scholarly journals Feasibility analysis of design for remanufacturing in bearing using hybrid fuzzy-topsis and taguchi optimization

2020 ◽  
Vol 11 (1) ◽  
pp. 081 ◽  
Author(s):  
Vishal Fegade ◽  
Kshitij Shrivastava ◽  
A. V. Kale ◽  
R. L. Shrivastava
Keyword(s):  
Fuzzy Topsis ◽  
Vital Role ◽  
Raw Material ◽  
Taguchi Optimization ◽  
Taguchi Analysis ◽  
Outer Race ◽  
Roller Bearings ◽  
Design For Remanufacturing ◽  
Material Usage ◽  
The Cost

The tremendous advancement in technology, productivity and improved standard of living has come at the cost of environmental deterioration, increased energy and raw material consumption. In this regard, remanufacturing is viable option to reduce energy usage, carbon footprint and raw material usage. In this manuscript, using computational intelligence techniques we try to determine the feasibility of remanufacturing in case of roller bearings. We collected used N308 bearings from 5 different Indian cities. Using Fuzzy-TOPSIS, we found that the roundness, surface roughness and weight play a vital role in design for remanufacturing of roller bearings. Change in diameter, change in thickness and change in width showed minimal influence.  We also used Taguchi analysis to reassess the problem. The roundness of inner and outer race was found to be the most influential parameters in deciding the selection of bearing for remanufacturing. The results suggest the bearing designer to design the bearing in such a way that roundness of both races will be taken cared while manufacturing a bearing. However, using Taguchi the weight of the rollers was found to be of least influence. Overall, the predictions of Taguchi analysis were found to be similar to Fuzzy-TOPSIS analysis.

Resource efficiency in deinked pulp production: a review

TAPPI Journal ◽  
2014 ◽  
Vol 13 (11) ◽  
pp. 37-43 ◽  
Author(s):  
LIISA KOTANEN ◽  
MIKA KÖRKKÖ ◽  
ARI ÄMMÄLÄ ◽  
JOUKO NIINIMÄKI
Keyword(s):  
Waste Disposal ◽  
Resource Efficiency ◽  
Raw Material ◽  
Ecological Strategy ◽  
Recycled Paper ◽  
Paper Production ◽  
Recycled Pulp ◽  
Current State ◽  
The Cost ◽  
Pulp Production

The use of recovered paper as a raw material for paper production is by far the most economical and ecological strategy for the disposal of waste paper. However, paper production from recovered paper furnish generates a great amount of residues, and the higher the demand requirements for the end product, the higher the amount of rejected material. The reason for this is that the selectivity of the deinking process is limited; therefore, some valuable components are also lost in reject streams. The rejection of usable components affects the economics of recycled paper production. As the cost of waste disposal continues to increase, this issue is becoming more and more severe. This paper summarizes the current state of the resource efficiency in recycled pulp production and provides information on the volumes of rejected streams and the usable material within them. Various means to use these reject streams are also discussed, including the main findings of a recent thesis by the main author. This review summarizes current internal and external use of reject streams generated in the deinking operations.

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

Roller Skewing Behavior in Roller Bearings

1982 ◽  
Vol 104 (3) ◽  
pp. 311-320
Author(s):  
L. J. Nypan
Keyword(s):  
Diameter Ratio ◽  
Radial Load ◽  
Outer Race ◽  
Roller Bearings ◽  
Length To Diameter Ratio

Measurements of roller skewing of a 1.15 length to diameter ratio roller in 118 mm bore roller bearings of 0.18 and 0.21 mm (0.0073 and 0.0083 in.) clearance operating with a 4450 N (1000 lb) radial load at shaft speeds of 4000, 8000, and 12,000 rpm with outer race misalignment of 0, 0.5, and −0.5 deg are reported.

Use of Sugarcane Bagasse Ashes as Raw Material in the Replacement of Fluxes for Applications on Porcelain Tile

2016 ◽  
Vol 881 ◽  
pp. 383-386 ◽  
Author(s):  
Raimundo J.S. Paranhos ◽  
Wilson Acchar ◽  
Vamberto Monteiro Silva
Keyword(s):  
Mechanical Properties ◽  
Environmental Impact ◽  
Physical Properties ◽  
Sugarcane Bagasse ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Raw Material ◽  
The Cost ◽  
Potential Use ◽  
Porcelain Tile

This study evaluated the potential use of Sugarcane Bagasse Ashes (SBA) as a flux, replacing phyllite for the production of enamelled porcelain tile. The raw materials of the standard mass components and the SBA residue were characterized by testing by XRF, XRD, AG, DTA and TGA. Test samples were fabricated, assembled in lots of 3 units and sintered at temperatures of 1150 ° C to 1210 ° C. The results of the physical properties, mechanical properties and SEM of the sintered samples, showed that the formulation, G4 - in which applied 10% of SBA replacing phyllite, sintering temperature 1210 ° C showed better performance as the previously mentioned properties due to the formation of mullite crystals, meeting the prerequisites of standards for enamelled porcelain tile, while reducing the environmental impact and the cost of production.

scholarly journals PEMANFAATAN LIMBAH FLY ASH DARI PEMBAKARAN BATUBARA PADA PEMBUATAN SEMEN PCC (PORTLAND COMPOSITE CEMENT) DI PT SEMEN XYZ LAMPUNG

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Dwi Septiyana Sari ◽  
◽  
Susanti Sundari
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Raw Materials ◽  
Testing Machine ◽  
Technical Aspect ◽  
Raw Material ◽  
Physical Test ◽  
Composite Cement ◽  
The Difference ◽  
The Cost

Abstract This study discusses the use of fly ash waste from coal burning on the manufacture of PCC (Portland composite cement) at PT. XYZ Lampung. The purpose of this research is to look at the technical studies and the efficiency of raw materials in the use of fly ash in cement making, in this case PCC cement (Portland Composite Cement). The steps taken in analyzing the data in this study were viewed from a technical aspect by means of a physical test, namely the cement compressive strength test at the age of 3 days, 7 days, and 28 days using the Compression Testing Machine. This test was conducted to see the comparison of the compressive strength of PCC cement using limestone and fly ash as raw materials, then calculate the difference in raw material costs in the year before and after the replacement of limestone with fly ash. The results showed that cement with the addition of fly ash after 3 days, 7 days and 28 days had an increased compressive strength value, which increased 21.69%, 16.07% and 8.05% respectively of the compressive strength of cement using limestone. The use of fly ash as a substitute for limestone has an effect on the cost of raw materials, where the difference between the cost of raw materials in 2019 and the cost of raw materials in 2018 is Rp. 39,440,952,074.

scholarly journals Pemberdayaan Kelompok Tenun Nari-Nari Melalui Pewarnaan Benang Menggunakan Ekstrak Kayu Kuning Dan Kayu Mahoni

2020 ◽  
Vol 5 (2) ◽  
pp. 446-452
Author(s):  
Ruslan R ◽  
Agrippina Wiraningtyas ◽  
Ahmad Sandi ◽  
Muhammad Nasir
Keyword(s):  
Natural Dyes ◽  
Raw Material ◽  
Woven Fabric ◽  
Synthetic Dyes ◽  
Community Group ◽  
Training Stage ◽  
Red Color ◽  
Different Color ◽  
Fabric Production ◽  
The Cost

The "Nari-Nari" Weaving Village in Rabadompu Timur Village, Bima City, is a community group engaged in the weaving industry which has been carried on for generations. During this time, Bima woven fabric products use yarn raw material that has been colored using synthetic dyes. Yarn with synthetic dyes has a more diverse color, the fabric coloring process is easier and the cost is cheap, but synthetic dyes are carcinogenic and harmful to the environment. The solution to the problems faced by using natural dyes obtained from plants. This activity aims to train the Nari-Nari weaving group in yarn coloring using natural dyes. The method used is training through several stages of the activity namely the stage of socialization of activities; the training stage of yarn dyeing and woven fabric production. The dyes used are yellow wood extract and mahogany wood. The results obtained in this activity are the colored yarn has a different color based on the extract of the dye and fixation material. In yellow wood obtained with a maroon red color on alum, black on tunjung and reddish beige on lime. In mahogany wood is obtained beige on alum, black gray on tunjung and beige on lime.  

scholarly journals Importance of spindle speed in ring frame

2021 ◽  
Vol 10 (2) ◽  
pp. 85
Author(s):  
Md. Redwanul Islam ◽  
Amit Chakrabortty ◽  
Joyjit Ghosh ◽  
Tareq Iqbal ◽  
Md. Tanvir Hossen
Keyword(s):  
Production Efficiency ◽  
Vital Role ◽  
Spindle Speed ◽  
Raw Material ◽  
Maximum Efficiency ◽  
Important Thing ◽  
Maximum Production ◽  
Ring Frame ◽  
Textile Industries

In textile industries, spinning sector plays a vital role because this sector produces the main raw material for the textile industries which is known as yarn. So for getting good qualities garments, it is needed to ensure the good qualities yarn. There are many things which are re-sponsible for producing good qualities yarn. Among these spindle speed is an important thing. One must have to change the spindle speed, when he changes the count. As every count has a particular spindle speed in which the production shows maximum production efficiency. Here we used five most commonly used yarn counts in the maximum factories. The counts are 15 Ne, 20 Ne, 25 Ne, 30 Ne and 40 Ne. We analyzed these counts with different speed and found that every count showed maximum efficiency at a particular spindle speed. The out-come of this paper is applicable in all types of ring frame machine , especially for producing single carded and combed yarn.  

scholarly journals Economic analysis of the inclusion of thermoelectric ash in asphalt mixtures

2021 ◽  
Vol 10 (10) ◽  
pp. e28101018564
Author(s):  
Igor Nonato Almeida Pereira ◽  
Newton Paulo de Souza Falcão ◽  
Consuelo Alves da Frota
Keyword(s):  
Asphalt Concrete ◽  
Lower Cost ◽  
Electric Energy ◽  
Asphalt Mixtures ◽  
Raw Material ◽  
Stone Dust ◽  
Alternative Material ◽  
Good Technique ◽  
Materials Used ◽  
The Cost

The replacement of conventional materials used in hot asphalt mixtures with others of good technique and lower cost and environmental impact has motivated research in this area of knowledge in recent decades. The researches should be expanded in the scope of engineering, given that it contributes considerably to the transformation of spaces and raw material. In this context, thermoelectric ashes, which are residues from the production of electric energy, appear as an alternative to replace the stone powder input which contributes negatively to the environment considering that it comes from the blasting of rocks. This work aims to compare the cost of producing traditional asphalt concrete (reference) to asphalt compositions containing 5,15% of alternative material characterized by stone dust. There was a saving of R$ 0.21 per ton of AC machining, consisting of thermoelectric ash as a partial substitute (5.15%) for stone powder, which represents significant savings in a practical context.

scholarly journals Investigation of the process of production of crafted beer with spicy and aromatic raw materials

10.5219/1183 ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 806-814
Author(s):  
Marija Zheplinska ◽  
Mikhailo Mushtruk ◽  
Volodymyr Vasyliv ◽  
Olena Deviatko
Keyword(s):  
Cost Effectiveness ◽  
Physicochemical Parameters ◽  
Raw Materials ◽  
Scientific Work ◽  
Alcohol Concentration ◽  
Raw Material ◽  
Volumetric Fraction ◽  
Craft Beer ◽  
The Cost ◽  
Water Alcohol

This scientific work demonstrates the stages of the process of inspiring the spicy aromatic raw materials of Badian, which is added to the craft beer in the process of its digestion. In addition, the work shows an analysis of the composition of spicy aromatic raw materials which will be used as an additive. The research proves the rational quantity and concentration of alcoholic spiro-aromatic raw materials for beer and determines the effect of alcoholic spiro-aromatic raw materials on beer indices. We have clarified the organoleptic and physicochemical parameters of beer with spicy aromatic raw materials Badian and composition based on infusions of Badian and cinnamon. As a result, we received water-alcohol infusions of spicy aromatic raw materials and developed new types of beer on their basis. On the basis of the conducted studies, the regression equation of the dependence of the content of actual dry substances and the volumetric fraction of alcohol from the change in the amount of spray-aromatic raw material and alcohol concentration in the alcohol-alcoholic infusion of spin-aromatic raw materials was obtained. In addition, we conducted calculations on the cost-effectiveness of adding these types of spiced aromatic raw materials to beer.

scholarly journals PHARMACOPOEIAL AND HPTLC FINGERPRINT STUDIES OF DARCHINI – ANIMMUNITY BOOSTER UNANI SINGLE DRUG

2020 ◽  
Vol 8 (11) ◽  
pp. 245-253
Author(s):  
Meena R.P. ◽  
◽  
Khan Asim Ali ◽  
Subhani S ◽  
Mustehasan a ◽  
...  
Keyword(s):  
Virus Disease ◽  
Vital Role ◽  
Raw Material ◽  
Control Methods ◽  
Classical Literature ◽  
Plant Origin ◽  
Important Ingredient ◽  
Single Drug ◽  
Worldwide Population ◽  
Physico Chemical

Corona virus disease 2019 (COVID-19) is threatening the worldwide population by causing symptoms like fever, cough, shortness of breathand tirednessetc.A huge population of world is suffering from this disease and no specific vaccine for this pandemic disease has been developed. According to the guidelines of Ministry of AYUSH, this disease can be prevented by taking immunity boosters, as immune system plays a vital role in defence against any disease. In Unani system of medicines, many drugs of plant origin are mentioned in classical literature for strengthening and increasing the immunity of humans. Darchini is one of the potent immune boosters and it is believed that consumption of Darchini decoction with honey strengthens the immune system.The Ministry of AYUSH, Govt. of India in its Advisory has considered Darchini as one of the important ingredient of AYUSH Joshanda/ Kwath/ Kudineer.Since, the drug Darchini is being given to COVID-19 patients as prophylaxis regime, it has become necessary to authenticate and develop its pharmacopoeial standards so that quality raw material can be provided to needy mass. The present study is aimed to develop identity, purity and strength of drug using pharmacognostical, physico-chemical and quality control methods.

Sign in / Sign up

Export Citation Format

Share Document