scholarly journals Impact of recycling sustainability on organizational performance

2021 ◽  
Vol 6 ◽  
Author(s):  
Uchechukwuka Linus Odia
Keyword(s):  
Organizational Performance ◽  
Publishing Industry ◽  
Raw Materials ◽  
Manufacturing Sector ◽  
High Rate ◽  
Regional Market ◽  
Publishing Houses ◽  
Materials Used ◽  
Rate Of Returns ◽  
The Impact

This is empirical research focusing on the impact of recycling sustainability on Organizational performance in Nigeria. To achieve the objective of this study, a sample of 10 publishing houses in four major cities in Delta State was adopted, and these cities include Asaba, Warri, Sapele, and Oghara. Given that Nigeria is the regional publishing powerhouse in West Africa with newspaper publications selling in the whole region, likewise, textbook publishers in Nigeria dominate the regional market. The industry contributes about 10% of the GDP and is one of the fastest-growing in the manufacturing sector. Unfortunately, Nigeria does not produce most of the raw materials for publishing. All paper materials used in Nigeria are imported, and the costs are rising with the reliability of the sources dwindling. In addition, the publishing industry in Nigeria is faced with a high rate of waste and returns. The study focused on the impact of adopting recycling sustainability as a possible solution to the dwindling raw materials, increasing costs, and high rate of returns. It used a stratified random sampling approach and a descriptive research design. 

scholarly journals Green Packaging from Consumer and Business Perspectives

2021 ◽  
Vol 13 (3) ◽  
pp. 1356
Author(s):  
Gonzalo Wandosell ◽  
María C. Parra-Meroño ◽  
Alfredo Alcayde ◽  
Raúl Baños
Keyword(s):  
Sustainable Development ◽  
Raw Materials ◽  
Research Activity ◽  
Word Clouds ◽  
Climate Action ◽  
Green Packaging ◽  
Materials Used ◽  
Societal Challenge ◽  
Corporate Social ◽  
The Impact

Sustainable development is a global objective that aims to address the societal challenge of climate action, the environment, resource efficiency, and raw materials. In this sense, an important strategy is the promotion of green packaging, that is, the use of sustainable materials and designs for the packaging of goods. In recent years, many research works have been published in the specialised area covering the different perspectives and dimensions of green packaging. However, to our knowledge, no previous investigations have analysed the research activity on green packaging from business and consumer perspectives. The present study intends to fill this gap by analysing all of the publications found in the Scopus database with the help of visual analytic tools, including word clouds and Gephi network visualization software. More specifically, our study analyses the impact of green packaging from business and consumer viewpoints, including some specific issues such as the design and materials used in green packaging, green packaging costs, marketing strategies and corporate social responsibility related to green packaging, and the impact of green packaging in waste management, the circular economy, logistics, and supply chain management. The results obtained reveal the growing interest of scholars and researchers in all of these dimensions, as is made patently clear by the increasing number of journal publications in recent years. The practical implications of this study are significant, given the growing awareness among companies and consumers about the importance of the promotion of sustainable development through green packaging alternatives. More specifically, the results of this research could be very useful for all of those agents who are interested in learning about the main lines of research being developed in the field of green packaging.

CRM dimensions and performance of SMEs in Yemen: the moderating role of human capital

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nagwan Abdulwahab AlQershi ◽  
Sany Sanuri Mohd Mokhtar ◽  
Zakaria Bin Abas
Keyword(s):  
Developing Countries ◽  
Human Capital ◽  
Knowledge Management ◽  
Organizational Performance ◽  
Manufacturing Sector ◽  
Moderating Effect ◽  
Customer Focus ◽  
Content Type ◽  
The Impact ◽  
Key Customer

PurposeThis paper examines the interaction of human capital and CRM on the performance of SMEs in Yemen.Design/methodology/approachThe study used a quantitative approach in investigating the interacting effect of human capital on the relationship between CRM and SMEs' performance in Yemen. The PLS-SEM analysis was performed to test the hypotheses.FindingsIt was observed that key customer focus, technology-based CRM and CRM knowledge management were effective drivers of SME performance, but not CRM organization tools. It was also ascertained that human capital has no moderating effect on the key customer focus and knowledge management relationships with performance, although it does moderate the relationships between performance and CRM organization and technology-based CRM respectively.Research limitations/implicationsBecause this study is limited to manufacturing SMEs in Yemen, the results cannot be generalized to other types of industry such as services, whose structure and vision differ from those of manufacturing SMEs. While the current results may be appropriate for SMEs in other developing countries, the researcher believes they are unsuitable for SMEs in advanced economies with different financial structures and employee and management cultures.Practical implicationsThe empirical insights of this study are valuable for the owners, managers and professionals in the SMEs manufacturing sector in developing countries, to enrich their organizational performance through CRM adoption, while considering the moderating effect of human capital.Originality/valueThis is the first empirical work to confirm way the main drivers of human capital, including in the analysis the impact of CRM dimensions and SME performance, in the context of the manufacturing sector. In support of an original conceptual model, the insights contribute to the literature on CRM, SMEs in the manufacturing sector, human capital and emerging economies.

Comparison of Mechanical Properties of Fly Ash Artificial Geopolymer Aggregates with Natural Aggregate

2015 ◽  
Vol 754-755 ◽  
pp. 290-295 ◽  
Author(s):  
Alida Abdullah ◽  
Ku Amirrul Rahman Ku Yin ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Kamarudin Hussin ◽  
Mien Van Tran
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Specific Gravity ◽  
Water Absorption ◽  
Raw Materials ◽  
Construction Materials ◽  
High Water ◽  
Natural Aggregate ◽  
Materials Used ◽  
The Impact

This study was conducted to compare the mechanical properties of fly ash artificial geopolymer aggregates with natural aggregate (rock) in term of its impact strength, specific gravity and water absorption.The raw materials used were fly ash, sodium hydroxide, sodium silicate and natural aggregate. After the artificial geopolymer aggregate has been produced, its water absorption, specific gravity and aggregate impact test has been done. All results obtained were compared to natural aggregate. The result shows that the fly ash geopolymer aggregate are lighter than natural aggregate in term of its specific gravity. The impact value for fly ash artificial geopolymer aggregate slightly high compared to natural aggregate while it has high water absorption value compared to natural aggregate. As conclusion, the fly ash artificial geopolymer aggregate can be used as one of the construction materials in concrete as an alternative for coarse aggregate besides natural aggregate with more lightweight properties.

scholarly journals DEVELOPMENT OF IMPACT RESISTANT POLYMER COMPOSITION ABS/PC FOR AUTOMOTIVE INDUSTRY

2021 ◽  
Vol 6 (2) ◽  
pp. 80-88
Author(s):  
I. Yagrushkina ◽  
M. Dyul'dina ◽  
A. Nogachev ◽  
K. Yakunin
Keyword(s):  
Automotive Industry ◽  
Raw Materials ◽  
Polymer Composite Material ◽  
Polymer Materials ◽  
Polymer Composition ◽  
Component Ratio ◽  
Mixed Composition ◽  
Materials Used ◽  
The Cost ◽  
The Impact

Polymer and composite materials are becoming more and more widely used in the Russian automotive industry. The Russian market of polymer materials for automotive components is characterized by an insufficiently developed production of some types of such materials. And, as a result, the use of imported materials. Styrene plastics are one of the innovative materials for the automotive industry. Using them in a car makes the product more attractive to customers. The use of this type of plastics allows to create a new look for the car. This applies to both the interior and exterior. The aim of this work is to develop the composition of a polymer composition based on ABS plastic from domestic raw materials. In addition, the new mixed composition should replace imported mixed compositions or contain a minimum amount of imported components of the composition, which will significantly reduce the cost of products and accordingly the car. The article analyzes the polymer materials used in the automotive industry. The disadvantages of using these materials in their pure form are revealed. The selection of the components of the composition of the impact-resistant material with the development of its formulation has been made. The composition of an impact-resistant polymer composition based on ABS plastic and PC has been developed, which is not inferior in terms of the complex of properties to the imported material. The influence of the composition of ABS-plastic, various grades of polycarbonate, their ratio in the polymer composite material on the physical, mechanical and technological properties of the obtained composition has been investigated. It is shown that the best set of properties is possessed by a material based on 2020-30 ABS-plastic and PC-3S polycarbonate with a component ratio of 70%:30%.

scholarly journals Study of regime parameters of the fermenter in the production of biogas from animal liquid waste materials

2021 ◽  
Vol 286 ◽  
pp. 02010
Author(s):  
Penka Zlateva ◽  
Angel Terziev ◽  
Krastin Yordanov
Keyword(s):  
Anaerobic Fermentation ◽  
Biogas Production ◽  
Raw Materials ◽  
Organic Fertilizer ◽  
Liquid Waste ◽  
Ambient Air ◽  
Chicken Manure ◽  
Pig Manure ◽  
Materials Used ◽  
The Impact

The focus of the present study is a small biogas power plant for anaerobic fermentation of several types of animal waste raw materials used for biogas production. The impact of some of the characteristics of substances such as composition, temperature, humidity, and pH of the mixture in the bioreactor has been considered. The above is vital for optimizing the fermentation process, and also to improve the biogas production process. The plant is located in Northeastern Bulgaria and the raw liquid manure is supplied by several neighboring small farms. The annual quantities of raw waste are as follows: cow manure - 1252 t / a; chicken manure - 427 t / a and pig manure - 639 t / a. The manure is collected in a preliminary tank and then pumped to the bioreactor. The fermenter itself is a hermetically sealed and thermally insulated tank where constant temperature is maintained. It is equipped with a stirring system, which helps the mixing and homogenization of the substrate. The tests were performed during three charges of the installation. The fermentation takes approximately 23 up to 25 days. The experiments were performed during the summer and autumn seasons when the ambient air temperature varies from 28 to 45 °C. The biogas can be used as an energy carried as the obtained organic fertilizer is suitable for agriculture purposes.

scholarly journals Research on the Production of Composite Fuel on the Basis of Fine-Grained Coal Fractions and Biomass—The Impact of Process Parameters and the Type of Binder on the Quality of Briquettes Produced

Minerals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 31 ◽  
Author(s):  
Michał Rejdak ◽  
Jolanta Robak ◽  
Agata Czardybon ◽  
Karina Ignasiak ◽  
Piotr Fudała
Keyword(s):  
Raw Materials ◽  
Wide Spectrum ◽  
Potato Starch ◽  
Mixing Time ◽  
Extrusion Process ◽  
Cellulose Derivatives ◽  
Fine Grained ◽  
Mechanical Durability ◽  
Materials Used ◽  
The Impact

This paper presents the partial results of a study on obtaining compacted fuel from fine-grained coal fractions and biomass. The aim of the study was to determine the impact of selected parameters of the extrusion process and the applied binder (mechanical durability and density of the products). The fuels were formulated using the extrusion process. Raw materials used in the research were: Fine-grained coal (flotation concentrates), biomass (hydrolytic lignocellulose), and a wide spectrum of organic and mineral binders and their compositions. During the investigations, the variable factors were the following: Extrusion pressure, preparation of the mixtures for extrusion (mixing time and temperature of the mixture), composition of the extruded mixtures (share of fine-grained coal and biomass and type of binder). It was found that it is possible to extrude mechanically durable briquettes from mixtures containing fine-grained coal products and biomass. Under the conditions of the experiment, the most favorable mechanical durability was characterized by briquettes containing in their composition 90% of coal and 6% of biomass (in relation to the dry state). The briquettes with the most favorable physico-mechanical properties were obtained using organic binders—Starch (based on wheat and potato starch) and cellulose derivatives.

SIFAT FISIK DAN MEKANIK PAPAN PARTIKEL DARI LIMBAH PLASTIK JENIS HDPE (High Density Polyetylene) DAN RANTING/CABANG KARET (Hevea brasiliensis Muell.Arg)

2011 ◽  
Vol 3 (1) ◽  
pp. 7
Author(s):  
Sari Mirad Noor
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Raw Materials ◽  
Urea Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Plastic Waste ◽  
High Density ◽  
Different Types ◽  
Materials Used ◽  
The Impact

The need of log increace rapidly, mean while forest product decrease, so efficiency on wood process should be done wisely, in the other hand plastic waste is uncompossed material, become an environmental problems. This research aims to determine the impact of particles of type HDPE plastic wastes and twigs/branches of rubber on some physical and mechanical properties of wood. Physical properties have been tested for water content, density, thickness, and water absorption. Although mechanical properties tests were tough Broken/Module of Rufture (MOR) and the preservation of architecture/modulus of elasticity (MOE).     The raw materials used are polyethylene of high density of waste plastic and rubber adhesive urea formaldehyde branch branch. Experimental design used the randomized Completely Design (RCD) 5 x 4, in which each treatment became much like 5 times replicated).The treatment used is the diversity of the composition of the waste of plastic of different types of polyethylene of high density provides a significant effect on the content of water, water absorption, the density and the development of thickness. With regard to the persistence and the fracture of the arch determination not to give a significant effect.Keywords: physical and mechanical properties, particle board, HDPE plastic waste, branch/twig of  rubber.

INFLUENCE OF COMMERCIAL BANKS IN THE STRATEGIC DEVELOPMENT OF THE PROCESSING INDUSTRY

2020 ◽  
Vol 20 (1) ◽  
pp. 171-176
Author(s):  
Omurbek Imaraliev ◽  
◽  
Takhmina Ergeshova ◽  
Aidana Tologon kyzy ◽  
◽  
...  
Keyword(s):  
Financial Institutions ◽  
Commercial Banks ◽  
Cluster Model ◽  
Raw Materials ◽  
Manufacturing Sector ◽  
Strategic Development ◽  
Processing Industry ◽  
Entrepreneurial Skills ◽  
Manufactured Products ◽  
The Impact

This article has expanded the areas of strategic development of the processing industry and the impact of commercial banks on their development. For the development of the manufacturing sector, it is necessary to accumulate stable reserves of raw materials, as well as to regulate the export and sale of manufactured products. This requires educated personnel with entrepreneurial skills and financial support from financial institutions. Thus, the development of a special cluster model and will unite them to work on this model has on the development of the processing industry, on their competitiveness and the state of competition. The main elements of this cluster model are commercial financial institutions, i.e. cans. In this article, the influence of the cluster model on the strategic development of the processing industry was proved scientifically, practically and methodologically.

Determinants of Exports Behaviour of India’s Agro-processing Firms: Role of Technology, Imported Raw Materials and Logistics Infrastructure

2021 ◽  
pp. 097226292098144
Author(s):  
Suresh Ramaiah ◽  
Gopal Krishna Roy
Keyword(s):  
Raw Materials ◽  
Manufacturing Sector ◽  
Sample Selection ◽  
Export Intensity ◽  
Capital Goods ◽  
Exporting Firms ◽  
Export Behaviour ◽  
Materials Used ◽  
Managerial Quality

Despite accounting for a sizeable share in the overall output and employment of the manufacturing sector, the export potential of India’s Agro-processing firms has received less attention. This article investigates the determinants of export propensity and intensity of relatively labour-intensive agro-processing firms in India with a focus on the role of technology adopted, the proportion of imported raw materials used and status of the logistics infrastructure at the location of the firm. The article makes use of the CMIE-PROWESS dataset to obtain a cross-section of agro-processing firms for the year 2016–2017 and the Logistic Ease Across Different States (LEADS) database. The empirical strategy involves the Heckman two-step process to address the sample selection bias originating in modelling export behaviour. The article finds that the likelihood of an agro-processing firm to enter the exporting market increases with an increase in technology enhancing investment in terms of expenditure on research and development and import of capital goods. Moreover, a better level of logistics infrastructure enhances the likelihood of exporting. The likelihood of a firm to export also increases with the increase in the use of imported raw materials, firm size, age and superior managerial quality. However, the paper finds only the expenditure on imported capital goods and imported raw materials to be positively and significantly associated with the export intensity of the exporting firms.

scholarly journals Globalization’s Impact on the Usages of Imported and Local Building Materials in Jordan

2019 ◽  
Vol 8 (10) ◽  
pp. 971-975
Keyword(s):  
Design Process ◽  
Building Materials ◽  
Raw Materials ◽  
Study Data ◽  
Noticeable Increase ◽  
Materials Used ◽  
The Impact ◽  
The Relationship ◽  
Local Materials

The process of choosing building materials is an essential part of the design process. Whenever architects and interior designers start to think about a project, one of the first things they consider is the materials that will be used in the production of the project. There is little research exploring the impact of globalization on the level of using imported and local building materials in Jordan. Therefore, it is necessary to examine the impact of globalization on the level of using imported and local building materials in Jordan and explore the impact of using imported building materials on the level of using local building materials in Jordan. For the purpose of this study, data gathered about the usage of imported building materials in Jordan and analyzed to observe any drops of rises of using specific building materials. Also, this data was used to understand the most common imported building materials used. This study requires a total understanding of the relationship between globalization and building materials and their impact on the economy and the usage of imported and local building materials. comprehension of this relationship will make it possible to find solutions to integrate the use of imported building materials and local materials. Globalization impact can be observed in other sectors in Jordan. The building materials market is being affected by the phenomenon of globalization. It was found that there is a noticeable increase in imported building materials or raw materials that are needed to manufacture building materials. If the attitude toward the usage of local building materials in Jordan keep decreases and relying on imported building materials in the construction section, there will be a recession in the local building materials in Jordan. Having this recession will have a greater impact on the building materials and local factories in the long term.

Sign in / Sign up

Export Citation Format

Share Document