scholarly journals Polymer Composites with Oriented Magnetic Nanowires as Fillers

2007 ◽  
Vol 1058 ◽  
Author(s):  
Li Sun ◽  
Kusuma Keshoju
Keyword(s):  
Elastic Modulus ◽  
Optical Tweezers ◽  
Cost Effective ◽  
Tensile Tests ◽  
Metallic Nickel ◽  
Large Area ◽  
Load Direction ◽  
Nickel Nanowires ◽  
Microfluidic Flow ◽  
Composite Samples

ABSTRACTMetallic nickel nanowires with excellent physical properties have been introduced into polydimethylsiloxane matrix to form polymer nanocomposites. Nanowires were synthesized by template-assisted electrochemical deposition. By utilizing ferromagnetic nickel nanowires, small external magnetic field can be used to control their alignment and distribution during composite synthesis. Unlike dielectrophoresis, optical tweezers, and microfluidic flow control, magnetic manipulation provides a cost-effective, non-contact, and versatile approach to control nanostructured materials in fluids over a large area. Polydimethylsiloxane composites with nanowires arranged in longitudinal, transverse, and random orientations with respect to the applied load direction were studied. Tensile tests showed that the composites with longitudinal arrangement have higher elastic modulus and tensile strength than the other composite samples. Experimentally obtained elastic modulus values were compared with the prediction of classical Halpin-Tsai model. Metallic nickel nanowires with excellent physical properties have been introduced into polydimethylsiloxane matrix to form polymer nanocomposites. Nanowires were synthesized by template-assisted electrochemical deposition. By utilizing ferromagnetic nickel nanowires, small external magnetic field can be used to control their alignment and distribution during composite synthesis. Unlike dielectrophoresis, optical tweezers, and microfluidic flow control, magnetic manipulation provides a cost-effective, non-contact, and versatile approach to control nanostructured materials in fluids over a large area. Polydimethylsiloxane composites with nanowires arranged in longitudinal, transverse, and random orientations with respect to the applied load direction were studied. Tensile tests showed that the composites with longitudinal arrangement have higher elastic modulus and tensile strength than the other composite samples. Experimentally obtained elastic modulus values were compared with the prediction of classical Halpin-Tsai model.

scholarly journals Influence of Polypropylene Fiber on Tensile Property of a Cement-Polymer Based Thin Spray-On Liner

2019 ◽  
Vol 9 (14) ◽  
pp. 2876 ◽  
Author(s):  
Wei ◽  
Zhang ◽  
Feng ◽  
Xie ◽  
Wu ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Elastic Modulus ◽  
Polypropylene Fiber ◽  
Tensile Tests ◽  
Control Group ◽  
Load Direction ◽  
Low Elastic Modulus ◽  
The Matrix ◽  
Test Result ◽  
Tensile Toughness

The influence of a polypropylene fiber on the tensile properties of a cement-polymer based thin spray-on liner (TSL) was investigated in this study. Two different contents of fiber were added to the liner, yielding two TSL groups. Tensile tests were performed (in accordance with the ASTM D638 standard) on the two groups of specimens as well as the control group at 1, 7, 14, and 28-day curing. The test result verified the large plasticity and low elastic modulus of the TSL compared with the fiber. SEM examination revealed that fibers lying parallel to the load direction ruptured or were pulled out from the matrix, which was beneficial to the tensile strength, but detrimental to the elongation because of their high stiffness. Other fibers lying perpendicular with the load direction were detrimental to both tensile strength and elongation through aggravating the propagation of the cracks. The tensile strength was improved by fiber incorporation, while the elongation was reduced at all curing. The influence of fibers on tensile toughness was uncertain since tensile toughness depended on strength as well as deformity.

The Formability and Elongation of Aluminum Alloys AA5083 and AA3003 for Micro-Truss Sandwiches Manufacturing

2020 ◽  
Vol 38 (9A) ◽  
pp. 1396-1405
Author(s):  
Arwa F. Tawfeeq ◽  
Matthew R. Barnett
Keyword(s):  
Aluminum Alloy ◽  
Strain Rate ◽  
Cost Effective ◽  
Tensile Tests ◽  
Truss Structures ◽  
High Quality ◽  
Trade Off ◽  
Clad Layer ◽  
Higher Temperature ◽  
Different Shapes

The development in the manufacturing of micro-truss structures has demonstrated the effectiveness of brazing for assembling these sandwiches, which opens new opportunities for cost-effective and high-quality truss manufacturing. An evolving idea in micro-truss manufacturing is the possibility of forming these structures in different shapes with the aid of elevated temperature. This work investigates the formability and elongation of aluminum alloy sheets typically used for micro-truss manufacturing, namely AA5083 and AA3003. Tensile tests were performed at a temperature in the range of 25-500 ○C and strain rate in the range of 2x10-4 -10-2 s-1. The results showed that the clad layer in AA3003 exhibited an insignificant effect on the formability and elongation of AA3003. The formability of the two alloys was improved significantly with values of m as high as 0.4 and 0.13 for AA5083 and AA3003 at 500 °C. While the elongation of both AA5083 and AA3003 was improved at a higher temperature, the elongation of AA5083 was inversely related to strain rate. It was concluded that the higher the temperature is the better the formability and elongation of the two alloys but at the expense of work hardening. This suggests a trade-off situation between formability and strength. 

scholarly journals Strong texture tuning along different crystalline directions in glass-supported CeO2 thin films by ultrasonic spray pyrolysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Inti Zumeta-Dubé ◽  
José Manuel García Rangel ◽  
Jorge Roque ◽  
Issis Claudette Romero-Ibarra ◽  
Mario Fidel García Sánchez
Keyword(s):  
Thin Films ◽  
Spray Pyrolysis ◽  
Spray Pyrolysis Technique ◽  
Morphological Characteristics ◽  
Ultrasonic Spray Pyrolysis ◽  
Cost Effective ◽  
Growth Direction ◽  
Large Area ◽  
Smart Windows ◽  
Ultrasonic Spray

AbstractThe strong facet-dependent performance of glass-supported CeO2 thin films in different applications (catalysis, smart windows, etc.) has been the target of diverse fundamental and technological approaches. However, the design of accurate, cost-effective and scalable methods with the potential for large-area coverage that produce highly textured glass-supported CeO2 thin films remains a technological challenge. In the present work, it is demonstrated that under proper tuning conditions, the ultrasonic spray pyrolysis technique enables one to obtain glass-supported polycrystalline CeO2 films with noticeable texture along both the (100) and (111) directions, as well as with randomly oriented crystallites (no texture). The influence of flow rates, solution molarity, and substrate temperature on the texture and morphological characteristics, as well as optical absorption and Raman response of the deposited films, is evaluated. The obtained results are discussed on the basis of the combined dependence of the CeO2-exposed surfaces on the thermodynamic stability of the corresponding facets and the reaction kinetics, which modulate the crystallite growth direction.

scholarly journals Mechanical and thermal stability of retained austenite in plastically deformed bainite-based TRIP-aided medium-Mn steels

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
Aleksandra Kozłowska ◽  
Adam Grajcar ◽  
Aleksandra Janik ◽  
Krzysztof Radwański ◽  
Ulrich Krupp ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Retained Austenite ◽  
Elevated Temperatures ◽  
Mechanical Performance ◽  
Mechanical Stability ◽  
Electron Backscatter Diffraction ◽  
Cost Effective ◽  
Tensile Tests ◽  
Thermal Stability Of

AbstractAdvanced medium-Mn sheet steels show an opportunity for the development of cost-effective and light-weight automotive parts with improved safety and optimized environmental performance. These steels utilize the strain-induced martensitic transformation of metastable retained austenite to improve the strength–ductility balance. The improvement of mechanical performance is related to the tailored thermal and mechanical stabilities of retained austenite. The mechanical stability of retained austenite was estimated in static tensile tests over a wide temperature range from 20 °C to 200 °C. The thermal stability of retained austenite during heating at elevated temperatures was assessed by means of dilatometry. The phase composition and microstructure evolution were investigated by means of scanning electron microscopy, electron backscatter diffraction, X-ray diffraction and transmission electron microscopy techniques. It was shown that the retained austenite stability shows a pronounced temperature dependence and is also stimulated by the manganese addition in a 3–5% range.

scholarly journals All-Organic, Low Voltage, Transparent and Compliant Organic Field-Effect Transistor Fabricated by Means of Large-Area, Cost-Effective Techniques

2020 ◽  
Vol 10 (19) ◽  
pp. 6656
Author(s):  
Stefano Lai ◽  
Giulia Casula ◽  
Pier Carlo Ricci ◽  
Piero Cosseddu ◽  
Annalisa Bonfiglio
Keyword(s):  
Field Effect ◽  
Low Voltage ◽  
Field Effect Transistors ◽  
High Mobility ◽  
Chemical Vapor ◽  
Cost Effective ◽  
Large Area ◽  
Parylene C ◽  
Biomedical Sensing ◽  
Novel Applications

The development of electronic devices with enhanced properties of transparency and conformability is of high interest for the development of novel applications in the field of bioelectronics and biomedical sensing. Here, a fabrication process for all organic Organic Field-Effect Transistors (OFETs) by means of large-area, cost-effective techniques such as inkjet printing and chemical vapor deposition is reported. The fabricated device can operate at low voltages (as high as 4 V) with ideal electronic characteristics, including low threshold voltage, relatively high mobility and low subthreshold voltages. The employment of organic materials such as Parylene C, PEDOT:PSS and 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS pentacene) helps to obtain highly transparent transistors, with a relative transmittance exceeding 80%. Interestingly enough, the proposed process can be reliably employed for OFET fabrication over different kind of substrates, ranging from transparent, flexible but relatively thick polyethylene terephthalate (PET) substrates to transparent, 700-nm-thick, compliant Parylene C films. OFETs fabricated on such sub-micrometrical substrates maintain their functionality after being transferred onto complex surfaces, such as human skin and wearable items. To this aim, the electrical and electromechanical stability of proposed devices will be discussed.

Initial properties and ageing behaviour of pineapple leaf and palm fibre as reinforcement for polypropylene

2016 ◽  
Vol 30 (2) ◽  
pp. 174-195 ◽  
Author(s):  
Rungsima Chollakup ◽  
Haroutioun Askanian ◽  
Florence Delor-Jestin
Keyword(s):  
Mechanical Properties ◽  
Cost Effective ◽  
Tensile Tests ◽  
Natural Fibre ◽  
Thermal Ageing ◽  
Second Step ◽  
Scanning Calorimetry ◽  
Ultraviolet Exposure ◽  
Palm Fibre

In the furniture, automotive and contruction industries, there is increased demand for cost-effective and lightweight biocomposites. The objective of this work was to develop new natural fibre-based composites with specific properties. Palm and pineapple leaf fibres were chosen in association with polypropylene (PP). The first step was to investigate the effect of these natural fibres as reinforcement for PP. The evolution of chemical structure and crystallinity was proposed with infrared spectroscopy measurements and differential scanning calorimetry thermograms, respectively. The assessments of mechanical properties with tensile tests and melt viscoelastic behaviour were also investigated. The study enabled to distinguish the influence of fibre content. The second step in our work was to assess the composite durability after ultraviolet exposure or thermal ageing. The oxidation level was calculated. The long-term evolution of thermal and mechanical properties was also proposed. As a result, the PP/pineapple leaf composite revealed a promising biocomposite.

scholarly journals The Effect of Copper and Brass on Friction Stir Welded Dissimilar Aluminium Alloy When Used as in Thin Sheet Form

2016 ◽  
Vol 45 (2) ◽  
pp. 118-122
Author(s):  
G. Gopala Krishna ◽  
P.Ram Reddy ◽  
M.Manzoor Hussain
Keyword(s):  
Aluminium Alloy ◽  
Aluminium Alloys ◽  
Low Cost ◽  
Thin Sheet ◽  
Welding Process ◽  
Cost Effective ◽  
Tensile Tests ◽  
Fusion Welding ◽  
Friction Stir ◽  
Effect Of Copper

In recent year’s aluminium and aluminium alloys are most widely used in many applications because of light weight, good formability and malleability, corrosion resistance, moderate strength and low cost. Friction Stir Welding (FSW) process is efficient and cost effective method for welding aluminium and aluminium alloys. FSW is a solid state welding process that means the material is not melted during the process. Complete welding process accomplishes below the melting point of materials so it overcomes many welding defects that usually happens with conventional fusion welding technique which were initially used for low melting materials. Though this process is initially developed for low melting materials but now process is widely used for a variety of other materials including titanium, steel and also for composites. The present butt jointed FSW experimental work has been done in two ways. Initially a comparison of tensile properties of friction stir (FS) welded similar aluminium alloy (AA6351 with AA6351) and dissimilar aluminium alloy (AA6351 with AA5083) combinations. Later the effect of impurities (copper and brass) in sheet form (0.1 mm thick) when used as insert in between two dissimilar aluminium alloy (AA6351 with AA5083) plates during FSW. Tensile tests were performed for these combinations and results were compared for with and without using strip material (copper and brass).

Performance of All-Polypropylene Composites at LNG Temperatures

2017 ◽  
Author(s):  
Bilim Atli-Veltin
Keyword(s):  
Composite Materials ◽  
Mechanical Performance ◽  
Cost Effective ◽  
Tensile Tests ◽  
Small Scale ◽  
Failure Behavior ◽  
Polypropylene Composites ◽  
Design Flexibility ◽  
Static Tensile ◽  
Interlaminar Shear

In the small scale LNG infrastructure, composite materials are scarcely employed. Potentially, cost effective solutions for LNG applications could be developed thanks to the advantages of composite materials over metals such as weight savings, design flexibility and recyclability. The research presented in this paper focuses on the mechanical performance of fully recyclable, thermoplastic Polypropylene (PP) composite tapes at cryogenic LNG temperatures. Quasi-static tensile tests performed on [±45] laminates made of plain woven plies of PURE® show that at −196°C the behavior is bilinear with the failure strain of 6.5% and failure stress of 37 MPa. Such non-brittle failure behavior of PP is desirable for cryogenic applications. The other results presented in the paper contains [0/90] laminate results and the interlaminar shear strength characteristics at room and cryogenic temperatures.

scholarly journals Electrochemical Impedance Spectroscopy Analysis of Hole Transporting Material Free Mesoporous and Planar Perovskite Solar Cells

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1635
Author(s):  
Sumayya M. Abdulrahim ◽  
Zubair Ahmad ◽  
Jolly Bahadra ◽  
Noora J. Al-Thani
Keyword(s):  
Solar Cells ◽  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Electrochemical Impedance ◽  
Perovskite Solar Cells ◽  
Cost Effective ◽  
Hole Transport ◽  
Large Area ◽  
The Future ◽  
Hole Transporting Material

The future photovoltaic technologies based on perovskite materials are aimed to build low tech, truly economical, easily fabricated, broadly deployable, and trustworthy solar cells. Hole transport material (HTM) free perovskite solar cells (PSCs) are among the most likely architectures which hold a distinctive design and provide a simple way to produce large-area and cost-effective manufacture of PSCs. Notably, in the monolithic scheme of the HTM-free PSCs, all layers can be printed using highly reproducible and morphology-controlled methods, and this design has successfully been demonstrated for industrial-scale fabrication. In this review article, we comprehensively describe the recent advancements in the different types of mesoporous (nanostructured) and planar HTM-free PSCs. In addition, the effect of various nanostructures and mesoporous layers on their performance is discussed using the electrochemical impedance spectroscopy (EIS) technique. We bring together the different perspectives that researchers have developed to interpret and analyze the EIS data of the HTM-free PSCs. Their analysis using the EIS tool, the limitations of these studies, and the future work directions to overcome these limitations to enhance the performance of HTM-free PSCs are comprehensively considered.

Additive Manufacturing of Porous Ceramics with Foaming Agent

2021 ◽  
pp. 1-21
Author(s):  
Zipeng Guo ◽  
Lu An ◽  
Sushil Lakshmanan ◽  
Jason Armstrong ◽  
Shenqiang Ren ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Ambient Pressure ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Cost Effective ◽  
Tensile Tests ◽  
Porous Ceramics ◽  
Foaming Agent ◽  
Printing Quality ◽  
And Control

Abstract The macro-porous ceramics has promising durability and thermal insulation performance. As porous ceramics find more and more applications across many industries, a cost-effective and scalable additive manufacturing technique for fabricating macro-porous ceramics is highly desirable. Herein, we reported a facile additive manufacturing approach to fabricate porous ceramics and control the printed porosity. Several printable ceramic inks were prepared, the foaming agent was added to generate gaseous bubbles in the ink, followed by the direct ink writing and the ambient-pressure and room-temperature drying to create the three-dimensional geometries. A set of experimental studies were performed to optimize the printing quality. The results revealed the optimal process parameters for printing the foamed ceramic ink with a high spatial resolution and fine surface quality. Varying the concentration of the foaming agent enables the controllability of the structural porosity. The maximum porosity can reach 85%, with a crack-free internal porous structure. The tensile tests showed that the printed macro-porous ceramics possessed enhanced durability with the addition of fiber. With a high-fidelity 3D printing process and the precise controllability of the porosity, we showed that the printed samples exhibited a remarkably low thermal conductivity and durable mechanical strength.

Sign in / Sign up

Export Citation Format

Share Document