scholarly journals Morphometric study of sacrum and its clinical implications in population in Bihar

2021 ◽  
Vol 8 (4) ◽  
pp. 301-304
Author(s):  
Sanjay Kumar ◽  
Binod Kumar ◽  
Rajiv Ranjan Sinha ◽  
Md Jawed Akhtar ◽  
Avanish Kumar

The sacrum is a large triangular bone formed by fusion of five sacral vertebrae and wedged between two hip bones. Dimension of sacrum varies from region to region therefore morphometric study of sacrum in population of Bihar is important for proper fixation during orthopedic procedure in trauma patients. : The objectives of this study was to evaluate the morphometric parameters of sacrum so that a data can be generated from local population. M: The present study was done on 110 human sacra of known sex (62 male and 48 female) collected from department of Anatomy, IGIMS, Patna and also from other medical colleges of Bihar. Maximum length of sacrum, curved length of sacrum, maximum breadth of sacrum, antero-posterior diameter of the body of first sacral vertebra, transverse diameter of the body of first sacral vertebra and maximum length of articular surface of sacrum were measured. Mean value of sacral straight length were 104.55 cm in male and 94.66 cm in female, Curve length 112.03 cm in male and 103.98 cm in female, Width of sacrum 101.53 cm in male and 105.67 cm in female. Transverse diameter of body of 1st sacral vertebra were 46.53 cm and 40.85 cm in male and female respectively, antero-posterior diameter of body of 1st sacral vertebra were 29.89 cm and 27.73 cm in male and female respectively, Length of auricular surface were 56.08 cm and 54.77 cm respectively. Sacral index, curvature index, index of body of first sacral vertebra, corpora-basal index and auricular index were calculated. Morphometric study of sacrum in population of Bihar is important because dimension of sacrum varies from region to region and this is important for proper fixation during orthopedic procedure in trauma patients.

2021 ◽  
Vol 23 (1) ◽  
pp. 48-54
Author(s):  
Arun Dhakal ◽  
P Adhikari ◽  
N Ranjit ◽  
D Budhathoki

There is paucity in literature describing the morphology of sub-axial vertebra of the local population. Available studies are limited to the body, intervertebral disk, spinal canal and Torg’s ratio of the cervical vertebra. Therefore, the present study aims to document various morphological parameters of sub axial vertebra. Sixty-four dry sub-axial vertebrae of the Nepalese population were studied using Vernier Calipers calibrated to 0.1 mm accuracy. Paired parameters of pedicle, lamina, uncinate process, the distance of the apex of the uncinate process to intervertebral foramen and foramen transversarium were measured. Similarly, unpaired parameters including spinous process length, vertebral foramen anteroposterior width, vertebral foramen transverse diameter and Torg’s ratio were evaluated. Except the height of left lamina of C3 to C6 vertebrae, none of the parameters showed significant side differences. Significant higher values of C7 were noted against C3-C6 on vertebral body height, vertebral body anteroposterior diameter, spinous process length and vertebral foramen anteroposterior diameter. Population data of sub-axial vertebra available in literature showed mixed results with ours. Interestingly, our observations either compared to (lamina, uncinate process, anteroposterior diameter of spinal canal and Torg’s ratio) or were larger (Pedicle and spinous process) than the Indian study with pedicle axis length being largest among all the compared studies. The information of this study may be used as a reference database for our local setting and could be of value in preoperative planning and in designing implants.


2019 ◽  
pp. 1-4
Author(s):  
Devesh Kumar Sharma

BACKGROUND: Skull is the most complex osseous structure in the body. Foramen magnum (FM) is an important landmark of the base of the skull. Anteriorly on each side of FM oval occipital condyles are present. The occipital condyles project downwards to articulate with the superior articular facets on lateral masses of the atlas vertebra to form synovial atlanto-occipital joint. Understanding the anatomy of the occipital condyles is important for different approaches. OBJECTIVE: The present study aims to morphometric analysis of occipital condyles and foramen magnum and its importance in transcondylar approach. MATERIALAND METHODS: The present study was carried out on 75 dry human skulls of unknown age and sex from Rajasthan population from the department of Mahatma Gandhi Medical College Jaipur, Rajasthan. All the measurements were taken with the help of digital vernier calipers. RESULTS :The mean value of anterior intercondylar distance was 21.50mm and posterior intercondylar was 38.99mm. The mean anteroposterior diameter was 35.11±3.12mm ans transverse diameter was 29.35±3.48mm. CONCLUSION :The occipital condyles form the lateral limits of the cranio-vertebral junction. The configuration and orientation of the occipital condyles, as well as the location of the intracranial and extracranial orifices of hypoglossal canal may affect the lateral approaches to the craniovertebral junction


2017 ◽  
Vol 54 ◽  
pp. 112-119
Author(s):  
L. M. Khmelnychy

The estimation of the first-born cows of Ukrainian Black-and-White dairy breed by the exterior type in the leading breeding herds of Cherkassy region by the method of linear classification (n = 566) has been carried out. The results of the evaluated animals by the 100-score system indicate that within the group of traits, the average level of assessment is "good with the plus". The animals have been differed by the good development of group features characterizing the dairy type (82.4 score), body condition (83.5 score), limbs (82.8 score), udder (82.7 score) and overall score (82.8 score). The degree of development 18 descriptive traits of the exterior of cows, has been predicted by the method of linear classification, indicates their significant intraherd variability. Animals have the moderate height, deep body and angularity. The rump angle, the angle of hock joint and the teats length, according to the variability of scores in the range of 17.8–22.4%, have an average optimal development. The level of scores for the rear width (5.9 score), attachment of the fore (6.3 score) and the rear parts (6.0 score) of the udder testifies to their good development. The body structure of the cows-firstborn has a sufficient description of the type traits that determine their milk yield. At the present stage of selection and breeding work due to the use of bull-sires different origins and breeding value on the local population livestock with significant genotype diversity, the degree of influence each of the hereditary factors in the overall variability of linear features has a scientific and practical significance. In our studies, the force of influence conditional bloodiness of the Holstein mother's breed in the overall fraction of variability of linear type traits within the exterior complexes and the overall assessment takes a significant percentage - from 24.9 to 31.5 with a high degree of reliability according to Fischer's criterion. Among the descriptive traits, the proportion of influence the conditional bloodiness of mother, which is confirmed by high statistical confidence, ranges from 14.4 to 19.8%, and refers to the traits important for breeding. The level of coefficients of influence the father's breeding value in the total phenotypic variability for some of the linear traits is high and reliable. First of all it concerns group traits of the exterior, the development of which is determined by the pedigree value of father by 37.1–41.8%, and the overall assessment of type – by 46.6%. The coefficients of influence father's breeding value in most of the descriptive traits have high reliability (P < 0,001). The coefficients of the force of influence father, depending on the heredity of Holstein for the linear traits of almost the same level as his pedigree value. Since in this case the organized factor is purebreed Holstein and crossbreed bulls-sires of domestic selection, the positive role of Holstein heredity in improving the exterior type of cows has been traced realistically. The necessity of linear breeding, as an effective method in the system of dairy cattle breeding, has been substantiated by reliable values of the coefficients of the force of influence of father's line on the linear traits of offspring (3.4–29.5%). Despite the significant variability of coefficients of the force of influence on the linear traits, most of them have a high level of reliability within the evaluated body parts important for selection. The effect of cows belonging to the maternal line on the development of features of the body structure is insignificant and unreliable (5.3–9.2%). In the process of breeding aimed at improving cows of dairy herd by the exterior type, the pedigree value of parents has been assessed according to the method of linear classification of their daughters and their belonging to perspective genealogical formations.


1969 ◽  
Vol 62 (2) ◽  
pp. 367-384 ◽  
Author(s):  
A. M. Sackler ◽  
A. S. Weltman ◽  
R. Schwartz ◽  
P. Steinglass

ABSTRACT This report was designed to determine combined effects of maternal endocrine imbalances and abnormal behaviour due to prolonged isolation stress of female mice on the behaviour, developmental growth rate and endocrine function of their offspring. Sixty female albino mice averaging 19 g were divided equally into isolated and control groups. The isolated females were housed singly; control females were maintained in groups of 2 mice per cage. After observation of behavioural and physiological effects characteristic of isolation stress in the test mice, all isolated and control mice were mated after a 6½ month experimental, isolation period. No differences were observed in fertility and fecundity of the two groups of mothers. Analyses of developmental growth rates of the litters of the isolated versus control mothers showed significantly lower body weights in the test offspring at 3 and 4 weeks of age. The body weights of the female offspring remained significantly lower from the 4th to 11th weeks. The effects on the body weights of the male offspring declined and were no longer statistically significant at the 5th to 11 weeks. Locomotor activity at 4½ and 8 weeks of age was markedly or significantly higher in the male and female mice from isolated mothers. Tail-blood samples taken prior to autopsy at 5 and 11 weeks of age revealed significant decreases in the total leukocyte and eosinophil counts of both sexes. At the two ages, the absolute and relative spleen and thymus weights of the male and female offspring were markedly and/or significantly lower than the values observed in counterpart young from control females. Significant decreases were also observed in the absolute gonadal organ weights of both sexes at 11 weeks of age. The various data indicated inhibited growth rates, heightened locomotor activity and evasiveness, as well as evidence of increased adrenocortical function in the offspring from test mothers. The gonadal weight decreases suggested retarded gonadal development. Further studies using split-litter techniques are required to differentiate the effects of prenatal endocrine imbalances versus postnatal maternal influence (i. e., nursing care) on the offspring.


2012 ◽  
Vol 6 (1) ◽  
pp. 250-254 ◽  
Author(s):  
DS Evangelopoulos ◽  
P Kontovazenitis ◽  
S Kouris ◽  
X Zlatidou ◽  
LM Benneker ◽  
...  

Background: Detailed knowledge of cervical canal and transverse foramens’ morphometry is critical for understanding the pathology of certain diseases and for proper preoperative planning. Lateral x-rays do not provide the necessary accuracy. A retrospective morphometric study of the cervical canal was performed at the authors’ institution to measure mean dimensions of sagittal canal diameter (SCD), right and left transverse foramens’ sagittal (SFD) and transverse (TFD) diameters and minimum distance between spinal canal and transverse foramens (dSC-TF) for each level of the cervical spine from C1-C7, using computerized tomographic scans, in 100 patients from the archives of the Emergency Room. Results: Significant differences for SCD were detected between C1 and the other levels of the cervical spine for both male and female patients. For the transverse foramen, significant differences in sagittal diameters were detected at C3, C4, C5 levels. For transverse diameters, significant differences at C3 and C4 levels. A significant difference of the distance between the transverse spinal foramen and the cervical canal was measured between left and right side at the level of C3. This difference was equally observed to male and female subjects. Conclusion: CT scan can replace older conventional radiography techniques by providing more accurate measurements on anatomical elements of the cervical spine that could facilitate diagnosis and preoperative planning, thus avoiding possible trauma to the vertebral arteries during tissue dissection and instrument application.


2015 ◽  
Vol 14 (3) ◽  
pp. 210-213
Author(s):  
Carlos Alexandre Botelho do Amaral ◽  
Edgar Taira Nakagawa ◽  
Leonardo Ternis Ferreira ◽  
José Sergio Franco ◽  
Robinson Esteves Santos Pires ◽  
...  

Objective:To evaluate the bone area of the odontoid process through computed tomography and its relation with the area of one and two screws in the male and female subjects.Methods:188 CT scans of adults were analyzed. The isthmus area was selected and the transverse diameter was measured at 1.2 mm from the base of odontoid.Results:After placement of a screw, the odontoid area remains with 82% of free bone for both men and women. With two screws, 45.6% of women, had a free bone area of the odontoid process between 50% and 75% and 54.4% were above 75%. 26.6% men had percentage from 50% to 75% of free bone area and 73.4% above 75% (p=0.07). After the placement of two screws, the bone area was, in average, 77.3% in men and 75.4% in women. Using the Student t-test, the differences between the average of percentage of free bone area in men and women are significantly lower in women (p=0.0012).Conclusion:The pre-operative planning through CT can help to choose the number of screws in the odontoid process. The choice should be particularly careful when using two screws in women.


2020 ◽  
Vol 11 (3) ◽  
pp. 4487-4491
Author(s):  
Kirti Chaudhary ◽  
Amey Dhatrak ◽  
Brij Raj Singh ◽  
Ujwal Gajbe

The cardiovascular system consists of a pump represented by the heart and blood vessels, which provide the route by which blood circulates to all parts of the body. William Harvey, in the 17th century, discovered that blood is pumped away from the heart, but it all returns to the heart after circulating in the body. A right ventricular function can be compromised by pressure or stress, often secondary to the right heart valve or muscle pathology. The valves maintain unidirectional flow and permit increased pressure to develop in the chambers. The tricuspid valve consists of three tissue flaps. It separates the right atria and the right ventricle. To measure morphometric measurements of an individual leaflet of the tricuspid valve of cadaveric human hearts. The material for the present study comprised of 50 formalin-fixed adult human hearts (35 males and 15 females) which were obtained from the Department of Anatomy from various medical colleges in Maharashtra. Statistical significant difference was found for the height of anterior and posterior leaflets between male and female hearts. The length of the septal leaflet was also found to be statistically significant between male and female hearts. The study will be helpful for cardiac surgeons in providing data for tricuspid valve complex, leaflets, cords and papillary muscles.


2003 ◽  
Vol 46 (3) ◽  
pp. 285-292
Author(s):  
G. Andrássy-Baka ◽  
R. Romvári ◽  
Z. Sütő ◽  
A. Szabó ◽  
P. Horn

Abstract. Male and female BUT Big 6 and Bronze turkeys (type 1967) kept in a gene reserve were in vivoL investigated with non-invasive high resolution computerized tomography by means of a sipral CT scanner. The imaging procedure was carried out at the ages of 5, 12, 16 and 21 weeks on two turkeys, in both sexes. All animals were kept under intensive conditions according to the demands of the conformation and the body weight of the relevant group average. On the basis of 30–50 scans gathered from each bird during the scanning procedure the volumetric measurement of the total body muscle content was performed. These values were at the 5th week 0.9 and 0.8 vs. 0.3 and 0.2 dm3 in BUT male and female vs. Bronze male and female birds. At the 21st week the respective values were: 12.65 and 7.66 vs. 3.60 and 2.28 dm3. The total body fat content was characterised by the so called "fat index", a value independent of the live weight. This indices were at the 21st week: 0.12 and 0.20 vs. 0.12 and 0.13 following the above order. The investigation of the tissue development in the body was carried out by means of 3D histograms. The morphologic properties of the breast muscles were compared based on real 3D reconstructed images at the age of 21 weeks where the major differences concerned the m. pectoralis superficialis. The applied imaging methods are well applicable to describe the anatomic and body compositional differences in the excessively different genotypes.


2021 ◽  
Vol 29 (1) ◽  
pp. 51
Author(s):  
Rafik Belabbas ◽  
Maria de la Luz García ◽  
Hacina AinBaziz ◽  
Ali Berbar ◽  
Maria José Argente

<p>The aim of this study was to estimate the limiting litter size components in rabbit females from a Synthetic line (n=32) and a Local population (n=34). Ovulation rate, number of implanted and live embryos were counted by laparoscopy at 12 d after mating. Prolificacy (total newborn, number born alive and mortality) and embryonic, foetal and prenatal survival at day of birth of the 3<sup>rd</sup> gestation were measured. The analysed traits were body weight of the female at mating, ovulation rate, implanted, live and resorbed embryos, embryonic, foetal and prenatal survival, as well as total newborn, number born alive and mortality at birth. Synthetic line females had a higher ovulation rate compared to the Local population (11.03±0.23 vs. 8.41±0.23 corpora lutea; <em>P</em>&lt;0.0001). Synthetic line displayed a higher number of implanted embryos (10.00±0.25 vs. 7.85±0.25 embryos; <em>P</em>&lt;0.0001). No difference was found between groups for number of resorbed embryos. Similar embryonic, foetal and prenatal survival rates were reported between the Synthetic line and the Local population. Additionally, total newborn was higher in the Synthetic line than in the Local population (+1.46 kits; <em>P</em>&lt;0.05). A principal components analysis was performed. The first four principal components (PC) explained more than 90% of the total variation in both lines. Total newborn, number born alive and live embryos were the main variables defining the 1<sup>st</sup> PC. Resorbed embryos and foetal survival were located in the 2<sup>nd</sup> PC. Ovulation rate and embryonic survival were the predominant variables defining the 3<sup>rd</sup> PC. The body weight of females was located in the 4<sup>th</sup> PC. The phenotypic correlation between total newborn and its components were high and positive in both lines, except for ovulation rate and total newborn, where it was moderate in Synthetic line. In conclusion, the females from Synthetic line have a higher total newborn than those from Local population, as a consequence of a higher number of released oocytes and embryos that successfully reach implantation. However, a higher uterine crowding in Synthetic line seems to limit survival of foetuses that reach term of gestation, while ovulation rate is the principal limiting factor of total newborn in Local population.</p>


2019 ◽  
pp. 1-3
Author(s):  
Darwin Firmansyah Siregar ◽  
Frank Bietra Buchari ◽  
Utama Abdi Tarigan ◽  
Aznan Lelo

Background: Facial Injury Severity Severity Score (FISS) has been used to assess the severity of facial injuries. However, FISS scores as a useful predictor of length of stay and changes between FISS scores and injuries to other parts of the body have not evaluated. In this study, we want to know the relationship between FISS score as the clinical assessment of maxillofacial trauma with the length of stay, the need for surgery, and the involvement of other specialist elds. Method: This research was conducted using analytical research through a retrospective approach by looking at the medical records of patients who suffered maxillofacial trauma at H. Adam Malik General Hospital Medan from June to August 2019. Result : From a total of 43 patients included in the study, there were 22 mandibular fractures, with mandibular angulus (29.0%), parasymphysis (22.4%), and mandibular corpus (21.5%). Thirty subjects (69.8%) needed surgery, and xation of the fracture and subjects without intervention were 13 (30.2%). Patients who needed surgical intervention, the average time needed for hospitalization was 10.98 + 7.72 days (p = 0.007). The most collaboration found with neurosurgeons specialists, 39.53% of subjects who performed the surgery. A total of 55.8% of surgeries performed by a single operator from the plastic surgery department. Relationship between the length of stay with FISS, obtained for FISS> 3 (OR 14.37) (p = 0.01), meaning that patients with FISS> 3 are likely to stay longer for 14 times. Subsequent results related to the need for surgery obtained signicant results (OR = 8.26, p = 0.026). signicant (p = 0.059). Conclusion: A FISS score signicantly affects the length of stay for a maxillofacial trauma patient. FISS score also affects the involvement of other specialists in maxillofacial trauma patients but not statistically signicant.


Sign in / Sign up

Export Citation Format

Share Document