without damaging the front channel layer via the formation of a metal-oxide interlayer between the metal and back channel. The n+ layer can significantly improve the field-effect mobility by providing a relatively high concentration of free electrons in the front n-channel ZBTO, where the scattering of carriers is already controlled. In comparison with a Ti layer, the Al metal layer is superior, as confirmed by first-principles density functional theory (DFT) calculations, due to the stronger metal-O bonds, which make it easier to form a metal oxide AlOx interlayer through the removal of oxygen from ZBTO. The field-effect mobility of a-ZBTO with an Al capping layer can reach 153.4 cm2/Vs, which is higher than that of the pristine device, i.e., 20.8 cm2/Vs. This result paves the way for the realization of a cost-effective method for implementing indium-free ZBTO devices in various applications, such as flat panel displays and large-area electronic circuits.

Sign in / Sign up

Export Citation Format

Share Document