EVALUATION OF THE LATVIAN FLAX GENETIC RESOURCES AND PERSPECTIVE OF THEIR UTILISATION

2015 ◽  
Vol 1 ◽  
pp. 160
Author(s):  
Dace Grauda ◽  
Veneranda Stramkale ◽  
Ļubova Komlajeva ◽  
Agnese Kolodinska Bratestam ◽  
Andra Miķelsone ◽  
...  
Keyword(s):  
Plant Height ◽  
Rust Resistance ◽  
Vegetation Period ◽  
Field Trials ◽  
High Quality ◽  
Linum Usitatissimum L ◽  
Fibre Number ◽  
Total Plant ◽  
Hybrid Lines ◽  
Technical Plant

Flax (Linum usitatissimum L.) is one of the oldest fibre and oil crop in Europe, including Latvia. In the middle of the last century growing areas of this crop was reduced dramatically. Nowadays flax attracted a great interest again as a fibre and oil processor, as well as a crop for diversification of agriculture and, in the same time, as a crop for producing high quality fibre for industry, high quantity oil for biofuel and high quality oil for feeding, food, and pharmacy (source of α-linolenic acid, linoleic acid and vitamins). We evaluated all available flax accessions of the Latvian origin and number of their hybrid lines. Agronomically important qualitative and quantitative traits, such as total plant height, technical plant height, number of seed vessels, logging resistance, vegetation period, yield of straws and seeds, 1000 seeds weight, bast fibre, number of seeds in a seed vessel, oil content and rust resistance gene L alleles L2 and L9 were recorded. Results of the field trials of two last years were summarized. Local accessions are useful as a source for breeding to adaptation of flax varieties to the local Latvian conditions. With use of molecular methods flax rust resistance allele L2 and L9 were found in eleven accessions.

scholarly journals Passport data and valorisation data of 33 accessions from the collection of genetic resources of the species Linum usitatissimum L.

2020 ◽  
Vol 66 (4) ◽  
pp. 32-42
Author(s):  
Grażyna Silska
Keyword(s):  
Genetic Resources ◽  
Linum Usitatissimum ◽  
Plant Genetic Resources ◽  
Numerical Data ◽  
Vegetation Period ◽  
Linum Usitatissimum L ◽  
Total Plant ◽  
Flax Seeds ◽  
Paper Documentation ◽  
Plant Length

Summary Introduction: In 2020, the Institute of Natural Fibres and Medicinal Plants (INF&MP) implemented the contract No. 7/PW 1.2 – IWNiRZ Poznań/KCRZG/2020 for the performance of a research service under the long-term programme “Creating scientific foundations for biological progress and protection of plant genetic resources as a source of innovation and support for sustainable agriculture and safety food for country”. Objective: The aim of the research was to prepare passport and valorisation data for 33 accessions of flax (Linum usitatissimum L.) sown at the INF&MP Experimental Station in Pętkowo. Methods: The field experiment was conducted on 33 samples of flax seeds, which were sown on an area of 1.6 m2. Morphological features were presented by means of numerical data and their evaluation. The agricultural characteristics (numerical values and percentage of the collective pattern) and lengths of vegetation period were also presented. The evaluation of the performed characteristics of flax accessions was presented numerically and the data were given to the International Flax Database. Results: On the basis of paper documentation, the country of origin of the accessions, the type of genotypes by origin (landrace, variety) and the date of inclusion of the accessions in the flax collection were determined. The results of the characterization of morphological trials were as follows: the total plant length of the flax plants ranged from 51.4 cm (La Estanzuella 117) to 76.5 cm (WUKR 06-417) According to the methodology of the International Flax Database, the total plant length were short (28 accessions), medium short (3) and medium (1). Technical length was usually short (28 accessions) and medium short (4 accessions). Stem thickness for all accessions was medium: 1.6–2.5 mm. The length of the panicle was long only for the Opal variety, for 25 accessions - medium and short for 6 accessions. A number of bolls from panicle was: 9.1–30.8. The 1000 seed weight was low for 25 accessions of flax and very low for 8 genotypes of flax. Conclusions: Both studied vegetation periods were short in the following flax accessions: AC Linora, Manchwrian, Noralta and T-397. Flax genotype WUKR-846 (I2010/0031) should be deleted from the flax genetic resources collection and considered as worthless as breeding material. The WUKR 06-417 accession collected during the field expedition is distinguished by a high fibre content – 27%. The highest seed yield per plot was obtained from the cultivation of the following linseed flax cultivars: Redwood, AC Mc Duff, Norlin, Noralta and Jenny.

Film coating of seeds with Bacillus cereus RS87 spores for early plant growth enhancement

2008 ◽  
Vol 54 (10) ◽  
pp. 861-867 ◽  
Author(s):  
Kanchalee Jetiyanon ◽  
Sakchai Wittaya-Areekul ◽  
Pinyupa Plianbangchang
Keyword(s):  
Plant Growth ◽  
Bacillus Cereus ◽  
Plant Height ◽  
Root Length ◽  
Film Coating ◽  
Field Trials ◽  
Growth Enhancement ◽  
Vegetative Cells ◽  
Plant Growth Promoting ◽  
Growth Promoting

The plant growth-promoting rhizobacterium Bacillus cereus RS87 was previously reported to promote plant growth in various crops in both greenhouse and field trials. To apply as a plant growth promoting agent with practical use, it is essential to ease the burden of routine preparation of a fresh suspension of strain RS87 in laboratory. The objectives of this study were to investigate the feasibility of film-coating seeds with B. cereus RS87 spores for early plant growth enhancement and to reveal the indoleacetic acid (IAA) production released from strain RS87. The experiment consisted of the following 5 treatments: nontreated seeds, water-soaked seeds, film-coated seeds, seeds soaked with vegetative cells of strain RS87, and film-coated seeds with strain RS87 spores. Three experiments were conducted separately to assess seed emergence, root length, and plant height. Results showed that both vegetative cells and spores of strain RS87 significantly promoted (P ≤ 0.05) seed emergence, root length and plant height over the control treatments. The strain RS87 also produced IAA. In conclusion, the film coating of seeds with spores of B. cereus RS87 demonstrated early plant growth enhancement as well as seeds using their vegetative cells. IAA released from strain RS87 would be one of the mechanisms for plant growth enhancement.

The effect of seed rate and growing season on four oat cultivars: II. Culm morphology and panicle conformation

1968 ◽  
Vol 70 (3) ◽  
pp. 405-410 ◽  
Author(s):  
I. T. Jones ◽  
J. D. Hayes
Keyword(s):  
Relative Length ◽  
Field Trials ◽  
Grain Weight ◽  
Seed Rate ◽  
Total Height ◽  
Growing Seasons ◽  
Length Increase ◽  
Total Plant ◽  
Oat Cultivars ◽  
1000 Grain Weight

SUMMARYThe effects of low and high seed rates on height, culm and panicle morphology of four oat cultivars grown in field trials in two growing seasons were investigated. Significant differences were detected between cultivars in the number of extended culm internodes, panicle whorls initiated, total height, length of panicle and individual internodes. Differences in seed rate had no effect on the number of culm internodes, but high seed rate significantly reduced the whorl number in the panicle, total plant height, length of panicle and the three upper internodes. The fourth internode remained unaffected, but the lowermost internode showed a relative length increase at high seed rate. The interaction of cultivar x seed rate was significant for total height, and for the length of the central internodes, but the length of the panicle was similarly affected in all cultivars.Panicle conformation was markedly affected by seed rate; high population density caused a reduction in number of grain-bearing whorls, and reduced the number of spikelets and total grain weight per whorl, and 1000 grain weight particularly in the lowermost whorls. The percentage of husk in the grain was increased slightly at high seed rate. The effect of seed rate on culm and panicle morphology is discussed in relation to the development of stiffer-strawed oats.

scholarly journals Wheat Grain Protein Content under Mediterranean Conditions Measured with Chlorophyll Meter

Plants ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 374
Author(s):  
Marta Aranguren ◽  
Ander Castellón ◽  
Ana Aizpurua
Keyword(s):  
Protein Content ◽  
Stem Elongation ◽  
Field Trials ◽  
Grain Protein Content ◽  
Grain Protein ◽  
Bread Making ◽  
High Quality ◽  
Chlorophyll Meter ◽  
Growing Seasons ◽  
Different Sources

Adequate N fertilisation is crucial to increase the grain protein content (GPC) values in wheat. The recommended level of GPC needed to achieve high-quality bread-making flour should be higher than 12.5%. However, it is difficult to ensure the GPC values that the crop will achieve because N in grain is derived from two different sources: N remobilized into the grain from N accumulated in the pre-anthesis period, and N absorbed from the soil in the post-anthesis period. This study aimed to (i) evaluate the effect of the application of N on the rate of stem elongation (GS30) when farmyard manures are applied as initial fertilisers on GPC and on the chlorophyll meter (CM) values at mid-anthesis (GS65), (ii) establish a relationship between the CM values at GS65 and GPC, and (iii) determine a minimum CM value at GS65 to obtain GPC values above 12.5%. Three field trials were performed in three consecutive growing seasons, and different N fertilisation doses were applied. Readings using the CM Yara N-TesterTM were taken at GS65. The type of initial fertiliser did not affect the GPC and CM values. Generally, the greater the N application at GS30 is, the higher the GPC and CM values are. CM values can help to estimate GPC values only when yields are below 8000 kg ha−1. Additionally, CM values at GS65 should be higher than 700 to achieve high-quality bread-making flour (12.5%) at such yield levels. These results will allow farmers and cooperatives to make better decisions regarding late-nitrogen fertilisation and wheat sales.

scholarly journals Effects of Organic Manure Source and Weeding Frequencies on Growth Parameters of Jute Mallow (Corchorus olitorious)

2020 ◽  
pp. 28-36
Author(s):  
M. M. Olorukooba ◽  
R. Suleiman ◽  
O. Olukotun ◽  
R. Mohammed ◽  
E. Apene ◽  
...  
Keyword(s):  
Plant Height ◽  
Growth Parameters ◽  
Block Design ◽  
Poultry Manure ◽  
Field Trials ◽  
Organic Manure ◽  
Cow Dung ◽  
Weed Infestation ◽  
Number Of Leaves ◽  
Experimental Treatments

Field trials were carried out during 2018 and during 2019 dry season periods at Federal College of Forestry and Mechanization Afaka Kaduna, located between latitude 10° 35”N and longitude 007° 21”E at altitude 644 m above sea level, to determine the effects of organic manure source and weeding frequencies on growth parameters of jute mallow (Corchorus olitorious). The experimental treatments consists of ten combinations of poultry manure + weed free, cow dung + weed free, goat dropping + weed free, poultry manure + weeding at 2 WAT, cow dung + weeding at 2 WAT, goat dropping + weeding at 2 WAT, poultry manure + weeding at 4 WAT, cow dung + weeding at 4 WAT, goat dropping + weeding at 4 WAT and  no organic manure application + no weeding which were laid out in a randomize complete block design (RCBD) and replicated 3 times The growth parameters observed  and measured were crop vigour score, plant height, shoot diameter, number of leaves and number of  primary branches. Result of the study showed that at harvest (8 WAT) all the treatments significantly affected the vigour of jute mallow crop and gave comparable score than the least observed with no nutrient + no weeding as control. The result revealed that plant growth at harvest exhibited significantly taller plant with application of poultry manure + weeding at 2 WAT. In conclusion the result obtained from the study showed that poultry manure at 4 tons /ha + weeding at 4 WAT resulted in taller plant height, wider shoot diameter, increased number of leaves, number of branches than all other treatment due to lower weed infestation, it is therefore recommended as the best treatment combination to obtained the best growth rate of jute mallow.

Response of winter barley cultivars to nitrogen and a plant growth regulator in relation to lodging

1991 ◽  
Vol 116 (2) ◽  
pp. 191-200 ◽  
Author(s):  
E. M. White
Keyword(s):  
Plant Growth ◽  
Plant Height ◽  
Growth Regulator ◽  
Plant Growth Regulator ◽  
Unit Length ◽  
Dry Weight ◽  
Field Trials ◽  
Winter Barley ◽  
Barley Cultivars ◽  
Damage Susceptibility

SUMMARYApplications of nitrogen and a plant growth regulator (mepiquat chloride and ethephon) were used to manipulate stem structure and induce differing degrees of damage due to leaning and lodging in six cultivars of winter barley grown in Belfast, UK, in 1986/87. Weighted incidences of leaning and lodging were combined to give an index indicating damage susceptibility of the cultivars. The index was very high (70) in Pipkin and ranged between 1 and 18 in the other cultivars. Differences between cultivars in number of internodes, plant height and stem weight did not explain their differences in resistance to damage. However, dry weight per unit length ranged from 2·35 and 2·34 mg/mm in the strongest cultivars, Panda and Jennifer, respectively, to 1·75 mg/mm in the weakest cultivar, Pipkin.Nitrogen application increased plant height but did not affect dry weight/main stem, so that dry weight/unit length of stem decreased. The growth regulator treatments reduced plant height and although dry weight/stem did not decrease significantly, dry weight/unit length of stem was similar in treated and untreated plots.Dry weight/unit length has potential as an objective indicator of straw strength in winter barley cultivars and could be used in cultivar evaluation in the absence of damage in field trials.

Appropriate Nitrogen and Phosphorus Fertilizer Regime for Sunflower (Helianthus Annuus L.) In the Humid Tropics

Helia ◽  
2019 ◽  
Vol 42 (70) ◽  
pp. 111-125
Author(s):  
E. Akpojotor ◽  
V.I.O. Olowe ◽  
C. Adejuyigbe ◽  
S.O. Adigbo
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Agricultural Research ◽  
Block Design ◽  
Field Trials ◽  
Humid Tropics ◽  
Single Application ◽  
Nitrogen And Phosphorus ◽  
Yield Attributes ◽  
P Fertilizer

AbstractTwo field trials were conducted on the Research Farm of the Institute of Food Security, Environmental Resources and Agricultural Research, Nigeria during the late cropping seasons (Jun.–Nov.) of 2014 and 2015 to evaluate the agronomic performance of four recently released sunflower varieties (SAMSUN-1, SMASUN-2, SAMSUN-3 and SAMSUN-4) to three fertilizer regimes: Control, Split application of 30 kg N + 28 kg P2O5 at 21 days after sowing (DAS) and at anthesis and Single application of 60 kg N and 56 kg P2O5 at 21DAS. The experiment was laid out in a randomized complete block design using a 3 × 4 factorial arrangement and replicated three times. Data were collected on phenology, plant height, seed yield and yield attributes, and quality. The varietal effect was only significant in 2015 for head weight, a number of achene per head and 100 achene weight. Application of N and P fertilizer either as split or single significantly (P ≤ 0.05; F-test) enhanced plant height at R5 and R9, 100 achene weight, achene weight per head and grain yield in both years. Single application resulted in significantly (P ≤ 0.05) higher grain yield in 2014 than the split and control and was on par with a split. Significant variety × fertilizer regime was recorded for protein content in 2014 and 2015, and oil content in 2015. Therefore, a single application of N and P fertilizers at 21 WAS is recommended for adoption in the humid tropics to enhance seed and oil production of SAMSUN-3 and SAMSUN-4.

scholarly journals Impact of Different Phytohormones on Morphology, Yield and Cannabinoid Content of Cannabis sativa L.

Plants ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 725 ◽  
Author(s):  
Lisa Burgel ◽  
Jens Hartung ◽  
Daniele Schibano ◽  
Simone Graeff-Hönninger
Keyword(s):  
Plant Height ◽  
Plant Architecture ◽  
Biomass Yield ◽  
Cannabis Sativa ◽  
Unit Area ◽  
Branch Length ◽  
Specific Level ◽  
Total Plant ◽  
The Impact ◽  
Axillary Branches

The impact of exogenously applied plant growth regulators (PGR), 1-naphthalenaecetic acid (NAA), 6-benzylaminopurine (BAP), and a mixture of both (NAA/BAP-mix), was investigated in regard to plant height, length of axillary branches, number of internodes, biomass yield and cannabinoid content of three different phytocannabinoid-rich (PCR) Cannabis genotypes. The results showed that total plant height was significantly reduced under the application of NAA (28%), BAP (18%), and NAA/BAP-mix treated plants (15%). Axillary branch length was also significantly reduced by 58% (NAA) and 30% (NAA/BAP-mix). BAP did not significantly reduce the length of axillary branches. The number of internodes was reduced by NAA (19%), BAP (10%), and the NAA/BAP-mix (14%) compared to the untreated control. NAA application influenced the plant architecture of the tested cv. KANADA beneficially, resulting in a more compact growth habitus, while inflorescence yield (23.51 g plant−1) remained similar compared to the control (24.31 g plant−1). Inflorescence yield of v. 0.2x and cv. FED was reduced due to PGR application while cannabinoid content remained stable. Overall, the application of PGR could be used on a genotype-specific level to beneficially influence plant architecture and optimize inflorescence yield per unit area and thus cannabinoid yield, especially in the presence of space limitations under indoor cultivation.

scholarly journals Screening of jute and kenaf varieties for salinity tolerance

2018 ◽  
Vol 6 (2) ◽  
pp. 214
Author(s):  
Md. Isfatuzzaman Bhuyan ◽  
K M. Mehadi Hassan ◽  
Nowrose Jahan Lipi ◽  
Md Rafiq Uddin ◽  
Md Monirul Islam ◽  
...  
Keyword(s):  
Plant Height ◽  
Salinity Stress ◽  
Salinity Tolerance ◽  
Dry Weight ◽  
Germination Inhibition ◽  
Germination Test ◽  
Salinity Levels ◽  
Total Plant ◽  
Number Of Leaves ◽  
Total Dry Weight

A study was conducted in the Department of Agronomy, Bangladesh Agricultural University (BAU), Mymensingh from April to August 2012 to examine the salinity tolerance of eight jute varieties (CVE-3, C-83, CVL-1, BJC-7370, O-795, O-9897, OM-1, O-72) and two kenaf varieties (HC-95 and HC-2). Initially germination of these varieties were evaluated under six salinity levels viz. 0mM, 20mM, 40mM, 60mM, 80mM, and 100mM NaCl in the seed laboratory of the Department of Agronomy. Afterwards, all the varieties was grown in pots in the net house under four salinity levels viz. 0mM, 25mM, 50mM, and 75mM. The results from the germination study revealed that under control condition (0mM NaCl) all the jute varieties showed germination more than 80% both at 7 and at 14 days after seed sowing, whereas kenaf varieties had germination a little less than 80%. Among the jute varieties, O-72 showed the highest germination (92%), which was statistically similar with those of OM-1(91%), O-795 (90%), and C-83(87%). Salinity stress decreased germination drastically in all of the jute and kenaf varieties. A salinity level of 100mM caused the highest germination inhibition (74.70%) in jute variety CVL-1, which was very close to those of BJC-7370 and O-72. On the other hand, the lowest germination inhibition (51.11%) was recorded in jute variety O-795. The results of the pot trail showed that the plant characters of jute and kenaf varieties were affected significantly by salinity stress. All the varieties produced their respective plant height, number of leaves per plant, and plant dry weight under control condition (no salinity). Among these varieties, CVE-3 produced the highest plant height (145.2cm), and total dry weight (22.55g), whereas O-72 produced the highest number of leaves per plant (24.67). All these plant characters decreased sharply due to salinity stress irrespective of variety. However, the rate of decrease of plant characters occurred differentially in the jute and kenaf varieties. The highest rate of decrease in number of leaves (74.22%) was found from the variety CVE-3, whereas the lowest one was recorded from the variety HC-2 (51.68%). Salinity stress caused the highest decrease in total plant dry weight (73.68%) in the variety CVL-1 and plant height (73.64%) also in the variety CVL-1. On the contrary, the lowest decrease in plant dry weight (50.99%) was found in the variety O-9897 and plant height also in variety O-9897 (50.88%). Based on the results from germination test and pot trail, it can be inferred that jute variety O-9897 appeared to be the most salt tolerant followed by O-795, HC-2, HC-95, CVE-3, O-72, C-83, BJC-7370, OM-1, and CVL-1.    

Genetic Recourses : Evaluation Of The Value Of Some Old Latvian Flax Accessions

2015 ◽  
Vol 2 ◽  
pp. 297
Author(s):  
Zofija Jankauskienė ◽  
Elvyra Gruzdevienė
Keyword(s):  
Plant Height ◽  
Flower Colour ◽  
Vegetation Period ◽  
Fibre Content ◽  
Research Centre ◽  
Breeding Programs ◽  
Experimental Station ◽  
Fibre Yield ◽  
Phenological Phases

In the resent years evaluation and conservation of genetic recourses becomes of great importance. Some of the genotypes could be lost when un-sufficient attention is given to them. Some old (created before WWII) Latvian flax accessions have been investigated at the collection nursery at the Upytė Experimental Station of the Lithuanian Research Centre for Agriculture and Forestry in 2007-2010. Phenological phases, plant height, flower colour, stem, seed and long fibre yield, fibre content and quality (flexibility, strength, quality number), duration of vegetation period, resistance to lodging, etc., have been investigated. The most valuable genotypes have been suggested to be used in further breeding programs.

Sign in / Sign up

Export Citation Format

Share Document