scholarly journals ОСНОВНІ МАТЕРІАЛИ В ДИЗАЙНІ СУЧАСНИХ КОРПУСНИХ МЕБЛІВ КУХНІ

2020 ◽  
pp. 15-27
Author(s):  
В. А. Абизов ◽  
Р. М. Агліуллін
Keyword(s):  
Comprehensive Analysis ◽  
Educational Process ◽  
High Price ◽  
Point System ◽  
Environmental Friendliness ◽  
Aesthetic Appearance ◽  
Analysis And Synthesis ◽  
Kitchen Cabinet ◽  
Materials Used ◽  
The Cost

The purpose of the article is to analyze the basic materials used in the design of modern cabinet furniture in the kitchen and determine their qualitative and aesthetic gradations.The article applies methods of analysis and synthesis and information processing. The varieties and characteristics of materials for the manufacture of kitchen cabinet furniture of modern apartments from the existing range of materials are analyzed. Materials for the manufacture of kitchen furniture were classified and divided into certain categories, their use in these categories was also determined. It was proposed to classify the materials that are used in the manufacture of kitchen furniture in modern apartments according to qualitative and aesthetic gradation. The criteria for assessing the qualitative and aesthetic gradation of materials are: naturalness and environmental friendliness of materials, reuse of materials, use of innovative technologies and solutions. The cost of the material according to the 100-point system highlighted a definite connection between the high price of the material and its qualitative and aesthetic appearance. One of the main criteria of modern production is the ability to combine materials and the use of materials in original places of structures. The possibility of varying and combining, the use of materials in original places of designs - gives the product uniqueness and competitiveness in the furniture market. A comprehensive analysis of the basic materials used in the design of modern cabinet furniture in the kitchen is carried out and their qualitative and aesthetic gradations, the estimated ball cost of the materials are determined, and options for combining materials are proposed. The results can be used by designers in the design of kitchen cabinet furniture of modern apartments, as well as in their subsequent production. The results of the study give an image of the materials in the design of modern cabinet furniture, and will help not only in professional design, but also in the educational process.

Concerning the abuse of power by an official

2020 ◽  
pp. 103-110
Author(s):  
Ihor Oheruk
Keyword(s):  
Criminal Code ◽  
Comprehensive Analysis ◽  
Practical Significance ◽  
Abuse Of Power ◽  
Government Functions ◽  
Analysis And Synthesis ◽  
The Status ◽  
The Subject ◽  
Criminal Legislation ◽  
Logical Semantic

Purpose. The purpose of the work is to analyze the application of the second and third parts of Article 3692 of the Criminal Code of Ukraine to officials in the context, that defines them by the Criminal Code of Ukraine in the note to Article 364 of the Criminal Code of Ukraine. Methodology. The methodology includes a comprehensive analysis and synthesis of the available scientific and theoretical material and the formulation of relevant conclusions and recommendations. In the course of the study, the following methods of scientific knowledge were used: terminological, logical-semantic, system-structural, logical-normative. Results: in the course of research the cause of criminalization of such act as "abuse of power" is considered, the subject of the specified criminal act which has the features of "an official" in the context, that defines it by the note to Article 364 of the Criminal Code of Ukraine is analyzed and the main ways of committing criminal acts, that are provided for in this article of the Criminal Code of Ukraine are identified. Originality. The study found, that one of the key conditions for the opportunity to influence officials, that are authorized to perform government or local self-government functions, is the position held by the official and the related opportunities. Therefore, taking into account the opinion of the scientists, that the subject of crimes, that are provided for by the second and third parts of Article 3692 is special, the peculiarities of which is the cumulative feature, that denotes, that such person is not endowed with the status of an official, well-founded need to specify the criminal legislation of Ukraine in terms of the application the second and third parts of Article 3692 of the Criminal code of Ukraine concerning officials in the context, that defines them by the criminal legislation of Ukraine in the note to Article 364 of the Criminal Code of Ukraine. Practical significance. The research results can be used in lawmaking in the improvement of anti-corruption legislation.

Parameters Of Technological Processes Reengineering

2020 ◽  
pp. 28-33
Keyword(s):  
Spatial Organization ◽  
Parametric Model ◽  
Practical Significance ◽  
Machine Time ◽  
Time Machine ◽  
Technological Processes ◽  
Technical Capability ◽  
Materials Used ◽  
The Cost ◽  
Qualitative Characteristics

The article is devoted to reengineering of technological processes - a method of their qualitative transformation on an innovative basis, which in turn assumes the availability of tools that make it possible to establish the economic efficiency and technical capability of such transformations of construction production, to identify the effect of their implementation. In this regard, the problem of forming a parametric model of reengineering of construction technological processes, which involves four enlarged groups of indicators that reflect the quantitative and qualitative characteristics of the processes: materials used, working time, machine time, spatial organization, is considered. It is established that parameters can have either an absolute (physical, cost) or relative (point, percentage) expression and also make their own decomposition. The practical significance of the provisions given in the article is determined by the development of methods of technical rationing, which leads to a reduction in the cost and duration of construction.

TECHNICAL AND ECONOMIC EVALUATION OF THE DEVELOPMENT OF A DEVICE FOR THE PREVENTION OF APNEA DURING PHYSIOLOGICAL SLEEP IN HUMANS

2020 ◽  
pp. 198-210
Author(s):  
Сергей Борисович Казаков ◽  
Дмитрий Михайлович Шишов ◽  
Антон Игоревич Ларин ◽  
Александр Петрович Николаев ◽  
Аза Валерьевна Писарева
Keyword(s):  
Sleep Apnea ◽  
Humidity Sensor ◽  
Lung Ventilation ◽  
High Price ◽  
Device Structure ◽  
Artificial Lung Ventilation ◽  
Exact Moment ◽  
The Cost ◽  
Technical Solutions ◽  
Physiological Sleep

В статье представлен обзор существующих технических решений в сфере мониторинга и предотвращения апноэ во сне. Произведён анализ существующих аппаратов для предотвращения апноэ, который показал, что на рынке присутствует большое количество импортных моделей, однако они имеют довольно высокую цену. Разработанный нами Российский аналог проектируемого аппарата, при схожих характеристиках, будет иметь более привлекательную цену, чем у импортных приборов. Интегрирование датчика влажности в персональную маску пациента даёт возможность отслеживать остановки дыхания пациента во время сна, и тем самым включать процесс принудительной подачи дыхательной смеси именно в тот момент, когда она необходима для устранения патологии. Целью научной работы является разработка конструкции прибора и создание алгоритма программы для управления аппарата искусственной вентиляции лёгких для предотвращения апноэ во сне. Показана разработка структуры устройства аппарата. Подобран компрессор и датчик влажности с обоснованными характеристиками для создания аппарата, а также основные элементы. Разработана конструкция корпуса аппарата и разработана компоновка. Выполнено технико-экономическое обоснование разработки аппаратно-программного комплекса для предотвращения апноэ во сне. Показано, что себестоимость готового изделия достаточно конкурентна The article presents an overview of existing technical solutions in the field of monitoring and prevention of sleep apnea. An analysis of existing devices for preventing apnea was made, which showed that there are a large number of imported models on the market, but they have a fairly high price. The Russian analog of the designed device developed by us, with similar characteristics, will have a more attractive price than that of imported devices. The integration of the humidity sensor into the patient's personal mask makes it possible to monitor the patient's breathing stops during sleep, and thus enable the process of forced delivery of the respiratory mixture at the exact moment when it is necessary to eliminate the pathology. The purpose of the research is to develop the device design and create a program algorithm for controlling the artificial lung ventilation device to prevent sleep apnea. The development of the device structure is shown. The compressor and humidity sensor with reasonable characteristics for creating the device, as well as the main elements are selected. The design of the device body and its layout were developed. A feasibility study for the development of a hardware and software system for preventing sleep apnea has been completed. It is shown that the cost of the finished product is quite competitive

scholarly journals Model Predictive Control Strategies to Activate the Energy Flexibility for Zones with Hydronic Radiant Systems

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1195
Author(s):  
Ali Saberi Derakhtenjani ◽  
Andreas K. Athienitis
Keyword(s):  
Control Strategies ◽  
High Price ◽  
Electricity Prices ◽  
Peak Demand ◽  
Heating Systems ◽  
Electrical Grid ◽  
Demand Reduction ◽  
The Cost ◽  
Floor System ◽  
Radiant Floor Heating

This paper presents control strategies to activate energy flexibility for zones with radiant heating systems in response to changes in electricity prices. The focus is on zones with radiant floor heating systems for which the hydronic pipes are located deep in the concrete and, therefore, there is a significant thermal lag. A perimeter zone test-room equipped with a hydronic radiant floor system in an environmental chamber is used as a case study. A low order thermal network model for the perimeter zone, validated with experimental measurements, is utilized to study various control strategies in response to changes in the electrical grid price signal, including short term (nearly reactive) changes of the order of 10–15 min notice. An index is utilized to quantify the building energy flexibility with the focus on peak demand reduction for specific periods of time when the electricity prices are higher than usual. It is shown that the developed control strategies can aid greatly in enhancing the zone energy flexibility and minimizing the cost of electricity and up to 100% reduction in peak power demand and energy consumption is attained during the high-price and peak-demand periods, while maintaining acceptable comfort conditions.

scholarly journals Study of the Electrical Properties of Aluminate Cement Adhesives for Porcelain Insulators

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2232
Author(s):  
Huiwen Wan ◽  
Zhangyin Hu ◽  
Gang Liu ◽  
Jiadong Xiao
Keyword(s):  
Compressive Strength ◽  
Electrical Properties ◽  
Silica Fume ◽  
Drying Time ◽  
Pore Connectivity ◽  
Cement Based Materials ◽  
Porcelain Insulators ◽  
Materials Used ◽  
The Cost ◽  
Aluminate Cement

Electrical properties are one of the essential parameters of cement-based materials used in suspension porcelain insulators. This paper studied the electrical properties of aluminate cement adhesives (ACA) containing silica fume (SF), as well as their compressive strength and porosity. The results indicated that the addition of silica fume improved the resistivity of ACA under a saturated state (relative humidity is 50%). This was mainly attributed to the decrease of the ACA’s pore connectivity due to the SF’s filling effect. However, the early compressive strength of ACA was slightly reduced by the addition of SF. Under an unsaturated state, the ACA’s resistivity without the SF gradually exceeded that with the SF at the extension of drying time. The nuclear magnetic resonance (NMR) results indicated that the addition of SF content increased the ACA’s porosity; for the tiny pores especially, (the size less than 25 nm), this increased by 3.4%. Meanwhile, the addition of SF increased the tortuosity of the ACA’s conductive channels, which could improve its resistivity. Therefore, SF is recommended to be used in cement-based adhesives on insulators to lower the cost and improve the resistivity.

Introduction and dissemination of innovations during the pandemic: the experience of educational organizations in Krasnoyarsk

2021 ◽  
pp. 102-109
Author(s):  
Evgeniya Valerievna Velichko ◽  
◽  
Nadezhda Semyonovna Ageeva ◽  
Olga Nikolaevna Terentyeva ◽  
◽  
...  
Keyword(s):  
Distance Learning ◽  
Management Practices ◽  
Research Result ◽  
Secondary Analysis ◽  
Main Idea ◽  
Educational Process ◽  
Educational Organizations ◽  
Educational Innovations ◽  
Materials Used ◽  
The City

The educational process, not only in our country, but also in the world, has undergone drastic changes since March 2020. The total transition from traditional classroom classes to distance education occurred due to the threat of the coronavirus pandemic (COVID-19). The changes affected not only the learning process, but also the innovative activities that were implemented in educational organizations. The purpose of this article is to describe and analyze the experience of spreading innovations in schools in the city of Krasnoyarsk during the pandemic to identify related problems and ways to solve them. The main idea of the work is to study the transformation of the phenomenon of educational innovations in school education in the context of universal distance learning. Within the framework of the study, the possibility of organizing distance learning and conducting innovative activities during the pandemic was monitored. The survey was conducted for all educational organizations in the city of Krasnoyarsk. Secondary analysis and interpretation of the survey results, systematization and classification of the theoretical and factual materials used, analysis of management practices and experience of educational organizations in the conditions of extreme transition to remote mode were carried out, which together made up the author’s research result. In the course of the work, the key problems faced by the education system of the city of Krasnoyarsk during the transition to remote operation were also identified.

Filling in the gaps in bookkeeping and tax accounting: A comparative analysis of international and Russian practices

2021 ◽  
Vol 24 (3) ◽  
pp. 338-368
Author(s):  
Ekaterina V. OLOMSKAYA ◽  
Andrei A. AKSENT'EV
Keyword(s):  
Information Systems ◽  
Tax Planning ◽  
Accounting System ◽  
Accounting Systems ◽  
Accounting Information System ◽  
Foreign Countries ◽  
Analysis And Synthesis ◽  
The Cost ◽  
The Impact ◽  
Tax Accounting

Subject. This article explores the origination of the differences between bookkeeping and tax accounting, and their impact on decision-making. Objectives. The article aims to examine the reasons for the discrepancies between bookkeeping and tax accounting, reveal some aspects of accounting of differences from the position of their registration in a uniform accounting system or two parallel systems, if available, and determine the impact of such gaps on investment and management decisions. Methods. For the study, we used analysis and synthesis, observation, comparison, and the dialectical and data collection methods. Results. The article reveals the key features of the interaction between bookkeeping and tax accounting in Russia and foreign countries. It justifies that in today's economic realities, addressing shortcomings between these information systems is not a necessity, and shows the possible impact of differences on investment decisions. The article also graphically presents the application of cost-plus and balance-based methods of accounting for deferred taxes depending on the way information systems are organized, as well as their comparative characteristics. Conclusions and Relevance. The discrepancies between the two accounting systems provide an opportunity to assess the impact of tax planning on drawing a veil over the accounting profit. Studying the cost and balance methods, as well as the dialectic of the interaction of tax planning with the accounting information system, remain relevant. The results of the study can be useful to accounting and tax specialists, and other stakeholders who are studying the interactions of these information systems.

Pedagogical Conditions for the Stage Image Formation of the Vocal Teacher in the Process of Professional Training

2020 ◽  
Vol 6 (2) ◽  
pp. 164-172
Author(s):  
Marianna A. Sukholova
Keyword(s):  
Music Education ◽  
Professional Education ◽  
Professional Training ◽  
Comparative Method ◽  
Image Formation ◽  
Learning Technologies ◽  
Educational Process ◽  
Professional Activities ◽  
Analysis And Synthesis ◽  
Creative Self

The study of pedagogical conditions for the formation of the stage image of vocal teachers is a topical issue in the context of improving the quality of professional music education in Ukraine, as well as in the world. The purpose of the article is to study the pedagogical conditions that contribute to the effective formation of the stage image of the future vocal teacher in the process of his professional education. The methodological basis of the study is the theoretical methods of scientific knowledge (analysis and synthesis, classification method, comparative method). Also, in the context of this study, a theoretical analysis of scientific sources was conducted. The article highlights and substantiates the pedagogical conditions for the formation of the stage image of a vocal teacher in the process of professional education: the creation of models of their own future based on the activation of “I-real” and “I-ideal”; providing motivation for performing and creative stage selfrealization of future specialists; application of personality-oriented models and learning technologies aimed at developing the student's individuality and providing conditions for the development of their abilities and creative self-realization in professional activities; diversification of practical forms of organization of the educational process It is emphasized that the basis of the stage image is a combination of personal and professional characteristics and psychological archetypes, which are the basis of image formation, which should correspond to the character of the vocalist the best human qualities and powerful informational-creative potential of the person. It is emphasized that according to the personality-oriented concept of education, priority is given to the development of personality, rather than the learning process, which is an important aspect in the process of forming the stage image of personality. The practical value of the work is that the results of the study can be used to increase the efficiency of the educational process, as well as to improve the professional qualities of vocal teachers

Paperometer: A Low-Cost Incentive Spirometer

2020 ◽  
Author(s):  
Shonit Nair Sharma ◽  
Devrina Chidambaram ◽  
Gianna Mizzi ◽  
Daniel Rosen ◽  
Kristin Slaughter ◽  
...  
Keyword(s):  
Lung Function ◽  
Medical Devices ◽  
Low Cost ◽  
Environmental Friendliness ◽  
Global Pandemic ◽  
Innovative Solution ◽  
Repeated Use ◽  
Functional Prototype ◽  
The Cost ◽  
Respiratory Rehabilitation

Abstract As a preemptive response to the widespread need for respiratory medical devices developing in the wake of the COVID-19 pandemic, we propose a low-cost incentive spirometer for respiratory rehabilitation in patients with reduced lung function. An incentive spirometer manufactured entirely out of recyclable material, termed “Paperometer,” aims to address the multifaced problem of medical device inaccessibility: high cost, lack of user- or environmental-friendliness, and unavailability to those who need them the most. Operating in accordance with governing physical formulae including Ohm’s law and the Hagen-Poiseuille equation, Paperometer is intended to improve the user’s lung function through repeated use of the device, which facilitates slow, deep breaths of air. Several prototypes were created based on a list of design criteria established through background research and stakeholder interviews. From four initial prototypes, all created predominantly from simple foldable geometries, one design was selected for further iteration. The most promising functional prototype was crafted from recyclable plastic and paper folded into various shapes including a box, tube, and pinwheel. The Paperometer concept stands as an innovative solution to reduce the cost and environmental burden of meeting the demand for medical devices. Once validated, the device may serve as an important tool in combating the ongoing global pandemic.

scholarly journals The increased use value of bamboo leaves as silica source for t-type zeolite synthesis

2018 ◽  
Vol 197 ◽  
pp. 05003 ◽  
Author(s):  
Soni Setiadji ◽  
Citra Deliana Dewi Sundari ◽  
Endang Lala ◽  
Denia Febby Nurbaeti ◽  
Ira Novianti ◽  
...  
Keyword(s):  
Sem Analysis ◽  
High Price ◽  
Heating Process ◽  
Zeolite Synthesis ◽  
X Ray Diffraction ◽  
Cost Performance ◽  
Silica Source ◽  
Bamboo Leaves ◽  
Type Zeolite ◽  
The Cost

T-type zeolite can be used as catalyst, adsorbent, and membranes for gas separation. The synthesis of T-type zeolite needs to be optimized in both of the method and source of precursor, because of its relatively high price. In this research, the synthesis is done using silica extracted from bamboo leaves instead of commercial silica. This increases the value of the bamboo leaves and the cost-performance of zeolite synthesis. The silica was extracted from bamboo leaves ash using alkaline solvent. The extracted silica has 81.76% of purity and an amorphous phase. The T-type zeolite was synthesized using the molar composition of 0.15 Na2O : 0.025 Al : 0.15 K2O : 1 SiO2 : 15 H2O : 0.06 TMAOH, under hydrothermal method and heating process for 4 days, 60°C for 2 days and 120°C for the next 2 days. The characterization method using X-Ray Diffraction and Infra-Red Spectroscopy were performed to confirm the formation of T-type zeolite. The results of Scanning Electron Microscope (SEM) analysis show that the formed T-type zeolite has erionite cylindrical crystal shape.

Sign in / Sign up

Export Citation Format

Share Document