Electrospun Polymer Nanofiber from Moringa Oleifera Kernel Oil with Coaxial Electrospinning Method

2020 ◽  
Vol 16 (1) ◽  
pp. 90-97
Author(s):  
Oluwafunke T. Afolabi-owolabi ◽  
Syahariza Z. Abidin ◽  
Fazila Ariffin
Keyword(s):  
Electron Microscopy ◽  
Shelf Life ◽  
Moringa Oleifera ◽  
Thermal Dissociation ◽  
Oil Quality ◽  
Coaxial Electrospinning ◽  
Electrospun Nanofiber ◽  
Kernel Oil ◽  
Polymer Nanofiber ◽  
Electrospinning Method

Background: Moringa oleifera kernel oil consist of monounsaturated fatty acid with high percentage of oleic acid. The oil consist of phytochemicals, bioactive compounds and nutrients that have several application in health industries. However, the oil degrades on exposure to light, heat and oxygen overtime. In addition, rancidity cause the oil quality to defect and reduce the shelf-life. Therefore, microencapsulation techniques are uniquely applied to oil to preserve their native quality and prolong their shelf life. Objective: This study examines different polymer concentrations and injection flowrates of zein nanofiber from Moringa oleifera kernel oil using coaxial electrospinning method. Methods: A 40% w/v zein polymer was the optimal loading concentration and 0.7 mL/hour of zein polymer with 0.1 mL/hour of Moringa oleifera kernel oil was the optimal injection flowrates for electrospun nanofiber. Analysis of the Moringa oleifera kernel oil and polymer sample micromorphology, were investigated with Field Emission Scanning Electron Microscopy (FESEM) and transmission electron microscopy (TEM). Result: result shows uniformly layered nanofiber. The nanofiber has no beads formation and the fiber strands are continuous with no entanglement. The polymer encapsulated the oil efficiently. Furthermore, thermal analysis through Differential Scanning Calorimetry (DSC) showed consistency in the nanofiber thermal behavior. Thermogravimetric (TGA) analysis revealed the weight loss and thermal dissociation of the polymer structure. The electrospun nanofiber average diameter was 450 ± 24 nm and exhibited hydrophobicity. Conclusion: The co-axial electrospine technique was effective in fabricating electrospune nanofibers.

Effect of Poly(vinyl alcohol)/Chitosan Ratio on Electrospun-Nanofiber Morphologies

2012 ◽  
Vol 463-464 ◽  
pp. 734-738 ◽  
Author(s):  
Tongsai Jamnongkan ◽  
Amnuay Wattanakornsiri ◽  
P. Pungboon Pansila ◽  
Claudio Migliaresi ◽  
Supranee Kaewpirom
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Vinyl Alcohol ◽  
Weight Ratio ◽  
Electrospun Nanofibers ◽  
Poly Vinyl Alcohol ◽  
Electrospun Nanofiber ◽  
Electrospinning Method ◽  
Chitosan Content ◽  
Scanning Electron

Series of poly (vinyl alcohol)/chitosan (PVA/CS) electrospun nanofibers with different weight ratio of PVA and CS were fabricated by electrospinning method. The surface morphology, diameter, and structure of electrospun nanofibers were investigated by scanning electron microscopy (SEM). As a result of PVA and CS composition measurements, the electrospun nanofibers morphologies were mainly affected by weight ratio of the polymer solution. When increasing the chitosan content in the blend solution, the electrospun nanofibers could hardly form. This result indicates that the electrospun nanofiber formation is enhanced by chitosan content.

scholarly journals Doxycycline-Eluting Core-Shell Type Nanofiber-Covered Trachea Stent for Inhibition of Cellular Metalloproteinase and Its Related Fibrotic Stenosis

Pharmaceutics ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 421 ◽  
Author(s):  
Baskaran ◽  
Ko ◽  
Davaa ◽  
Park ◽  
Jiang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Drug Loading ◽  
In Vitro Release ◽  
Coaxial Electrospinning ◽  
Core Shell ◽  
Transmission Electron ◽  
Electrospinning Method ◽  
Shell Forming ◽  
Tissue Models

In this study, we fabricated a doxycycline (doxy)-eluting nanofiber-covered endotracheal stent for the prevention of stent intubation-related tissue fibrosis and re-stenosis. The nanofiber was deposited directly on the outer surface of the stent using a coaxial electrospinning method to form a doxy-eluting cover sleeve. Poly(d,l-lactide) was used as the shell-forming polymer and dedicated drug release-control membrane. Polyurethane was selected as the drug-loading core polymer. The compositional ratio of the core to shell was adjusted to 1:0, 1:2, and 1:4 by changing the electro-spray rate of each polymeric solution and microscopic observation of nanofibers using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and the fluorescence microscopy proved core-shell structure of nanofibers. The in vitro release study suggested that the release of doxy could be controlled by increasing the compositional ratio of the shell. The growth of HT1080 fibrosarcoma cells was inhibited by the 10% doxy-containing nanofiber. The real-time polymerase chain reaction (PCR) in HT1080 cells and xenografted tissue models indicated that the doxy-releasing nanofiber inhibited mRNA expression of metalloproteinases (MT1-MMP, MMP-2, and MMP-9). Overall, our study demonstrates that a doxy-eluting core-shell nanofiber stent can be successfully fabricated using coaxial electrospinning and displays the potential to prevent fibrotic re-stenosis, which is the most problematic clinical complication of tracheal stent intubation.

Synthesis of core–shell α-Fe2O3@NiO nanofibers with hollow structures and their enhanced HCHO sensing properties

2015 ◽  
Vol 3 (10) ◽  
pp. 5635-5641 ◽  
Author(s):  
Jing Cao ◽  
Ziying Wang ◽  
Rui Wang ◽  
Sen Liu ◽  
Teng Fei ◽  
...  
Keyword(s):  
Gas Sensing ◽  
Coaxial Electrospinning ◽  
Core Shell ◽  
Sensing Properties ◽  
Hollow Structures ◽  
Hollow Nanostructures ◽  
Electrospinning Method

Core–shell α-Fe2O3@NiO nanofibers with hollow nanostructures are synthesized by a facile coaxial electrospinning method and calcination procedure and present enhanced HCHO gas sensing performances.

scholarly journals The Potential Impact of Moringa oleifera for Diminishing the Microbial contamination and Prolonging the Quality and Shelf-Life of Chilled Meat

2021 ◽  
Author(s):  
Mohamed Hamada ◽  
Mabrouk Abd Eldaim ◽  
Said I. Fathalla ◽  
Ayman El Behiry ◽  
Mohamed Alkafafy
Keyword(s):  
Shelf Life ◽  
Moringa Oleifera ◽  
Thiobarbituric Acid ◽  
Control Group ◽  
Standard Diet ◽  
Breast Meat ◽  
E Coli ◽  
Potential Impact ◽  
Cadmium And Lead ◽  
Quality And Shelf Life

This study was implemented to assess the mechanism by which Moringa oleifera leaf extract (MOLE) improves the quality and prolongs shelf-life of the broilers’ breast meat. Ninety Cobb chicks were randomly allocated to 3 groups. A control group received the standard diet, whereas the other two groups received diets containing MOLE at the doses of 250 and 500 mg/kg for 21 days. Inclusion of MOLE in broilers diet significantly reduced the detrimental changes in the overall sensory attribute scores, characteristic color and odor, and the loss of breast muscle elasticity during storage. Furthermore, it significantly reduced concentrations of thiobarbituric acid, total volatile nitrogen, non-esterified fatty acids, and peroxide, during storage compared to the control samples. No effect on the concentrations of heavy metals, such as copper, cadmium, and lead, was observed. Decomposition of samples was delayed as indicated by lower pH values and higher sensory scores at 4 and 6 days of storage in the MOLE groups. Reduced contamination with E. coli and Salmonella species indicated an antibacterial effect of MOLE. Finally, the present study highlights that MOLE supplementation may play a role in improving quality and shelf-life of the chilled breast meat in broilers.

scholarly journals Green Synthesis of Encapsulated Copper Nanoparticles Using a Hydroalcoholic Extract of Moringa oleifera Leaves and Assessment of Their Antioxidant and Antimicrobial Activities

Molecules ◽  
2020 ◽  
Vol 25 (3) ◽  
pp. 555 ◽  
Author(s):  
Prince Edwin Das ◽  
Imad A. Abu-Yousef ◽  
Amin F. Majdalawieh ◽  
Srinivasan Narasimhan ◽  
Palmiro Poltronieri
Keyword(s):  
Electron Microscopy ◽  
Green Synthesis ◽  
Copper Nanoparticles ◽  
Moringa Oleifera ◽  
Metallic Copper ◽  
Total Phenolic ◽  
Copper Sulphate Solution ◽  
Hydroalcoholic Extract ◽  
Moringa Oleifera Leaves ◽  
Anti Fungal

The synthesis of metal nanoparticles using plant extracts is a very promising method in green synthesis. The medicinal value of Moringa oleifera leaves and the antimicrobial activity of metallic copper were combined in the present study to synthesize copper nanoparticles having a desirable added-value inorganic material. The use of a hydroalcoholic extract of M. oleifera leaves for the green synthesis of copper nanoparticles is an attractive method as it leads to the production of harmless chemicals and reduces waste. The total phenolic content in the M. oleifera leaves extract was 23.0 ± 0.3 mg gallic acid equivalent/g of dried M. oleifera leaves powder. The M. oleifera leaves extract was treated with a copper sulphate solution. A color change from brown to black indicates the formation of copper nanoparticles. Characterization of the synthesized copper nanoparticles was performed using ultraviolet-visible light (UV-Vis) spectrophotometry, Fourier-transform infrared (FTIR) spectrometry, high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The synthesized copper nanoparticles have an amorphous nature and particle size of 35.8-49.2 nm. We demonstrate that the M. oleifera leaves extract and the synthesized copper nanoparticles display considerable antioxidant activity. Moreover, the M. oleifera leaves extract and the synthesized copper nanoparticles exert considerable anti-bacterial activity against Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, and Enterococcus faecalis (MIC values for the extract: 500, 250, 250, and 250 µg/mL; MIC values for the copper nanoparticles: 500, 500, 500, and 250 µg/mL, respectively). Similarly, the M. oleifera leaves extract and the synthesized copper nanoparticles exert relatively stronger anti-fungal activity against Aspergillus niger, Aspergillus flavus, Candida albicans, and Candida glabrata (MIC values for the extract: 62.5, 62.5, 125, and 250 µg/mL; MIC values for the copper nanoparticles: 125, 125, 62.5, and 31.2 µg/mL, respectively). Our study reveals that the green synthesis of copper nanoparticles using a hydroalcoholic extract of M. oleifera leaves was successful. In addition, the synthesized copper nanoparticles can be potentially employed in the treatment of various microbial infections due to their reported antioxidant, anti-bacterial, and anti-fungal activities.

scholarly journals Electrospinning on 3D Printed Polymers for Mechanically Stabilized Filter Composites

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2034 ◽  
Author(s):  
Tomasz Kozior ◽  
Al Mamun ◽  
Marah Trabelsi ◽  
Martin Wortmann ◽  
Sabantina Lilia ◽  
...  
Keyword(s):  
3D Printing ◽  
Thermoplastic Polyurethane ◽  
High Surface ◽  
Antimicrobial Properties ◽  
Mechanical Damage ◽  
Volume Ratio ◽  
Electrospun Nanofiber ◽  
Polymer Nanofiber ◽  
3D Printed ◽  
Nanofiber Mats

Electrospinning is a frequently used method to prepare air and water filters. Electrospun nanofiber mats can have very small pores, allowing for filtering of even the smallest particles or molecules. In addition, their high surface-to-volume ratio allows for the integration of materials which may additionally treat the filtered material through photo-degradation, possess antimicrobial properties, etc., thus enhancing their applicability. However, the fine nanofiber mats are prone to mechanical damage. Possible solutions include reinforcement by embedding them in composites or gluing them onto layers that are more mechanically stable. In a previous study, we showed that it is generally possible to stabilize electrospun nanofiber mats by 3D printing rigid polymer layers onto them. Since this procedure is not technically easy and needs some experience to avoid delamination as well as damaging the nanofiber mat by the hot nozzle, here we report on the reversed technique (i.e., first 3D printing a rigid scaffold and subsequently electrospinning the nanofiber mat on top of it). We show that, although the adhesion between both materials is insufficient in the case of a common rigid printing polymer, nanofiber mats show strong adhesion to 3D printed scaffolds from thermoplastic polyurethane (TPU). This paves the way to a second approach of combining 3D printing and electrospinning in order to prepare mechanically stable filters with a nanofibrous surface.

Synthesis of La2NiO4+δ Nanofibers by Electrospinning Method and their Application

2018 ◽  
Vol 281 ◽  
pp. 859-864
Author(s):  
Yan Xing ◽  
Meng Fei Zhang ◽  
Tian Jun Li ◽  
Wei Pan
Keyword(s):  
Electron Microscopy ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide ◽  
Thermal Treatments ◽  
X Ray Diffraction ◽  
Mixed Conductivity ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Electrospinning Method

La2NiO4+σ nanofibers exhibiting typical Ruddlesden–Popper structure (K2NiO4) were fabricated by a facile electrospinning method. X-ray diffraction, scanning electron microscopy and transmission electron microscopy were used to analyze the structure, morphology and crystal process of the La2NiO4+σ nanofibers. For electrical properties measurement, uniaxially aligned nanofibers were directly collected and assembled into electrode. In our research, La2NiO4+σ phase forms above 873K with no impurity phase emerges during the thermal treatments. The nanofibers are smooth and uniform throughout the entire length and the grain is growing as calcination temperature increases. Furthmore, the La2NiO4+σ nanofibers own high mixed conductivity at 773K, laying good foundation for intermediate temperature solid oxide fuel cells application.

scholarly journals Effect of Electrospun Nanofiber Additive on Selected Mechanical Properties of Hardened Cement Paste

2020 ◽  
Vol 10 (21) ◽  
pp. 7504
Author(s):  
Tri N.M. Nguyen ◽  
Do Hyung Lee ◽  
Jung J. Kim
Keyword(s):  
Electron Microscopy ◽  
Mechanical Property ◽  
Carbon Nanotubes ◽  
Electrospun Nanofibers ◽  
Cementitious Materials ◽  
Hardened Cement ◽  
Electrospun Nanofiber ◽  
Nylon 66 ◽  
Hybrid Nanofibers ◽  
Transmission Electron

This study presents an estimation of the mechanical property enhancing mechanism of electrospun-nanofiber-blended cementitious materials. Four types of electrospun nanofibers (NFs) were introduced into Portland cement: nylon 66 nanofibers, tetraethyl orthosilicate/polyvinylpyrrolidone nanofibers (TEOS/PVP), hybrid nanofibers containing carbon nanotubes (CNTs) and nylon 66, and hybrid nanofibers containing carbon nanotubes and TEOS/PVP (CNTs-TEOS/PVP NFs). Due to the mechanical strength results, there was an increase of 27.3% and 33.4% in compressive strength when adding TEOS/PVP nanofibers and the hybrid nanofibers containing carbon nanotubes and TEOS/PVP into the pastes, respectively. In addition, there was an increase of 25.7% and 54.3% in tensile strength when adding nylon 66 nanofibers and the hybrid nanofibers containing carbon nanotubes and nylon 66 into the pastes, respectively. The highest toughness of 61.7% was obtained by the paste blended with CNTs-TEOS/PVP NFs. The results observed from scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis clarified the change in the microstructure of the modified pastes, as well as the mechanical property enhancing mechanism of the electrospun-nanofiber-blended cementitious materials.

Sign in / Sign up

Export Citation Format

Share Document