scholarly journals An Investigation on Improvements to Ultrasound Reactor Configuration for Extraction of Phytochemicals in Industrial Scale

2020 ◽  
Vol 3 (2) ◽  
pp. 91
Author(s):  
Tarık Uçar ◽  
Kubilay Aziz
Keyword(s):  
Energy Demand ◽  
Extraction Process ◽  
Industrial Applications ◽  
Ultrasound Assisted Extraction ◽  
Optimum Frequency ◽  
Reactor Configuration ◽  
Assisted Extraction ◽  
Ultrasound Technology ◽  
The Waves ◽  
Plant Sources

Industrial attentiveness and demand for natural bioactive compounds are rising continuously, regarding their growing commercial values in nutrition, pharmaceuticals, cosmetics and many other industries. The progress in ultrasound technology has spread the use of ultrasonication on a broad field of application areas, including extraction of bio-materials from plant sources. Ultrasound-assisted extraction is a powerful alternative to conventional techniques, in terms of extracting bio-compounds from variable kinds of matrices, higher efficiency, reduced extraction time, toxic-free operation, lower energy demand, lesser water consumption and better extract quality. Existing research pointed out that the reactor configuration is vital for maximizing the efficacy of extraction process, however basic reactor configurations that were mainly used in the literature may not be feasibly adapted to full-scale industrial applications. In this study, an investigation on possible improvements and modifications to existing reactor designs are discussed, such as detecting the optimum frequency range of ultrasound transmission depending on the material rheology and composition, possible modifications in beam-forming by means of frequency modulation and finally transmitting the waves in combination of different frequencies.

scholarly journals Ultrasonic-Assisted Extraction and Natural Deep Eutectic Solvents Combination: A Green Strategy to Improve the Recovery of Phenolic Compounds from Lavandula pedunculata subsp. lusitanica (Chaytor) Franco

Antioxidants ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 582
Author(s):  
Inês Mansinhos ◽  
Sandra Gonçalves ◽  
Raquel Rodríguez-Solana ◽  
José Luis Ordóñez-Díaz ◽  
José Manuel Moreno-Rojas ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Phenolic Compounds ◽  
Deep Eutectic Solvents ◽  
Industrial Applications ◽  
Total Phenolic ◽  
Ultrasound Assisted Extraction ◽  
Phenolic Contents ◽  
Assisted Extraction ◽  
Natural Deep Eutectic Solvents ◽  
Ultrasonic Assisted

The present study aimed at evaluating the effectiveness of different natural deep eutectic solvents (NADES) on the extraction of phenolic compounds from Lavandula pedunculata subsp. lusitanica (Chaytor) Franco, on the antioxidant activity, and acetylcholinesterase (AChE), butyrylcholinesterase (BChE) and tyrosinase (Tyr) inhibitory capacities. Ten different NADES were used in this research and compared with conventional solvents. Ultrasound-assisted extraction (UAE) for 60 min proved to be the best extraction condition, and proline:lactic acid (1:1) and choline chloride:urea (1:2) extracts showed the highest total phenolic contents (56.00 ± 0.77 mgGAE/gdw) and antioxidant activity [64.35 ± 1.74 mgTE/gdw and 72.13 ± 0.97 mgTE/gdw in 2.2-diphenyl-1-picrylhydrazyl (DPPH) and 2.2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) methods, respectively]. These extracts also exhibited enzymes inhibitory capacity particularly against Tyr and AChE. Even so, organic acid-based NADES showed to be the best extractants producing extracts with considerable ability to inhibit enzymes. Twenty-four phenolic compounds were identified by HPLC-HRMS, being rosmarinic acid, ferulic acid and salvianolic acid B the major compounds. The results confirmed that the combination of UAE and NADES provide an excellent alternative to organic solvents for sustainable and green extraction, and have huge potential for use in industrial applications involving the extraction of bioactive compounds from plants.

Research on Detecting Tris-(2,3-dibromopropyl)-Phosphate in Textiles with the HPLC/DAD Method

2012 ◽  
Vol 441 ◽  
pp. 640-644
Author(s):  
Ke Jie Fu ◽  
Li Sheng Yang ◽  
Chang Sheng Feng ◽  
Liang Chen
Keyword(s):  
Limit Of Detection ◽  
Extraction Process ◽  
Ultrasound Assisted Extraction ◽  
Routine Testing ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Pre Treatment ◽  
Finishing Agent ◽  
Detecting Method ◽  
Precision Test

A detecting method for toxic flame retardant finishing agent tris-(2,3-dibromopropyl) -phosphate (TRIS for short) in textiles was studied. In the method, an acetonitrile ultrasound-assisted extraction process was included in sample pre-treatment, and HPLC/DAD was used in the separation and identification of extractives. After that, the conditions of pre-treatment and chromatograph were optimized. The results showed that the limit of detection (LOD) by this method (S/N10) is 1.0 mg/kg, its recovery ranged from 78.1% to 98.4%, and RSD of the precision test is 3.2%, of which all met the requirements for routine testing.

scholarly journals Volarization of valuable compound from watermelon by-product using ultrasound-assisted extraction

Food Research ◽  
2020 ◽  
Vol 4 (6) ◽  
pp. 1995-2002
Author(s):  
W.Y.C. Lim ◽  
N.L. Yusof ◽  
Ismail-Fitry M.R. ◽  
N. Suleiman
Keyword(s):  
Citric Acid ◽  
Acid Content ◽  
Galacturonic Acid ◽  
Value Added ◽  
Extraction Process ◽  
Ultrasound Assisted Extraction ◽  
Pectin Content ◽  
Watermelon Rind ◽  
Assisted Extraction ◽  
Confectionery Products

The aim of this study was to develop an efficient, reliable, and sustainable technology for the recovery of value-added compounds from by-product, in this case, is watermelon rinds. The properties of the watermelon rinds obtained from innovative ultrasoundassisted extraction (UAE) were evaluated. In regard to this, the pectin content, degree of esterification, and galacturonic acid content of the watermelon rind extracts were determined in order to verify the efficiency of the UAE. Initially, the UAE were conducted using two types of acid: citric and hydrochloric. The highest pectin content was obtained using citric acid. Additional UAE was then performed with citric acid at 50, 60, or 70°C for 10, 20, or 30 mins. Both UAE temperature and time significantly influenced the pectin extracts and galacturonic acid. The best findings for a high galacturonic acid content (47.41%) when the watermelon rinds were extracts at 70°C for 20 mins. According to the findings, the extraction process lasted 10 or 20 mins at all temperatures was mainly high-methoxyl pectin, which can form gels under acidic conditions. This suggests that pectins derived from watermelon rinds using UAE may be especially useful as an additive in some confectionery products.

Protein Extraction from Spirulina platensis by Using Ultrasound Assisted Extraction: Effect of Solvent Types and Extraction Time

2021 ◽  
Vol 872 ◽  
pp. 33-37
Author(s):  
Kong Sela ◽  
Wiratni Budhijanto ◽  
Arief Budiman
Keyword(s):  
Spirulina Platensis ◽  
Protein Extraction ◽  
Solvent Mixture ◽  
Industrial Applications ◽  
Extraction Time ◽  
Protein Recovery ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Solvent Volume

Protein is a substantial nutrition that essentially required by human. Spirulina platensis (Spp), well known as protein source could be a significant source to be used for many industrial applications. This study was investigated the effectiveness of ultrasound assisted extraction (UAE) method for protein extraction from Spp at various composition of solvent mixture and extraction time. Ethanol and mixture of methanol-ethanol were used as solvent. Extraction was conducted by varying ratios of solvent to biomass at 10:1, 12.5:1, and 15:1 (v/w), and extraction time (20, 35, and 50 min). Optimum protein recovery from dry Spp was 42.55 ± 0.43% obtained by using 20 ml of the mixture of methanol and ethanol at 50 min of extraction time. This study also conducted that mixture of methanol and ethanol was a better solvent on improving the ultrasound assisted extraction, as indicated by high protein recovery with less amount of solvent volume used.

scholarly journals Antioxidant Capacity and Antigenotoxic Effect of Hibiscus sabdariffa L. Extracts Obtained with Ultrasound-Assisted Extraction Process

2020 ◽  
Vol 10 (2) ◽  
pp. 560
Author(s):  
Gregorio Iván Peredo Pozos ◽  
Mario Alberto Ruiz-López ◽  
Juan Francisco Zamora Nátera ◽  
Carlos Álvarez Moya ◽  
Lucia Barrientos Ramírez ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Human Lymphocytes ◽  
Dry Weight ◽  
Extraction Process ◽  
Hibiscus Sabdariffa ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Antigenotoxic Effect

Hibiscus sabdariffa (Roselle) is in high demand worldwide due to its beneficial health properties owing to the polyphenols content, mainly in the flower calyx. The objective of this study was to find the best conditions (time and liquid: solid ratio) to extract polyphenols from Roselle using Ultrasound-Assisted Extraction (UAE) (40 kHz, 180 W), with ethanol how solvent; as well as determine the yield of phenols, anthocyanin, flavonoids, tannins, antioxidant activity (DPPH) and antigenotoxic effect (comet assay). A traditional solid-liquid extraction was applied as a reference. Extraction times of 40 and 60 min resulted in the highest polyphenols (13.019 mg GAE/g dry weight (dw)), flavonoids (4.981 CE/g dw), anthocyanins (1.855 mg Cya3GE/g dw), and tannins (0.745 CE/g dw) recoveries and an antioxidant activity (DPPH) of 74.58%. Extracts from white calyces contained similar amounts of phenols and flavonoids, but very little condensed tannins (0.049 CE/g dw) and practically no anthocyanins. Extracts from red and white calyces, showed antigenotoxic activity and repaired capacity of damage caused by mutagens in human lymphocytes.

scholarly journals Technology and Process Design for Phenols Recovery from Industrial Chicory (Chicorium intybus) Leftovers

Molecules ◽  
2019 ◽  
Vol 24 (15) ◽  
pp. 2681 ◽  
Author(s):  
Camilla Maria Cova ◽  
Luisa Boffa ◽  
Marco Pistocchi ◽  
Silver Giorgini ◽  
Rafael Luque ◽  
...  
Keyword(s):  
Extraction Process ◽  
Ethanol Solution ◽  
Ultrasound Assisted Extraction ◽  
Mineral Salts ◽  
Primary And Secondary Metabolites ◽  
Assisted Extraction ◽  
Honestly Significant Difference ◽  
Significant Difference ◽  
Tukey Honestly Significant Difference ◽  
Post Hoc

Vegetal leftovers from the agro–food industry represent a huge source of primary and secondary metabolites, vitamin, mineral salts and soluble as well as insoluble fibers. Economic reports on the growth in the polyphenol market have driven us to focus our investigation on chicory (Chicorium intybus L.), which is one of the most popular horticultural plants in the world and a rich source of phenolic compounds. Ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE) and their simultaneous combination, using either ethanol/water or water alone (also sub-critical), have been investigated with the aim of designing a green and efficient extraction process. Higher total-polyphenol yields as well as dramatic reductions in extraction times and solvent consumption have been obtained under these conditions. ANOVA test for analyses of variance followed by the Tukey honestly significant difference (HSD) post-hoc test of multiple comparisons was used in the statistical analysis. MAE experiments performed with sub-critical water, and MW/US experiments with an ethanol solution have shown polyphenol recovery values of up to ~3 g of gallic acid equivalents (GAE) per kg of fresh material in only 15 min, while conventional extraction required 240 min to obtain the same result.

scholarly journals Bioactive Compounds in Bael Fruit Pulp Waste: Ultrasound-Assisted Extraction, Characterization, Modeling, and Optimization Approaches

2020 ◽  
Vol 11 (2) ◽  
pp. 9318-9334
Keyword(s):  
Bioactive Compounds ◽  
Food Additives ◽  
Extraction Process ◽  
Coefficient Of Determination ◽  
Fruit Pulp ◽  
Ultrasound Assisted Extraction ◽  
Modeling And Optimization ◽  
Assisted Extraction ◽  
Pharmaceutical Industries ◽  
Ultrasound Assisted

Bael fruit is an abundant source of bioactive compounds that have importance in the food and pharmaceutical industries. The process of extraction of the bael fruit juice produced a higher percentage of bael fruit pulp waste (BFPW) (37.33 %), which was recycled for the extraction of bioactive compounds. Thus the bioactive compounds like polyphenols, flavonoids, and carotenoids were extracted from BFPW by using the ultrasound-assisted extraction (UAE) technique. The modeling and optimization of the extraction process were carried out by using the experimental design of response surface methodology (RSM). The ethanol concentration of 51.22 %, ultrasound amplitude of 51.45 %, and ultrasound treatment time of 6.11 minutes were obtained to be an RSM optimized values of extraction process variables. The lower values of root mean squared error (RMSE) and mean absolute error (MAE) and higher values of coefficient of determination (R2) indicated admissibility and acceptability of RSM. This extraction process of bioactive compounds has the potential to implement it on an industrial scale for the formulation of food additives and medicines.

scholarly journals Optimization of a Green Ultrasound-Assisted Extraction of Different Polyphenols from Pistacia lentiscus L. Leaves Using a Response Surface Methodology

Plants ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1482
Author(s):  
Cassandra Detti ◽  
Luana Beatriz dos Santos Nascimento ◽  
Cecilia Brunetti ◽  
Francesco Ferrini ◽  
Antonella Gori
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Industrial Applications ◽  
Pistacia Lentiscus ◽  
Ultrasound Assisted Extraction ◽  
Box Behnken Design ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Time Decrease

Pistacia lentiscus leaves are used in several applications, thanks to their polyphenolic abundance. Thiswork aimed to characterize the polyphenols and to optimize the extraction conditions to shorten the time, decrease the consumption of solvent, and to maximize the yield of different classes of phenolics, which have diverse industrial applications. The variables were optimized by applying a Box–Behnken design. Galloyl and myricetin derivatives were the most abundant compounds, and two new tetragalloyl derivatives were identified by LC-MS/MS. According to the models, the maximum yields of polyphenols (51.3 ± 1.8 mg g−1 DW) and tannins (40.2 ± 1.4 mg g−1 DW) were obtained using 0.12 L g−1 of 40% ethanol at 50 °C. The highest content of flavonoids (10.2 ± 0.8 mg g−1 DW) was obtained using 0.13 L g−1 of 50% ethanol at 50 °C, while 0.1 L g−1 of 30% ethanol at 30 °C resulted in higher amounts of myricitrin (2.6 ± 0.19 mg g−1 DW). Our optimized extraction decreased the ethanolic fraction by 25% and halved the time compared to other methods. These conditions can be applied differently to obtain P. lentiscus extracts richer in tannins or flavonoids, which might be employed for various purposes.

Sign in / Sign up

Export Citation Format

Share Document