Penerapan Metode Localization Tampering dan Hashing untuk Deteksi Rekayasa Video Digital

2021 ◽  
Vol 5 (2) ◽  
pp. 400-406
Author(s):  
Alfiansyah Imanda Putra Alfian ◽  
Rusydi Umar ◽  
Abdul Fadlil
Keyword(s):  
Digital Video ◽  
Video Frame ◽  
Original Video ◽  
Video Forensics ◽  
Information Communication ◽  
Video Technology ◽  
A Value ◽  
Initial Stage ◽  
Digital Crime ◽  
The Difference

The development of digital video technology which is increasingly advanced makes digital video engineering crimes prone to occur. The change in digital video has changed information communication, and it is easy to use in digital crime. One way to solve this digital crime case is to use the NIST (National Institute of Standards and Technology) method for video forensics. The initial stage is carried out by collecting data and carrying out the process of extracting the collected results. A local hash and noise algorithm can then be used to analyze the resulting results, which will detect any digital video interference or manipulation at each video frame, and perform hash analysis to detect the authenticity of the video. In digital video engineering, histogram analysis can be performed by calculating the histogram value metric, which is used to compare the histogram values ​​of the original video and video noise and make graphical comparisons. The results of the difference in frame analysis show that the results of the video show that the 2nd to 7th frames experience an attack while the histogram calculation of the original video centroid value and video tampering results in different values ​​in the third frame, namely with a value of 124.318 and the 7th frame of the video experiencing a difference in the value of 105,966 videos. tampering and 107,456 in the original video. Hash analysis on video tampering results in an invalid SHA-1 hash, this can prove that the video has been manipulated.

scholarly journals The Water Footprint of Primary and Secondary Processing of Beef from Different Cattle Breeds: A Value Fraction Allocation Model

2021 ◽  
Vol 13 (12) ◽  
pp. 6914
Author(s):  
Frikkie Alberts Maré ◽  
Henry Jordaan
Keyword(s):  
Water Footprint ◽  
Negative Relationship ◽  
High Water ◽  
Allocation Model ◽  
Cattle Breeds ◽  
A Value ◽  
Average Production ◽  
High Water Intake ◽  
The Difference ◽  
By Products

The high water intake and wastewater discharge of slaughterhouses have been a concern for many years. One neglected factor in previous research is allocating the water footprint (WF) to beef production’s different products and by-products. The objective of this article was to estimate the WF of different cattle breeds at a slaughterhouse and cutting plant and allocate it according to the different cuts (products) and by-products of beef based on the value fraction of each. The results indicated a negative relationship between the carcass weight and the processing WF when the different breeds were compared. Regarding a specific cut of beef, a kilogram of rib eye from the heaviest breed had a processing WF of 614.57 L/kg, compared to the 919.91 L/kg for the rib eye of the lightest breed. A comparison of the different cuts indicated that high-value cuts had higher WFs than low-value cuts. The difference between a kilogram of rib eye and flank was 426.26 L/kg for the heaviest breed and 637.86 L/kg for the lightest breed. An option to reduce the processing WF of beef is to lessen the WF by slaughtering heavier animals. This will require no extra investment from the slaughterhouse. At the same time, the returns should increase as the average production inputs per kilogram of output (carcass) should reduce, as the slaughterhouse will process more kilograms.

Berechnung kinetischer Isotopeneffekte für die Reaktion von Methyljodid mit Cyanid-Ion

1966 ◽  
Vol 21 (9) ◽  
pp. 1377-1384
Author(s):  
A. V. Willi
Keyword(s):  
Transition State ◽  
Secular Equation ◽  
Isotope Effects ◽  
Force Constants ◽  
Bond Breaking ◽  
Bending Force ◽  
A Value ◽  
Order Of Magnitude ◽  
Deuterium Isotope Effects ◽  
The Difference

Kinetic carbon-13 and deuterium isotope effects are calculated for the SN2 reaction of CH3I with CN-. The normal vibrational frequencies of CH3I, the transition state I · · · CH3 · · · CN, and the corresponding isotope substituted reactants and transition states are evaluated from the force constants by solving the secular equation on an IBM 7094 computer.Values for 7 force constants of the planar CH3 moiety in the transition state (with an sp2 C atom) are obtained by comparison with suitable stable molecules. The stretching force constants related to the bonds being broken or newly formed (fCC, fCC and the interaction between these two stretches, /12) are chosen in such a way that either a zero or imaginary value for νʟ≠ will result. Agreement between calculated and experimental methyl-C13 isotope effects (k12/ k13) can be obtained only in sample calculations with sufficiently large values of f12 which lead to imaginary νʟ≠ values. Furthermore, the difference between fCI and fCC must be small (in the order of 1 mdyn/Å). The bending force constants, fHCI and fHCC, exert relatively little influence on k12/k13. They are important for the D isotope effect, however. As soon as experimental data on kH/kD are available it will be possible to derive a value for fHCC in the transition state if fHCI is kept constant at 0.205 mdynA, and if fCI, fCC and f12 are held in a reasonable order of magnitude. There is no agreement between experimental and calculated cyanide-C13 isotope effects. Possible explanations are discussed. — Since fCI and fCC cannot differ much it must be concluded that the transition state is relatively “symmetric”, with approximately equal amounts of bond making and bond breaking.

Analisis Skrining Fitokimia dan Aktivitas Antioksidan Ekstrakk Biji Sangrai Kopi Robusta (Coffea canephora) dari Tanaman Hasil Pemupukan Organik dan Anorganik

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Farah Aida Qotrun Nada ◽  
Tintrim Rahayu ◽  
Ari Hayati
Keyword(s):  
Statistical Tests ◽  
Linear Regression Analysis ◽  
Coffea Canephora ◽  
Coffee Bean ◽  
Phytochemical Screening ◽  
Robusta Coffee ◽  
A Value ◽  
Coffee Beans ◽  
Ic50 Value ◽  
The Difference

Ground coffee is coffee beans that have been roasted, ground or ground so that they have a smooth shape. The purpose of this study was to determine the content of compounds in robusta coffee roasted seed extract (Coffea canephora) from plants produced by organic and inorganic fertilization, and to know the difference in compounds between the results of organic and inorganic fertilization. The characteristics of phytochemical screening were carried out qualitatively on alkaloids, flavonoids, tannins, terpenoids and saponins and the antioxidant activity was carried out by the DPPH (1,1-dipenyl-2-picrihidrazil) method. Phytochemical screening characteristic test results show that robusta coffee bean extract extract from the results of organic and inorganic fertilization both contain flavonoids, alkaloids, tannins, and saponins, while the antioxidant test activity of robusta coffee beans extracts shows differences based on the results of statistical tests of linear regression analysis with the IC50 value the highest antioxidant content was inorganic coffee roasted bean extract only 14.0629 ppm compared to the organic roasted extract with a value of 30.6159 ppmKeywords: Robusta Coffee (Coffea canophora), Phytochemical Screening, DPPH MethodABSTRAKKopi bubuk adalah biji kopi yang telah disangrai digiling atau ditumbuk sehingga mempunyai bentuk halus. Tujuan dari penelitian ini adalah untuk mengetahui kandungan senyawa dalam ekstrak biji sangrai kopi robusta (Coffe canephora) dari tanaman hasil pemupukan organik dan anorganik, dan mengetahui perbedaan senyawa antara hasil pemupukan organik dan anorganik. Karakteristik skrining fitokimia dilakukan secara kualitatif yang dilakukan terhadap alkaloid, flavonoid, tanin, terpenoid dan saponin dan aktivitas antioksidan dilakukan dengan metode DPPH (1,1-difenil-2-pikrihidrazil). Hasil uji karakteristik skrining fitokimia menunjukkan bahwa ekstrak biji sangrai kopi robusta dari hasil pemupukan oganik dan anorganik keduanya sama mengandung senyawa flavonoid, alkaloid, tanin, dan saponin,  sedangkan pada aktifitas uji antioksidan ekstrak biji sangrai kopi robusta menunjukan perbedaan berdasarkan hasil uji statistik analisis regresi linear dengan nilai IC50 kadar antioksidan paling tinggi adalah ekstrak biji sangrai kopi anorganik hanya 14,0629 ppm dibandingkan dengan ekstrak sangrai dari organik dengan nilai 30,6159 ppm.Kata kunci : Kopi Robusta (Coffea canophera), Skrining Fitokimia, Metode DPPH

ETUDE DU POUVOIR NUTRITIF EN PHOSPHORE DE CERTAINS SOLS DU QUEBEC A L'AIDE DU 32P

1976 ◽  
Vol 56 (3) ◽  
pp. 285-291
Author(s):  
B. TOUATI ◽  
C. PLENCHETTE ◽  
M. TABI
Keyword(s):  
Soil Phosphorus ◽  
Phosphate Fertilizer ◽  
Soil Types ◽  
K Value ◽  
Type Experiment ◽  
A Value ◽  
The Difference ◽  
The Way

In a pot-type experiment with ryegrass, 32P was used to label isotopically exchangeable soil phosphorus as well as a phosphate fertilizer. The tagging of both forms of phosphorus enable us to determine the pool (L) for soil reserves and the A value which is the availability of these reserves in the presence of fertilizer. The authors establish correlations between the ratio K = L/A and the assimilable phosphorus as determined by the Bray II method, and also between K and the "extra" phosphorus. The authors state that the latter was the difference between the plant phosphorus with and without fertilizer. From this study it is concluded: (1) that the K value seems to be a better criterion than the amount of assimilable phosphorus to estimate the phosphorus fertility of a soil; (2) that the study of the variation of the K value according to the soil types informs us about the reserves behavior and about the way of nutrition for the plant. The calculation of the K value is aimed toward a more adequate fertilization for given types of soil.

scholarly journals Archie's law – a reappraisal

Solid Earth ◽  
2016 ◽  
Vol 7 (4) ◽  
pp. 1157-1169 ◽  
Author(s):  
Paul W. J. Glover
Keyword(s):  
Systematic Errors ◽  
Apparent Paradox ◽  
Archie’S Law ◽  
A Value ◽  
The Difference ◽  
Reservoir Parameter ◽  
Parameter Values ◽  
Electrical Data ◽  
Extra Parameter ◽  
Better Than

Abstract. When scientists apply Archie's first law they often include an extra parameter a, which was introduced about 10 years after the equation's first publication by Winsauer et al. (1952), and which is sometimes called the “tortuosity” or “lithology” parameter. This parameter is not, however, theoretically justified. Paradoxically, the Winsauer et al. (1952) form of Archie's law often performs better than the original, more theoretically correct version. The difference in the cementation exponent calculated from these two forms of Archie's law is important, and can lead to a misestimation of reserves by at least 20 % for typical reservoir parameter values. We have examined the apparent paradox, and conclude that while the theoretical form of the law is correct, the data that we have been analysing with Archie's law have been in error. There are at least three types of systematic error that are present in most measurements: (i) a porosity error, (ii) a pore fluid salinity error, and (iii) a temperature error. Each of these systematic errors is sufficient to ensure that a non-unity value of the parameter a is required in order to fit the electrical data well. Fortunately, the inclusion of this parameter in the fit has compensated for the presence of the systematic errors in the electrical and porosity data, leading to a value of cementation exponent that is correct. The exceptions are those cementation exponents that have been calculated for individual core plugs. We make a number of recommendations for reducing the systematic errors that contribute to the problem and suggest that the value of the parameter a may now be used as an indication of data quality.

scholarly journals Terapi Musik terhadap Depresi pada Lansia

2019 ◽  
Vol 13 (2) ◽  
pp. 72-81
Author(s):  
Theresia Widyastuti
Keyword(s):  
Music Therapy ◽  
Geriatric Depression Scale ◽  
Depression Scale ◽  
Sampling Technique ◽  
The Elderly ◽  
Rank Test ◽  
A Value ◽  
Before And After ◽  
The Difference ◽  
Quasi Experiment

 Depression is a mood disorder that is generally characterized by hopelessness, excessive helplessness, and lack of enthusiasm for life. Starting from stress that is not overcome, then a person can fall into a phase of depression. This study aims to look at the effect of providing music therapy in reducing depression in the elderly before and after being given a commitment. To achieve this goal, this study uses a quasi-experimental method (Quasi Experiment). The type of research design used is Quasi Experiment with one group pretest and posttest design. The sampling technique was purposive sampling where participants based on population criteria obtained a sample of 16 people. Data collection methods using tests with a scale measuring instrument namely Geriatric Depression Scale (GDS) consisting of 30 item questions, observation methods and interview methods .. Based on data analysis it was concluded that the results obtained were Man Whitney Test U = 0.500 with a value of p = 0.001 ( p <0.01) where the mean ranks on the gain score is 12.44 and the sum of ranks is 99.50, this shows the difference in effectiveness of the effects of music therapy before and after treatment and to test the difference in levels of depression before and after being given music therapy using Wilcoxon Sign Rank test analysis . the results obtained z value = -2.539 with a value of p = 0.11 (p <0.01) so that it can be concluded that there are differences in changes in the level of depression in the elderly before and after given treatment.

scholarly journals ANALISIS PENERAPAN PEMUNGUTAN PAJAK PERTAMBAHAN NILAI PADA BUMN SEBAGAI PEMUNGUT DAN TIDAK SEBAGAI PEMUNGUT PAJAK PERTAMBAHAN NILAI (STUDI KASUS PADA PT PELABUHAN INDONESIA III Cabang Benoa)

2018 ◽  
Vol 1 (2) ◽  
Author(s):  
Agista Ayu Aksari
Keyword(s):  
Data Analysis ◽  
Value Added ◽  
The State ◽  
Assessment System ◽  
Sales Tax ◽  
Value Added Tax ◽  
Self Assessment ◽  
A Value ◽  
The Difference

On 1st July 2012 SOE (State-Owned Enterprises)become the Value Added Tax (VAT) collector. According to the regulation of the Ministher of Finance No.85/PMK.03/2012 about the appointment of the State Owned Enterprises to collect, deposit and reporting Value Added Tax (VAT) and Sales Tax on Luxurious Goods, and precedures for collecting, depositing and reporting. The purpose of this research is to determine the difference between SOE as a Value Added Tax collector and not as a Value Added Tax collector.The object of this research is PT Pelabuhan Indonesia III cabang Benoa. The data analysis in this research is to analyze the calculation and reportig of VAT before being VAT collector and when it became VAT collector.The result of this research it is known that are the application of the value added tax on PT Pelabuhan Indonesia III Cabang Benoa before becoming tax collector is charged directly by fiskus and has official assessment system and as a PT Pelabuhan Indonesia III Cabang Benoa has a self assessment system whereby PT Pelabuahan Indonesia III Cabang Benoa became ILL wapu. Differnce in PT Pelabuhan Indonesia III Cabang Benoa as a collector, and the collector Is a time before becoming a collector has aself just my assessment system whereas before becoming a collector has official assessment system. Tax eceipt when it became a collector of VAT using duplicate counts 3 before becoming a collector only uses 2 of the double. For SSp before becoming a duplicate while using 4 collector as a collector to use duplicate. DOI 10.5281/zenodo.1214932

scholarly journals PENERAPAN METODE MULTI ATTRIBUTE UTILITY THEORY (MAUT) DALAM PEMETAAN TINGKAT DAMPAK BENCANA BANJIR DI KABUPATEN BANTUL

Telematika ◽  
2020 ◽  
Vol 17 (1) ◽  
pp. 26
Author(s):  
Afif Irfan Abdurrahman ◽  
Bambang Yuwono ◽  
Yuli Fauziah
Keyword(s):  
Utility Theory ◽  
Matrix Multiplication ◽  
Flood Disaster ◽  
Accuracy Rate ◽  
Affected Area ◽  
A Value ◽  
Multi Attribute Utility Theory ◽  
The Matrix ◽  
The Difference ◽  
The Impact

Flood disaster is a dangerous disaster, an event that occurs due to overflow of water resulting in submerged land is called a flood disaster. Almost every year Bantul Regency is affected by floods due to high rainfall. The flood disaster that struck in Bantul Regency made the Bantul District Disaster Management Agency (BPBD) difficult to handle so that it needed a mapping of the level of the impact of the flood disaster to minimize the occurrence of floods and provide information to the public.This study will create a system to map the level of impact of floods in Bantul Regency with a decision support method namely Multi Attribute Utility Theory (MAUT). The MAUT method stage in determining the level of impact of flood disasters through the process of normalization and matrix multiplication. The method helps in determining the areas affected by floods, by managing the Indonesian Disaster Information Data (DIBI). The data managed is data on criteria for the death toll, lost victims, damage to houses, damage to public facilities, and damage to roads. Each criteria data has a value that can be used to determine the level of impact of a flood disaster. The stages for determining the level of impact of a disaster require a weighting calculation process. The results of the weighting process display the scoring value which has a value of 1 = low, 2 = moderate, 3 = high. To assist in determining the affected areas using the matrix normalization and multiplication process the process is the application of the Multi Attribute Utility Theory (MAUT) method.This study resulted in a mapping of the level of impact displayed on google maps. The map view shows the affected area points and the level of impact of the flood disaster in Bantul Regency. The mapping produced from the DIBI data in 2017 produced the highest affected area in the Imogiri sub-district. The results of testing the data can be concluded that the results of this study have an accuracy rate of 95% when compared with the results of the mapping previously carried out by BPBD Bantul Regency. The difference in the level of accuracy is because the criteria data used are not the same as the criteria data used by BPBD in Bantul Regency so that the accuracy rate is 95%.

scholarly journals Hubungan antara Kedalaman Permukaan Air Tanah dengan Salinitas di Pesisir Pantai Kungkai Baru serta Penggunaan Model Discovery Learning

2018 ◽  
Vol 2 (2) ◽  
pp. 178-182
Author(s):  
Sutijo Joko Sudiro ◽  
Muchammad Farid ◽  
Eko Swistoro
Keyword(s):  
Learning Outcomes ◽  
Learning Model ◽  
Discovery Learning ◽  
High Ability ◽  
Significance Level ◽  
Average Value ◽  
A Value ◽  
Quasi Experimental ◽  
The Difference ◽  
The Relationship

ABSTRACT [Relationship between Groundwater Surface Depth with Salinity at the Coast of New Kungkai Beach and its Implementation on Discovery Learning Model]. The aims of this study were 1) to describe the relationship between groundwater surface depth with salinity in the coastal areas of new kungkai beach of Seluma, and 2) to determine the improvement of learning outcomes (cognitive) of high ability students, moderate and low by using discovery learning model on the concept of static fluid in class X computer and network engineering at SMK Negeri 3 Seluma. This research was a quasi experimental research with one groups pretest-posttest design. The results showed: 1) The relationship between depth with salinity has a value of 0.6478 with a significance level of 0.001 (<0.05); 2) Learning with discovery learning model can improve student learning outcomes on cognitive aspects (knowledge). Increased cognitive results can be seen from the average value of the initial test, the final test and the average value of gain in the class x Tkj is high-ability groups are at high criteria with a value of 0.75 gain in the group is in the criteria medium with the value of gain 0,52 and in the low group were in moderate criteria with a gain value of 0.44. There is a difference in learning outcomes between the high, medium and low groups. The difference is shown by Fcount > Ftable (4.04 > 3.35) with a significance level of 5%. Keywords: Groundwater surface depth; salinity; discovery learning model; SMKN 3 Seluma.

scholarly journals STRATEGI PENGEMBANGAN PRODUK KERUPUK KEMPLANG DENGAN METODE SWOT DI UMKM DUA PUTRI BUMI WARAS KOTA BANDAR LAMPUNG

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Peri Daya Pratama ◽  
Keyword(s):  
Data Collection ◽  
Research Data ◽  
Strength Factor ◽  
A Value ◽  
The Difference ◽  
High Level ◽  
Price Differences

Abstract The strategy of developing kemplang cracker products in Dua Putri UMKM sub-district of Bumi Waras, Bandar Lampung city is experiencing a high level of competition, the aim of this research is to produce a strategy that is in accordance with the conditions of the Dua Putri UMKM in developing a business, and to provide strategic input from the results of the research. Data collection techniques in this study were carried out by observation, interviews and questionnaires then analysed by SWOT. It is known that the IFAS value is 3,36080 with a strength factor having a value of 2.51632 and a weakness of 0.84448 with a difference in value (+) of 1.67184. and the EFAS value is 2.82229 with the opportunity factor having a value of 2.30108 and the threat factor 0.52121 with the difference in value (+) 1.77987. This value indicates that the organization is experiencing a period of growth both in sales, taste, and price differences. UMKM two putri kemplang crackers are on average in her quest to pursue a strategy of exploiting strengths to overcome weaknesses. From the results of the Cartecius diagram, that kemplang cracker Dua Putri UMKM are in quadrant 1 (one), namely an aggressive strategy, where this UMKM is in a very favorable position, this UMKM has the opportunity and strength so that it can take advantage of the existing opportunities

Sign in / Sign up

Export Citation Format

Share Document