The role of solution chemistry in the stability and detachment of cohesive kaolinite particles

2001 ◽  
Vol 1 (1) ◽  
pp. 25-32 ◽  
Author(s):  
V. Ravisangar ◽  
B.M. Brouckaert ◽  
A. Amirtharajah ◽  
T.W. Sturm
Keyword(s):  
Granular Media ◽  
Interaction Force ◽  
Solution Chemistry ◽  
Force Model ◽  
Concentrated Suspensions ◽  
Sediment Deposits ◽  
The Stability ◽  
Relationship Of ◽  
Filter Backwashing

The effect of solution chemistry on the behavior of kaolinite in three different situations was investigated: (1) the detachment of kaolinite from glass beads in a fluidized bed, (2) the erosion of kaolinite deposits in a laboratory flume and (3) the determination of the stress-strain rate relationship of concentrated suspensions in a rheometer. The experimental results from these three different approaches could be explained in terms of changes in mode of particle associations which in turn could be characterized in terms of a micromechanical force model which predicts the effect of solution chemistry on the interaction force between adjacent particle surfaces. Understanding the relationship between solution and surface chemistry on the structure, mechanical strength and mechanism of erosion of cohesive sediment deposits is an important step towards developing predictive models of a number of processes including erosion of cohesive sediments in streams and estuaries, and detachment of particles from granular media during filtration and filter backwashing.

scholarly journals Confl ict Regulation of Debtor’s Transactions Invalidity in Cross-Border Insolvency

2021 ◽  
Vol 16 (1) ◽  
pp. 147-155
Author(s):  
M. I. Polshkova
Keyword(s):  
Legal Regulation ◽  
European Regulation ◽  
Applicable Law ◽  
Cross Border ◽  
Judicial Practice ◽  
Foreign Law ◽  
Bankruptcy Procedure ◽  
The Stability ◽  
Relationship Of

Given the lack of proper legal regulation of both cross-border insolvency in general and the invalidity of transactions in cross-border insolvency in the Russian law, the author analyzes Russian judicial practice revealing the problem of determining applicable law in challenging the debtor’s transactions in the framework of the insolvency procedure. The author concludes that the Russian judicial practice shows that determination of the law applicable to the invalidity of transactions is contingent on the existence of a bankruptcy procedure and on the grounds for recognizing the transaction as invalid. Based on the analysis of the European regulation of legal issues applicable when challenging the debtor’s transactions in cross-border insolvency, the author considers possible exceptions to the conflict of laws lex fori concursus for certain categories of third parties to be protected from unexpected interference in the legal relationship of the parties to foreign law in order to ensure the stability of the turnover and maintain legal certainty.

scholarly journals INFLUENCE OF GEOMETRIC PARAMETERS OF THE TREATMENT SHOWER ON THE DEFORMATION CHARACTERISTICS OF THE SOIL WHEN FORMING A CAVITY FOR AN ANTI-FILTRATION SCREEN

2019 ◽  
pp. 75-82 ◽  
Author(s):  
Olena Solona ◽  
Vladimir Kovbasa
Keyword(s):  
Mechanical Properties ◽  
Soil Compaction ◽  
Geometric Parameters ◽  
Filter Screen ◽  
Stress Components ◽  
The Stability ◽  
Relationship Of ◽  
The Relationship ◽  
Resistance Forces

The article presents the results of studies of the interaction of the plowskin part of the mole farmer with soil. The purpose of the study is to determine the rates of relative deformations depending on its geometric and kinematic parameters. This will make it possible to determine the magnitude of the stress components and soil density functions that depend on these stresses. In addition, this will allow us to determine the strength of the soil resistance to the movement of the plow share of the mover. The soil is presented in the form of a model of a viscoelastic medium in such a way that bigaromic potential functions can be used to analyze the interaction, since the final equations are reduced to a system of elliptic equations. Such a statement of the problem and its solution make it possible to obtain dependences of the relationship of the geometric parameters of the ploughshare part of the mover with the components of the strain rates of the soil, as well as the mechanical properties of the soil on the surface of its contact with the ploughshare. These expressions are the initial ones for the further determination of the components of stresses in the soil, which make it possible to determine the compaction of the soil on the walls of the formed cavity for drawing the anti-filter screen and the components of the resistance forces to the ploughshare. Obtaining the final expressions of soil compaction on the molehill walls together with the dependences of the resistance forces will allow us to determine the geometric parameters of the working body, with various mechanical properties of the soil, to ensure the stability of the molehill walls with minimal energy consumption. Such a solution is common for a certain class of problems on the interaction of the working body with the soil, which is represented by a deformable medium in order to determine the directions of changes in deformations or their velocities in order to use them to determine stress components that will allow you to find zones of possible plastic deformations and destruction of soil continuity.

STEM and ELS Observation of Early Oxide Formation on the Surface of Cr Thin Films

1980 ◽  
Vol 38 ◽  
pp. 412-413
Author(s):  
Fumio Watari ◽  
J. M. Cowley
Keyword(s):  
Thin Films ◽  
Optical System ◽  
Room Temperature ◽  
Oxide Formation ◽  
Initial Nucleation ◽  
Diffraction Patterns ◽  
Relationship Of ◽  
Multiple Twinning ◽  
Moderately High Temperature

STEM coupled with the optical system was used for the investigation of the early oxidation on the surface of Cr. Cr thin films (30 – 1000Å) were prepared by evaporation onto the polished or air-cleaved NaCl substrates at room temperature and 45°C in a vacuum of 10−6 Torr with an evaporation speed 0.3Å/sec. Rather thick specimens (200 – 1000Å) with various preferred orientations were used for the investigation of the oxidation at moderately high temperature (600 − 1100°C). Selected area diffraction patterns in these specimens are usually very much complicated by the existence of the different kinds of oxides and their multiple twinning. The determination of the epitaxial orientation relationship of the oxides formed on the Cr surface was made possible by intensive use of the optical system and microdiffraction techniques. Prior to the formation of the known rhombohedral Cr2O3, a thin spinel oxide, probably analogous to γ -Al203 or γ -Fe203, was formed. Fig. 1a shows the distinct epitaxial growth of the spinel (001) as well as the rhombohedral (125) on the well-oriented Cr(001) surface. In the case of the Cr specimen with the (001) preferred orientation (Fig. 1b), the rings explainable by spinel structure appeared as well as the well defined epitaxial spots of the spinel (001). The microdif fraction from 20A areas (Fig. 2a) clearly shows the same pattern as Fig. Ia with the weaker oxide spots among the more intense Cr spots, indicating that the thickness of the oxide is much less than that of Cr. The rhombohedral Cr2O3 was nucleated preferably at the Cr(011) sites provided by the polycrystalline nature of the present specimens with the relation Cr2O3 (001)//Cr(011), and by further oxidation it grew into full coverage of the rest of the Cr surface with the orientation determined by the initial nucleation.

Calculating the aerodynamics of vertical axis wind turbines

2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc
Keyword(s):  
Wind Turbine ◽  
Incidence Angle ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Velocity Triangle ◽  
Relationship Of ◽  
The Relationship

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.

Tire Treadwear — A Comprehensive Evaluation of the Factors: Generic Type, Aspect Ratio, Tread Pattern, and Tread Composition Part I: Introduction and Details on the Organization of the Program

1986 ◽  
Vol 14 (4) ◽  
pp. 201-218 ◽  
Author(s):  
A. G. Veith
Keyword(s):  
Aspect Ratio ◽  
Comprehensive Evaluation ◽  
Test Method ◽  
Interactive Effects ◽  
Data Analyses ◽  
Main Effect ◽  
Systematic Determination ◽  
Relationship Of ◽  
The Relationship

Abstract This four-part series of papers addresses the problem of systematic determination of the influence of several tire factors on tire treadwear. Both the main effect of each factor and some of their interactive effects are included. The program was also structured to evaluate the influence of some external-to-tire conditions on the relationship of tire factors to treadwear. Part I describes the experimental design used to evaluate the effects on treadwear of generic tire type, aspect ratio, tread pattern (groove or void level), type of pattern (straight rib or block), and tread compound. Construction procedures and precautions used to obtain a valid and functional test method are included. Two guiding principles to be used in the data analyses of Parts II and III are discussed. These are the fractional groove and void concept, to characterize tread pattern geometry, and a demonstration of the equivalence of wear rate for identical compounds on whole tread or multi-section tread tires.

A FORECAST OF PRODUCTIVE LONGEVITY OF HOLSTEIN COWS BY INDIRECT SIGNS

2020 ◽  
Author(s):  
З.С. САНОВА
Keyword(s):  
Correlation Coefficient ◽  
Aging Process ◽  
Direct Relationship ◽  
Stability Index ◽  
Age At First Calving ◽  
Group I ◽  
Predicted Values ◽  
The Stability ◽  
Relationship Of ◽  
The Relationship

В статье представлены материалы о взаимосвязи продолжительности продуктивного использования коров с характеристикой устойчивости к деградации, с возрастом отела и удоем. В исследованной, разнородной по происхождению, группе животных для прогноза продуктивного периода коров, обусловленного устойчивостью к деградации и возрастом первого отела, пригодно уравнение регрессии, аргументами в котором являются индекс устойчивости, возраст первого отела в первой и второй степенях. Коэффициент корреляции межу предсказанными значениями продуктивного периода и его фактическими величинами в I группе составляет 0,502, во II - 0,604. При этом крайние варианты прогнозируются со статистическими ошибками 5 мес при оценке индекса устойчивости по 2 лактациям и 4,1 мес по 3, а средние варианты, соответственно, 1,6 и 1,51 мес. Индекс устойчивости к процессу старения является важной характеристикой биологических особенностей коров, определяющий их продуктивное долголетие. Его оценка по первым 2 и 3 лактациям имеет прямолинейную связь с продуктивным периодом (r=0,4109 и r=0,5270), соответственно. Зависимость продуктивного периода от возраста первого отела криволинейная — с увеличением возраста первого отела сокращается срок продуктивного использования, при возрасте первого отела более 1400 дней срок продуктивного использования колеблется от 1,33 до 1,41 лактации. Коэффициент корреляции между этими характеристиками коров составляет - 0,2164 в I и - 0,2620 во II группах. The article presents materials about the relationship of the duration of productive use of cows with the characteristic of resistance to degradation, with the age of calving and milk yield. In the studied group of animals, which is heterogeneous in origin, the regression equation is suitable for predicting the productive period of cows due to resistance to degradation and the age of the first calving, the arguments of which are the stability index, the age of the first calving in the first and second degrees. The correlation coefficient between the predicted values of the productive period and its actual values in group I is 0.502, in group II - 0.604. At the same time, the extreme variants are predicted with statistical errors of 5 months when evaluating the stability index for 2 lactations and 4.1 months for 3, and the average variants, respectively, are 1.6 and 1.51 months. The index of resistance to the aging process is an important characteristic of the biological characteristics of cows, which determines their productive longevity. Its estimate for the first 2 and 3 lactations has a direct relationship with the productive period (r=0.4109 and r=0.5270), respectively. The dependence of the productive period age at first calving curvilinear with increasing age at first calving reduces the time to productive use, while age at first calving of more than 1400 days, the period of productive use ranges from 1.33 to 1.41 lactation. The correlation coefficient between these characteristics of cows is-0.2164 in I and-0.2620 in II groups.

Determining the Norton’s Equivalent Model of Distribution System with Distributed Generation (DG) for Stability Analysis

2019 ◽  
Vol 12 (2) ◽  
pp. 190-198
Author(s):  
Sunny Katyara ◽  
Lukasz Staszewski ◽  
Faheem Akhtar Chachar
Keyword(s):  
Distributed Generation ◽  
Normal Condition ◽  
Distribution System ◽  
Distribution Networks ◽  
Equivalent Model ◽  
Stability Factor ◽  
Matlab Simulation ◽  
The Stability ◽  
Stability Issues

Background: Since the distribution networks are passive until Distributed Generation (DG) is not being installed into them, the stability issues occur in the distribution system after the integration of DG. Methods: In order to assure the simplicity during the calculations, many approximations have been proposed for finding the system’s parameters i.e. Voltage, active and reactive powers and load angle, more efficiently and accurately. This research presents an algorithm for finding the Norton’s equivalent model of distribution system with DG, considering from receiving end. Norton’s model of distribution system can be determined either from its complete configuration or through an algorithm using system’s voltage and current profiles. The algorithm involves the determination of derivative of apparent power against the current (dS/dIL) of the system. Results: This work also verifies the accuracy of proposed algorithm according to the relative variations in the phase angle of system’s impedance. This research also considers the varying states of distribution system due to switching in and out of DG and therefore Norton’s model needs to be updated accordingly. Conclusion: The efficacy of the proposed algorithm is verified through MATLAB simulation results under two scenarios, (i) normal condition and (ii) faulty condition. During normal condition, the stability factor near to 1 and change in dS/dIL was near to 0 while during fault condition, the stability factor was higher than 1 and the value of dS/dIL was away from 0.

Synthesis and solvatochromic studies of 2- amino-3-phenolazo1-(4-sulfophenyl)-3-methyi-5-pyrozolone and use it for the determination of trace amount of Nickel (II) in blood samples

2016 ◽  
Vol 5 (10) ◽  
pp. 4920
Author(s):  
Amar M. Ali ◽  
Hussain. J. Mohammed*
Keyword(s):  
Stability Constant ◽  
Trace Amount ◽  
Benzenesulfonic Acid ◽  
Determination Method ◽  
Blood Samples ◽  
Determination Of Nickel ◽  
Normal Human ◽  
The Stability ◽  
Normal Human Blood

A new, simple, sensitive and rapid spectrophotometric method is proposed for the determination of trace amount of Nickel (II). The method is based on the formation of a 1:2 complex with 4-(4-((2-hydroxy-6-nitrophenyl) diazenyl) -3-methyl-5-oxo-2, 5-dihydro-1H-pyrazol-1-yl) benzenesulfonic acid (2-ANASP) as a new reagent is developed. The complex has a maximum absorption at 516 nm and εmax of 1. 84 X 105 L. mol-1. cm-1. A linear correlation (0. 25 – 4. 0μg. ml-1) was found between absorbance at λmax and concentration. The accuracy and reproducibility of the determination method for various known amounts of Nickel (II) were tested. The results obtained are both precise (RSD was 1. 2 %) and accurate (relative error was 0. 787 %). The effect of diverse ions on the determination of Nickel (II) to investigate the selectivity of the method were also studied. The stability constant of the product was 0. 399 X 106 L. mol-1. The proposed method was successfully applied to the analysis of diabetes blood and normal human blood. 

scholarly journals Determination of Objective Weights Using a New Method Based on the Removal Effects of Criteria (MEREC)

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 525 ◽  
Author(s):  
Mehdi Keshavarz-Ghorabaee ◽  
Maghsoud Amiri ◽  
Edmundas Kazimieras Zavadskas ◽  
Zenonas Turskis ◽  
Jurgita Antucheviciene
Keyword(s):  
Essential Elements ◽  
New Method ◽  
Multi Criteria Decision Making ◽  
Analysis Of Means ◽  
Simulation Based ◽  
Criteria Weights ◽  
The Stability ◽  
Computational Analyses ◽  
Weighting Methods

The weights of criteria in multi-criteria decision-making (MCDM) problems are essential elements that can significantly affect the results. Accordingly, researchers developed and presented several methods to determine criteria weights. Weighting methods could be objective, subjective, and integrated. This study introduces a new method, called MEREC (MEthod based on the Removal Effects of Criteria), to determine criteria’ objective weights. This method uses a novel idea for weighting criteria. After systematically introducing the method, we present some computational analyses to confirm the efficiency of the MEREC. Firstly, an illustrative example demonstrates the procedure of the MEREC for calculation of the weights of criteria. Secondly, a comparative analysis is presented through an example for validation of the introduced method’s results. Additionally, we perform a simulation-based analysis to verify the reliability of MEREC and the stability of its results. The data of the MCDM problems generated for making this analysis follow a prevalent symmetric distribution (normal distribution). We compare the results of the MEREC with some other objective weighting methods in this analysis, and the analysis of means (ANOM) for variances shows the stability of its results. The conducted analyses demonstrate that the MEREC is efficient to determine objective weights of criteria.

Sign in / Sign up

Export Citation Format

Share Document