EPR of Cu(II) in Sol-Gel Prepared SiO2 Glass

1986 ◽  
Vol 73 ◽  
Author(s):  
S. Dave ◽  
R. K. Maccrone
Keyword(s):  
Local Structure ◽  
Copper Ions ◽  
Sol Gel ◽  
Epr Spectra ◽  
Sio2 Glass ◽  
Structural Probe ◽  
Hydrolysis Of

ABSTRACTSiO2 glass has been prepared by the hydrolysis of TEOS in alcohol using HCl and NH4OH to control the pH. Copper ions were incorporated from the acetate to act as structural probe ions during the process of gellation and calcination. The local structure of copper ions was investigated using EPR determined at 300 K and 10 K.It was found that the pH of the solution had a profound effect on the EPR spectra of the copper in the gels and glasses, indicating differences in the local structure.

LOCAL STRUCTURE CHARACTERIZATION OF GADOLINIUM DOPED AMORPHOUS AND CRYSTALLINE ALUMINA

2001 ◽  
Vol 15 (12n13) ◽  
pp. 375-384 ◽  
Author(s):  
S. SIMON
Keyword(s):  
Electron Paramagnetic Resonance ◽  
Local Structure ◽  
Sol Gel ◽  
Structure Characterization ◽  
Epr Spectra ◽  
Paramagnetic Resonance ◽  
Amorphous Alumina ◽  
Electron Paramagnetic ◽  
Crystalline Alumina

The evolution of local structure during the transition from amorphous to crystalline states of gadolinium doped alumina is characterized by electron paramagnetic resonance (EPR). The EPR spectra of samples belonging to the (1 - x) Al 2 O 3x Gd 2 O 3 system, where x = 0.002, 0.01, 0.05 and 0.1, show that the gadolinium ions are relatively uniformly distributed in amorphous alumina granules prepared by sol–gel methods. First, gadolinium doped α-alumina appears on the surface of the γ-alumina granules where there are low coordinated (N < 6) gadolinium species. The transition from γ- to α-alumina is postponed by the presence of high coordinated gadolinium (N < 6) ions inside of γ-alumina granules.

scholarly journals The Study of Magnetic Properties for Non-Magnetic Ions Doped BiFeO3

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4061
Author(s):  
Yongtao Li ◽  
Liqing Liu ◽  
Dehao Wang ◽  
Hongguang Zhang ◽  
Xuemin He ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Local Structure ◽  
Metal Ion ◽  
Single Phase ◽  
Sol Gel ◽  
X Ray ◽  
Co Doping ◽  
Magnetic Ions ◽  
X Ray Absorption ◽  
Fe Ions

BiFeO3 is considered as a single phase multiferroic. However, its magnetism is very weak. We study the magnetic properties of BiFeO3 by Cu and (Cu, Zn). Polycrystalline samples Bi(Fe0.95Cu0.05)O3 and BiFe0.95(Zn0.025Cu0.025)O3 are prepared by the sol-gel method. The magnetic properties of BiFe0.95(Zn0.025Cu0.025)O3 are greater than that of BiFeO3 and Bi(Fe0.95Cu0.05)O3. The analyses of X-ray absorption fine structure data show that the doped Cu atoms well occupy the sites of the Fe atoms. X-ray absorption near edge spectra data confirm that the valence state of Fe ions does not change. Cu and Zn metal ion co-doping has no impact on the local structure of the Fe and Bi atoms. The modification of magnetism by doping Zn can be understood by the view of the occupation site of non-magnetically active Zn2+.

Effect of Al3+ on the photoluminescence properties of Ni2+-doped sol–gel SiO2 glass

2003 ◽  
Vol 6 (5) ◽  
pp. 523-526 ◽  
Author(s):  
Chun Feng Song ◽  
Meng Kai Lü ◽  
Feng Gu ◽  
Su Wen Liu ◽  
Shu Fen Wang ◽  
...  
Keyword(s):  
Sol Gel ◽  
Photoluminescence Properties ◽  
Sio2 Glass

Synthesis of Hollow Titania Photocatalytic Particles Using Yeast as Templates

2013 ◽  
Vol 699 ◽  
pp. 126-132 ◽  
Author(s):  
Toshiyuki Nomura ◽  
Syota Tanii ◽  
Hayato Tokumoto ◽  
Yasuhiro Konishi
Keyword(s):  
Pore Diameter ◽  
Sol Gel ◽  
Solid Particles ◽  
Core Shell ◽  
Average Pore ◽  
Inorganic Particles ◽  
Sol Gel Process ◽  
Yeast Powder ◽  
Titania Precursor ◽  
Hydrolysis Of

Hollow inorganic particles have attracted considerable interest for a variety of applications. In this work, yeast powder was used as a bio-template to fabricate yeast/titania core-shell spheres. A titania precursor was deposited via the hydrolysis of tetraisopropyl titanate. Triethanolamine was employed to control the reaction rate of the sol-gel process. The hollow titania particles with a diameter of approximately 4 m and a thickness of approximately 54 nm were successfully obtained after calcination of the core-shell spheres at 700 °C. The crystal structure of the particles was anatase. The specific surface area and the average pore diameter were 21.4 m2/g and 1.6 nm, respectively. The photocatalytic activity of the hollow particles was higher compared with that of solid particles.

scholarly journals 1D TiO2 Nanostructures Prepared from Seeds Presenting Tailored TiO2 Crystalline Phases and Their Photocatalytic Activity for Escherichia coli in Water

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Julieta Cabrera ◽  
Dwight Acosta ◽  
Alcides López ◽  
Roberto J. Candal ◽  
Claudia Marchi ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Photocatalytic Activity ◽  
Bactericidal Activity ◽  
Sol Gel ◽  
Titanium Isopropoxide ◽  
E Coli ◽  
1D Nanostructures ◽  
Sol Gel Synthesis ◽  
Hydrolysis Of ◽  
Tio2 Nanostructures

TiO2 nanotubes were synthesized by alkaline hydrothermal treatment of TiO2 nanoparticles with a controlled proportion of anatase and rutile. Tailoring of TiO2 phases was achieved by adjusting the pH and type of acid used in the hydrolysis of titanium isopropoxide (first step in the sol-gel synthesis). The anatase proportion in the precursor nanoparticles was in the 3–100% range. Tube-like nanostructures were obtained with an anatase percentage of 18 or higher while flake-like shapes were obtained when rutile was dominant in the seed. After annealing at 400°C for 2 h, a fraction of nanotubes was conserved in all the samples but, depending on the anatase/rutile ratio in the starting material, spherical and rod-shaped structures were also observed. The photocatalytic activity of 1D nanostructures was evaluated by measuring the deactivation of E. coli in stirred water in the dark and under UV-A/B irradiation. Results show that in addition to the bactericidal activity of TiO2 under UV-A illumination, under dark conditions, the decrease in bacteria viability is ascribed to mechanical stress due to stirring.

Effect of acidity on the properties of silica-aluminas synthesized by sol-gel method

2020 ◽  
Vol 63 (7) ◽  
pp. 126-132
Author(s):  
Lyubov V. Furda ◽  
◽  
Evgenia A. Tarasenko ◽  
Sofya N. Dudina ◽  
Olga E. Lebedeva ◽  
...  
Keyword(s):  
Surface Area ◽  
Sol Gel ◽  
Molar Ratio ◽  
Active Centers ◽  
Indicator Method ◽  
Synthesis Conditions ◽  
Alkaline Conditions ◽  
Acidic Conditions ◽  
Amphoteric Properties ◽  
Hydrolysis Of

In the present work amorphous silica-aluminas were synthesized by the coprecipitation method during the hydrolysis of an alcohol solution of tetraethoxysilane (with a tetraethoxysilane: alcohol mass ratio of 1: 1) and 6% aqueous solution of aluminum nitrate at pH values of 1, 3, and 10. The Si/Al molar ratio for all synthesized samples were 4.72 (± 0.29). The amorphous character of the investigated materials was confirmed by X-ray phase analysis. According to the results of scanning electron microscopy, it was found that the resulting powders have particles with a size of 1-20 μm. It was shown that the conditions of synthesis affected the specific surface area and porosity of the materials under study. By the method of low-temperature adsorption-thermodesorption of nitrogen it was established that silica-aluminas obtained under acidic conditions were microporous materials. For the sample obtained under alkaline conditions (pH = 10), the contribution of macropores is very significant. A decrease in surface area is observed as the pH of the synthesis increases. The Hammett indicator method was used to identify and quantify surface centers of different acidity. All studied silica-aluminas are characterized by the presence of both Brønsted basic (pKax from 7 to 12.8) and acidic (pKax from 0 to 7) centers, and Lewis basic (pKax from -4.4 to 0) with a pronounced maximum at pKax = 1.02. It was found that the synthesis conditions had a significant effect on the concentration of active centers. The values of the Hammett function are practically the same for the 3 studied silica-aluminas and describe the studied samples as materials of medium acidity. The variety of Lewis and Brønsted centers on the surface indicates the amphoteric properties of the materials under study. This gives the samples the properties of polyfunctional sorbents and catalysts.

Composites

2015 ◽  
Author(s):  
James E. Mark ◽  
Dale W. Schaefer ◽  
Gui Lin
Keyword(s):  
Low Temperatures ◽  
Powder Processing ◽  
Porous Ceramic ◽  
Sol Gel ◽  
Particle Surface ◽  
Average Diameter ◽  
Ceramic Coatings ◽  
Silica Nanocomposites ◽  
Silica Microparticles ◽  
Hydrolysis Of

A relatively new area that involves silicon-containing materials is the synthesis of “ultrastructure” materials (i.e., materials in which structure can be controlled at the level of 100 &angst;). An example is the “sol-gel” hydrolysis of alkoxysilanes (organosilicates) to give silica, SiO2. The reaction is complicated, involving polymerization and branching, but the overall reaction may be written . . . Si(OR4 + 2H2O → SiO2 + 4ROH (9.1) . . . where the Si(OR)4 organometallic species is typically tetraethoxysilane such as tetraethylorthosilicate (TEOS, with R being C2H5). In this application, the precursor compound is hydrolyzed and then condensed to yield branched polymers. Eventually a continuous swollen gel is formed. The gel is dried at moderately low temperatures to remove volatile species, and then it is fired into a porous ceramic object that can then be densified and machined into a final ceramic part. The production of ceramics by this novel route triggered interest in the ceramics community because of advantages over the conventional powder-processing approach to ceramics. Advantages include (i) the higher purity of the starting materials, (ii) the relatively low temperatures required, (iii) the possibility of controlling the ultrastructure to reduce the microscopic flaws that lead to failure, (iv) the ease with which ceramic coatings can be formed, and (v) the ease with which ceramic alloys can be prepared (e.g., by hydrolyzing solutions of both silicates and titanates). The sol-gel approach has been used to form ceramic-like phases in a variety of polymers. Poly(dimethylsiloxane) (PDMS) is the most popular. PDMS is relatively weak and stands to benefit most from reinforcement. PDMS is easily absorbs the precursor materials generally used in the solgel process. Nearly monodisperse silica microparticles can be obtained using siloxane elastomer mixtures. In some cases, the PDMS has been part of a copolymer, with ureas, imides, amideimides, and dianilines. In other approaches, the particle surface is modified, for example, with a polysiloxane. Siloxane/silica nanocomposites have also been used as “culture-stone-protective materials.” Sol-gel hydrolysis and condensation can be carried out within a polymeric matrix to generate particles of the ceramic material, typically with an average diameter of a few hundred angstroms.

Sign in / Sign up

Export Citation Format

Share Document