scholarly journals A Research on Producer Reasons for Participation into Agricultural Fairs

2021 ◽  
Vol 9 (12) ◽  
pp. 2312-2318
Author(s):  
Özdal Köksal ◽  
Duygu Aktürk ◽  
Sema Gün
Keyword(s):  
New Technologies ◽  
New Products ◽  
Agricultural Technologies ◽  
Agricultural Society ◽  
Chaid Analysis ◽  
New Information ◽  
Analysis Technique ◽  
Agricultural Fairs ◽  
Efficient Information ◽  
Made In

Ever-developing agricultural technologies and progress in communication science increase competition and globalization in converge countries. Agricultural fairs offer ambient to bring producers and input-suppliers of agriculture together at certain places and times. They offer direct and efficient information about new technologies to producers. German Agricultural Society and Leader Farmer Association have jointly organized outdoor fairs in Turkey since 2010. Agriculture Days Fair is one of the most important events among these jointly organized fairs. This study was conducted to determine the reasons for producers’ participation in these fairs held in 2015 and 2017 and to determine the effects of socio-economic characteristics of the producers on their reasons for participation in these fairs. A total of 589 questionnaires were made in this study (250 in May 2015 fair and 339 in August 2017 fair). The same questionnaire forms were used in both years. CHAID analysis technique was employed in analyzing data gathered from the producers. It was observed that producers generally participated in agricultural fairs just for the excursion or spent time with their families at weekends. However, it was also determined that the producers were informed about the agricultural fairs by producer organizations and Leader Farmer Association participated in the fairs to promote a new products or to give information about new technologies and inputs. It can be suggested that beyond informing producers about the fairs, Leader Farmer Association formed within the scope of Leader Farmer Project initiated with the support of German Agricultural Society (DLG) should convey information about how important the fairs are in the acquaintance with introducing new information and technologies.

scholarly journals The Kinds of Translation Error Made by the Students in Writing Abstract of the Theses and Dissertations

2020 ◽  
Vol 6 (2) ◽  
pp. 58-66
Author(s):  
Munawir Munawir
Keyword(s):  
Error Analysis ◽  
Quantitative Method ◽  
Translation Error ◽  
New Information ◽  
Analysis Technique ◽  
English Students ◽  
Theses And Dissertations ◽  
Made In

This research aims to find the kinds of translation error made in writing abstract of theses and dissertations. This research used descriptive quantitative method to analyze and expose the errors of abstracts of theses and dissertations. The data of this research was the abstracts of theses and dissertations of universities in Makassar. It took 61 abstracts of theses and dissertations from different universities. The abstracts is analyzed by using error analysis technique. The result of this research concluded that the abstracts are found various errors. Errors in the kinds of translation were Omission – Deviation – Modification – Addition - and the least is Inversion. The result of this research provides a new information about translation to the students especially to non-English students, and motivate them to translate the abstract well.

NANOSCIENCE ADVANCES IN THE UK IN SUPPORT OF NANOTECHNOLOGY

2002 ◽  
Vol 01 (02) ◽  
pp. 123-138 ◽  
Author(s):  
RICHARD K. LEACH ◽  
LIAM BLUNT ◽  
DEREK G. CHETWYND ◽  
ANDREW YACOOT
Keyword(s):  
Quality Assurance ◽  
New Technologies ◽  
New Products ◽  
Production Engineering ◽  
Top Down ◽  
Product Reliability ◽  
The Uk ◽  
Metrology Infrastructure ◽  
Made In

There is little doubt that nanotechnology will revolutionise peoples' approaches to areas as diverse as the structure of materials, production engineering, biotechnology and medicine. Currently there are a number of companies that are exploiting micro- and nanotechnology, mainly using a top–down approach, i.e., through miniaturisation. As new products are created from the new technologies there must be methods, developing in parallel, for ensuring product reliability and quality assurance. It is asserted that this can only be achieved through the development of a metrology infrastructure. This paper will describe some of the advances that have been made in the UK in developing such an infrastructure.

Principles of Low-Vacuum SEM

1992 ◽  
Vol 50 (2) ◽  
pp. 1304-1305
Author(s):  
Klaus-Ruediger Peters
Keyword(s):  
New Technologies ◽  
High Vacuum ◽  
Optical Microscope ◽  
Specimen Surface ◽  
Electrical Field ◽  
Gaseous Environment ◽  
New Information ◽  
Gas Molecules ◽  
New Interactions ◽  
Gas Pressures

Only recently it became possible to expand scanning electron microscopy to low vacuum and atmospheric pressure through the introduction of several new technologies. In principle, only the specimen is provided with a controlled gaseous environment while the optical microscope column is kept at high vacuum. In the specimen chamber, the gas can generate new interactions with i) the probe electrons, ii) the specimen surface, and iii) the specimen-specific signal electrons. The results of these interactions yield new information about specimen surfaces not accessible to conventional high vacuum SEM. Several microscope types are available differing from each other by the maximum available gas pressure and the types of signals which can be used for investigation of specimen properties.Electrical non-conductors can be easily imaged despite charge accumulations at and beneath their surface. At high gas pressures between 10-2 and 2 torr, gas molecules are ionized in the electrical field between the specimen surface and the surrounding microscope parts through signal electrons and, to a certain extent, probe electrons. The gas provides a stable ion flux for a surface charge equalization if sufficient gas ions are provided.

Auto Markets in the World and Strategy of Japan’s Companies

2019 ◽  
Vol 10 (10) ◽  
pp. 1003-1008
Author(s):  
Hiroyuki Matsuoka ◽  
Keyword(s):  
Saudi Arabia ◽  
Electric Vehicle ◽  
New Technologies ◽  
Auto Industry ◽  
Domestic Market ◽  
Automatic Driving ◽  
The World ◽  
Almost All ◽  
Made In

In the world auto market, top three companies are VW(Volkswagen), Runault-Nissan-Mistubishi, and Toyota. About some selected countries and areas, China, England, Italy, Australia, Germany, Turkey, Russia, Sweden, USA, Brazil, UAE, Japan, Vietnam and Thailand are more competitive. However, the situation is different. Seeing monopolistic market countries and areas, Saudi Arabia, Taiwan, Korea, Malaysia, France, India, and Pakistan, in particular, the influence of Japan to Taiwan, India, and Pakistan is very big. But in Korea and France, their own companies’ brands occupy the market. In Japan domestic market, the overall situation is competitive. Almost all vehicles made in Japan are Japanese brand. From now on, we have to note the development of electric vehicle (EV) and other new technologies such as automatic driving and connected car. That is because they will give a great impact on the auto industry and market of Japan. Now Japan’s auto industry is going to be consolidated into three groups, Honda, Toyota group, and Renault-Nissan-Mitsubishi group for seeking the scale merit of economy. Therefore, I will pay attention to the worldwide development of EV and other new technologies and the reorganization of auto companies groups.

On Introducing New Information Technologies in Jurisprudence

2019 ◽  
pp. 82-86
Author(s):  
Aleksandr Mitin
Keyword(s):  
Information Technologies ◽  
New Technologies ◽  
Professional Competence ◽  
Comprehensive Analysis ◽  
Legal Services ◽  
Degree Programs ◽  
Creative Work ◽  
Electronic Trading ◽  
New Information ◽  
Legal Space

The article discusses the possibilities of automation of legal activities. Special attention is paid to the new branch of the business LegalTech, which allows providing legal services using information technology. Some projects in this area are briefly described: FreshDoc document designer, VideoContract app, and electronic trading platforms such as Legal Space and Pravoved.Ru. Although the legal community is not quite ready to work in such conditions, higher education institutions are already reforming their curricula, developing disciplines that allow gaining professional competence in introducing technologies that automate legal work, and so on. The author, in turn, offers using chat bots in legal clinics, gives examples of new disciplines for master’s degree programs, considers the idea of passing final examinations outside universities in certification centers, etc. It is emphasized that in jurisprudence there are a lot of typical situations in which typical decisions need to be made, and here artificial intelligence will be a good helper, and scientists will have more time to undertake a comprehensive analysis of law. Thus, even with the advent of new technologies, the creative work of lawyers will always be in demand.

scholarly journals Social distancing in public transport: mobilising new technologies for demand management under the Covid-19 crisis

2021 ◽  
Author(s):  
Daniel Hörcher ◽  
Ramandeep Singh ◽  
Daniel J. Graham
Keyword(s):  
Public Transport ◽  
Perceived Risk ◽  
Urban Areas ◽  
New Technologies ◽  
Demand Management ◽  
Single Point ◽  
Relevant Literature ◽  
Social Distancing ◽  
New Information ◽  
Occupancy Rates

AbstractDense urban areas are especially hardly hit by the Covid-19 crisis due to the limited availability of public transport, one of the most efficient means of mass mobility. In light of the Covid-19 pandemic, public transport operators are experiencing steep declines in demand and fare revenues due to the perceived risk of infection within vehicles and other facilities. The purpose of this paper is to explore the possibilities of implementing social distancing in public transport in line with epidemiological advice. Social distancing requires effective demand management to keep vehicle occupancy rates under a predefined threshold, both spatially and temporally. We review the literature of five demand management methods enabled by new information and ticketing technologies: (i) inflow control with queueing, (ii) time and space dependent pricing, (iii) capacity reservation with advance booking, (iv) slot auctioning, and (v) tradeable travel permit schemes. Thus the paper collects the relevant literature into a single point of reference, and provides interpretation from the viewpoint of practical applicability during and after the pandemic.

THE USE OF DIGITAL TECHNOLOGIES IN TEACHING A FOREIGN LANGUAGE

2020 ◽  
Vol XIII (XIII) ◽  
pp. 72-77
Author(s):  
L.D. KRIVYKH ◽  
◽  
O.B. BAGRINTSEVA ◽  
Keyword(s):  
Foreign Language ◽  
Information And Communication Technologies ◽  
New Technologies ◽  
Communication Technologies ◽  
Language Teachers ◽  
Foreign Languages ◽  
Listening Skills ◽  
Foreign Language Teachers ◽  
New Information ◽  
Information And Communication

The article deals with the application of new technologies in teaching foreign languages. Substantiates the importance of the development of other forms and methods of teaching English to students of information technology disciplines. As well as drawing attention to the use of new information and communication technologies of the Internet. The article includes examples of the use of podcasts in the development of listening skills. The article is written for foreign language teachers, all interested in the methodology of teaching foreign languages, based on new technologies.

Fueling Spin-offs: Case Studies of University-based Technology Start-up Funding

2021 ◽  
Vol 22 (1) ◽  
pp. 29-40
Author(s):  
Julie Lenzer ◽  
Piotr Kulczakowicz
Keyword(s):  
Product Development ◽  
New Technologies ◽  
Early Stage ◽  
New Products ◽  
Academic Research ◽  
Real Life ◽  
Private Investment ◽  
Building Relationships ◽  
Start Up ◽  
Single Path

The new technologies born from academic research can be very promising, yet they are often very early stage. University spin-off companies are uniquely positioned to tackle the risks associated with new technologies emerging from academia by developing proofs of concept, functioning prototypes, and new products. While these enterprises start from a solid research and development foundation, they face their own unique set of challenges—they are strongly anchored in the scientific and technological expertise that is typically backed by intellectual property but often lack the business experience needed to develop and market products demanded by customers. University spin-offs have access to substantial non-dilutive funding that can be utilized for advancing product development. While the relentless pursuit of these funds builds a company's credibility and improves its position for negotiating future private investment, university spin-offs would greatly benefit from an early focus on complementing their technology teams with their business teams. These new enterprises should consider pursuing private investment in parallel to utilizing sources of non-dilutive funding. Timing of private investment is extremely important to maximize the value of the opportunity, and, therefore, building relationships with investors early on and getting ready for executing an investment round can greatly increase odds for success. While there is no single path to formulate, pursue, and adapt successful financing strategies, lessons can be learned from real-life cases of university spin-offs that continue their journeys towards ultimate success.

Prospects for the development of normmaking using information technologies

2020 ◽  
Vol 70 (2) ◽  
pp. 115-119
Author(s):  
A.B. Sadvakasov ◽  
Keyword(s):  
Public Administration ◽  
State Policy ◽  
Information Technologies ◽  
New Technologies ◽  
Economic Relations ◽  
Legal Norms ◽  
New Information ◽  
Rule Making ◽  
Consistent Approach

A consistent approach to improving the quality of draft of normative legal acts contributes to the development of socio-economic relations in the country, reducing bureaucratic procedures and generally improves public administration. The quality of rule-making and its effectiveness largely determine the implementtion of a particular state policy task. Kazakhstan has created all conditions for the development of legislation and its improvement. Moreover, measures are being taken to introduce new information technologies to adjust existing legal norms. The article describes the existing system of state rulemaking, as well as the prospects for using new technologies.

FEATURES OF THE FORMATION AND DISPLAY OF TEMPORARY FEATURES IN THE IMPRESSIONS OF SEALS AND STAMPS CLICHÉS

2020 ◽  
Vol 21 (1) ◽  
pp. 318-329
Author(s):  
N. Zubova ◽  
H. Loshmanova ◽  
V. Somov
Keyword(s):  
New Technologies ◽  
Forensic Identification ◽  
Time Period ◽  
Temporal Features ◽  
Technology Changes ◽  
Characteristic Features ◽  
Materials Used ◽  
Seal Impressions ◽  
Legal Grounds ◽  
Made In

Seals and stamps, as well as their impressions, have been the objects of forensic identification for many decades, and although there are legal grounds for refusing to use seals by economic entities at present, documents are still certified with seal impressions. Recently, a great number of documents have been received for examination to address the issues as to the time period for document production. The forensic task on establishing the time period for document production is relevant. Only in the 80-s of the last century research regarding the possibilities of determining the time period for document production by impressions made by seals (stamps) clichés, produced with the help of vulcanizing rubber using movable types or typewriter composition was initiated. Over the past forty years, cliché manufacturing processes and the materials used in this process have significantly changed. At present, clichés produced with the use of new technologies are widespread, namely: laser engraving of rubber made by using photopolymer technology or flash technology. Changes in the technology of making clichés, production of new materials have led to the emergence of features that are formed in the cliché while its using. These features are displayed in the impressions of seals and stamps clichés. The article outlines the characteristic features of seals (stamps )clichés, considers the conditions for the occurrence of features in the process of their use, shows the evolution of their change, outlines the time periods for the existence of features, defines the criteria for attributing features to identically significant temporal features of the cliché. The mentioned temporal features appearing in the cliché of seals and stamps in general (taking into account handles) and in impressions over a certain period of time, allows to determine the time period of applying the impression on a document. In this case, free samples of impressions that have been made over the time period of examination and meet certain requirements should be provided for comparative analysis. For the categorical conclusion that the impression of a seal (stamp) was made in a specific period of time, it is needed to establish a set of persistent individual features that appeared in the studied impression and its copy over a certain period of time.

Sign in / Sign up

Export Citation Format

Share Document