scholarly journals Determination of sources of sulfur dioxide in confectionery

2019 ◽  
Vol 80 (4) ◽  
pp. 203-208
Author(s):  
N. B. Kondratyev ◽  
E. V. Kazantsev ◽  
M. V. Osipov ◽  
O. S. Rudenko ◽  
E. N. Krylova
Keyword(s):  
Sulfur Dioxide ◽  
Raw Materials ◽  
Customs Union ◽  
White Sand ◽  
Wide Range ◽  
Confectionery Products ◽  
Definition Of ◽  
The Impact ◽  
Technological Methods

Sulfur dioxide is used to ensure the safety of fruit raw materials and semi-finished products used for the production of confectionery. This preservative has allergenic properties. In accordance with the Technical Regulations of the Customs Union TR CU 022/2011 "Food products in terms of their labeling" the content of sulfur dioxide must be specified when labeling confectionery products, if its content exceeds 10 mg per kg. The definition of this preservative in raw materials, semi-finished products and confectionery in accordance with the current GOST 26811 “Confectionery. The iodometric method for determining the mass fraction of total sulfuric acid is often difficult because of the complexity of confectionery products, the formation of intensive staining of the solutions under study and the ability of sulfur dioxide to react with other components of the objects under study. Therefore, the task of developing methods with the optimization of the sample preparation stage of the samples under study, which allow one to fully determine sulfur dioxide in confectionery products, semi-finished products and raw materials, is relevant. The purpose of this work was to develop methods for determining sulfur dioxide in raw materials, semi-finished products and various names of confectionery products, as well as assessing the impact of these types of raw materials and semi-finished products on the content of sulfur dioxide in confectionery products. The results showed that sulfur dioxide is present in many raw materials. In mg per 1 kg of sugar in white sand from 1 to 9, molasses from 25 to 52, wheat flour from 9 to 15, starch from 3 to 17. In fruit raw materials from 5 to 545 mg per kg. In confectionery: marshmallow and marshmallow from 8 to 29, gingerbread from 6 to 25, biscuits from 0 to 16, chocolate from 8 to 13. Based on the data obtained, it can be concluded that the content of sulfur dioxide in raw materials and semi-finished confectionery products is a very wide range, which makes it necessary to control the quality of all raw materials entering the production. Sulfur dioxide, used as a preservative for fruit raw materials, can significantly increase the content of this allergen in confectionery made using such raw materials. Ensuring the level of sulfur dioxide less than 10 mg / kg is achieved using raw materials with low content of sulfur dioxide and technological methods.

scholarly journals Understanding the Future Impacts of Electric Vehicles—An Analysis of Multiple Factors That Influence the Market

Vehicles ◽  
2021 ◽  
Vol 3 (4) ◽  
pp. 851-871
Author(s):  
Jonathan Wellings ◽  
David Greenwood ◽  
Stuart R. Coles
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Ethical Issues ◽  
Raw Materials ◽  
New Technology ◽  
Vast Number ◽  
Wide Range ◽  
Key Issues ◽  
The Impact ◽  
Vehicle Market

The electric vehicle market is an increasingly important aspect of the automotive industry. However, as a relatively new technology, several issues remain present within the industry. An analysis is utilised to examine these issues, along with how they affect the industry and how they can be tackled. Several key issues that affect the electric vehicle market, as well as how efforts to address these issues influence the market, are identified. The analysis also includes the examination of ethical issues, with the issues that arise from the production of raw materials for electric vehicles. The analysis and examination of ethical issues display a wide range of problems in the industry. However, it did highlight the efforts being made to lessen the effect of these problems by various groups, such as regulation by EU and US governing bodies on the materials mined. From this analysis, this paper identifies that many of the other factors examined are directly or indirectly influenced by political and economic factors, also examined in this review. This highlights the impact that governing bodies and businesses have on a vast number of issues that are present within the market and how they can resolve the harmful factors examined.

scholarly journals The error of determination of toxicity

1927 ◽  
Vol 101 (712) ◽  
pp. 483-514 ◽  
Keyword(s):  
Intravenous Injection ◽  
Lethal Dose ◽  
Unit Weight ◽  
Minimal Effective Dose ◽  
Quantitative Expression ◽  
Wide Range ◽  
Cocaine Hydrochloride ◽  
State Of Affairs ◽  
Definition Of

The determination of toxicity is usually given quantitative expression by the statement of a minimal lethal dose. The common use of this expression in the literature of the subject would logically involve the assumptions that there is a dose, for any given poison, which is only just sufficient to kill all or most of the animals of a given species, and that doses very little smaller would not kill any animals of that species. Any worker, however, accustomed to estimations of toxicity, knows that these assumptions do not represent the truth. How widely different is the real state of affairs, however, is not, I think, sufficiently recognised. The fact that the “ minimal lethal dose,” whether calculated for unit weight, or for surface area, or on any other basis, varies widely for different species has, perhaps, led to the looseness of its definition for any one species. For the accurate standardisation, by biological methods, of drugs which are not available in chemically pure form, it is essential to establish a more accurate definition of such terms as “minimal lethal dose,” “minimal effective dose,” etc. Fig. 1 gives the results of the injection of four poisons into animals. The abscissæ are proportional to the doses injected, the scale obviously differing for the different drugs, and the ordinates give the percentage mortality for each dose injected. The number attached to each observed point represents the number of animals injected for its determination. The curves represent percentage mortalities produced by the subcutaneous injection of tincture of digitalis into frogs, by the intravenous injection of cocaine hydrochloride into mice (see also fig. 2 and Table I), by the intravenous injection of echitamine into mice, and by the injection of dysentery toxin into mice, the data for the last being taken from O’Brien, Sudmersen and Runge (1924). A similar curve is given later (fig. 7) for the percentage of convulsions produced in mice by increasing doses of insulin, the data being obtained by the use of large numbers of animals. Shackell (1925) has published a number of similar curves, relating percentage mortalities to varying doses of different poisons, in a wide range of species. It is suggested that the curve expressing the percentage of mortality, or of some other limiting biological effect, produced by varying doses of a drug on animals of a certain species, shall be called the “ characteristic” for that particular drug, effect and species. Thus, the curve relating the percentage of convulsions produced in mice to varying doses of insulin, would be termed the characteristic for the production of convulsions in mice by insulin.

DETERMINATION OF THE SENSITIVITY OF THE MICROBIOLOGICAL EXPRESS METHOD FOR DETECTING FLUOROQUINOLONE ANTIBIOTICS IN RAW MATERIALS OF MEAT USING THE TEST CULTURE BACILLUS STEAROTHERMOPHILUS

2021 ◽  
Vol 1 (3) ◽  
pp. 249-254
Author(s):  
G.M. Goryainova ◽  
◽  
L.V. Arsenyeva ◽  
E.A. Denisova ◽  
◽  
...  
Keyword(s):  
Bacillus Stearothermophilus ◽  
Raw Materials ◽  
Detection Limits ◽  
Animal Husbandry ◽  
Express Method ◽  
Antimicrobial Drugs ◽  
Test Culture ◽  
Fluoroquinolone Antibiotics ◽  
Wide Range

The article presents the results obtained during experiments to determine the sensitivity of the method according to GOST R 55481-2013 to antibiotics from the group of fluoroquinolones. GOST provides detection limits for such antibiotics as augmentin – 25.0 mcg/kg, benzylpenicillin – 4.0 mcg/kg, doxycycline – 10.0 mcg/ kg, cefazolin – 25.0 mcg/kg. Today, we are familiar with a wide range of different antimicrobial drugs used in animal husbandry, including an extensive group of drugs such as levofloxacin, norfloxacin, ofloxacin, marbocin, marfloxin, pefloxacin, ciprofloxacin, and others related to fluoroquinolones. We experimentally determined the sensitivity parameters for enrofloxacin – 24 mcg/l, levofloxacin – 26 mcg/l, ciprofloxacin – 24 mcg/l, marbofloxacin – 25 mcg/l.

scholarly journals Sulfur dioxide layer height retrieval from Sentinel-5 Precursor/TROPOMI using FP_ILM

2019 ◽  
Vol 12 (10) ◽  
pp. 5503-5517 ◽  
Author(s):  
Pascal Hedelt ◽  
Dmitry S. Efremenko ◽  
Diego G. Loyola ◽  
Robert Spurr ◽  
Lieven Clarisse
Keyword(s):  
Sulfur Dioxide ◽  
Accurate Determination ◽  
Volcanic Eruptions ◽  
Critical Parameters ◽  
Layer Height ◽  
Learning Machine ◽  
The Impact ◽  
First Time ◽  
Better Than

Abstract. The accurate determination of the location, height, and loading of sulfur dioxide (SO2) plumes emitted by volcanic eruptions is essential for aviation safety. The SO2 layer height is also one of the most critical parameters with respect to determining the impact on the climate. Retrievals of SO2 plume height have been carried out using satellite UV backscatter measurements, but, until now, such algorithms are very time-consuming. We have developed an extremely fast yet accurate SO2 layer height retrieval using the Full-Physics Inverse Learning Machine (FP_ILM) algorithm. This is the first time the algorithm has been applied to measurements from the TROPOMI instrument onboard the Sentinel-5 Precursor platform. In this paper, we demonstrate the ability of the FP_ILM algorithm to retrieve SO2 plume layer heights in near-real-time applications with an accuracy of better than 2 km for SO2 total columns larger than 20 DU. We present SO2 layer height results for the volcanic eruptions of Sinabung in February 2018, Sierra Negra in June 2018, and Raikoke in June 2019, observed by TROPOMI.

scholarly journals Ecological conditions affecting mycotoxin production in cereals: a review

2013 ◽  
Vol 58 (No. 8) ◽  
pp. 405-411 ◽  
Author(s):  
JM Milani
Keyword(s):  
Secondary Metabolites ◽  
Water Availability ◽  
Raw Materials ◽  
Mycotoxin Production ◽  
Ecological Conditions ◽  
Post Harvest ◽  
Critical Control Points ◽  
Wide Range ◽  
Available Information ◽  
The Impact

Spoilage fungi are ubiquitous contaminants of cereals, pre- and post-harvest. These fungi can produce a wide range of secondary metabolites under ecological conditions which are conducive for growth. However, some of these secondary metabolites are toxic and have a significant impact if they enter the production and animal food chains. Prevention of mycotoxin contamination of feed and food raw materials is now considered more important than subsequent cure. The key ecological determinants pre- and post-harvest are water availability and temperature (climate). Accurate information is therefore needed on the impact of an association between these key factors, and it is necessary to understand which are marginal and which critical for germination and toxin production. There have only been a few studies where attempts have been made to integrate the available information on these factors in relation to different raw materials for feed and food processing, especially cereals. This review will examine the available information on the main climatic factors, i.e., water availability and temperature affecting mycotoxin production such as, aflatoxins, ochratoxins, fumonisins, zearalenone, deoxynivalenol and citrinin. This information is crucial for accurately focusing and monitoring key critical control points in the feed and food chain to optimise prevention strategies.  

The impact of macroeconomic uncertainty on international commodity prices

2017 ◽  
Vol 7 (2) ◽  
pp. 163-184 ◽  
Author(s):  
Xiaofen Tan ◽  
Yongjiao Ma
Keyword(s):  
Raw Materials ◽  
Commodity Prices ◽  
Precious Metals ◽  
Commodity Price ◽  
Content Type ◽  
Vector Autoregressive ◽  
Macroeconomic Uncertainty ◽  
Wide Range ◽  
The Impact ◽  
Low Uncertainty

Purpose The purpose of this paper is to empirically analyze the impact of macroeconomic uncertainty on a large sample of 19 commodity markets. Design/methodology/approach The authors rely on Jurado et al.’s (2015) measure of macroeconomic uncertainty based on a wide range of monthly macroeconomic and financial indicators and estimate a threshold VAR model to assess whether the impact of macroeconomic uncertainty on commodity prices differs under the high- or low-uncertainty state. Findings The findings show that positive macroeconomic uncertainty shocks affect commodity prices returns negatively on average and the impact of macroeconomic uncertainty is generally higher in high-uncertainty states compared with low-uncertainty states. Besides, although the safe-haven role of precious metals is confirmed, energy and industrial markets are more sensitive to short-run and long-run macroeconomic uncertainty, respectively. Research limitations/implications The findings in this study suggest that commodity prices reflect not only the level of economic fundamental but also the volatility of economic fundamental. Originality/value This study empirically analyzes and verifies the influence of macroeconomic uncertainty not only on oil prices but also on four groups of 19 raw materials. As for the methodological issues, the authors rely on a structural threshold vector autoregressive specification for modeling commodity price returns to account for potentially different effects depending on the macroeconomic uncertainty states.

scholarly journals Secret of radiation protection and anti-static clothing

2018 ◽  
Vol 1 (1) ◽  
Author(s):  
Junxiu Zhang ◽  
Haiyang Tang ◽  
Shiguo Chen
Keyword(s):  
Electromagnetic Radiation ◽  
Radiation Protection ◽  
Static Electricity ◽  
Basic Principles ◽  
Daily Lives ◽  
Specific Analysis ◽  
Wide Range ◽  
Working Principle ◽  
Definition Of ◽  
The Impact

In the current era, electromagnetic radiation is everywhere. Every day electromagnetic radiation and static electricity caused by a variety of hazards. So, anti-electromagnetic radiation and anti-static awareness gradually enjoys popular support, more attention are gained by people on the anti-electromagnetic radiation and anti-static. This caused radiation protection and anti-static clothing industry’s rise by the day. Radiation protection and anti-static clothing will enter various households to provide a certain amount of protection to the people's health. We discuss two parts in this paper, specifically from the effects of the electromagnetic radiation and electrostatic effects which started on radiation clothing and anti-static clothing. The main contents of this paper are as follows: The first part of the definition of electromagnetic radiation and its brief introduction, while explaining the types of electromagnetic radiation and electromagnetic radiation sources in daily lives, followed by the emphasis of serious harms on electromagnetic radiation on human health It is precisely because of electromagnetic radiation on people's lives have serious threat, that makes the development of radiation protection. This follows the basic introduction of the radiation suit and the development of radiation protection clothings. The development of radiation protection suits is an established industry. Materials made of radiation protection are constantly changing, but their basic working principle has not changed. Followed by the introduction of the basic principles of radiation protection clothings, we theoretically present specific analysis and demonstration. However, the theoretical analysis and practice is often consists a certain gap, so we highlight a few actual situations on the impact of radiation protection clothings. Finally, we present a simple discussion on wide range of applications of radiation protection clothings. The thought process of second part is similar as the first part, respectively, we introduce the health hazards and the impact on people's lives of electrostatic effect and static electricity . Followed by that it is the basic principles, relevant analysis and discussion of anti-static clothing Finally, we provide the detailed explanation of the application of anti-static clothing.

Assessment of the Effect of Acidic Deposition on Canadian Lakes: Determination of Critical Loads for Sulphate Deposition

1993 ◽  
Vol 28 (3-5) ◽  
pp. 183-187 ◽  
Author(s):  
D. S. Jeffries ◽  
D. C. L. Lam
Keyword(s):  
Critical Load ◽  
Critical Loads ◽  
Acidic Deposition ◽  
Operational Definition ◽  
Eastern Canada ◽  
Wide Range ◽  
Sulphate Deposition ◽  
Definition Of ◽  
Terrain Characteristics

The operational definition of the “critical” load for wet SO4 deposition is that which does not increase the regional percent of lakes having pH≤6 for the portion of the population that historically had pH>6. Reviews of the effects of acidic deposition on aquatic biota show that the pH=6 threshold used to determine the critical load is sufficient to protect most organisms. It is inappropriate to specify a single critical load for the whole of eastern Canada due to variability in terrain sensitivity. The Atlantic provinces and easterr Quebec generally have very low critical loads (<8 kg. ha−1.yr−1). The terrain characteristics of this area dictate a critical load very close to background deposition. Lakes in southwestern Quebec and Ontario have critical loads of <8 to >20 kg.ha−1.yr−1 reflecting the wide range in terrain sensitivities that exist in each province.

Example of modeling the use of fire-fighting vessels

2021 ◽  
Vol 93 ◽  
pp. 183-198
Author(s):  
A. V. Kulagin ◽  
Keyword(s):  
Evaluation Criteria ◽  
Fire Fighting ◽  
Technical Equipment ◽  
Fire Extinguishing ◽  
Logical Tree ◽  
Proposed Modification ◽  
Definition Of ◽  
Two Stages ◽  
The Impact

Introduction. The article considers a systematic approach to assessing the effectiveness of the preparation and use of fire-fighting vessels. Using the Pattern method, a study of the use of a fire-fighting boat for solving problems of extinguishing fires on water transport was conducted. Goal and objectives. The purpose of the study is to improve the methodology for determining the effectiveness of the preparation and use of fire-fighting vessels according to the selected evaluation criteria, with the determination of the impact of each criterion on the overall effectiveness of fire extinguishing. Methods. In the article, the process of evaluating the effectiveness of the preparation and use of fire-fighting vessels can be divided into two stages. At the first stage, a verbal presentation of the research task is carried out with the identification of the most "weak" training measures and during the application of fire-fighting vessels using the Pattern Method. At the second stage of the study, an assessment of the state of the identified "weak" measures is carried out with the definition of measures to improve the technical readiness of the material part or organizational and technical measures during the operation of fire-fighting vessels. Results and discussion. The author obtained a particular analytical solution for improving the efficiency of operation of fire-fighting vessels for the case of using a fire-fighting boat. A method for calculating the evaluation criteria is proposed. Conclusions. Thus, the proposed modification of the model of preparation and application of fire-fighting vessels consists in the representation of organizational and technical processes in the form of a logical "tree of goals". The directions of further research in terms of the development of the results obtained in the analysis of the operation of fire-technical equipment on fire-fighting vessels and fire-fighting vessels themselves are determined. Keywords: model, system approach, analysis, pattern method, diesel, special fire extinguishing means

MODELING OF TECHNOLOGICAL METHODS TO IMPROVE WORKING CONDITIONS AT A CONSTRUCTION SITE

2021 ◽  
Vol 13 (4) ◽  
pp. 71-83
Author(s):  
Svetlana Sazonova ◽  
S. Nikolenko ◽  
Aleksandr Osipov
Keyword(s):  
Working Conditions ◽  
Personal Protective Equipment ◽  
Raw Materials ◽  
Protective Equipment ◽  
Construction Site ◽  
Improve Working ◽  
Production Factors ◽  
Individual Protection ◽  
The Impact ◽  
Technological Methods

Dangerous and harmful production factors are considered, the impact of which is experienced by workers during the construction of any facility. Analyzed: the reasons for the formation of these factors for various types of work; equipment, structures and materials, the impact of which on working personnel can also lead to adverse situations. It is noted that the means of individual protection must be selected, paying attention to what kind of work will be performed by the employee and under what conditions. The most effective personal protective equipment and technological methods for improving working conditions at the facility are proposed for use by the workers of the object under consideration. The results obtained can be used to improve the working conditions of workers in warehouses with raw materials.

Sign in / Sign up

Export Citation Format

Share Document