Nitrocellulose Catalyzed With Manganese Oxide Nanoparticles: Advanced Energetic Nanocomposite With Superior Decomposition Kinetics

2021 ◽  
Author(s):  
Sherif Elbasuney ◽  
M. Yehia ◽  
Shukri Ismael ◽  
Yasser El-Shaer ◽  
Ahmed Saleh
Keyword(s):  
Activation Energy ◽  
Particle Size ◽  
Manganese Oxide ◽  
Energetic Materials ◽  
Average Particle Size ◽  
Active Surface ◽  
Propagation Rate ◽  
Hydroxyl Groups ◽  
Average Particle ◽  
Decomposition Enthalpy

Abstract Nanostructured energetic materials can fit with advanced energetic first-fire, and electric bridges (microchips). Manganese oxide, with active surface sites (negatively charged surface oxygen, and hydroxyl groups) can experience superior catalytic activity. Manganese oxide could boost decomposition enthalpy, ignitability, and propagation rate. Furthermore manganese oxide could induce vigorous thermite reaction with aluminium particles. Hot solid or liquid particles are desirable for first-fire compositions. This study reports on the facile fabrication of MnO2 nanoparticles of 10 nm average particle size; aluminium nanoplates of 100 nm average particle size were employed. Nitrocellulose (NC) was adopted as energetic polymeric binder. MnO2/Al particles were integrated into NC matrix via co-precipitation technique. Nanothermite particles offered an increase in NC decomposition enthalpy by 150 % using DSC; ignition temperature was decreased by 8 0C. Nanothemrite particles offered enhanced propagation index by 261 %. Kinetic study demonstrated that nanothermite particles experienced drastic decrease in NC activation energy by - 42, and - 40 KJ mol-1 using Kissinger and KAS models respectively. This study shaded the light on novel nanostructured energetic composition, with superior combustion enthalpy, propagation rate, and activation energy.

Removal of Arsenic from Groundwater Using Nano-Metal Oxide Adsorbents

2017 ◽  
Vol 751 ◽  
pp. 766-772 ◽  
Author(s):  
Phitchaya Muensri ◽  
Supamas Danwittayakul
Keyword(s):  
Particle Size ◽  
Arsenic Removal ◽  
Average Particle Size ◽  
Sample Volume ◽  
Adsorptive Capacity ◽  
Hydroxyl Groups ◽  
Average Particle ◽  
Human Beings ◽  
Arsenic Adsorption ◽  
Removal Of Arsenic

Arsenic can be found in groundwater that is harmful to human beings. In this research, we present the potential uses of ZnO microparticles, ZnO and TiO2 nanoparticles to removal arsenic in groundwater. The experiments of %arsenic removal upon using ZnO microparticles ZnO and TiO2 nanoparticles were conducted in 25 mL of sample volume with 0.05 g of nanoadorpbents at pH 6. We found that the efficiency of arsenic adsorption increased with a reduction of particle size of theadsorbents. Upon using nanoadsorbents to remove arsenic from the solutions with the concentrations of 200-2000 ppb, we found that the %removal of arsenic decreased from 100% to 84% for ZnO nanoparticles and 100% to 97% for TiO2 nanoparticles. Adsorption capacities upon using ZnO and TiO2 nanoparticles were 0.85 and 0.99 mg of arsenic/g of sorbents, respectively. TiO2 nanoparticles exhibited a better adsorption ability to arsenic than that ZnO because TiO2 nanoparticles had a smaller average particle size and larger surface area allowed the adsorption of hydroxyl groups on the surface that could bond with in coming HAsO42- via hydrogen bonding resulting in a better arsenic adsorptive capacity.

Molten Salt Synthesis of Anisotropy BaBi4Ti4O15 Powders in K2SO4-Na2SO4 Flux

2011 ◽  
Vol 687 ◽  
pp. 333-338 ◽  
Author(s):  
Yong Jun Gu ◽  
Jin Liang Huang ◽  
Li Hua Li ◽  
Ke Zhang ◽  
Xiao Wang ◽  
...  
Keyword(s):  
Activation Energy ◽  
Particle Size ◽  
Molten Salt ◽  
Process Parameters ◽  
Average Particle Size ◽  
Particle Growth ◽  
Molten Salt Synthesis ◽  
Average Particle ◽  
Synthesis Conditions ◽  
Arrhenius Dependence

Anisotropic BaBi4Ti4O15 powder was synthesized by a molten salt synthesis (MSS) method in K2SO4-Na2SO4flux and the effects of different process parameters such as calcining temperature, and ratio of salt to reactant (R) on the phase formation and morphology of anisotropic BaBi4Ti4O15particles were also investigated. The as-synthesized powder calcined at 850-950°C exhibits a single tetragonal BaBi4Ti4O15phase. The morphology of BaBi4Ti4O15powder could be adjusted by changing the synthesis conditions. The average particle size (APS) of BaBi4Ti4O15powder increased with R changing from 0.8 to 1.0, while it decreased with further increasing of R to 1.2. In addition, the APS increased with increasing calcining temperature and it showed an Arrhenius dependence on the temperature. The corresponding apparent activation energy for particle growth is 31.9kJ/mol for calcining temperature of 850-1000°C.

scholarly journals The Influence of Nanofiller Shape and Nature on the Functional Properties of Waterborne Poly(urethane-urea) Nanocomposite Films

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2001
Author(s):  
Milena Špírková ◽  
Jiří Hodan ◽  
Rafał Konefał ◽  
Luďka Machová ◽  
Pavel Němeček ◽  
...  
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Particle Size ◽  
Average Particle Size ◽  
Degradation Process ◽  
Nanocomposite Films ◽  
Chain Extension ◽  
Hydroxyl Groups ◽  
Average Particle ◽  
Internal Arrangement ◽  
The Individual

A series of waterborne polycarbonate-based poly(urethane-urea) nanocomposite films were prepared and characterized. An isocyanate excess of 30 mol% with respect to the hydroxyl groups was used in the procedure, omitting the chain-extension step of the acetone process in the dispersion preparation. The individual steps of the synthesis of the poly(urethane-urea) matrix were followed by nuclear magnetic resonance (NMR) spectroscopy. The nanofillers (1 wt% in the final nanocomposite) differed in nature and shape. Starch, graphene oxide and nanocellulose were used as representatives of organic nanofillers, while halloysite, montmorillonite, nanosilica and hydroxyapatite were used as representatives of inorganic nanofillers. Moreover, the fillers differed in their shape and average particle size. The films were characterized by a set of methods to obtain the tensile, thermal and surface properties of the nanocomposites as well as the internal arrangement of the nanoparticles in the nanocomposite film. The degradation process was evaluated at 37 °C in a H2O2 + CoCl2 solution.

The Resistivity-Temperature Property of Transition Metal Oxide Co3O4 with In2O3 Addition

2008 ◽  
Vol 569 ◽  
pp. 193-196 ◽  
Author(s):  
Sen Liang ◽  
Ji Qiang Gao ◽  
Jian Feng Yang ◽  
Min Luo
Keyword(s):  
Activation Energy ◽  
Particle Size ◽  
Transition Metal ◽  
Metal Oxide ◽  
Wide Temperature Range ◽  
Room Temperature ◽  
Average Particle Size ◽  
Average Particle ◽  
Temperature Property ◽  
B Values

The electrical and structural properties of the mixture of Co3O4 and In2O3 were studied. All the samples were added with 2% nanocrystalline SiO2 and sintered at 1000°C for 2 hours. The sintered bodies of the samples were of high density and the average particle size was ~2μm. The materials showed the NTC behavior in a wide temperature range (100-350°C). The resistivity of the materials at room temperature decreased with increase the content of the In2O3 from 0% to 10%. The thermistor constant (B) values and activation energy(E) were 7835, 6637, 5903K, and 0.675, 0.572, and 0.509 eV as the content of In2O3 were 0%, 5% and 10%, respectively.

Determination of grinding parameters of fenugreek seed

1970 ◽  
Vol 26 (1) ◽  
pp. 16 ◽  
Author(s):  
S Balasubramanian ◽  
Rajkumar Rajkumar ◽  
K K Singh
Keyword(s):  
Particle Size ◽  
Energy Consumption ◽  
Moisture Content ◽  
Specific Energy ◽  
Feed Rate ◽  
Average Particle Size ◽  
Specific Energy Consumption ◽  
Average Particle ◽  
Fenugreek Seeds ◽  
Fenugreek Seed

Experiment to identify ambient grinding conditions and energy consumed was conducted for fenugreek. Fenugreek seeds at three moisture content (5.1%, 11.5% and 17.3%, d.b.) were ground using a micro pulverizer hammer mill with different grinding screen openings (0.5, 1.0 and 1.5 mm) and feed rate (8, 16 and 24 kg h-1) at 3000 rpm. Physical properties of fenugreek seeds were also determined. Specific energy consumptions were found to decrease from 204.67 to 23.09 kJ kg-1 for increasing levels of feed rate and grinder screen openings. On the other hand specific energy consumption increased with increasing moisture content. The highest specific energy consumption was recorded for 17.3% moisture content and 8 kg h-1 feed rate with 0.5 mm screen opening. Average particle size decreased from 1.06 to 0.39 mm with increase of moisture content and grinder screen opening. It has been observed that the average particle size was minimum at 0.5 mm screen opening and 8 kg h-1 feed rate at lower moisture content. Bond’s work index and Kick’s constant were found to increase from 8.97 to 950.92 kWh kg-1 and 0.932 to 78.851 kWh kg-1 with the increase of moisture content, feed rate and grinder screen opening, respectively. Size reduction ratio and grinding effectiveness of fenugreek seed were found to decrease from 4.11 to 1.61 and 0.0118 to 0.0018 with the increase of moisture content, feed rate and grinder screen opening, respectively. The loose and compact bulk densities varied from 219.2 to 719.4 kg m-3 and 137.3 to 736.2 kg m-3, respectively.  

Formulating SLN and NLC as Innovative Drug Delivery Systems for Non-Invasive Routes of Drug Administration

2020 ◽  
Vol 27 (22) ◽  
pp. 3623-3656 ◽  
Author(s):  
Bruno Fonseca-Santos ◽  
Patrícia Bento Silva ◽  
Roberta Balansin Rigon ◽  
Mariana Rillo Sato ◽  
Marlus Chorilli
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Drug Release ◽  
Drug Loading ◽  
Average Particle Size ◽  
Delivery Systems ◽  
Average Particle ◽  
Minor Importance ◽  
Routes Of Administration ◽  
Non Invasive

Colloidal carriers diverge depending on their composition, ability to incorporate drugs and applicability, but the common feature is the small average particle size. Among the carriers with the potential nanostructured drug delivery application there are SLN and NLC. These nanostructured systems consist of complex lipids and highly purified mixtures of glycerides having varying particle size. Also, these systems have shown physical stability, protection capacity of unstable drugs, release control ability, excellent tolerability, possibility of vectorization, and no reported production problems related to large-scale. Several production procedures can be applied to achieve high association efficiency between the bioactive and the carrier, depending on the physicochemical properties of both, as well as on the production procedure applied. The whole set of unique advantages such as enhanced drug loading capacity, prevention of drug expulsion, leads to more flexibility for modulation of drug release and makes Lipid-based nanocarriers (LNCs) versatile delivery system for various routes of administration. The route of administration has a significant impact on the therapeutic outcome of a drug. Thus, the non-invasive routes, which were of minor importance as parts of drug delivery in the past, have assumed added importance drugs, proteins, peptides and biopharmaceuticals drug delivery and these include nasal, buccal, vaginal and transdermal routes. The objective of this paper is to present the state of the art concerning the application of the lipid nanocarriers designated for non-invasive routes of administration. In this manner, this review presents an innovative technological platform to develop nanostructured delivery systems with great versatility of application in non-invasive routes of administration and targeting drug release.

Azithromycin nanosuspension preparation using evaporative precipitation into aqueous solution (EPAS) method and its comparative dissolution study

2020 ◽  
Vol 17 ◽  
Author(s):  
Mohammad Hossain Shariare ◽  
Tonmoy Kumar Mondal ◽  
Hani Alothaid ◽  
Md. Didaruzzaman Sohel ◽  
MD Wadud ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Dissolution Rate ◽  
Average Particle Size ◽  
Scale Up ◽  
Average Particle ◽  
Total Drug ◽  
Residual Solvent ◽  
Dissolution Study ◽  
Drug Content

Aim: EPAS (evaporative precipitation into aqueous solution) was used in the current studies to prepare azithromycin nanosuspensions and investigate the physicochemical characteristics for the nanosuspension batches with the aim of enhancing the dissolution rate of the nanopreparation to improve bioavailability. Methods: EPAS method used in this study for preparing azithromycin nanosuspension was achieved through developing an in-house instrumentation method. Particle size distribution was measured using Zetasizer Nano S without sample dilution. Dissolved azithromycin nanosuspensions were also compared with raw azithromycin powder and commercially available products. Total drug content of nanosuspension batches were measured using an Ultra-Performance Liquid Chromatography (UPLC) system with Photodiode Array (PDA) detector while residual solvent was measured using gas chromatography (GC). Results: The average particle size of azithromycin nanosuspension was 447.2 nm and total drug content was measured to be 97.81% upon recovery. Dissolution study data showed significant increase in dissolution rate for nanosuspension batch when compared to raw azithromycin and commercial version (microsuspension). The residual solvent found for azithromycin nanosuspension is 0.000098023 mg/ mL or 98.023 ppb. Conclusion: EPAS was successfully used to prepare azithromycin nanoparticles that exhibited significantly enhanced dissolution rate. Further studies are required to scale up the process and determine long term stability of the nanoparticles.

scholarly journals Evaluation of the Effects of Filler Fineness on the Properties of an Epoxy Asphalt Mixture

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2003
Author(s):  
Wei Xu ◽  
Jintao Wei ◽  
Zhengxiong Chen ◽  
Feng Wang ◽  
Jian Zhao
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Asphalt Mixture ◽  
Average Particle ◽  
Fine Dust ◽  
Bonding Structure ◽  
Epoxy Asphalt ◽  
Mineral Powder ◽  
Marshall Stability ◽  
Mixture Sample

The type and fineness of a filler significantly affect the performance of an asphalt mixture. There is a lack of specific research on the effects of filler fineness and dust from aggregates on the properties of epoxy asphalt (EA) mixtures. The effects of aggregate dust and mineral powder on the properties of an EA mixture were evaluated. These filler were tested to determine their fineness, specific surface area and mineral composition. The effects of these fillers on the EA mastic sample and mixture were evaluated. The morphology of the EA mastic samples was analyzed using scanning electron microscopy (SEM). The effects of the fillers on the Marshall stability, tensile strength and fatigue performance of the EA mixture were evaluated. The dust from the aggregates exhibited an even particle size distribution, and its average particle size was approximately 20% of that of the mineral powder. The SEM microanalysis showed that the EA mastic sample containing relatively fine dust formed a tight and dense interfacial bonding structure with the aggregate. The EA mixture sample containing filler composed of dust from aggregate had a significantly higher strength and longer fatigue life than that of the EA sample containing filler composed of mineral powder.

scholarly journals Surface Activity of Humic Acid and Its Sub-Fractions from Forest Soil

2021 ◽  
Vol 13 (15) ◽  
pp. 8122
Author(s):  
Shijie Tian ◽  
Weiqiang Tan ◽  
Xinyuan Wang ◽  
Tingting Li ◽  
Fanhao Song ◽  
...  
Keyword(s):  
Surface Tension ◽  
Particle Size ◽  
Humic Acid ◽  
Forest Soil ◽  
Surface Activity ◽  
Self Assembly ◽  
Average Particle Size ◽  
Gaussian Model ◽  
Exponential Model ◽  
Average Particle

Surface activity of humic acid (HA) and its six sub-fractions isolated from forest soil were characterized by surface tension measurements, dynamic light scattering, and laser doppler electrophoresis. The surface tension of HA and its sub-fractions reduced from 72.4 mN·m−1 to 36.8 mN·m−1 in exponential model with the increasing concentration from 0 to 2000 mg·L−1. The critical micelle concentration (CMC) and Z-average particle size ranged from 216–1024 mg·L−1 and 108.2–186.9 nm for HA and its sub-fractions, respectively. The CMC have related with alkyl C, O-alkyl C, aromatic C, and carbonyl C (p < 0.05), respectively, and could be predicted with the multiple linear regression equation of CMC, CMC = 18896 − 6.9 × C-296 × alkyl C-331 × aromatic C-17019 × H/C + 4054 × HB/HI (p < 0.05). The maximum particle size was 5000 nm after filtered by a membrane with pore size of 450 nm, indicating HA and its sub-fractions could progressed self-assembly at pH 6.86. The aggregate sizes of number-base particle size distributions were mainly in six clusters including 2 ± 1 nm, 5 ± 2 nm, 10 ± 3 nm, 21 ± 8 nm, 40 ± 10 nm, and >50 nm analyzed by Gaussian model that maybe due to the inconsistency of the components and structures of the HA sub-fractions, requiring further study. It is significance to explore the surface activity of HA and its sub-fractions, which is helpful to clarify the environmental behavior of HA.

Microstructure Characterization of Ag Nanoparticles Prepared by Hydrothermal Method

2012 ◽  
Vol 476-478 ◽  
pp. 1138-1141
Author(s):  
Zhi Qiang Wei ◽  
Qiang Wei ◽  
Li Gang Liu ◽  
Hua Yang ◽  
Xiao Juan Wu
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Hydrothermal Method ◽  
Ag Nanoparticles ◽  
Average Particle Size ◽  
Average Particle ◽  
Face Centered Cubic ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Face Centered

Ag nanoparticles were successfully synthesized by hydrothermal method under the polyol system combined with traces of sodium chloride, Silver nitrate(AgNO3) and polyvinylpyrrolidone (PVP) acted as the silver source and dispersant respectively. The samples by this process were characterized via X-ray powder diffraction (XRD), Brunauer–Emmett–Teller (BET) adsorption equation, transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED) to determine the chemical composition, particle size, crystal structure and morphology. The experiment results indicate that the crystal structure of the samples is face centered cubic (FCC) structure as same as the bulk materials, The specific surface area is 24 m2/g, the particle size distribution ranging from10 to 50 nm, with an average particle size about 26 nm obtained by TEM and confirmed by XRD and BET results.

Sign in / Sign up

Export Citation Format

Share Document