Speed Sensing Machine using Arduino
There are certain rules that some authorities have introduced in case of violation of fastmoving vehicles. Most importantly determine any country regulation on certain roads that is, you will be breaking the law if the speed of your car exceeds this the limit. IR sensors are a large part of a project that detects car speed. Generally, you will be able to use set up IR Sensors on many ways but during this project, we used 2 IR Sensors models and set them 10cm apart. When the moving vehicle reaches the main sensor, the IR Sensor is activated. From this moment on, the timer has been started and can still save time until the car reaches the 2nd IR sensor. By imitating the gap in the middle 2 sensors at 5 meters, you will count the speed at which the vehicle has moved from 1st IR Sensor to 2nd IR Sensor as expected to verify the detection in kmph. All statistics and data collection are done in Arduino and therefore the end is shown in the 16X2 LCD display. This route was introduced to detect the speed of the car or a person in general and a warning to people who go along with providing an automatic buzzer. Currently, a RADAR gun or LIDARs are widely used to speed up the acquisition but require someone to pull the impact of finding speed. during this work it has been proven that automation provides better performance than human management system.