Mechanical Properties of Indium Tin Oxide on Polyethylene Napthalate Substrate

2007 ◽  
Vol 1012 ◽  
Author(s):  
Shekhar Bhagat ◽  
Y. Zoo ◽  
H. Han ◽  
J. Lewis ◽  
S. Grego ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Substrate Temperature ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Mechanical Performance ◽  
High Substrate Temperature ◽  
Process Conditions ◽  
Processing Conditions ◽  
Rf Power ◽  
The Impact

AbstractThis work investigates the mechanical properties of ITO on PEN substrates as a function of processing conditions, including rf power, substrate temperature, and substrate treatment. The best mechanical performance is obtained from high substrate temperature and low rf power. Plasma treatment gases also influence mechanical properties, with mixture of nitrogen and hydrogen gases producing the best results. This work provides an initial understanding of the impact of sputter process conditions on film's mechanical performance.

Effect of toughened polyamide-coated carbon fiber fabric on the mechanical performance and fracture toughness of CFRP

2021 ◽  
pp. 002199832199945
Author(s):  
Jong H Eun ◽  
Bo K Choi ◽  
Sun M Sung ◽  
Min S Kim ◽  
Joon S Lee
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Photoelectron Spectroscopy ◽  
Mechanical Performance ◽  
Epoxy Composites ◽  
Scanning Calorimetry ◽  
Internal Damage ◽  
Impact Tests ◽  
Flexural Tests ◽  
The Impact

In this study, carbon/epoxy composites were manufactured by coating with a polyamide at different weight percentages (5 wt.%, 10 wt.%, 15 wt.%, and 20 wt.%) to improve their impact resistance and fracture toughness. The chemical reaction between the polyamide and epoxy resin were examined by fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray photoelectron spectroscopy. The mechanical properties and fracture toughness of the carbon/epoxy composites were analyzed. The mechanical properties of the carbon/epoxy composites, such as transverse flexural tests, longitudinal flexural tests, and impact tests, were investigated. After the impact tests, an ultrasonic C-scan was performed to reveal the internal damage area. The interlaminar fracture toughness of the carbon/epoxy composites was measured using a mode I test. The critical energy release rates were increased by 77% compared to the virgin carbon/epoxy composites. The surface morphology of the fractured surface was observed. The toughening mechanism of the carbon/epoxy composites was suggested based on the confirmed experimental data.

Effect of Tin Oxide Coatings by Spray Pyrolysis Process on Mechanical Properties of Aluminium, Brass and Mild Steel

2021 ◽  
Vol 13 (2) ◽  
Author(s):  
M. Shunmugasundaram ◽  
A. Praveenkumar ◽  
L. Ponraj Sankar ◽  
S. Sivasankar
Keyword(s):  
Mechanical Properties ◽  
Mild Steel ◽  
Substrate Temperature ◽  
Spray Pyrolysis ◽  
Tin Oxide ◽  
Microstructural Analysis ◽  
Solution Concentration ◽  
Solution Flow Rate ◽  
Spray Pyrolysis Method ◽  
Solution Flow

Mechanical properties of materials are enhanced by different methods to increase the usage of the materials. In this research spray pyrolysis method is employed to increase the mechanical characteristics of three different materials. The tin oxide is chosen as coated material and aluminium, brass, mild steel are selected as substrate materials. The 500nm thin film is developed over the substrate materials by spray pyrolysis. The substrate temperature are chosen as 300? C for aluminium, 400? C for brass and mildsteel. Nozzle to substrate distance is 0.4 m, substrate temperature is 300? C for aluminium and 400? C for solution concentration as 0.2 mole and solution flow rate is 1ml/min are selected for constant deposition parameters. The hardness and tensile strength result clearly shows that strength is increased by adding the coating over the surface. The material is heated above crystallization temperature and SnO2 increases the tensile and hardness strength of the materials. The triangular metrological microscope is used to examine the microstructure of non coated and coated substrate materials. The microstructural analysis is showed that the uncoated surface of the substrate material is full of rough and pores. And displays that the tin oxide coated surface of the substrates after the initial deposition disclosed a surface with a agglomeration of tin oxide in homogeneous and uniform than the uncoated substrates.

Microstructure and Electrical Properties of ITO Films Deposited Using Various ITO Targets by Magnetron Sputtering

2007 ◽  
Vol 124-126 ◽  
pp. 431-434
Author(s):  
Joon Hong Park ◽  
Sang Chul Lee ◽  
Jin Ho Lee ◽  
Pung Keun Song
Keyword(s):  
Magnetron Sputtering ◽  
Substrate Temperature ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Target Surface ◽  
Flow Ratio ◽  
Dc Power ◽  
Alkali Glass ◽  
Oxygen Ratio ◽  
Ito Films

Indium Tin Oxide (ITO) films were deposited on non-alkali glass substrate by magnetron sputtering using commercial ITO target (target A) and improved ITO target (target B). Depositions were carried out at total gas pressure (Ptot) of 0.5 Pa, substrate temperature (Ts) of RT ~ 300 °C, oxygen flow ratio [O2/(O2+Ar)] of 0 ~ 1.0% and dc power of 100W. Target B showed relatively higher stability in film resistivity with increasing sputtering time, i.e., erosion ratio of target surface. Optimum oxygen ratio to obtain the lowest resistivity was decreased with increasing substrate temperature. The lowest resistivity was 1.06x10-4 6cm for the film deposited using target B at O2/(O2+Ar) ratio of 0.05% and at Ts =300 °C.

The impact of indium tin oxide deposition and post annealing on the passivation property of TOPCon solar cells

Solar Energy ◽  
2018 ◽  
Vol 176 ◽  
pp. 241-247 ◽  
Author(s):  
Ke Tao ◽  
Shuai Jiang ◽  
Rui Jia ◽  
Ying Zhou ◽  
Pengfei Zhang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Post Annealing ◽  
Oxide Deposition ◽  
The Impact

Properties of Indium Tin Oxide Films Prepared by Two-Targets Magnetron Sputtering

2014 ◽  
Vol 997 ◽  
pp. 337-340
Author(s):  
Jian Guo Chai
Keyword(s):  
Magnetron Sputtering ◽  
Substrate Temperature ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Optical Transmittance ◽  
Visible Range ◽  
Glass Substrates ◽  
Optimized Conditions ◽  
Tin Oxide Films ◽  
Ito Films

Indium tin oxide (ITO) films were deposited on glass substrates by magnetron sputtering. Properties of ITO films showed a dependence on substrate temperature. With an increasing in substrate temperature, the intensity of XRD peak increased and the grain size showed an evident increasing. The results show that increasing substrate temperature remarkably improves the characteristics of the films. The sheet resistance of 10 Ω/sq and the maximum optical transmittance of 90% in the visible range with optimized conditions can be achicved. The results of experiment demonstrate that high-quality films have been achieved by this technique.

Manufacture of Ultra-Dense Knitted Superelastic Structures

2018 ◽  
Author(s):  
Henry Koon ◽  
Jack Laven ◽  
Julianna Abel
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Cell Structure ◽  
Axial Loading ◽  
Consumer Products ◽  
Niti Shape Memory Alloy ◽  
Structural Element ◽  
Loading Tests ◽  
Structural Architecture ◽  
The Impact

Knitted Textiles made from Nickel-Titanium (NiTi) shape memory alloy wires are a new structural element with enhanced properties for a variety of applications. Potential advantages of this structural form include enhanced bending flexibility, tailorable in-plane, and through-thickness mechanical performance, and energy absorption and damping. Inspection of the knit pattern reveals a repeating cell structure of interlocking loops. Because of this repeating structure, knits can be evaluated as cellular structures that leverage their loop-based architecture for mechanical robustness and flexibility. The flexibility and robustness of the structure can be further enhanced by manufacturing with superelastic NiTi. The stiffness of superelastic NiTi, however, makes traditional knit manufacturing techniques inadequate, so knit manufacturing in this research is aided by shape setting the superelastic wire to a predefined pattern mimicking the natural curve of a strand within a knit fabric. This predefined shape-set geometry determines the outcome of the knit’s mechanical performance and tunes the mechanical properties. In this research, the impact of the shape setting process on the material itself is explored through axial loading tests to quantify the effect that heat treatment has on a knit sample. A means of continuously shape setting and feeding the wire into traditional knitting machines is described. These processes lend themselves to mass production and build upon previous textile manufacturing technologies. This research also proposes an empirical exploration of superelastic NiTi knit mechanical performance and several new techniques for manufacturing such knits with adjustable knit parameters. Displacement-controlled axial loading tests in the vertical (wale) direction determined the recoverability of each knit sample in the research and were iteratively increased until failure resulted. Knit samples showed recoverable axial strains of 65–140%, which could be moderately altered based on knit pattern and loop parameters. Furthermore, this research demonstrates that improving the density of the knit increases the stiffness of the knit without any loss in recoverable strains. These results highlight the potential of this unique structural architecture that could be used to design fabrics with adjustable mechanical properties, expanding the design space for aerospace structures, medical devices, and consumer products.

scholarly journals Effect of Submicron Glass Fiber Modification on Mechanical Properties of Short Carbon Fiber Reinforced Polymer Composite with Different Fiber Length

2020 ◽  
Vol 4 (1) ◽  
pp. 5
Author(s):  
Nhan Thi Thanh Nguyen ◽  
Obunai Kiyotaka ◽  
Okubo Kazuya ◽  
Fujii Toru ◽  
Shibata Ou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Glass Fiber ◽  
Fiber Length ◽  
Bending Strength ◽  
Mechanical Performance ◽  
Volume Fraction ◽  
Fiber Concentration ◽  
Static Tests ◽  
The Impact

In this research, three kinds of carbon fiber (CF) with lengths of 1, 3, and 25 mm were prepared for processing composite. The effect of submicron glass fiber addition (sGF) on mechanical properties of composites with different CF lengths was investigated and compared throughout static tests (i.e., bending, tensile, and impact), as well as the tension-tension fatigue test. The strengths of composites increased with the increase of CF length. However, there was a significant improvement when the fiber length changed from 1 to 3 mm. The mechanical performance of 3 and 25 mm was almost the same when having an equal volume fraction, except for the impact resistance. Comparing the static strengths when varying the sGF content, an improvement of bending strength was confirmed when sGF was added into 1 mm composite due to toughened matrix. However, when longer fiber was used and fiber concentration was high, mechanical properties of composite were almost dependent on the CF. Therefore, the modification effect of matrix due to sGF addition disappeared. In contrast to the static strengths, the fatigue durability of composites increased proportionally to the content of glass fiber in the matrix, regardless to CF length.

scholarly journals Mechanical Performance of Unstitched and Silk Fiber-Stitched Woven Kenaf Fiber-Reinforced Epoxy Composites

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4801
Author(s):  
Yasir Khaleel Kirmasha ◽  
Mohaiman J. Sharba ◽  
Zulkiflle Leman ◽  
Mohamed Thariq Hameed Sultan
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Mechanical Performance ◽  
Mechanical Test ◽  
Natural Fibers ◽  
Silk Fiber ◽  
Epoxy Composites ◽  
Test Results ◽  
The Impact ◽  
Woven Kenaf

Fiber composites are known to have poor through-thickness mechanical properties due to the absence of a Z-direction binder. This issue is more critical with the use of natural fibers due to their low strength compared to synthetic fibers. Stitching is a through-thickness toughening method that is used to introduce fibers in the Z-direction, which will result in better through-thickness mechanical properties. This research was carried out to determine the mechanical properties of unstitched and silk fiber-stitched woven kenaf-reinforced epoxy composites. The woven kenaf mat was stitched with silk fiber using a commercial sewing machine. The specimens were fabricated using a hand lay-up method. Three specimens were fabricated, one unstitched and two silk-stitched with deferent stitching orientations. The results show that the stitched specimens have comparable in-plane mechanical properties to the unstitched specimens. For the tensile mechanical test, stitched specimens show similar and 17.1% higher tensile strength compared to the unstitched specimens. The flexural mechanical test results show around a 9% decrease in the flexural strength for the stitched specimens. On the other hand, the Izod impact mechanical test results show a significant improvement of 33% for the stitched specimens, which means that stitching has successfully improved the out-of-plane mechanical properties. The outcome of this research indicates that the stitched specimens have better mechanical performance compared to the unstitched specimens and that the decrease in the flexural strength is insignificant in contrast with the remarkable enhancement in the impact strength.

RF-Sputtered MoS2 Film Morphology and the Imperfection Nucleation Model

2003 ◽  
Vol 10 (02n03) ◽  
pp. 443-448 ◽  
Author(s):  
G. Jakovidis ◽  
I. M. Jamieson ◽  
A. Singh
Keyword(s):  
Substrate Temperature ◽  
Film Formation ◽  
High Substrate Temperature ◽  
Film Morphology ◽  
Type Ii ◽  
Rf Power ◽  
Oriented Films ◽  
Nucleation Model ◽  
Mos2 Film ◽  
First Time

RF-sputtered MoS2 films revealing the characteristics of bulk type II orientation on GaAs are reported for the first time. It is found that RF power and temperature have a pronounced effect on film morphology. Type II bulk-oriented films are obtained with a combination of low RF power and high substrate temperature. The results on GaAs are successfully interpreted within the context of an extension to the imperfection nucleation model of film formation. Films deposited on glass display an unusual morphology consisting of two distinct phases. Such phases may be related to the presence of sodium in the glass that leads to chemical texturing via a sodium thio-molybdate phase.

Sign in / Sign up

Export Citation Format

Share Document