scholarly journals Application of AHP and GRA methods in energy efficiency potential’s assessment of envelopes from natural materials

2020 ◽  
Vol 2020 (2) ◽  
pp. 48-62
Author(s):  
Yuriy Biks ◽  
◽  
Georgiy Ratushnyak ◽  
Olga Ratushnyak ◽  
Pavlo Ryapolov ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Building Materials ◽  
Influence Factors ◽  
Thermal Inertia ◽  
Pairwise Comparison ◽  
Weighting Method ◽  
Total Thermal Resistance ◽  
Energy Efficiency Potential ◽  
Wall Assembly

The best choice of energy efficient envelope from variety of available materials is still the challenge. Therefore, the attempt of thermal performance multi-criteria evaluation of some building materials of natural origin for energy-efficient envelopes is conducted in present paper. Such types of walls from natural energy-efficient materials are considered in comparison assessment: hempcrete, adobe, strawbale panel, earthbag, cordwood, SIP (plywood+ecofiber), hempcrete+straw and energy efficient block. The influence of thermal inertia time, internal areal heat capacity, as well dimensionless index of thermal inertia D, the total thermal resistance of the walls Rtot-value, mass of the wall assembly and its cost have been taken into consideration as important influence factors. The multi-criteria numerical assessment of envelope’s energy efficiency potential was performed by two popular methods – Analytic Hierarchy Process (AHP) as the subjective weighting method and Grey Relation Analysis (GRA) as the objective weighting method. Both of methods allow to arrange the alternatives and could be applied as decision support tools in decision making (DM) process of choosing the best alternative in terms of multi-criteria assessment. For more objective analysis, by taking into account the variety of physical and physical-mechanical parameters of the wall assembly material, the concept of generalized index of the envelope energy efficiency potential is proposed. Conducted research has shown that the best envelope type in terms of of generalized index of energy efficiency potential has the hempcrete wall and hemcrete+straw wall, almost three times smaller has the wall of the earthbags. The walls from adobe, cordwood and strawbale panels have practically the equal value of generalized index of energy efficiency potential. It could be observed that AHP method shown more inhomogeneous results, than GRA. The possible reason for that is the difference in evaluation attitude in techniques - AHP is considered as the subjective method with pairwise comparison matrixes, while GRA is objective method of comparison.

scholarly journals Thermal Characteristics of New Building Materials and their Effect upon the Energy Efficiency

2008 ◽  
Vol 45 (3) ◽  
pp. 3-13
Author(s):  
J. Ekmanis ◽  
V. Zebergs ◽  
N. Zeltins ◽  
V. Vrublevski
Keyword(s):  
Energy Efficiency ◽  
Heat Capacity ◽  
Thermal Resistance ◽  
Energy Supply ◽  
Heat Supply ◽  
Building Materials ◽  
Thermal Characteristics ◽  
Thermal Inertia ◽  
Extreme Conditions

Thermal Characteristics of New Building Materials and their Effect upon the Energy Efficiency The paper formulates the role of thermal inertia of the building materials in the energy supply of buildings and in solution of the energy efficiency problems. The evolution of construction entails the application of new building materials as well as of glazed surfaces in the envelopes of buildings. An analysis is made of the influence of the thermal resistance of building materials and their heat capacity on the thermal inertia indicators of buildings. An inertia scale of buildings has been developed for the choice of the heat supply capacities of buildings at low outdoor temperatures under extreme conditions of the Latvian climate. The ratio of the ventilation capacities has been analysed in the total heating balance at a low thermal inertia of buildings. The significance of innovative ventilation technologies for raising the energy efficiency has been considered.

scholarly journals Economic Indicators Improvement due to the Introduction of Energy-Efficient Technologies

2019 ◽  
Vol 124 ◽  
pp. 05045
Author(s):  
E.K. Nikolaeva ◽  
N.A. Yudina ◽  
T.U. Dunaeva ◽  
S.A. Livshits ◽  
S.R. Enikeeva
Keyword(s):  
Energy Efficiency ◽  
Program Implementation ◽  
Energy Efficient ◽  
Power Engineering ◽  
Economic Indicators ◽  
Engineering Economics ◽  
The Government ◽  
Energy Efficiency Potential

The paper describes issues concerning energy efficiency improving in the Russian power engineering economics. The energy efficiency applicability, the technical and the economic energy efficiency potential, the government energy efficiency tools are substantiated. The results of energy efficiency program implementation are presented.

Comparison of Energy Efficiency of traditional Brick Wall and Inco- Panel Wall: A Case Study of Hotel Sarowar in Pokhara

2020 ◽  
Vol 15 (3) ◽  
pp. 57-61
Author(s):  
Bishnu Hari Bhattarai ◽  
Bharat Raj Pahari ◽  
Sanjeev Maharjan
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
Building Materials ◽  
Energy Performance ◽  
Wall Material ◽  
Brick Wall ◽  
Plastic Composite ◽  
Effective Manner ◽  
Energy Efficient Building ◽  
Reducing Energy

Energy efficiency is understood to mean the utilization of energy in the most cost-effective manner to carry out process or provide a service, whereby energy waste is minimized, and the overall consumption of primary energy resources is reduced. Various measures can be employed to attain energy efficiency in building such as reducing demands for heating, cooling, lighting, consumption for office equipment and appliances demand, reducing energy requirement for ventilation, using energy efficient building materials. An energy efficient home is designed to keep out the wind and rain while reducing energy waste. Modern homes are built with variety of different materials. They are no longer built using only bricks and mortar. A wide variety of energy efficient building materials are now available. Recycled Steel, Insulating Concrete Forms, Plant-based Polyurethane Foam, Straw Bales, Structural Insulated Panels, Plastic Composite Lumber, Vacuum Insulation Panels, Inco-panel are among alternatives available. Among those various wall materials, energy performance analysis in terms of heating and cooling load is done in this thesis. For this study, under construction Hotel Sarowar is chosen for analysis. This study compares heat transfer on the building when Inco-panel is used as wall material and conventional brick masonry is used as wall material. The heat transfers through those walls are calculated using MS Excel and ANSYS Software.

Analysis Criteria for Choosing Energy Efficient High-Quality Light Sources and Luminaires

2018 ◽  
pp. 113-119
Author(s):  
Gennady Ya. Vagin ◽  
Eugene B. Solntsev ◽  
Oleg Yu. Malafeev
Keyword(s):  
Energy Efficiency ◽  
Energy Efficient ◽  
National Standards ◽  
Light Sources ◽  
The European Union ◽  
High Quality ◽  
Eu Directive ◽  
The World ◽  
A New Technique ◽  
Energy Labelling

The article analyses critera applying to the choice of energy efficient high quality light sources and luminaires, which are used in Russian domestic and international practice. It is found that national standards GOST P 54993–2012 and GOST P 54992– 2012 contain outdated criteria for determining indices and classes of energy efficiency of light sources and luminaires. They are taken from the 1998 EU Directive #98/11/EU “Electric lamps”, in which LED light sources and discharge lamps of high intensity were not included. A new Regulation of the European Union #874/2012/EU on energy labelling of electric lamps and luminaires, in which these light sources are taken into consideration, contains a new technique of determining classes of energy efficiency and new, higher classes are added. The article has carried out a comparison of calculations of the energy efficiency classes in accordance with GOST P 54993 and with Regulation #874/2012/EU, and it is found out that a calculation using GOST P 54993 gives underrated energy efficiency classes. This can lead to interdiction of export for certain light sources and luminaires, can discredit Russian domestic manufacturer light sources and does not correspond to the rules of the World Trade Organization (WTO).

Performance Analysis of TBC-ACO Routing Protocol with Existing Routing Protocols of Wireless Sensor Networks

2017 ◽  
Vol 7 (8) ◽  
pp. 169
Author(s):  
A. Radhika ◽  
D. Haritha
Keyword(s):  
Energy Efficiency ◽  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Swarm Intelligence ◽  
Routing Protocol ◽  
Routing Protocols ◽  
Energy Efficient ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Congestion Aware

Wireless Sensor Networks, have witnessed significant amount of improvement in research across various areas like Routing, Security, Localization, Deployment and above all Energy Efficiency. Congestion is a problem of  importance in resource constrained Wireless Sensor Networks, especially for large networks, where the traffic loads exceed the available capacity of the resources . Sensor nodes are prone to failure and the misbehaviour of these faulty nodes creates further congestion. The resulting effect is a degradation in network performance, additional computation and increased energy consumption, which in turn decreases network lifetime. Hence, the data packet routing algorithm should consider congestion as one of the parameters, in addition to the role of the faulty nodes and not merely energy efficient protocols .Nowadays, the main central point of attraction is the concept of Swarm Intelligence based techniques integration in WSN.  Swarm Intelligence based Computational Swarm Intelligence Techniques have improvised WSN in terms of efficiency, Performance, robustness and scalability. The main objective of this research paper is to propose congestion aware , energy efficient, routing approach that utilizes Ant Colony Optimization, in which faulty nodes are isolated by means of the concept of trust further we compare the performance of various existing routing protocols like AODV, DSDV and DSR routing protocols, ACO Based Routing Protocol  with Trust Based Congestion aware ACO Based Routing in terms of End to End Delay, Packet Delivery Rate, Routing Overhead, Throughput and Energy Efficiency. Simulation based results and data analysis shows that overall TBC-ACO is 150% more efficient in terms of overall performance as compared to other existing routing protocols for Wireless Sensor Networks.

MANUFACTURING OF ENERGY EFFICIENT SOLAR PANELS

2020 ◽  
Author(s):  
Андрей Дмитриевич Бухтеев ◽  
Виктория Буянтуевна Бальжиева ◽  
Анна Романовна Тарасова ◽  
Фидан Гасанова ◽  
Светлана Викторовна Агасиева
Keyword(s):  
Energy Efficiency ◽  
Solar Cells ◽  
Energy Efficient ◽  
Solar Panels

В данном обзоре приведены проблемы при использовании солнечных элементов и существующие решения этих проблем по повышению энергоэффективности фотоэлементов. Также сравнивается КПД этих солнечных элементов и рассматриваются их особенности. Одним из самых эффективных способов стало применение нанотехнологий. This review presents the problems of using solar cells and existing solutions to these problems to improve the energy efficiency of solar cells. The efficiency of these solar cells is also compared and their features are considered. One of the most effective methods was the use of nanotechnology.

Energy efficient biomorphic pulse information coding in electronic neurons for the entrance unit of the neuroprocessor

2019 ◽  
Vol 5 (3) ◽  
pp. 186-212 ◽  
Author(s):  
Alexander D. Pisarev
Keyword(s):  
Neural Networks ◽  
Energy Efficiency ◽  
Energy Efficient ◽  
Information Transfer ◽  
Biological Systems ◽  
Technological Parameters ◽  
Input Unit ◽  
Efficient Operation ◽  
Electric Circuits ◽  
Electronic Neuron

This article studies the implementation of some well-known principles of information work of biological systems in the input unit of the neuroprocessor, including spike coding of information used in models of neural networks of the latest generation.<br> The development of modern neural network IT gives rise to a number of urgent tasks at the junction of several scientific disciplines. One of them is to create a hardware platform&nbsp;— a neuroprocessor for energy-efficient operation of neural networks. Recently, the development of nanotechnology of the main units of the neuroprocessor relies on combined memristor super-large logical and storage matrices. The matrix topology is built on the principle of maximum integration of programmable links between nodes. This article describes a method for implementing biomorphic neural functionality based on programmable links of a highly integrated 3D logic matrix.<br> This paper focuses on the problem of achieving energy efficiency of the hardware used to model neural networks. The main part analyzes the known facts of the principles of information transfer and processing in biological systems from the point of view of their implementation in the input unit of the neuroprocessor. The author deals with the scheme of an electronic neuron implemented based on elements of a 3D logical matrix. A pulsed method of encoding input information is presented, which most realistically reflects the principle of operation of a sensory biological neural system. The model of an electronic neuron for selecting ranges of technological parameters in a real 3D logic matrix scheme is analyzed. The implementation of disjunctively normal forms is shown, using the logic function in the input unit of a neuroprocessor as an example. The results of modeling fragments of electric circuits with memristors of a 3D logical matrix in programming mode are presented.<br> The author concludes that biomorphic pulse coding of standard digital signals allows achieving a high degree of energy efficiency of the logic elements of the neuroprocessor by reducing the number of valve operations. Energy efficiency makes it possible to overcome the thermal limitation of the scalable technology of three-dimensional layout of elements in memristor crossbars.

Electric End-Use Energy Efficiency Potential in the U.S. Single-Family Housing Stock

2017 ◽  
Author(s):  
Eric Wilson ◽  
Craig Christensen ◽  
Scott Horowitz ◽  
Joseph Robertson ◽  
Jeff Maguire
Keyword(s):  
Energy Efficiency ◽  
Housing Stock ◽  
Single Family ◽  
Family Housing ◽  
End Use ◽  
Energy Efficiency Potential ◽  
The U.S

scholarly journals Determinants of Consumers’ Intentions towards the Purchase of Energy Efficient Appliances in Pakistan: An Extended Model of the Theory of Planned Behavior

2021 ◽  
Vol 13 (2) ◽  
pp. 565
Author(s):  
Muhammad Rizwan Ali ◽  
Muhammad Shafiq ◽  
Murad Andejany
Keyword(s):  
Energy Efficiency ◽  
Theory Of Planned Behavior ◽  
Planned Behavior ◽  
Energy Efficient ◽  
Behavioral Intentions ◽  
Partial Least Square ◽  
Least Square ◽  
Policy Implications ◽  
Extended Model ◽  
Awareness Campaigns

Amplified energy demand due to technologically advanced electrical and electronic appliances has accentuated the importance of energy efficiency to overcome energy shortage and environmental concerns. As adoption of energy efficient appliances depends on perception of the consumers, this study focuses on behavioral exploration of the consumers’ intentions towards the purchase of energy efficient appliances using an extended model of the theory of planned behavior (TPB). The study is based on a survey comprising 289 respondents. Partial least square (PLS) method is used to analyze the data. The results show that the attitude, perceived behavioral control, policy information campaigns, and past-purchase experiences significantly impact behavioral intentions of the consumers, whereas subjective and moral norms are insignificant in shaping behavioral intentions. Based on analyses, policy implications emphasizing (i) strong awareness campaigns, (ii) energy efficiency incentives, and (iii) replacement initiatives are proposed to help policy makers and administrators in achieving required goals of energy efficiency and conservation. The proposed research model and policy initiatives are a blueprint for synergies among policymakers, practitioners, and researchers in understanding and shaping consumers’ behaviors towards the purchase of energy efficient products, particularly, in developing countries.

scholarly journals Towards DC Energy Efficient Homes

2021 ◽  
Vol 11 (13) ◽  
pp. 6005
Author(s):  
Daniel Villanueva ◽  
Moisés Cordeiro-Costas ◽  
Andrés E. Feijóo-Lorenzo ◽  
Antonio Fernández-Otero ◽  
Edelmiro Miguez-García
Keyword(s):  
Energy Efficiency ◽  
Electric Vehicles ◽  
Energy Efficient ◽  
Electricity Consumption ◽  
Real Data ◽  
Mean Values ◽  
Led Lighting ◽  
Shed Light

The aim of this paper is to shed light on the question regarding whether the integration of an electric battery as a part of a domestic installation may increase its energy efficiency in comparison with a conventional case. When a battery is included in such an installation, two types of electrical conversion must be considered, i.e., AC/DC and DC/AC, and hence the corresponding losses due to these converters must not be forgotten when performing the analysis. The efficiency of the whole system can be increased if one of the mentioned converters is avoided or simply when its dimensioning is reduced. Possible ways to achieve this goal can be: to use electric vehicles as DC suppliers, the use of as many DC home devices as possible, and LED lighting or charging devices based on renewables. With all this in mind, several scenarios are proposed here in order to have a look at all possibilities concerning AC and DC powering. With the aim of checking these scenarios using real data, a case study is analyzed by operating with electricity consumption mean values.

Sign in / Sign up

Export Citation Format

Share Document