scholarly journals Present Technologies on Motors and Drive Systems for Electric Vehicle. II. Power-train for Electric Vehicles.

1996 ◽  
Vol 116 (11) ◽  
pp. 1093-1094 ◽  
Author(s):  
Atsuo Kawamura ◽  
Hiromasa Higasa
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Power Train ◽  
Drive Systems

Electric Vehicle Improved by Three-Phase Asynchronous Cooled Motor

2013 ◽  
Author(s):  
Giuseppe Rattighieri ◽  
Michele Trancossi ◽  
Nicola Dorigo Salomon ◽  
Dean Vucinic
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
High Speed ◽  
Rotation Speed ◽  
Reggio Emilia ◽  
Heavy Load ◽  
Power Train ◽  
Electric Car ◽  
Three Phase ◽  
Cabin Interior

This paper presents the EVITA electric car. EVITA is the acronym of Electric Vehicle Improved by Three-phase Asynchronous cooled motor. It is a research project developed jointly by RGEngineering and University of Modena and Reggio Emilia. It aims to produce a novel electric power train with the capability of solving three fundamental problems of today commercial electric vehicles: 1. direct torque dependency of the rotation speed, and its reduction at high speed regimes; 2. electric motors performances reduction due to the overheating effects under heavy load conditions; 3. acclimatization of the car cabin interior in winter times.

scholarly journals Status of Pure Electric Vehicle Power Train Technology and Future Prospects

2020 ◽  
Vol 3 (3) ◽  
pp. 35 ◽  
Author(s):  
Abhisek Karki ◽  
Sudip Phuyal ◽  
Daniel Tuladhar ◽  
Subarna Basnet ◽  
Bim Prasad Shrestha
Keyword(s):  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Electric Vehicle ◽  
Electric Vehicles ◽  
Optimization Techniques ◽  
Environmental Benefits ◽  
Gas Emissions ◽  
Power Train ◽  
Transportation Sector ◽  
The World

Electric vehicles (EV) are becoming more common mobility in the transportation sector in recent times. The dependence on oil as the source of energy for passenger vehicles has economic and political implications, and the crisis will take over as the oil reserves of the world diminish. As concerns of oil depletion and security of the oil supply remain as severe as ever, and faced with the consequences of climate change due to greenhouse gas emissions from the tail pipes of vehicles, the world today is increasingly looking at alternatives to traditional road transport technologies. EVs are seen as a promising green technology which could lead to the decarbonization of the passenger vehicle fleet and to independence from oil. There are possibilities of immense environmental benefits as well, as EVs have zero tail pipe emission and therefore are capable of curbing the pollution problems created by vehicle emission in an efficient way so they can extensively reduce the greenhouse gas emissions produced by the transportation sector as pure electric vehicles are the only vehicles with zero-emission potential. However, there are some major barriers for EVs to overcome before totally replacing ICE vehicles in the transportation sector and obtain appreciable market penetration. This review evaluates the technological aspects of the different power train systems of BEV technology and highlights those technological areas where important progress is expected by focusing on reviewing all the useful information and data available on EV architecture, electrical machines, optimization techniques, and its possibilities of future developments as green mobility. The challenges of different electric drive trains’ commercialization are discussed. The major objective is to provide an overall view of the current pure electric vehicle powertrain technology and possibilities of future green vehicle development to assist in future research in this sector.

EV – Challenges In Going Electric

2018 ◽  
Author(s):  
Umanand L
Keyword(s):  
Mass Transport ◽  
Electric Vehicle ◽  
Electric Vehicles ◽  
Hybrid Electric Vehicles ◽  
Research Activity ◽  
Considerable Research ◽  
Hybrid Electric

This article presents a frank and open opinion on the challenges that will be faced in moving towards an electric mass transport ecosystem. World over there is considerable research activity on electric vehicles and hybrid electric vehicles. There seems to be a global effort to move from an ICE driven ecosystem to electric vehicle ecosystem. There is no simple means to make this transition. This road is filled with hurdles and challenges. This paper poses and discusses these challenges and possible solutions for enabling EVs.

scholarly journals Optimized Strategic Planning of Future Norwegian Low-Voltage Networks with a Genetic Algorithm Applying Empirical Electric Vehicle Charging Data

Electricity ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 91-109
Author(s):  
Julian Wruk ◽  
Kevin Cibis ◽  
Matthias Resch ◽  
Hanne Sæle ◽  
Markus Zdrallek
Keyword(s):  
Genetic Algorithm ◽  
Electric Vehicle ◽  
Electric Vehicles ◽  
Low Voltage ◽  
Network Planning ◽  
Voltage Regulation ◽  
Electric Vehicle Charging ◽  
Vehicle Charging ◽  
The Impact

This article outlines methods to facilitate the assessment of the impact of electric vehicle charging on distribution networks at planning stage and applies them to a case study. As network planning is becoming a more complex task, an approach to automated network planning that yields the optimal reinforcement strategy is outlined. Different reinforcement measures are weighted against each other in terms of technical feasibility and costs by applying a genetic algorithm. Traditional reinforcements as well as novel solutions including voltage regulation are considered. To account for electric vehicle charging, a method to determine the uptake in equivalent load is presented. For this, measured data of households and statistical data of electric vehicles are combined in a stochastic analysis to determine the simultaneity factors of household load including electric vehicle charging. The developed methods are applied to an exemplary case study with Norwegian low-voltage networks. Different penetration rates of electric vehicles on a development path until 2040 are considered.

scholarly journals The Structure and Optimal Gear Tooth Profile Design of Two-Speed Transmission for Electric Vehicles

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3736
Author(s):  
Jae-Oh Han ◽  
Won-Hyeong Jeong ◽  
Jong-Seok Lee ◽  
Se-Hoon Oh
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Automobile Industry ◽  
Bending Strength ◽  
Gear Tooth ◽  
Planetary Gear ◽  
Maximum Speed ◽  
Compact Structure ◽  
Simple Method ◽  
Paris Climate Agreement

As environmental regulations have been strengthened worldwide since the Paris Climate Agreement, the automobile industry is shifting its production paradigm to focus on eco-friendly vehicles such as electric vehicles and hydrogen-battery vehicles. Governments are banning fossil fuel vehicles by law and expanding the introduction of green vehicles. The energy efficiency of electric vehicles that use a limited power source called batteries depends on the driving environment. Applying a two-speed transmission to an electric vehicle can optimize average speed and performance efficiency at low speeds, and achieve maximum speed with minimal torque at high speeds. In this study, a two-speed transmission for an electric vehicle has been developed, to be used in a compact electric vehicle. This utilizes a planetary gear of a total of three pairs, made of a single module which was intended to enable two-speed. The ring gear was removed, and the carrier was used in common. When shifting, the energy used for the speed change is small, due to the use of the simple method of fixing the sun gear of each stage. Each gear was designed by calculating bending strength and surface durability, using JGMA standards, to secure stability. The safety factor of the gears used in the transmission is as follows: all gears have been verified for safety with a bending strength of 1.2 or higher and a surface pressure strength of 1.1 or higher. The design validity of the transmission was verified by calculating the gear meshing ratio and the reference efficiency of the gear. The transmission to be developed through the research results of this paper has a simple and compact structure optimized for electric vehicles, and has reduced shift shock. In addition, energy can be used more efficiently, which will help improve fuel economy and increase drive range.

scholarly journals Objective Rating of the Launch Behavior of Conventional, Hybrid and Electric Vehicles

2021 ◽  
Author(s):  
Christian Dorsch ◽  
Xiao Wang ◽  
Ferit Küçükay
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Hybrid Electric Vehicle ◽  
Automatic Transmission ◽  
Major Influence ◽  
Important Process ◽  
Dual Clutch Transmission ◽  
Conventional Vehicle ◽  
Objective Rating ◽  
Dynamic Quality

AbstractThe calibration of conventional, hybrid and electric drivetrains is an important process during the development phase of any vehicle. Therefore, to optimize the comfort and dynamic behavior (known as driveability), many test drives are performed by experienced drivers during different driving maneuvers, e.g., launch, re-launch or gear shift. However, the process can be kept more consistent and independent of human-based deviations by using objective ratings. This study first introduces an objective rating system developed for the launch behavior of conventional vehicles with automatic transmission, dual-clutch transmission, and alternative drivetrains. Then, the launch behavior, namely comfort and dynamic quality, is compared between two conventional vehicles, a plug-in hybrid electric vehicle and a battery electric vehicle. Results show the benefits of pure electric drivetrains due to the lack of launch and shifting elements, as well as the usage of a highly dynamic electric motor. While the plug-in hybrid achieves a 10% higher overall rating compared to the baseline conventional vehicle, the pure electric vehicle even achieves a 21% higher overall rating. The results also highlight the optimization potential of battery electric vehicles regarding their comfort and dynamic characteristics. The transitions and the gradient of the acceleration build-up have a major influence on the launch quality.

scholarly journals Energy Management System Optimization of Drug Store Electric Vehicles Charging Station Operation

2021 ◽  
Vol 13 (11) ◽  
pp. 6163
Author(s):  
Yongyi Huang ◽  
Atsushi Yona ◽  
Hiroshi Takahashi ◽  
Ashraf Mohamed Hemeida ◽  
Paras Mandal ◽  
...  
Keyword(s):  
Power Generation ◽  
Electric Vehicle ◽  
Electric Vehicles ◽  
System Optimization ◽  
Mixed Integer ◽  
Charging Station ◽  
Electric Vehicle Charging ◽  
Photovoltaic Power ◽  
Vehicle Charging ◽  
Charging Stations

Electric vehicle charging station have become an urgent need in many communities around the world, due to the increase of using electric vehicles over conventional vehicles. In addition, establishment of charging stations, and the grid impact of household photovoltaic power generation would reduce the feed-in tariff. These two factors are considered to propose setting up charging stations at convenience stores, which would enable the electric energy to be shared between locations. Charging stations could collect excess photovoltaic energy from homes and market it to electric vehicles. This article examines vehicle travel time, basic household energy demand, and the electricity consumption status of Okinawa city as a whole to model the operation of an electric vehicle charging station for a year. The entire program is optimized using MATLAB mixed integer linear programming (MILP) toolbox. The findings demonstrate that a profit could be achieved under the principle of ensuring the charging station’s stable service. Household photovoltaic power generation and electric vehicles are highly dependent on energy sharing between regions. The convenience store charging station service strategy suggested gives a solution to the future issues.

scholarly journals An Optimal Control Algorithm with Reduced DC-Bus Current Fluctuation for Multiple Charging Modes of Electric Vehicle Charging Station

2021 ◽  
Vol 12 (3) ◽  
pp. 107
Author(s):  
Tao Chen ◽  
Peng Fu ◽  
Xiaojiao Chen ◽  
Sheng Dou ◽  
Liansheng Huang ◽  
...  
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Control Algorithm ◽  
Current Fluctuation ◽  
Charging Station ◽  
Electric Vehicle Charging ◽  
Three Phase ◽  
Optimization Control ◽  
Dc Bus ◽  
Vehicle Charging

This paper presents a systematic structure and a control strategy for the electric vehicle charging station. The system uses a three-phase three-level neutral point clamped (NPC) rectifier to drive multiple three-phase three-level NPC converters to provide electric energy for electric vehicles. This topology can realize the single-phase AC mode, three-phase AC mode, and DC mode by adding some switches to meet different charging requirements. In the case of multiple electric vehicles charging simultaneously, a system optimization control algorithm is adopted to minimize DC-bus current fluctuation by analyzing and reconstructing the DC-bus current in various charging modes. This algorithm uses the genetic algorithm (ga) as the core of computing and reduces the number of change parameter variables within a limited range. The DC-bus current fluctuation is still minimal. The charging station system structure and the proposed system-level optimization control algorithm can improve the DC-side current stability through model calculation and simulation verification.

A Feedback Control Strategy for Torque-Vectoring of IWM Vehicles

2014 ◽  
Author(s):  
Francesco Braghin ◽  
Edoardo Sabbioni ◽  
Gabriele Sironi ◽  
Michele Vignati
Keyword(s):  
Electric Vehicles ◽  
Automotive Industry ◽  
Control Strategy ◽  
Control Logic ◽  
Power Train ◽  
Vehicle Handling ◽  
Torque Vectoring ◽  
Feedback Control Strategy ◽  
Object Of Study ◽  
Yaw Moment

In last decades hybrid and electric vehicles have been one of the main object of study for automotive industry. Among the different layout of the electric power-train, four in-wheel motors appear to be one of the most attractive. This configuration in fact has several advantages in terms of inner room increase and mass distribution. Furthermore the possibility of independently distribute braking and driving torques on the wheels allows to generate a yaw moment able to improve vehicle handling (torque vectoring). In this paper a torque vectoring control strategy for an electric vehicle with four in-wheel motors is presented. The control strategy is constituted of a steady-state contribution to enhance vehicle handling performances and a transient contribution to increase vehicle lateral stability during limit manoeuvres. Performances of the control logic are evaluated by means of numerical simulations of open and closed loop manoeuvres. Robustness to friction coefficient changes is analysed.

Sign in / Sign up

Export Citation Format

Share Document