scholarly journals The Difference Characteristicsof Collagen from Tilapia (Oreochromis niloticus) Bone, Skin, and Scales

2019 ◽  
Vol 22 (2) ◽  
pp. 403-410
Author(s):  
Romadhon Romadhon ◽  
Yudhomenggolo Sastro Darmanto ◽  
Retno Ayu Kurniasih
Keyword(s):  
Water Content ◽  
Oreochromis Niloticus ◽  
Raw Materials ◽  
Raw Material ◽  
Randomized Design ◽  
Fish Collagen ◽  
Different Types ◽  
Completely Randomized Design ◽  
The Difference ◽  
Residual Processing

Tilapia (Oreochromis niloticus) is one of the main commodities of freshwater fish in Indonesia. Mostly, tilapia is exported in the form of fillets which produce residual processing including bobe, skin, and scales which can reach 50 to 70% of the total weight of fish. The aimed of this study was to extract and characterize collagen from bone, skin, and scales of tilapia. The research method used a Completely Randomized Design (CRD) by treating the different types of collagen raw materials, namely bone, skin, and scales of tilapia. The results showed that the type of raw material affected the yield, water content, color, and pH (p<0.05). The collagen yield in this study was 0.53% (bone), 0.63% (scales) and 0.94% (skin). The small amount of amendment was caused by the concentration of acetic acid being too low. the smallest water content in tilapia fish collagen 2.17%; the best brightness of collagen in fish bones 76.91%; the value of the largest degree of white on fish scales 75.95%; pH content close to neutral fish collagen scales 6.49; Morphological results of collagen produced using SEM, the presence of pores seen in the collagen of tilapia fish due to the space between the collagen fibers while. Collagen from the skin and scales has the same morphology, which is shaped in small squares and smooth surface without pores

scholarly journals LIMBAH TERNAK KELINCI SEBAGAI BAHAN BAKU PUPUK ORGANIK POTENSIAL

2018 ◽  
Vol 16 (2) ◽  
pp. 152
Author(s):  
Risvan Anwar ◽  
Djatmiko Djatmiko
Keyword(s):  
Raw Materials ◽  
Organic Fertilizer ◽  
Nutrient Content ◽  
Raw Material ◽  
Organic Fertilizers ◽  
Animal Waste ◽  
Livestock Waste ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Many Sources

Many sources of raw materials which allegedly can enrich the nutrient content in the organic fertilizer. The weakness of organic fertilizer for this is the low level of nutrients contained in them.This study aims to determine the nutrient content contained in various combinations of organic fertilizer raw materials with rabbit animal waste as the main raw material.This study aims to determine the nutrient content in various combinations of organic fertilizer raw materials with rabbit animal waste as the main raw material. The experiment used a completely randomized design with raw materials as treatments, Livestock Waste Rabbit (LTK), Cow Manure (PKS) and Abu Straw Rice (AJP). Such treatment: B1 = LTK; B2 = LTK: PKS = 2: 1; B3 = LTK: AJP = 3: 1; B4 = LTK: PKS: AJP = 6: 2: 1; B5 = LTK: PKS: AJP = 5: 2: 1; B6 = LTK: PKS: AJP = 4: 2: 1; B7 = LTK: PKS: AJP = 3: 2: 1; B8 = LTK: PKS: AJP = 2: 2: 1; B9 = LTK: PKS: AJP = 1: 2: 1. The research concluded (a) Organic fertilizers are made from various materials raw has fulfilled SNI 19-7030-2004 about the specifications of Organic Waste Compost. (B) A combination of organic fertilizer raw materials significantly affect the nutrient content of manure. (C) Organic fertilizers expectations are: (a) Raw materials of animal wastes rabbit (LTK), (b) LTK: PKS: AJP = 6: 2: 1, (c) LTK: PKS: AJP = 2: 2: 1 and (d) LTK: PKS: AJP = 1: 2: 1.

scholarly journals Produktivitas Rumput Hamil (Panicum maximum cv Hamil) yang Ditanam Menggunakan Benih Berbeda

2021 ◽  
Vol 26 (3) ◽  
pp. 444-449
Author(s):  
Ahmad Fanindi ◽  
Endang Sutedi ◽  
Harmini Harmini
Keyword(s):  
Reproductive Traits ◽  
Morphological Characters ◽  
Selection Method ◽  
Panicum Maximum ◽  
Plant Materials ◽  
Randomized Design ◽  
Different Types ◽  
Completely Randomized Design ◽  
The Difference ◽  
Generative Phase

Reproductive traits determine the selection method in plant breeding. The benggala grass of the Hamil cultivar was thought to be apomictic; thus, a study was conducted to determine its reproduction. The research began by studying the morphological characters, continued with observing the generative phase and seed production of the cultivar planted from seeds (generative) and from pols (vegetative). The experiment was conducted in the greenhouse of the Research Institute of Animal Production. The experimental design was a completely randomized design with ten replications, and the treatments were different types of plant materials: seeds and pols. The Hamil cultivar taken from RIAP Collection was planted in pots with a diameter of 40 cm and a height of 30 cm. The results showed that most of the morphological characters of the Hamil cultivar planted from seeds and from pols were not different (P >0.05), so it was presumed that they were apomictic. The difference in morphology was only in the length and width of the flag leaves and the length of the internodes, where the cultivars planted using seeds were higher. The production of seeds, pithy seed weight, and seed germination of cultivars planted using seeds were higher (P <0.05). Further research is needed to determine the apomixis properties based on cytologically Hamil cultivars.   Keywords: apomixis, benggala grass, morphology, plnting material; seed

scholarly journals Edible coating quality with three types of starch and sorbitol plasticizer

2020 ◽  
Vol 142 ◽  
pp. 02003 ◽  
Author(s):  
Retno Utami Hatmi ◽  
Erni Apriyati ◽  
Nurdeana Cahyaningrum
Keyword(s):  
Tensile Strength ◽  
Water Vapor ◽  
Raw Materials ◽  
Chemical Properties ◽  
Edible Coating ◽  
Raw Material ◽  
Randomized Design ◽  
Two Factors ◽  
Completely Randomized Design ◽  
Arrowroot Starch

Edible coating is one form of packaging technology with environmentally friendly theme. The raw materials of edible coating derived from nature, while the waste is decomposed or even zero waste. The research of edible coating using experimental design RAL (completely randomized design) with two factors, namely the type of raw material used tuber starch (cassava, arrowroot and canna) and the percentage of starch (3%, 4% and 5%) (b/v) with three replications time. The quality analisys of edible coating includes the physical properties (thickness (mm), tensile strength (N) and elongation (mm)) and chemical properties (moisture content (%), solubility (%), the water vapor transmissin rate (g/hour) and peroxide (mek/kg). The research showed that the edible coating with sorbitol plasticizer of arrowroot starch 4% provide best physicochemical properties (thickness 0,09mm; 1,63N tensile strength; elongation 84,38mm; water content of 11.19%; solubility of 31.40%; the transfer of water vapor 0,16g / h and 3,20mek/ kg).

scholarly journals The Effect of Gatot (Fermented Dried Cassava) and Red Bean Ratio on Water Content and Organoleptic Characteristics of The "Gatotkaca" Analog Rice

2019 ◽  
Vol 6 (1) ◽  
Author(s):  
Eries Kusmiandany ◽  
Yoga Pratama ◽  
Yoyok Budi Pramono
Keyword(s):  
Experimental Design ◽  
Water Content ◽  
Analysis Of Variance ◽  
Significance Level ◽  
Organoleptic Characteristics ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
The Difference ◽  
Red Bean

This study aimed to evaluate the effect of the ratio of gatot and red beans usage on water content and organoleptic characteristics from "Gatotkaca" analog rice. The material in this study was gatot (fermented cassava) and red beans. The experimental design used was a completely randomized design (CRD) with 4 treatments and 5 replications. This study consisted of 4 different analog rice formulations, namely T1 (90% gatot: 10% red beans); T2 (85% gatot: 15% red beans); T3 (80% gatot: 20% red beans); T4 (75% gatot: 25% red beans). Data were analysed using Analysis of Variance (ANOVA) with the significance level 5%. The results showed that the difference in the ratio of the usage of gatot but red beans didn’t have a significant effect (p>0.05) on the water content and organoleptic characteristics. Treatment with a ratio of gatot and 85% red beans  15% gatot was the best treatment.

scholarly journals Pemanfaatan Limbah Hasil Perikanan: Lem Ikan Berbahan Baku Sisik Ikan yang Berbeda

2018 ◽  
Vol 1 (2) ◽  
pp. 60
Author(s):  
Dea Kurnia Sari
Keyword(s):  
Water Content ◽  
Wood Surface ◽  
Nile Tilapia ◽  
Surface Damage ◽  
National Standard ◽  
Fish Scales ◽  
Randomized Design ◽  
Different Types ◽  
The Difference ◽  
Tilapia Scale

Fishery processing industry such as fillet fish and boneless milkfish which are increasing rapidly raises new problem, that is industrial waste which one of them is fish scales. Fish scales in the know contain collagen which can be used as adhesive or glue and can be one of the innovations for waste processing of scales. The purpose of this study was to determine the effect of different fish scales on quality of fish glue from three different types of fish scales. The material used in this study is the scales of fish Seabass (Lates calcarifer), nile tilapia (Oreochromis niloticus), and milkfish (Chanos chanos Forks), acetic acid, NaOH, and aquadest. The research method used is experimental laboratories using Completely Randomized Design with treatment of three different types of fish scales with three repetitions each. The results obtained were analyzed using the analysis of variance, stickiness value, wood surface damage, viscosity, pH and water content of fish glue. To know the difference between treatments, the data were analyzed with real honest difference analysis. The results of this study showed that fish scales differed significantly (P <0.05) on all analysis, but not pH of fish glue. Based on the results of this study that meets the Indonesian National Standard no. 06-6049-1999 on Quality Requirements of Polyvinyl Acetate Emulsion For Wood Working Adhesives, Seabass fish scales is the best fish glue with quality: stickiness value 8.64 N/mm2, 40.47 % wood surface damage, viscosity 7.68 poise, pH 4.80, and water content of 59.92 %. Keywords: Fish glue; Milkfish Scale; Nile Tilapia Scale; Seabass Scale

Penggunaan Pot Berbahan Dasar Organik untuk PembibitanGmelina arborea Roxb. di Persemaian

1970 ◽  
Vol 40 (3) ◽  
Author(s):  
Sri Wilarso Budi ◽  
Andi Sukendro ◽  
Lina Karlinasari
Keyword(s):  
Organic Matter ◽  
Raw Materials ◽  
Raw Material ◽  
Forest Trees ◽  
Seedling Production ◽  
Gmelina Arborea ◽  
Randomized Design ◽  
Two Factors ◽  
Completely Randomized Design

The objectve of this research was to obtain the best materials composition and adhesive of organic pot for forest trees seedling production. Organic pot strength was evaluated by testing the strength of rupture elasticity and elasticity stiffness of each composition. The bioassay testing used Completely Randomized Design with factorial pattern, consisting of two factors, (1) basic raw materials of the pot (used newspaper, litter and compost) and (2) the type of adhesive (control, tanin and starch). The results showed that the adhesive starch gave higher strength, whereas adhesive tannin gave higher stiffness as compared to control. Results of bioassay showed that the mixture (50:50 v/v) of basic materials of used newspaper and compost (KKK) which were glued with tannin, produced the best results for height and diameter increament with the value of 35.85 cm, 0.31 cm respectively and biomass value of 0.99 g after 12 weeks of planting. The highest level of damage in organic pot with basic raw materials KKK without adhesive was 47.6%, whereas lowest level of damage in organic pot with basic raw material used newspaper (KK) with tannin addhesive was 2.0% after 12 weeks in the nursery.Keywords: adhesive, Gmelina arborea,organic pot, organic matter, nursery,

scholarly journals QUALITY OF CORN SEEDS STORED IN DIFFERENT TYPES OF PACKAGING AND STRESS CONDITIONS

2020 ◽  
Vol 28 ◽  
pp. 185-191
Author(s):  
André Fernandes Capilheira ◽  
Joseano Graciliano da Silva ◽  
Jerffeson Araujo Cavalcante ◽  
Nander Ferraz Hornke ◽  
Gizele Ingrid Gadotti
Keyword(s):  
Water Content ◽  
Storage Temperature ◽  
Cold Test ◽  
Randomized Design ◽  
Different Types ◽  
Agricultural Potential ◽  
Physiological Quality ◽  
Completely Randomized Design ◽  
Sowing Period

Corn (Zea mays) is one of the most cultivated poaceae in the world with high agricultural potential. It is propagated through seeds, which sometimes remain stored until the sowing period. Among the various forms of storage, some aspects related to the environment and the type of material that constitutes the packaging may compromise the viability and vigor of these seeds. Therefore, the objective of this study was to evaluate the physiological quality of corn seeds stored in different types of packaging and subjected to conditions of high temperature and relative humidity throughout storage. For this purpose, water content, germination and vigor were evaluated through the cold test. A completely randomized design in a 4 x 4 factorial scheme (packaging x evaluation times) with four replications was used. Data were subjected to analysis of variance and regression, and the means were compared by Tukey test at 5% probability, using the Sisvar 5.3 statistical software. It was concluded that, in 45 days of storage, the water content in corn seeds reached values of up to 13.62%, which resulted in a reduction in the vigor due to high respiration caused by the storage temperature.

Variasi komposisi daun Ketapang dan kulit pisang sebagai media tumbuh pakan alami jentik nyamuk

2021 ◽  
Vol 9 (2) ◽  
Author(s):  
Riky R. Tununu ◽  
Jhonly Solang ◽  
Henneke Pangkey ◽  
Winda M. Mingkid ◽  
Reni L. Kreckhoff ◽  
...  
Keyword(s):  
Culture Media ◽  
Banana Peel ◽  
Mosquito Larvae ◽  
Randomized Design ◽  
Different Types ◽  
Two Factors ◽  
Completely Randomized Design ◽  
The Difference ◽  
Materials Used

This study aimed to 1) determine the best combination between ketapang and banana peels for the propagation of life feed mosquito larvae; 2) determine the culture media that can produce mosquito larvae optimally. The containers used in this study were 24 buckets with a size of 5 litres. Some of the materials used in the study were dried ketapang leaves, goroho banana peels, kepok banana peels and water. This study used a factorial Completely Randomized Design (CRD) consisting of two factors and three replications. The first factor was the difference in the number of ketapang leaves. The second factor was the difference in banana peels types. The first factor included the difference in the number of ketapang leaves, consisting of: Treatment 0 = without ketapang leaves, Treatment 1 = 50 grams of ketapang leaves, Treatment 2 = 75 grams of ketapang leaves, Treatment 3 = 100 grams of ketapang leaves. The second factor included differences in banana peels, which consist of: Treatment 1 = one kepok banana peel, Treatment 2 = one goroho banana peel. The results were different types of banana peels affected the numbers of mosquito larvae, where the best was kepok banana peels; the difference in weight of ketapang leaves did not have a significant effect on the number of mosquito larvae. The container used in this study was a bucket with a volume of 5 L. The banana peels used were goroho banana peels and ripe yellow kapok banana peels. Ketapang leaves were preapared with a weight 0f 0, 50, 75, and 100 grams, respectively. Shoe banana peels and  goroho banana, one skin eachand ketapang leaves 0, 50, 75, and 100 grams, respectively, put together wit the jalah used to wrap between ketapang leavesand spatu banana peels and goroho banana, then put into a container that has been filled wit 3 L of water.

scholarly journals EFFECT OF DIFFERENT TYPES OF FERTILIZER ON THE GROWTH OF MARINE PHYTOPLANKTON POPULATION Chlorella vulgaris

2021 ◽  
Vol 4 (1) ◽  
pp. 65-72
Author(s):  
M. Fauzan ◽  
Sofyan Husein Siregar ◽  
Syafruddin Nasution
Keyword(s):  
Chlorella Vulgaris ◽  
Marine Phytoplankton ◽  
Relative Growth ◽  
Randomized Design ◽  
Triple Super Phosphate ◽  
Different Types ◽  
West Sumatra ◽  
Absolute Growth ◽  
Completely Randomized Design ◽  
The Difference

This research was conducted on October 13-26, 2019 in the Regional Technical Implementation Unit of the Seawater and Brackish Aquaculture Fisheries Office (UPTD BPBALP Teluk Buo), West Sumatra. This study aims to determine the effect of applying different types of fertilizers to the growth of Chlorella vulgaris microalgae populations on laboratory scale culture. The method used in this study was an experimental method in the laboratory using a completely randomized design (CRD) one factor, namely the difference in fertilizer types with 3 (three) replications. Fertilizers used are Walne fertilizer, ZA (Zwavelzure Ammoniak) and TSP (Triple Super Phosphate). The testing organism in this study was phytoplankton C. vulgaris. The container used was a glass jar (3 liter capacity). The parameters measured in this study include absolute growth, relative growth, specific growth, self-doubling time and water quality. The results of this study indicate that the best type of fertilizer for C.vulgaris population growth was TSP fertilizer, followed by ZA fertilizer and the lowest in Walne fertilizer.

scholarly journals Application of different Fresh Fish Handling Technique on the Quality of Raw Ingredients of Pindang Production

2017 ◽  
Vol 19 (2) ◽  
pp. 89 ◽  
Author(s):  
Pandit I Gde Suranaya
Keyword(s):  
Room Temperature ◽  
Raw Materials ◽  
Raw Material ◽  
P Value ◽  
Fresh Fish ◽  
Randomized Design ◽  
Handling Technique ◽  
Completely Randomized Design ◽  
Crushed Ice

Histamine toxicity can be occurred after consumsing decomposing fish (pindang). The community (fishermen) perform different handling techniques on raw materials of pindang to slow down the decomposition process. This research is aimed to know the influence of various techniques of handling fish on the quality of raw materials of pindang. This research used completely randomized design with single factor. This study compared various methods of fish handling commonly used by community (fisherman in Kusamba village) to maintain the quality of raw materials of pindang, such as: kept on room temperature (technique A), add 1 kilogram crushed ice for 4 kilogram fishes (technique B), add 10% salt (technique C), and combination of technique B and C (ice and fish combination 1:8 plus 5% salt as technique D). Diversity analysis show a significant influence of different techniques of fish handling on the quality of raw material of pindang (p value <0.05). Addition of crushed ice show the best quality result among fish handling technique with histamine levels 11.30 mgN%, moisture content 74.53%, TVB 20.19 mgN%, salt 0.32%, bacteria 13 x 101 colonies / g, and negative coliform. Organoleptic assessment for B techniques also show the best result with visibility score 8.0 (bright, strong, and thin scale), eye 7.7 (convex, slightly foggy cornea, slightly faint pupil), odor 7.8 (soft odor), and texture 7.8 (elastic).

Sign in / Sign up

Export Citation Format

Share Document