Patterned Deposition of Nanoparticles Using Dip Pen Nanolithography For Synthesis of Carbon Nanotubes

2015 ◽  
Vol 1752 ◽  
pp. 65-70
Author(s):  
Kevin F. Dahlberg ◽  
Kelly Woods ◽  
Carol Jenkins ◽  
Christine C. Broadbridge ◽  
Todd C. Schwendemann
Keyword(s):  
Chemical Vapor ◽  
Growth Conditions ◽  
Direct Write ◽  
Patterned Substrate ◽  
Nanoparticle Catalysts ◽  
Analysis Process ◽  
Nucleation Sites ◽  
Wide Range ◽  
Synthesis Of Carbon Nanotubes ◽  
Dip Pen Nanolithography

AbstractOrdered carbon nanotube (CNT) growth by deposition of nanoparticle catalysts using dip pen nanolithography (DPN) is presented. DPN is a direct write, tip based lithography technique capable of multi-component deposition of a wide range of materials with nanometer precision. A NanoInk NLP 2000 is used to pattern different catalytic nanoparticle solutions on various substrates. To generate a uniform pattern of nanoparticle clusters, various conditions need to be considered. These parameters include: the humidity in the vessel, temperature, and tip-surface dwell time. By patterning different nanoparticle solutions next to each other, identical growth conditions can be compared for different catalysts in a streamlined analysis process. Fe, Ni, and Co nanoparticle solutions patterned on silicon, mica, and graphite substrates serve as nucleation sites for CNT growth. The CNTs were synthesized by a chemical vapor deposition (CVD) reaction. Each nanoparticle patterned substrate is placed in a tube furnace held at 725°C during CNT growth. The carbon source used in the growth chamber is toluene. The toluene is injected at a rate of 5 mL/hr. Growth is observed for Fe and Ni nanoparticle patterns, but is lacking for the Co patterns. The results of these reactions provide important information regarding efficient and highly reproducible mechanisms for CNT growth.

A Nucleation Study of GaN Multifunctional Nanostructures

2004 ◽  
Vol 831 ◽  
Author(s):  
Gupta Shalini ◽  
Kang Hun ◽  
Strassburg Martin ◽  
Asghar Ali ◽  
Senawiratne Jayantha ◽  
...  
Keyword(s):  
Chemical Vapor ◽  
Optimal Growth ◽  
Growth Conditions ◽  
Organic Chemical ◽  
Mocvd Growth ◽  
Aspect Ratios ◽  
Nucleation Sites ◽  
Wide Range ◽  
Metal Organic ◽  
Multifunctional Nanostructures

ABSTRACTThis paper reports the Metal Organic Chemical Vapor Deposition (MOCVD) growth of GaN nanostructures. The use of MOCVD allows the direct integration of these nanostructures into pre-existing device technology. The formation of GaN nanostructures grown on AlN epitaxial layers were studied as a function of growth temperature, growth rate, V-III ratio and the amount of deposited material. A wide range of temperatures from 800 °C to 1100 °C and V-III ratios from 30 to 3500 were applied to determine the optimal growth conditions for nucleation studies in a modified production reactor. Small GaN nanostructures with lateral dimensions below 50 nm and low aspect ratios were obtained using relatively low temperatures of 815 °C and extreme metal-rich growth conditions. Island densities up to 1010 cm−2 were achieved using silane as an anti-surfactant to increase the available nucleation sites. Manganese has been incorporated into these nanostructures to enhance the multifunctional ferromagnetic properties of GaMnN.

scholarly journals Efficient Visible-Light Photocatalysis of TiO2-δ Nanobelts Utilizing Self-Induced Defects and Carbon Doping

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1377
Author(s):  
Dong-Bum Seo ◽  
Sung-Su Bae ◽  
Eui-Tae Kim
Keyword(s):  
Visible Light ◽  
Surface States ◽  
Chemical Vapor ◽  
Growth Conditions ◽  
Carbon Doping ◽  
Organic Chemical ◽  
Visible Light Photocatalysis ◽  
Defect States ◽  
High Concentration ◽  
Wide Range

Efficient visible-light photocatalysis was realized by exploring self-induced defect states, including the abundant surface states of TiO2-δ nanobelts synthesized through metal–organic chemical vapor deposition (MOCVD). The TiO2-δ nanobelts exhibited two strong defect-induced absorption peaks at 2.91 and 1.92 eV, overlapping with the conduction band states so that photoexcited carriers can contribute effectively for the photocatalysis reaction. To further enhance visible-light photocatalytic activity, carbon atoms, the by-product of the MOCVD reaction, were self-doped at the judiciously determined growth conditions. The resulting visible-light photocatalysis suggests that the large surface area and consequent high concentration of the surface states of the TiO2-δ nanobelts can be effectively utilized in a wide range of photocatalysis applications.

Structural and electronic properties of defects in semiconductors

1995 ◽  
Vol 53 ◽  
pp. 4-5
Author(s):  
J.L. Batstone
Keyword(s):  
Semiconductor Device ◽  
Chemical Vapor ◽  
Misfit Strain ◽  
Organic Chemical ◽  
Extended Defects ◽  
Transmission Electron ◽  
Semiconductor Thin Films ◽  
Wide Range ◽  
Metal Organic ◽  
Film Substrate

The development of growth techniques such as metal organic chemical vapor deposition (MOCVD) and molecular beam epitaxy during the last fifteen years has resulted in the growth of high quality epitaxial semiconductor thin films for the semiconductor device industry. The III-V and II-VI semiconductors exhibit a wide range of fundamental band gap energies, enabling the fabrication of sophisticated optoelectronic devices such as lasers and electroluminescent displays. However, the radiative efficiency of such devices is strongly affected by the presence of optically and electrically active defects within the epitaxial layer; thus an understanding of factors influencing the defect densities is required.Extended defects such as dislocations, twins, stacking faults and grain boundaries can occur during epitaxial growth to relieve the misfit strain that builds up. Such defects can nucleate either at surfaces or thin film/substrate interfaces and the growth and nucleation events can be determined by in situ transmission electron microscopy (TEM).

TEM study of very thin InGaAsP layers grown by liquid-phase epitaxy

1990 ◽  
Vol 48 (4) ◽  
pp. 672-673
Author(s):  
N.A. Bert ◽  
A.O. Kosogov
Keyword(s):  
Liquid Phase ◽  
Liquid Phase Epitaxy ◽  
Chemical Vapor ◽  
Growth Conditions ◽  
Dark Field ◽  
Organic Chemical ◽  
Simple Liquid ◽  
Cross Sectional ◽  
Conventional Procedure ◽  
Double Heterostructures

The very thin (<100 Å) InGaAsP layers were grown not only by molecular beam epitaxy and metal-organic chemical vapor deposition but recently also by simple liquid phase epitaxy (LPE) technique. Characterization of their thickness, interfase abruptness and lattice defects is important and requires TEM methods to be used.The samples were InGaAsP/InGaP double heterostructures grown on (111)A GaAs substrate. The exact growth conditions are described in Ref.1. The salient points are that the quarternary layers were being grown at 750°C during a fast movement of substrate and a convection caused in the melt by that movement was eliminated. TEM cross-section specimens were prepared by means of conventional procedure. The studies were conducted in EM 420T and JEM 4000EX instruments.The (200) dark-field cross-sectional imaging is the most appropriate TEM technique to distinguish between individual layers in 111-v semiconductor heterostructures.

scholarly journals Relationship between the Stereocomplex Crystallization Behavior and Mechanical Properties of PLLA/PDLA Blends

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1851
Author(s):  
Hye-Seon Park ◽  
Chang-Kook Hong
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Crystallization Behavior ◽  
Mechanical Analysis ◽  
X Ray Diffraction ◽  
Nucleation Agent ◽  
Scanning Calorimetry ◽  
Nucleation Sites ◽  
Wide Range ◽  
Degree Of Crystallization

Poly (l-lactic acid) (PLLA) is a promising biomedical polymer material with a wide range of applications. The diverse enantiomeric forms of PLLA provide great opportunities for thermal and mechanical enhancement through stereocomplex formation. The addition of poly (d-lactic acid) (PDLA) as a nucleation agent and the formation of stereocomplex crystallization (SC) have been proven to be an effective method to improve the crystallization and mechanical properties of the PLLA. In this study, PLLA was blended with different amounts of PDLA through a melt blending process and their properties were calculated. The effect of the PDLA on the crystallization behavior, thermal, and mechanical properties of PLLA were investigated systematically by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), polarized optical microscopy (POM), dynamic mechanical analysis (DMA), and tensile test. Based on our findings, SC formed easily when PDLA content was increased, and acts as nucleation sites. Both SC and homo crystals (HC) were observed in the PLLA/PDLA blends. As the content of PDLA increased, the degree of crystallization increased, and the mechanical strength also increased.

Glycans in scaffold design in tissue reconstruction

2021 ◽  
pp. 088391152199784
Author(s):  
Nipun Jain ◽  
Shashi Singh
Keyword(s):  
Cell Attachment ◽  
Low Cost ◽  
Growth Conditions ◽  
Downstream Signaling ◽  
Cell Carrier ◽  
Wide Range ◽  
Proliferation And Differentiation ◽  
Different Types ◽  
Tissue Reconstruction ◽  
A Cell

Development of an artificial tissue by tissue engineering is witnessed to be one of the long lasting clarified solutions for the damaged tissue function restoration. To accomplish this, a scaffold is designed as a cell carrier in which the extracellular matrix (ECM) performs a prominent task of controlling the inoculated cell’s destiny. ECM composition, topography and mechanical properties lead to different types of interactions between cells and ECM components that trigger an assortment of cellular reactions via diverse sensing mechanisms and downstream signaling pathways. The polysaccharides in the form of proteoglycans and glycoproteins yield better outcomes when included in the designed matrices. Glycosaminoglycan (GAG) chains present on proteoglycans show a wide range of operations such as sequestering of critical effector morphogens which encourage proficient nutrient contribution toward the growing stem cells for their development and endurance. In this review we discuss how the glycosylation aspects are of considerable importance in everyday housekeeping functions of a cell especially when placed in a controlled environment under ideal growth conditions. Hydrogels made from these GAG chains have been used extensively as a resorbable material that mimics the natural ECM functions for an efficient control over cell attachment, permeability, viability, proliferation, and differentiation processes. Also the incorporation of non-mammalian polysaccharides can elicit specific receptor responses which authorize the creation of numerous vigorous frameworks while prolonging the low cost and immunogenicity of the substance.

Growth of GaN without Yellow Luminescence

1995 ◽  
Vol 395 ◽  
Author(s):  
X. Zhang ◽  
P. Kung ◽  
D. Walker ◽  
A. Saxler ◽  
M. Razeghi
Keyword(s):  
Vapor Deposition ◽  
Metalorganic Chemical Vapor Deposition ◽  
Deep Level ◽  
Chemical Vapor ◽  
Growth Conditions ◽  
Native Defect ◽  
Yellow Luminescence ◽  
Gallium Vacancy ◽  
Rich Condition

ABSTRACTWe report the growth and photoluminescence characterization of GaN grown on different substrates and under different growth conditions using metalorganic chemical vapor deposition. The deep-level yellow luminescence centered at around 2.2eV is attributed to native defect, most possibly the gallium vacancy. The yellow luminescence can be substantially reduced By growing GaN under Ga-rich condition or doping GaN with Ge or Mg.

Observations on the Growth of YBa2Cu3O7 Thin Films at Very High Laser Fluences

1995 ◽  
Vol 388 ◽  
Author(s):  
Rand R. Biggers. ◽  
M. Grant Norton ◽  
I. Maartense ◽  
T.L. Peterson ◽  
E. K. Moser ◽  
...  
Keyword(s):  
Thin Films ◽  
Substrate Surface ◽  
Chemical Vapor ◽  
Growth Conditions ◽  
Organic Chemical ◽  
High Fluences ◽  
Laser Fluences ◽  
High Laser ◽  
High Laser Fluences ◽  
Very High

AbstractThe pulsed-laser deposition (PLD) technique utilizes one of the most energetic beams available to form thin films of the superconducting oxide YBa2Cu3O7 (YBCO). IN this study we examine the growth of YBCO at very high laser fluences (25 to 40 J/cm2); a more typical fluence for PLD would be nearer to 3 J/cm2. the use of high fluences leads to unique film microstructures which, in some cases, appear to be related to the correspondingly higher moveabilities of the adatoms. Films grown on vicinal substrates, using high laser fluences, exhibited well-defined elongated granular morphologies (with excellent transition temperature, Tc, and critical current density, Jc). Films grown on vicinal substrates using off-axis magnetron sputtering, plasma-enhanced metal organic chemical vapor deposition (PE-MOCVD), or PLD at more typical laser fluences showed some similar morphologies, but less well-defined. Under certain growth conditions, using high laser fluences with (001) oriented substrates, the YBCO films can exhibit a mixture of a- and c-axis growth where both crystallographic orientations nucleate on the substrate surface at the same time, and grow in concert. the ratio of a-axis oriented to c-axis oriented grains is strongly affected by the pulse repetition rate of the laser.

Sign in / Sign up

Export Citation Format

Share Document