scholarly journals Modification of Digital Oil Pressure Measurement Equipment using Bluetooth Technology

2019 ◽  
Vol 13 (2) ◽  
pp. 103
Author(s):  
Rasma Rasma ◽  
Thomas Junaedi ◽  
Hendro Purwono ◽  
Riki Effendi
Keyword(s):  
Pressure Gauge ◽  
Measurement Methods ◽  
Hydraulic Pressure ◽  
Work Process ◽  
Diagnostic Instruments ◽  
Digital Pressure ◽  
Wide Range ◽  
Measurement Results ◽  
The Right ◽  
Selection Of

PT United Tractors Tbk Jakarta workshop held a lot of Machine Inspection Programs for Komatsu units. During the implementation of the Machine Inspection Program (PPM) the machine inspection program is one part of the maintenance that is carried out periodically to obtain accurate data on the condition of the equipment at the time by carrying out checks and adjustments using measurement methods and diagnostic instruments The use of a pressure gauge is still using manual and has a measurement distance that is still limited, if workers or mechanics are not equipped with sufficient knowledge then the pressure gauge will have the potential for error in use and the selection of a pressure gauge is not appropriate to the pressure gauge directly connected to the hydraulic pressure through the hose then the work process ppm is not enough 1 manpower. Therefore it is necessary to modify a digital pressure gauge that has a wide range of scales, in addition a wireless connection is needed to enable the operation of the unit and measurements are made 1 manpower and Bluetooth is one of the right choices in addition to the reach can be met in an application not too difficult so that readings measurement results can be connected directly via mobile.

scholarly journals ANALYSIS OF CREATING BENCHMARK IMAGES METHODS TO TEST THE ACCURACY OF PHOTOGRAMMETRIC SOFTWARE

2021 ◽  
Vol 26 (2) ◽  
pp. 47-55
Author(s):  
Alexander V. Komissarov ◽  
◽  
Valeriya V. Dedkova ◽  
Keyword(s):  
Aerial Survey ◽  
High Price ◽  
Work Time ◽  
Wide Range ◽  
Processing Accuracy ◽  
Survey Results ◽  
Classi Fication ◽  
The Right ◽  
Imagery Processing ◽  
Selection Of

Digital photogrammetry is based on the use of specialized photogrammetric software (or digital photogrammetric systems) to solve problems related to the aerospace imagery processing. A wide range of programs and high price motivate consumers to choose the right software that responds to requirements of processing accuracy, amount of work, time of execution, etc. The main goal of this study is to analyze the existing methods of benchmark images creating to test photogrammetric pro-grams. The article carries out the analysis of existing techniques of creating benchmark images, classi-fication, selection of benchmark images types suitable for testing of photogrammetric software, and substantiates the necessity for checking of aerial survey results quality in specialized software.

Choosing the Right “Bit Pad”: Human Factors Aspects of Digitizing Tablet Size

1982 ◽  
Vol 26 (7) ◽  
pp. 615-615
Author(s):  
James L. Knight
Keyword(s):  
Computer Graphics ◽  
Task Analysis ◽  
Movement Control ◽  
Human Movement ◽  
Optimum Size ◽  
Wide Range ◽  
The Right ◽  
Parameter Values ◽  
Selection Of ◽  
Digitizing Tablet

Entry of non-alphanumeric information into computer graphics systems is frequently accomplished by moving a drawing implement over the surface of a digitizing tablet. These tablets are commercially available in a wide range of sizes. Therefore, an important question from both ergonomic and economic standpoints concerns the optimum size for the digitizing tablet. To answer this question, models of human movement control were applied to the graphic operator's task. An experiment was conducted to obtain appropriate model parameter values and to empirically evaluate the resulting predictions of the generated models. A combination of task analysis and movement control modelling thus allowed selection of an optimum digitizing tablet size for a range of computer-graphics entry tasks. Details and results of this methodology will be presented.

scholarly journals A Two-Mode Digital Pressure Meter Equipped With An Automatic Leak Test Using MPX5050gp And MPXv4115vc6u Sensors

2020 ◽  
Vol 2 (2) ◽  
pp. 80-85
Author(s):  
Fita Florensa Rooswita ◽  
Triana Rahmawati ◽  
Syaifudin Syaifudin
Keyword(s):  
Negative Pressure ◽  
Digital Data ◽  
Average Error ◽  
Positive Pressure ◽  
Leak Test ◽  
Suction Pump ◽  
Digital Pressure ◽  
Measurement Results ◽  
Pressure Meter ◽  
Selection Of

The calibration process aims to guarantee measurement results following established standards. The purpose of this study is to design an automatic leak test for digital pressure meter in which the function of this device is to measure pressure on the Sphygmomanometer and Suction Pump or other devices that use pressure parameters for measurement. This module uses the Arduino system as control and processing of analog data into digital data to condition the output of the MPX5050GP sensor for positive pressure and MPXV4115VC6U sensor for vacuum pressure, this module uses a 4x20 LCD character display and there is a selection of mmHg and Kpa units with fluctuating resolution 0.25. Also, in this module there is an automatic leak test feature for the Sphygmomanometer, the measurement results obtained an average error of 7.3 mmHg for sphygmomanometer measurements, and for suction pumps less than 1.5 Kpa. From these results, it was concluded that this module can be used for the measurement of devices that use positive pressure and negative pressure

scholarly journals Choosing the Right Life Partner: Ecological Drivers of Lichen Symbiosis

2021 ◽  
Vol 12 ◽  
Author(s):  
Lucie Vančurová ◽  
Jiří Malíček ◽  
Jana Steinová ◽  
Pavel Škaloud
Keyword(s):  
Canary Islands ◽  
Environmental Conditions ◽  
Environmental Gradients ◽  
Fungal Species ◽  
Climatic Conditions ◽  
Algal Symbionts ◽  
Wide Range ◽  
Taxonomic Range ◽  
The Right ◽  
Selection Of

Lichens are an iconic example of symbiotic systems whose ecology is shaped by the requirements of the symbionts. Previous studies suggest that fungal (mycobionts) as well as photosynthesizing (phycobionts or cyanobionts) partners have a specific range of acceptable symbionts that can be chosen according to specific environmental conditions. This study aimed to investigate the effects of climatic conditions and mycobiont identity on phycobiont distribution within the lichen genera Stereocaulon, Cladonia, and Lepraria. The study area comprised the Canary Islands, Madeira, Sicily, and the Aeolian Islands, spanning a wide range of climatic conditions. These islands are known for their unique and diverse fauna and flora; however, lichen phycobionts have remained unstudied in most of these areas. In total, we genetically analyzed 339 lichen samples. The phycobiont pool differed significantly from that outside the studied area. Asterochloris mediterranea was identified as the most abundant phycobiont. However, its distribution was limited by climatic constraints. Other species of Asterochloris and representatives of the genera Chloroidium, Vulcanochloris, and Myrmecia were also recovered as phycobionts. The selection of symbiotic partners from the local phycobiont pool was driven by mycobiont specificity (i.e., the taxonomic range of acceptable partners) and the environmental conditions, mainly temperature. Interestingly, the dominant fungal species responded differently in their selection of algal symbionts along the environmental gradients. Cladonia rangiformis associated with its phycobiont A. mediterranea in a broader range of temperatures than Stereocaulon azoreum, which favors other Asterochloris species along most of the temperature gradient. Stereocaulon vesuvianum associated with Chloroidium spp., which also differed in their temperature optima. Finally, we described Stereocaulon canariense as a new endemic species ecologically distinct from the other Stereocaulon species on the Canary Islands.

scholarly journals PERANCANGAN MODEL PEMILIHAN SUPPLIER PRODUK CETAKAN DENGAN MENGGUNAKAN GREY BASED TOPSIS (STUDI KASUS: RUMAH SAKIT ISLAM SULTAN AGUNG SEMARANG)

2018 ◽  
Vol 13 (2) ◽  
pp. 99
Author(s):  
Darminto Pujotomo ◽  
Maulana Arif Umaindra ◽  
Purnawan Adi Wicaksono
Keyword(s):  
Decision Maker ◽  
Supplier Selection ◽  
Evaluation Criteria ◽  
Hospital Performance ◽  
Poor Quality ◽  
Work Process ◽  
Itu Model ◽  
The Right ◽  
Selection Of

Abstrak Pemilihan supplier merupakan aktivitas penting dari perusahaan dalam menentukan strategi yang tepat, khususnya pada bagian pengadaan. Rumah Sakit Islam Sultan Agung Semarang (RSIS) merupakan salah satu rumah sakit yang mempunyai masalah dalam melakukan pemilihan supplier produk cetakan. Masalah yang dihadapi yaitu keterlambatan barang, kesalahan mencetak produk, tidak sesuainya kuantitas barang pesan dan kualitas yang buruk yang dikirim oleh beberapa supplier, itu mengakibatkan penurunan kinerja rumah sakit, karena proses kerja akan terganggu. Harga merupakan kriteria utama yang digunakan RSIS dalam memilih supplier produk cetakan. Produk cetakan digunakan untuk menjalankan proses kerja setiap hari di rumah sakit. Tujuan dari penelitian ini adalah untuk merancang model pemilihan dan pengevaluasi supplier multi attribute dengan menggunakan metode Grey (Pemilihan) based TOPSIS (Evaluasi). Kriteria didapatkan berdasarkan wawancara dan studi literatur oleh peneliti dengan para decision maker bagian pengadaan. Terdapat tiga kriteria pemilihan supplier di RSIS dengan menggunakan metode Grey based TOPSIS, yaitu cost, quality dan service. Hasil penelitian mendapatkan supplier terbaik berdasarkan pemilihan para decision maker dengan, urutan supplier terbaik sampai terburuk yaitu supplier D dengan nilai kriteria yang paling baik, kemudian supplier E, A, C hingga supplier terburuk yaitu supplier B. Berdasarkan hasil tersebut dan wawancara didapatkan kemiripan dengan kondisi nyata dari supplier, oleh karena itu model yang dibuat dapat digunakan untuk memilih dan mengevaluasi supplier cetakan di RSIS. AbstractDESIGN OF SUPPLIER MOLD PRODUCTS SELECTION MODEL USING GREY BASED TOPSIS (CASE STUDY: RUMAH SAKIT SULTAN AGUNG SEMARANG). Supplier selection is an important activity of the company in determining the right strategy, especially on the part of procurement. Rumah Sakit Islam Sultan Agung Semarang (RSIS) is one of the hospitals that has problems in choosing a supplier of mold products. Problems encountered are product delays, product print errors, inappropriate quantity of message items and poor quality delivered by some suppliers, resulting in a decrease in hospital performance, as the work process will be disrupted. Price is the main criteria used by RSIS in choosing a supplier of printed products. Mold products are used to run the work process every day at the hospital. The purpose of this research is to design the model of selecting and evaluating the supplier of multi attribute by using the Grey method (Selection) based on TOPSIS (Evaluation). Criteria obtained based on interviews and literature studies by researchers with the decision maker procurement department. There are three criteria of supplier selection in RSIS by using Grey based TOPSIS method, that is cost, quality and service. The result of this research is finding the best supplier based on the selection of the decision maker with the best supplier to the worst that is supplier D with the best criterion value, then supplier E, A, C to the worst supplier that is supplier B. Based on the result and the interview got similarity with the condition real from the supplier, therefore the model can be used to select and evaluate the mold supplier in RSIS.Keywords: Supplier selection; RSIS; Grey; TOPSIS; Mold products

scholarly journals Penerapan Model Waterfall Pada Sistem Informasi Layanan Jasa Laundry Berbasis Web

2018 ◽  
Vol 4 (1) ◽  
Author(s):  
Doni Andriansyah
Keyword(s):  
Information System ◽  
System Design ◽  
Code Generation ◽  
System Development ◽  
Web Design ◽  
Work Process ◽  
Service Information ◽  
Waterfall Model ◽  
The Right ◽  
Selection Of

Abstract - System design is a solution in solving work process problems by utilizing advances in technology and information. Required selection of system development methods that are effective and efficient so that the needs of users can be immediately fulfilled. D'cuci in laundry is a company engaged in laundry services with a wide selection of services such as kiloan (dry washing and ironing, dry and folding, ironing only, and express), laundry and dryclean. In transactions recording has not been computerized thus causing slow work process in obtaining information. It takes the right innovation to solve the problem, one of which is building a website based information system. The system development method used is Waterfall with 5 stages, namely requirement analysis, system design, program code generation, implementation, support and maintenance. The results of this study will produce a website-based laundry service information system that provides ease in conducting the transaction process. Keywords: waterfall model, web design, laundry information system

METHODS OF DISTRIBUTION OF RESEARCH WORKS AMONG THE COLLECTIVES OF IMPLEMENTERS OF SCIENTIFIC PROJECTS HIGHER MILITARY EDUCATION INSTITUTIONS

2019 ◽  
Vol 2 (12) ◽  
pp. 178-187
Author(s):  
R. Bulgakov ◽  
V. Golovanʼ ◽  
L. Knaub
Keyword(s):  
Armed Forces ◽  
Scientific Work ◽  
Military Education ◽  
Resource Base ◽  
Structural Units ◽  
Wide Range ◽  
Scientific Project ◽  
Higher Educational ◽  
The Right ◽  
Selection Of

The article deals with increasing the efficiency of scientific project management in higher military educational establishments by introducing the method of distribution of research works among the teams of performers of scientific projects of higher military educational establishments, analyzes the load of scientific and pedagogical workers of typical structural units of higher educational establishments of higher educational establishments. Actions of the functional leader in the selection of the team of executors of the scientific project. Specificity of scientific tasks in the military field is the need to overcome the uncertainties caused by the unpredictability of the enemy during combat. The complexity and multidimensionality of the problem of planning and managing the scientific and technical activities in the security and defense sector necessitate the improvement of existing planning and management mechanisms in the Armed Forces of Ukraine. Management activities of functional leaders is one of the important factors for the success and quality of scientific tasks. In the teaching and research processes of higher military education there is a wide range of management entities. The content and scope of managerial functions of heads of departments, faculties and departments are defined in the relevant charters, guidelines and instructions. However, it is very difficult to identify the quantitative weight of each institution of management of the scientific-pedagogical system of higher education institutions and its structural units. The order of performing management functions during certain periods of activity is worked out by each entity, mainly independently, on the basis of personal experience, the choice of forms, methods and means of influencing the management object is, for the most part, a creative process. One of the important aspects of the implementation of a scientific project that depends on the end result is the selection of the "right" team of project executors and the project resource, namely: specialists in the field of research, motivated by the result, able to achieve it by their competence, not overloaded with other work , plus - comprehensive security of the project. In order to increase the effectiveness of management activities, to apply the management of the institution (the chief and his deputy for scientific work) by the apparatus, to qualitatively evaluate and make the right management decisions at the stage of appointment of the project manager and the team of executors of the scientific project, to determine the resource base and limitations in this particular scientific project, this technique is proposed. Management of scientific projects in all phases of their implementation - from order to implementation, is a priority direction of increasing the efficiency of the system of scientific and scientific-technical activity of the Armed Forces of Ukraine. The implementation of the algorithm of selection of the team of executors of the scientific project is an effective mechanism for optimizing the decision-making process by functional managers in the early stages of scientific projects.

scholarly journals WILL CASHLESS PAYMENT BECOME CONSUMER'S TRANSACTION HABIT IN THE "NEW NORMAL" ERA?

TRIKONOMIKA ◽  
2021 ◽  
Keyword(s):  
Self Efficacy ◽  
Perceived Risk ◽  
Continuance Intention ◽  
New Normal ◽  
Wide Range ◽  
Perceived Security ◽  
The Right ◽  
Selection Of

The purpose of this study was to find out whether or not new habit, cashless transaction, would still be used after the Covid-19 pandemic or in the new normal era, considering that this was a situational or temporary factor. The population of this research was individual consumers who were currently more likely to have higher intensity in cashless transactions than they did before the pandemic. This research was a study conducted during the Covid-19 pandemic in Indonesian society by examining the effect of perceived security, perceived risk, facilitating condition, Self-Efficacy of trust in online payments, and the use of cashless on Usage Continuance intention. The results of this study with 594 tested samples were two insignificant correlations. They were perceived risk toward trust in online payments and self-efficacy on usage continuance intention. These findings could support a wide range of stakeholders - both first movers/ pioneers and newcomers to the e-money segment, as the information about promotion and selection of the right market for their products.

scholarly journals THE TECHNIQUE OF FORMATION OF SYSTEM OF FORESTRY MACHINES

2017 ◽  
Vol 7 (1) ◽  
pp. 111-117 ◽  
Author(s):  
Мамматов ◽  
Vladimir Mammatov ◽  
Мохирев ◽  
Aleksandr Mokhirev
Keyword(s):  
Expert Knowledge ◽  
Stock Selection ◽  
Screening Criteria ◽  
Natural Production ◽  
Wide Range ◽  
Major Operation ◽  
Market Engineering ◽  
The Right ◽  
Production Conditions ◽  
Selection Of

A variety of natural-production conditions, which is necessary to conduct logging activities largely complicates the choice of forest machines for each individual company in the industry having logging sites in its composition. Depending on many natural and production conditions such as: slope, bearing capacity of soils, ambient temperature, maximum investments, etc., and the wide range of forestry equipment on the market, engineering divisions of the company solving a problem about the purchase of new or replacement of lost its performance machines are more and more difficult to make the right choice. This work presents a methodology for forming the system of forest machines with the natural and production conditions in a convenient form, not requiring special expert knowledge from the field of mathematical modeling or other areas of science. According to the methodology the first step is selection of basic machine and performing the first major operation in felling trees, then switch to the auxiliary machines which are linked to the underlying performance, to reduce the number of in-process stock. Selection of basic and auxiliary machines is provided that candidates and excludes important indicators. If in the process of selecting the logging machine does not meet the screening criteria for excluding indicators then it does not participate in the selection. Significant index can be neglected in case of discrepancy of candidates to stated requirements. The performance of the model was tested on the example of harvesting sites of the enterprises of the Krasnoyarsk region in spring 2016. In the course of the experiment the system of forest machines, meeting the required selection criteria, was obtained.

scholarly journals Selected Problems of Power MOSFETs Thermal Parameters Measurements

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8353
Author(s):  
Krzysztof Górecki ◽  
Krzysztof Posobkiewicz
Keyword(s):  
Measurement Error ◽  
Measurement Methods ◽  
Thermal Parameters ◽  
Contact Method ◽  
Electrical Method ◽  
Power Mosfets ◽  
Measurement Results ◽  
Additional Influence ◽  
Transient Thermal ◽  
Selection Of

In the paper, selected problems that are related to the measurements of thermal parameters of power MOSFETs that are placed on a common heat sink are analysed. The application of the indirect electrical method, the contact method, and the optical method in measuring self and mutual transient thermal impedances of these transistors is presented. The circuits that are required to perform measurements are presented and described. The errors of measurements are assessed for each of the considered methods. In the case of the indirect electrical method, an additional influence of the selection of a thermo-sensitive parameter and the function approximating thermometric characteristics on the measurement error are taken into consideration. The measurement results of the thermal parameters of the investigated transistors that were obtained using the considered measurement methods in various supply conditions are presented and discussed.

Sign in / Sign up

Export Citation Format

Share Document