scholarly journals Study of Atkinson cycle in two-stroke diesel engine with opposed pistons

2019 ◽  
Vol 178 (3) ◽  
pp. 121-128
Author(s):  
Wladyslaw MITIANIEC
Keyword(s):  
Diesel Engine ◽  
Power Plant ◽  
Model Simulation ◽  
Combustion Process ◽  
Chemical Species ◽  
Total Efficiency ◽  
Cfd Modelling ◽  
Compression Process ◽  
Atkinson Cycle ◽  
Working Parameters

The paper presents possibilities of change working parameters of two-stroke diesel engine with opposed pistons. Obtaining of higher engine efficiency is realized by applying of Atkinson cycle. Modification of scavenging process by changing pistons position connecting with two crankshafts enables asymmetrical scavenge timing. Decreasing of shorter time of closing exhaust ports before compression process and longer expansion process give higher engine work and with high charging ratio increases engine power. These types of engines are recently recommended for power plant stations. The paper includes full analysis of engine work with scavenge and combus-tion processes for different timing phases based on geometry of the CI Leyland L60 engine by using of CFD modelling and own 0D model. Simulation tests indicate a high scavenge efficiency, good penetration of injected fuel and fast combustion process. The work contains figures of pressure, temperature traces and emission of main chemical species in exhaust gases with comparison of engine works for different timing phases. Atkinson cycle in two-cycle work of engine and full combustion process enables to achieve high total efficiency. The study is an input for realization of such processes in a future of power plant engines with different fuelling systems.

CFD Modelling of the Effects of Injection Timing on the Combustion Process and Emissions in an HSDI Diesel Engine

2012 ◽  
Author(s):  
Raouf Mobasheri ◽  
Zhijun Peng
Keyword(s):  
Diesel Engine ◽  
High Speed ◽  
Cfd Simulation ◽  
Direct Injection ◽  
Combustion Process ◽  
Injection Timing ◽  
Cfd Modelling ◽  
Combustion Modeling ◽  
Pressure Trace ◽  
Hsdi Diesel Engine

High-Speed Direct Injection (HSDI) diesel engines are increasingly used in automotive applications due to superior fuel economy. An advanced CFD simulation has been carried out to analyze the effect of injection timing on combustion process and emission characteristics in a four valves 2.0L Ford diesel engine. The calculation was performed from intake valve closing (IVC) to exhaust valve opening (EVO) at constant speed of 1600 rpm. Since the work was concentrated on the spray injection, mixture formation and combustion process, only a 60° sector mesh was employed for the calculations. For combustion modeling, an improved version of the Coherent Flame Model (ECFM-3Z) has been applied accompanied with advanced models for emission modeling. The results of simulation were compared against experimental data. Good agreement of calculated and measured in-cylinder pressure trace and pollutant formation trends were observed for all investigated operating points. In addition, the results showed that the current CFD model can be applied as a beneficial tool for analyzing the parameters of the diesel combustion under HSDI operating condition.

scholarly journals Application of Alcohols to Dual - Fuel Feeding the Spark-Ignition and Self-Ignition Engines

2014 ◽  
Vol 21 (3) ◽  
pp. 86-94 ◽  
Author(s):  
Zdzisław Stelmasiak
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Combustion Process ◽  
Spark Ignition ◽  
Diesel Oil ◽  
Dual Fuel ◽  
Total Efficiency ◽  
Exhaust Gas ◽  
Operational Parameters ◽  
Point Injection

Abstract This paper concerns analysis of possible use of alcohols for the feeding of self - ignition and spark-ignition engines operating in a dual- fuel mode, i.e. simultaneously combusting alcohol and diesel oil or alcohol and petrol. Issues associated with the requirements for application of bio-fuels were presented with taking into account National Index Targets, bio-ethanol production methods and dynamics of its production worldwide and in Poland. Te considerations are illustrated by results of the tests on spark- ignition and self- ignition engines fed with two fuels: petrol and methanol or diesel oil and methanol, respectively. Te tests were carried out on a 1100 MPI Fiat four- cylinder engine with multi-point injection and a prototype collector fitted with additional injectors in each cylinder. Te other tested engine was a SW 680 six- cylinder direct- injection diesel engine. Influence of a methanol addition on basic operational parameters of the engines and exhaust gas toxicity were analyzed. Te tests showed a favourable influence of methanol on combustion process of traditional fuels and on some operational parameters of engines. An addition of methanol resulted in a distinct rise of total efficiency of both types of engines at maintained output parameters (maximum power and torque). In the same time a radical drop in content of hydrocarbons and nitrogen oxides in exhaust gas was observed at high shares of methanol in feeding dose of ZI (petrol) engine, and 2-3 fold lower smokiness in case of ZS (diesel) engine. Among unfavourable phenomena, a rather insignificant rise of CO and NOx content for ZI engine, and THC and NOx - for ZS engine, should be numbered. It requires to carry out further research on optimum control parameters of the engines. Conclusions drawn from this work may be used for implementation of bio-fuels to feeding the combustion engines.

Research on Combustion Process and NOx Formation in a Marine Diesel Engine

2011 ◽  
Vol 214 ◽  
pp. 628-632
Author(s):  
Song Zhou ◽  
Yuan Qing Zhu
Keyword(s):  
Diesel Engine ◽  
Model Simulation ◽  
Combustion Process ◽  
Three Dimensional ◽  
Combustion Model ◽  
Marine Diesel Engine ◽  
Nox Formation ◽  
Transient Combustion ◽  
Marine Diesel ◽  
Simulation Results

This paper presents the simulation results of histories of pressure, temperature and NO concentrations as well as combustion process and NOx formation in a marine diesel engine. The simulation was done within a full engine cycle with a three-dimensional, transient combustion model including a more accurate NO formation model. Simulation results were verified by data obtained from benchmark tests and further analyses of distributions of pollutants were carried out in this paper. Conclusions from simulation about engine combustion and NOx formation have been finally achieved.

Comparative analysis on the effects of diesel particulate filter and selective catalytic reduction systems on a wide spectrum of chemical species emissions

2018 ◽  
Author(s):  
Z. Gerald Liu ◽  
Devin R. Berg ◽  
Thaddeus A. Swor ◽  
James J. Schauer‡
Keyword(s):  
Diesel Engine ◽  
Selective Catalytic Reduction ◽  
Diesel Particulate Filter ◽  
Catalytic Reduction ◽  
Wide Spectrum ◽  
Chemical Species ◽  
Pollutant Emissions ◽  
Particulate Filter ◽  
Diesel Particulate ◽  
Aftertreatment Systems

Two methods, diesel particulate filter (DPF) and selective catalytic reduction (SCR) systems, for controlling diesel emissions have become widely used, either independently or together, for meeting increasingly stringent emissions regulations world-wide. Each of these systems is designed for the reduction of primary pollutant emissions including particulate matter (PM) for the DPF and nitrogen oxides (NOx) for the SCR. However, there have been growing concerns regarding the secondary reactions that these aftertreatment systems may promote involving unregulated species emissions. This study was performed to gain an understanding of the effects that these aftertreatment systems may have on the emission levels of a wide spectrum of chemical species found in diesel engine exhaust. Samples were extracted using a source dilution sampling system designed to collect exhaust samples representative of real-world emissions. Testing was conducted on a heavy-duty diesel engine with no aftertreatment devices to establish a baseline measurement and also on the same engine equipped first with a DPF system and then a SCR system. Each of the samples was analyzed for a wide variety of chemical species, including elemental and organic carbon, metals, ions, n-alkanes, aldehydes, and polycyclic aromatic hydrocarbons, in addition to the primary pollutants, due to the potential risks they pose to the environment and public health. The results show that the DPF and SCR systems were capable of substantially reducing PM and NOx emissions, respectively. Further, each of the systems significantly reduced the emission levels of the unregulated chemical species, while the notable formation of new chemical species was not observed. It is expected that a combination of the two systems in some future engine applications would reduce both primary and secondary emissions significantly.

scholarly journals Combustion Optimization for Coal Fired Power Plant Boilers Based on Improved Distributed ELM and Distributed PSO

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1036 ◽  
Author(s):  
Xinying Xu ◽  
Qi Chen ◽  
Mifeng Ren ◽  
Lan Cheng ◽  
Jun Xie
Keyword(s):  
Power Plant ◽  
Combustion Process ◽  
Optimization Method ◽  
Combustion Efficiency ◽  
Pollutant Emissions ◽  
Combustion Model ◽  
Nox Emissions ◽  
Coupling Characteristics ◽  
Learning Machine ◽  
Combustion Optimization

Increasing the combustion efficiency of power plant boilers and reducing pollutant emissions are important for energy conservation and environmental protection. The power plant boiler combustion process is a complex multi-input/multi-output system, with a high degree of nonlinearity and strong coupling characteristics. It is necessary to optimize the boiler combustion model by means of artificial intelligence methods. However, the traditional intelligent algorithms cannot deal effectively with the massive and high dimensional power station data. In this paper, a distributed combustion optimization method for boilers is proposed. The MapReduce programming framework is used to parallelize the proposed algorithm model and improve its ability to deal with big data. An improved distributed extreme learning machine is used to establish the combustion system model aiming at boiler combustion efficiency and NOx emission. The distributed particle swarm optimization algorithm based on MapReduce is used to optimize the input parameters of boiler combustion model, and weighted coefficient method is used to solve the multi-objective optimization problem (boiler combustion efficiency and NOx emissions). According to the experimental analysis, the results show that the method can optimize the boiler combustion efficiency and NOx emissions by combining different weight coefficients as needed.

scholarly journals The Effect of RME-1-Butanol Blends on Combustion, Performance and Emission of a Direct Injection Diesel Engine

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2941
Author(s):  
Wojciech Tutak ◽  
Arkadiusz Jamrozik ◽  
Karol Grab-Rogaliński
Keyword(s):  
Diesel Engine ◽  
Heat Release ◽  
Direct Injection ◽  
Specific Energy Consumption ◽  
Combustion Process ◽  
Constant Load ◽  
Combustion Stability ◽  
Performance And Emission ◽  
Energy Share ◽  
The Stability

The main objective of this study was assessment of the performance, emissions and combustion characteristics of a diesel engine using RME–1-butanol blends. In assessing the combustion process, great importance was placed on evaluating the stability of this process. Not only were the typical COVIMEP indicators assessed, but also the non-burnability of the characteristic combustion stages: ignition delay, time of 50% heat release and the end of combustion. The evaluation of the combustion process based on the analysis of heat release. The tests carried out on a 1-cylinder diesel engine operating at a constant load. Research and evaluation of the combustion process of a mixture of RME and 1-butanol carried out for the entire range of shares of both fuels up to 90% of 1-butanol energetic fraction. The participation of butanol in combustion process with RME increased the in-cylinder peak pressure and the heat release rate. With the increase in the share of butanol there was noted a decrease in specific energy consumption and an increase in engine efficiency. The share of butanol improved the combustion stability. There was also an increase in NOx emissions and decrease in CO and soot emissions. The engine can be power by blend up to 80% energy share of butanol.

On the suitable superstructure thermoeconomic optimization of a waste heat recovery system for a Brazilian diesel engine power plant

2021 ◽  
Vol 234 ◽  
pp. 113947
Author(s):  
Alexandre Persuhn Morawski ◽  
Leonardo Rodrigues de Araújo ◽  
Manuel Salazar Schiaffino ◽  
Renan Cristofori de Oliveira ◽  
André Chun ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Power Plant ◽  
Heat Recovery ◽  
Waste Heat Recovery ◽  
Waste Heat ◽  
Waste Heat Recovery System ◽  
Recovery System ◽  
Heat Recovery System ◽  
Engine Power

scholarly journals Study on the Effect of the Nozzle Diameter and Swirl Ratio on the Combustion Process for an Opposed-piston Two-stroke Diesel Engine

2014 ◽  
Vol 61 ◽  
pp. 542-546 ◽  
Author(s):  
Zhenyu Zhang ◽  
Changlu Zhao ◽  
Zhaoyi Xie ◽  
Fujun Zhang ◽  
Zhenfeng Zhao
Keyword(s):  
Diesel Engine ◽  
Combustion Process ◽  
Nozzle Diameter ◽  
Swirl Ratio

Analysis of chemical effects on reflected-shock flow fields in combustible gas

1985 ◽  
Vol 160 ◽  
pp. 29-45 ◽  
Author(s):  
Yasunari Takano ◽  
Teruaki Akamatsu
Keyword(s):  
Heat Release ◽  
Chemical Reactions ◽  
Induction Time ◽  
Combustion Process ◽  
Chemical Species ◽  
Flow Fields ◽  
Rate Equations ◽  
Reflected Shock ◽  
Combustible Gas ◽  
Analytical Results

This paper analyses effects of chemical reactions on reflected-shock flow fields in shock tubes. The method of linearized characteristics is applied to analyse gasdynamic disturbances due to chemical reactions. The analysis treats cases where combustible gas is highly diluted in inert gas, and assumes that flows are one-dimensional and that upstream flows in front of the reflected-shock waves are in the frozen state. The perturbed gasdynamic properties in the reflected-shock flow fields are shown to be expressible mainly in terms of a heat-release function for combustion process. In particular, simple relations are obtained between the heat-release function and the physical properties at the end wall of a shock tube. As numerical examples of the analysis, the present formulation is applied to calculate gasdynamic properties in the reflected-shock region in a H2–O2–Ar mixture. Procedures are demonstrated for calculation of the heat-release function by numerically integrating rate equations for chemical species. The analytical results are compared with rigorous solutions obtained numerically by use of a finite-difference method. It is shown that the formulation can afford exact solutions in cases where chemical behaviours are not essentially affected by gasdynamic behaviours. When the induction time of the combustion process is reduced to some extent owing to gasdynamic disturbances, some discrepancies appear between analytical results and rigorous solutions. An estimate is made of the induction-time reduction, and a condition is written down for applicability of the analysis.

Sign in / Sign up

Export Citation Format

Share Document