Biosorption of lead by Bacillus licheniformis isolated from E-waste landfill, Hyderabad, Telangana, India.

2017 ◽  
Vol 6 (2) ◽  
pp. 5240
Author(s):  
Gayatri Y* ◽  
Shailaja Raj M. ◽  
Vijayalakshmi B.
Keyword(s):  
Bacillus Licheniformis ◽  
Room Temperature ◽  
Electronic Waste ◽  
Medium Temperature ◽  
Basic Resource ◽  
Dump Yard ◽  
Main Components ◽  
Life On Earth ◽  
Day By Day

Soil, the basic resource for the life on earth is getting polluted because of the release of different contaminants into it. So, the reduction of soil pollution is the main thrust of most researchers. The contaminants include different components released from different industries and the waste is getting accumulated in the soil because of improper processing. Electronic waste is the most up growing waste in the world. As the electronic industries are progressing the waste that is produced after the usage of the products is also increasing day by day. As a result, the heavy metals which are the main components in electronic goods leach and accumulate in the soil because of informal processing procedures. Poisonous substances such as lead, tin, mercury, cadmium and barium which are the constituents of the electronic goods get discharged into the environment and cause serious health and pollution problems if the electronic waste is not processed properly. The present study focuses on biosorption of lead, an important component of many electronic goods by Bacillus licheniformis isolated from E-waste dump yard soil in Hyderabad, Telangana, India. The adsorption studies were carried out using Atomic adsorption spectrophotometer. The adsorption capability of Bacillus licheniformis with different metal concentrations ranging from 10ppm to 25ppm was analyzed and it was observed that the bacteria could reduce 74.94% of 10ppm, 78.9% of 15ppm, 83% of 20ppm and 89.39% of 25ppm lead from the medium. Temperature has a prominent role in metal adsorption by bacteria. At 310C and 370C the adsorption was high. The % of metal adsorbed at 160C was 30.56%, at 310C (Room Temperature) was 56.54 % at 370C was 58.79% and at 60 0C it was 36.31%. The present study is proposed to explore bacteria for the determination of their tolerance capacity in and around the areas of Hyderabad where heavy metal ions are leached and observe for their biotransformation capabilities. 

Electron Microscopy of Human Gallstones

1971 ◽  
Vol 29 ◽  
pp. 296-297
Author(s):  
C. Wolpers ◽  
R. Blaschke
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Bile Pigment ◽  
X Ray Diffraction ◽  
Triclinic Crystal System ◽  
X Ray ◽  
Follow Up Study ◽  
Infra Red ◽  
Main Components

Scanning microscopy was used to study the surface of human gallstones and the surface of fractures. The specimens were obtained by operation, washed with water, dried at room temperature and shadowcasted with carbon and aluminum. Most of the specimens belong to patients from a series of X-ray follow-up study, examined during the last twenty years. So it was possible to evaluate approximately the age of these gallstones and to get information on the intensity of growing and solving.Cholesterol, a group of bile pigment substances and different salts of calcium, are the main components of human gallstones. By X-ray diffraction technique, infra-red spectroscopy and by chemical analysis it was demonstrated that all three components can be found in any gallstone. In the presence of water cholesterol crystallizes in pane-like plates of the triclinic crystal system.

Interactions Between Al and Cr Thin Films

1976 ◽  
Vol 34 ◽  
pp. 638-639
Author(s):  
R. M. Anderson ◽  
T. M. Reith ◽  
M. J. Sullivan ◽  
E. K. Brandis
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Vacuum System ◽  
Processing Temperature ◽  
Diffusion Couples ◽  
Electronic Circuits ◽  
Intermetallic Formation ◽  
Si Substrates ◽  
Aluminum Silicon

Thin films of aluminum or aluminum-silicon can be used in conjunction with thin films of chromium in integrated electronic circuits. For some applications, these films exhibit undesirable reactions; in particular, intermetallic formation below 500 C must be inhibited or prevented. The Al films, being the principal current carriers in interconnective metal applications, are usually much thicker than the Cr; so one might expect Al-rich intermetallics to form when the processing temperature goes out of control. Unfortunately, the JCPDS and the literature do not contain enough data on the Al-rich phases CrAl7 and Cr2Al11, and the determination of these data was a secondary aim of this work.To define a matrix of Cr-Al diffusion couples, Cr-Al films were deposited with two sets of variables: Al or Al-Si, and broken vacuum or single pumpdown. All films were deposited on 2-1/4-inch thermally oxidized Si substrates. A 500-Å layer of Cr was deposited at 120 Å/min on substrates at room temperature, in a vacuum system that had been pumped to 2 x 10-6 Torr. Then, with or without vacuum break, a 1000-Å layer of Al or Al-Si was deposited at 35 Å/s, with the substrates still at room temperature.

STEM and ELS Observation of Early Oxide Formation on the Surface of Cr Thin Films

1980 ◽  
Vol 38 ◽  
pp. 412-413
Author(s):  
Fumio Watari ◽  
J. M. Cowley
Keyword(s):  
Thin Films ◽  
Optical System ◽  
Room Temperature ◽  
Oxide Formation ◽  
Initial Nucleation ◽  
Diffraction Patterns ◽  
Relationship Of ◽  
Multiple Twinning ◽  
Moderately High Temperature

STEM coupled with the optical system was used for the investigation of the early oxidation on the surface of Cr. Cr thin films (30 – 1000Å) were prepared by evaporation onto the polished or air-cleaved NaCl substrates at room temperature and 45°C in a vacuum of 10−6 Torr with an evaporation speed 0.3Å/sec. Rather thick specimens (200 – 1000Å) with various preferred orientations were used for the investigation of the oxidation at moderately high temperature (600 − 1100°C). Selected area diffraction patterns in these specimens are usually very much complicated by the existence of the different kinds of oxides and their multiple twinning. The determination of the epitaxial orientation relationship of the oxides formed on the Cr surface was made possible by intensive use of the optical system and microdiffraction techniques. Prior to the formation of the known rhombohedral Cr2O3, a thin spinel oxide, probably analogous to γ -Al203 or γ -Fe203, was formed. Fig. 1a shows the distinct epitaxial growth of the spinel (001) as well as the rhombohedral (125) on the well-oriented Cr(001) surface. In the case of the Cr specimen with the (001) preferred orientation (Fig. 1b), the rings explainable by spinel structure appeared as well as the well defined epitaxial spots of the spinel (001). The microdif fraction from 20A areas (Fig. 2a) clearly shows the same pattern as Fig. Ia with the weaker oxide spots among the more intense Cr spots, indicating that the thickness of the oxide is much less than that of Cr. The rhombohedral Cr2O3 was nucleated preferably at the Cr(011) sites provided by the polycrystalline nature of the present specimens with the relation Cr2O3 (001)//Cr(011), and by further oxidation it grew into full coverage of the rest of the Cr surface with the orientation determined by the initial nucleation.

Review of the Current State and Future Development in Standardizing Natural Lighting in Interiors

2018 ◽  
pp. 5-26 ◽  
Author(s):  
Stanislav Darula
Keyword(s):  
Human Life ◽  
Natural Light ◽  
Artificial Lighting ◽  
Computer Tools ◽  
Natural Lighting ◽  
Current State ◽  
Minimum Requirements ◽  
Life On Earth ◽  
Window Design

Three elements mainly wind, water and sun seemed to determine in ancient ages the basic phenomena of life on Earth. Architectural history documented the importance of sun influence on urban and building construction already in layouts of Mesopotamian and Greek houses. Not only sun radiation but especially daylight played a significant role in the creation of indoor environment. Later, in the 20th century, a search of interaction between human life in buildings and natural conditions were studied considering well­being and energy conscious design recently using computer tools in complex research and more detail interdisciplinary solutions. At the same time the restricted daytime availability of natural light was supplemented by more efficient and continually cheaper artificial lighting of interiors. There are two main approaches to standardize the design and evaluation of indoor visual environment. The first is based on the determination of the minimum requirements respecting human health and visibility needs in all activities while the second emphasizes the behaviour and comfort of occupants in buildings considering year­around natural changes of physical quantities like light, temperature, noise and energy consumption. The new current standardization basis for daylight evaluation and window design criteria stimulate the study of methodology principles that historically were based on the overcast type of sky luminance pattern avoiding yearly availability of sky illuminance levels. New trends to base the daylight standardization on yearly or long­term availability of daylight are using the averages or median sky illuminance levels to characterise local climatological conditions. This paper offers the review and discussion about the principles of the natural light standardization with a short introduction to the history and current state, with a trial to focus on the possible development of lighting engineering and its standards in future.

A New Method for Direct Determination of the Recoilless Fraction with Application to Magnetic Nanoparticles

2002 ◽  
Vol 721 ◽  
Author(s):  
Monica Sorescu
Keyword(s):  
Room Temperature ◽  
Average Particle Size ◽  
Direct Determination ◽  
Average Particle ◽  
Lattice Method ◽  
Recoilless Fraction ◽  
Single Room ◽  
Magnetite Particles ◽  
Physical Mixtures

AbstractWe propose a two-lattice method for direct determination of the recoilless fraction using a single room-temperature transmission Mössbauer measurement. The method is first demonstrated for the case of iron and metallic glass two-foil system and is next generalized for the case of physical mixtures of two powders. We further apply this method to determine the recoilless fraction of hematite and magnetite particles. Finally, we provide direct measurement of the recoilless fraction in nanohematite and nanomagnetite with an average particle size of 19 nm.

Single Crystal Growth of High-Pressure Phases of Ice and Salt Hydrate Far Below the Original Melting Point by Mixing Alcohol: Crystal Structure Determination of Magnesium Chloride Heptahydrate

2020 ◽  
Author(s):  
Keishiro Yamashita ◽  
Kazuki Komatsu ◽  
Hiroyuki Kagi
Keyword(s):  
Crystal Structure ◽  
High Pressure ◽  
Crystal Growth ◽  
Single Crystal ◽  
Room Temperature ◽  
Growth Technique ◽  
Salt Hydrate ◽  
X Ray

An crystal-growth technique for single crystal x-ray structure analysis of high-pressure forms of hydrogen-bonded crystals is proposed. We used alcohol mixture (methanol: ethanol = 4:1 in volumetric ratio), which is a widely used pressure transmitting medium, inhibiting the nucleation and growth of unwanted crystals. In this paper, two kinds of single crystals which have not been obtained using a conventional experimental technique were obtained using this technique: ice VI at 1.99 GPa and MgCl<sub>2</sub>·7H<sub>2</sub>O at 2.50 GPa at room temperature. Here we first report the crystal structure of MgCl2·7H2O. This technique simultaneously meets the requirement of hydrostaticity for high-pressure experiments and has feasibility for further in-situ measurements.

Sign in / Sign up

Export Citation Format

Share Document