Rancang Bangun Sistem Komunikasi Data Antara Mikrokontroller Atmega8 Dengan Arduino Pada Mesin Roaster Coffe Digital

2020 ◽  
Vol 3 (2) ◽  
pp. 103-113
Author(s):  
Rachmad Ikhsan ◽  
Effendi Effendi
Keyword(s):  
Temperature Sensor ◽  
Data Communication ◽  
Test Results ◽  
Industry Standards ◽  
Long Time ◽  
Roasting Time

Roasting coffee manually is widely applied by coffee producers. This process takes a very long time and is less efficient in terms of productivity for industry standards. This machine  is equipped with a thermocouple sensor as a temperature sensor that will measure the temperature in the roasting cylinder, then equipped with a timer as a reminder of roasting time that ranges from 15 minutes at a temperature of 200 degrees Celsius, this machine  is also equipped with android as a timer controller on the coffee roaster machine. This machine is also equipped with a microcontroller and Bluetooth as a media transmitter and data receiver. From the test results obtained data that Bluetooth can be used for data communication between the microcontroller and Android with a distance of 30 meters in the room, and 12 meters outside the room. If it exceeds that distance, then Bluetooth will not respond back

The Nonlinear Roll Damping of a FPSO Hull

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Allan C. de Oliveira ◽  
Antonio Carlos Fernandes
Keyword(s):  
Nonlinear Damping ◽  
Challenging Problem ◽  
Roll Damping ◽  
Ship Hulls ◽  
Damping Behavior ◽  
Industry Standards ◽  
Long Time ◽  
Technological Developments ◽  
Traditional Approaches ◽  
The 19Th Century

The ship-rolling problem is a subject that has been studied for a long time. Since Froude's time (in the 19th century) to nowadays, this subject was revisited several times in order to adjust the theory to changes in ship hulls, dimensions, materials, appendages, etc. On the other hand, ship analysis technological resources, including both experimental techniques and computational capacity (that did not exist in Froude's time), have also amazingly improved. But despite all those technological developments, the assessment of the nonlinear roll damping of some types of hulls still is a challenging problem. The floating production storage and offloading (FPSO) hull fitted with larger bilge keels, for instance, has behaved in such a way that it is impossible to obtain results from nowadays industry standards via decaying tests. This paper discusses an alternative way to assess the nonlinear damping behavior of FPSO hulls with large bilge keels. Since it is fairly easy to perform decaying tests, the paper also proposes an alternative way to analyze the FPSO properties through this kind of testing by grouping multiple results instead of using only a single test. This artifice brought improvements, such as an increased agreement between the alternative model and the experimental data. The paper also compares the more traditional approaches with the alternative method and finally shows the latter's applicability.

Creep Tests of Rotating Disks at Elevated Temperature and Comparison With Theory

1954 ◽  
Vol 21 (3) ◽  
pp. 225-235
Author(s):  
A. M. Wahl ◽  
G. O. Sankey ◽  
M. J. Manjoine ◽  
E. Shoemaker
Keyword(s):  
Elevated Temperatures ◽  
Experimental Program ◽  
Test Results ◽  
Rotating Disks ◽  
Creep Tests ◽  
Shear Theory ◽  
Heat Treated ◽  
Long Time ◽  
Average Tension ◽  
Creep Deformations

Abstract A theoretical and experimental program involving methods of calculating creep in rotating disks at elevated temperatures is described. This program consisted primarily of the following: (a) Obtaining forged disks from the same ingot of 12 per cent chrome steel, all disks being forged and heat-treated in the same manner; (b) making spin tests at 1000 F on three of these disks for periods up to about 1000 hr; ( ) making long-time tension-creep tests at 1000 F on many specimens cut out circumferentially from several of the other disks at stresses approximating those of the spin tests; (d) investigating theoretical methods of calculation of creep deformation in such disks; and (e) comparison of spin-test results with those calculated theoretically using average tension-creep data. It was found that available methods of calculating rotating disks based on the Mises criterion gave creep deformations too low compared to the test values, i.e., on the unsafe side for design. Considerably better agreement between test and theoretical results is obtained if the latter is based on the maximum-shear theory. Some discussion is given of the reasons for the better agreement obtained using the latter theory; these are believed to be related in part to the anisotropy of the forged material tested. Further tests on other materials are necessary before general conclusions can be drawn; however, in the absence of test data it is suggested that a conservative course in design for such disks is to apply the maximum-shear theory.

scholarly journals Design and Implementation of Wireless Sensor Cellular Network Based on Android Platform

2017 ◽  
Vol 13 (05) ◽  
pp. 56
Author(s):  
Yan Chen
Keyword(s):  
Wireless Sensor Network ◽  
Sensor Network ◽  
Cellular Network ◽  
Data Communication ◽  
Wireless Sensor ◽  
Test Results ◽  
Design And Implementation ◽  
Gateway System ◽  
Android Platform ◽  
The Times

With the progress of the times, the network has grown into the people's work and life. The limitations of the traditional wireless sensor network (WSN) have become increasingly prominent, and it is obviously unable to meet the requirements of Internet access. Therefore, the 4G mobile Android system is used as a carrier, to design an application layer gateway system for realizing wireless communication between wireless sensor networks and heterogeneous cellular networks, so as to build wireless sensor cellular network. The design and implementation of the AP module, data receiving and forwarding module, network packet loss management and retransmission of the gateway systemis the focus, and then the implemented gateway system is tested. The test results show that the design of the Android platform wireless sensor network gateway system can connect the sensor network to the cellular network, so as to realize data communication, and to ensure that the data loss rate is less than 0.1%. Through testing, it is concluded that the system can meet the actual demand

scholarly journals THE FIRST INVESTIGATION OF AAC(6’)-Ib ENZYME IN CARBAPENEM-RESISTANT ENTEROBACTERIACEAE ISOLATED FROM INDONESIAN PATIENTS

2019 ◽  
Vol 2 (1) ◽  
pp. 8-14
Author(s):  
Beauty Novianty ◽  
Ella Amalia ◽  
Ziske Maritska ◽  
Yuwono Yuwono ◽  
Lusia Hayati
Keyword(s):  
Resistance Mechanism ◽  
Test Results ◽  
Gram Negative ◽  
Therapy Options ◽  
The Past ◽  
Carbapenem Resistant ◽  
Long Time ◽  
Pcr Method ◽  
Vitek 2 ◽  
Carbapenem Resistant Enterobacteriaceae

Background: Over the past decade, numbers of Carbapenemase Producing-Carbapenem Resistant Enterobacteriaceae (CP-CRE) has been increasing worldwide and it has been becoming a threat because of its resistance against carbapenem which is considered as the “last resort” antibiotic. Therapy options for its infection are still limited. Aminoglycoside serves as one of the most commonly used antibiotics, but the resistance against it has already been presented for a long time. Aminoglycoside Modifying Enzyme (AME) is the most important resistance mechanism against aminoglycoside. AAC(6’)-Ib enzyme is one of the most common AME produced by the gram-negative bacteria.Objectives: This study wished to identify the gene of this enzyme among CRE isolated from infected Indonesian patients in Dr. Mohammad Hoesin Hospital Palembang.Methods: Twenty-eight isolates collected from CRE-infected patients identified by Vitek 2 Compact (bioMerieux, USA) in dr. Mohammad Hoesin Hospital Palembang during September—November 2017. AAC(6’)-Ib gene was identified using PCR method, then visualize by electrophoresis. The result is then analyzed by comparing it with a susceptibility test.  Results: Out of 28 samples, AAC(6’)-Ib is identified in 22 (78.57%) samples. Samples with AAC(6’)-Ib showed to be less resistant to various antibiotics, significantly to amikacin (p=0.023).Conclusion: AAC(6’)-Ib gene is found in most of samples implying its frequent occurrence in Indonesian patients.

scholarly journals HUBUNGAN PIJAT BAYI DENGAN PERKEMBANGAN MOTORIK BAYI USIA 1 – 12 BULAN DI DESA PUNDUNGSARI BULU SUKOHARJO

2015 ◽  
Vol 3 (1) ◽  
Author(s):  
Rahayu Setyaningsih ◽  
Kristiani Eka Prasetyo Wat ◽  
Asri Utami
Keyword(s):  
Rapid Growth ◽  
Experimental Studies ◽  
Sampling Technique ◽  
Test Results ◽  
Infant Massage ◽  
Chi Square ◽  
The Public ◽  
Touch Therapy ◽  
Mother And Child ◽  
Long Time

AbstractIntroduction: Infant massage is a touch therapy oldest known to the public. Infant massage is one of the communication between mother and child is communication through touch. Infant massage has been known to man for a long time and reduced down - generations. Age 1-12 months is a period of rapid growth that is traversed by the child, including motoric development. Infant massage can provide a stimulus to promote weight and to increase motoric development.The purpose: Of this study was to correlate of infant massage and motoric development in infants aged 1-12 months in District Pundungsari Bulu Sukoharjo.The subjects: Were mother with infants aged 1-12 months, in the District Pundungsari. Sampling is done with total sampling technique. They are 33 sample in this research.Methods: This study was a non-experimental studies, correlation approach. Data obtained by the method of questionare, which is mother has filled the questionare about baby massage in infants aged 1-12 months and motoric development. The data have been collected and analyzed by chi square with p= 0.05. The research found that respondents do baby massage with continue and not continue and motoric development found delayed, normal and advance. After the test results obtained chi square p 0.000 to p <0.05, which means Ha accepted and Ho rejected.The conclusion: Of this study is infant massage correlate with motoric development in infants aged 1-12 months in District Pundungsari Bulu Sukoharjo.Keywords: Infant massage, motoric development

scholarly journals Sistem Komunikasi Suara Bawah Air dengan Metoda Simplex menggunakan Visible Light Communication (VLC)

2019 ◽  
Vol 7 (2) ◽  
pp. 253
Author(s):  
LUCIA JAMBOLA ◽  
ARSYAD RAMADHAN DARLIS ◽  
LITA LIDYAWATI ◽  
DZIKRI FACHRI HUSAENI
Keyword(s):  
Visible Light ◽  
Communication Systems ◽  
Light Transmission ◽  
Visible Light Communication ◽  
Color Filter ◽  
Underwater Communication ◽  
Test Results ◽  
Voice Communication ◽  
Yellow Color ◽  
Long Time

ABSTRAKSistem komunikasi suara bawah air telah dikenal sejak lama, diantaranya sonar dan akustik. Seiring perkembangan zaman dan kemajuan teknologi, kini hadir komunikasi dengan media transmisi cahaya tampak yaitu Visible Light Communication (VLC) yang dapat diterapkan pada komunikasi bawah air. Pada penelitian ini telah dilakukan komunikasi suara bawah air (simplex) menggunakan VLC, dengan media akuarium berisi air dan beberapa pengujian diantaranya menggunakan color filter, didapat hasil pengujian terbaik yaitu tegangan 4,4 Vpp dan frekuensi 3,003 kHz untuk color filter yellow, pengujian menggunakan lensa didapat hasil pengujian terbaik yaitu tegangan 4,4 Vp-p dan frekuensi 3,051 kHz untuk lensa (+50), dan pengujian terakhir menggunakan lampu UV didapat hasil pengujian terbaik dengan tegangan 4,4 Vp-p dan frekuensi 3,010 kHz. Implementasi sistem VLC ini menunjukkan hasil yang baik dan layak untuk diterapkan pada komunikasi suara bawah air (simplex).Kata kunci: VLC, Komunikasi Suara Bawah Air, Simplex. ABSTRACTUnderwater voice communication systems have been known for a long time, including sonar and acoustics. Along with the development and advancement of technology, now there is communication with visible light transmission media, namely Visible Light Communication (VLC) which can be applied to underwater communication. Under this study underwater voice communication (simplex) has been carried out using VLC, with aquarium media containing water and several tests including using a color filter, the best test results obtained are voltage 4.4 Vp-p and frequency 3.003 kHz for yellow color filter, testing using the lens obtained the best test results namely voltage 4.4 Vp-p and frequency 3.051 kHz for lenses (+50), and the last test using UV lights obtained the best test results with a voltage of 4.4 Vp-p and a frequency of 3.010 kHz. The implementation of the VLC system shows good and feasible results to be applied to underwater voice communication (simplex).Keywords: VLC, Underwater Voice Communication, Simplex.

scholarly journals Design of multilayer microfluidic paper chip and its visual detection of pesticide residues

2020 ◽  
Vol 11 ◽  
pp. 170-182
Author(s):  
Li zhi Li ◽  
Han Ping Mao
Keyword(s):  
Pesticide Residues ◽  
Visual Detection ◽  
Channel Structure ◽  
Test Results ◽  
Mixed Effect ◽  
Detection Range ◽  
Long Time ◽  
Paper Chip ◽  
Channel Structures ◽  
High Repeatability

With the increase of China's grain production, the use of pesticides is gradually increasing. Traditional pesticide detection takes a long time and requires expensive experimental instruments, which is not conducive to the rapid and accurate detection of pesticide residues in the field. To solve this problem, this paper proposes a visual detection method of pesticide residues based on multi-layer microfluidic paper chips. The internal channel structure of paper chip is designed from the perspective of efficient mixing. Through the simulation of the mixed effect of three kinds of staggered channel structures, which are arc type, triangle type, and ladder type, the "ladder-type h-0.3, s-2.6" is selected as the best-staggered structure, and the mixing strength is 0.91534. The best simulation structure was tested by a colored reagent, and the image processing of 15 test results was carried out with MATLAB. The average mixing strength was 0.84, and the and the standard deviation was 0.022. The visual detection experiment of acetamiprid and profenofos in cabbage samples was carried out by using the device，The detection range of acetamiprid was 4~72 μg/kg, and the detection range of profenofos was 3~54 μg/kg . The recovery of acetamiprid was 75%~85%, and the recovery of profenofos was 80%~90%. The detection range and recovery rate indicate that the device has high repeatability and accuracy in the actual sample detection

scholarly journals Passive Round-Trip-Time Positioning in Dense IEEE 802.11 Networks

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1193
Author(s):  
Israel Martin-Escalona ◽  
Enrica Zola
Keyword(s):  
Data Communication ◽  
The Novel ◽  
Wireless Devices ◽  
Next Generation Internet ◽  
Trip Time ◽  
802.11 Networks ◽  
Long Time ◽  
Commercial Off The Shelf ◽  
Indoor Scenarios ◽  
Calibration Time

The search for a unique and globally available location solution has attracted researchers for a long time. However, a solution for indoor scenarios, where high accuracy is needed, and Global Positioning System (GPS) is not available, has not been found yet. Despite the number of proposals in the literature, some require too long a calibration time for constructing the fingerprinting map, some rely on the periodic broadcast of positioning information that may downgrade the data communication channel, while others require specific hardware components that are not expected to be carried on commercial off-the-shelf (COTS) wireless devices. The scalability of the location solution is another key parameter for next-generation internet of things (IoT) and 5G scenarios. A passive solution for indoor positioning of WiFi devices is first introduced here, which merges a time-difference of arrival (TDOA) algorithm with the novel fine time measurements (FTM) introduced in IEEE 802.11mc. A proof of concept of the WiFi passive TDOA algorithm is detailed in this paper, together with a thorough discussion on the requirements of the proposed algorithm.

scholarly journals The Effects of Salt on Rheological Properties of Asphalt after Long-Term Aging

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Xin Yu ◽  
Ying Wang ◽  
Yilin Luo ◽  
Long Yin
Keyword(s):  
Rheological Properties ◽  
Complex Modulus ◽  
Saline Water ◽  
Test Results ◽  
Low Frequencies ◽  
Aged Asphalt ◽  
Long Time ◽  
Polymer Modified Asphalt ◽  
Phase Angles

Limited studies in recent years have shown that asphalt pavement subject to seawater in coastal regions or deicing salt in cold regions may be seriously damaged after being soaked in saline water for a long time. However, there is limited research into the influence of salt on rheological properties of asphalt after long-term aging. In this study, rheological properties of unmodified and polymer-modified asphalt after long-term aging were tested after being soaked in different concentrations of salt (0.3%~5%) for different durations (1 day~30 days). Orthogonal array based on the Taguchi method was used for experimental design. The frequency sweep tests were performed on the specimens of aged asphalt after being soaked for complex modulus and phase angle master curves and ultimate fatigue temperature. BBR tests were performed for stiffness. The test results indicate that saline water appears to reduce low temperature properties and fatigue resistance properties and improved high temperature properties of aged asphalt, and it also affects the sensitivity of complex modulus and phase angles at low frequencies.

Evaluation of the Friction Coefficient from the Dynamometer Test of the Aircraft

2005 ◽  
Vol 277-279 ◽  
pp. 757-764
Author(s):  
Gui Aee Woo ◽  
Jeong Woo Jeon ◽  
Ki Chang Lee ◽  
Young Joo Kim
Keyword(s):  
Control Unit ◽  
Hardware In The Loop ◽  
Test Results ◽  
Simulation Test ◽  
Friction Coefficients ◽  
Braking System ◽  
Road Condition ◽  
Long Time ◽  
Improvement Method ◽  
Dynamometer Test

The friction force is the most important factor for the design of control unit in a braking system. For a long time, many researchers have been striving to improve the accuracy in the measurements of friction coefficients [1,2]. However, there were many difficulties because the friction coefficients are affected by a number of conditions and parameters, such as normal force, temperature, characteristics of road condition, and weather. For the development of ABS of the aircraft, the HILS (Hardware-In-the-Loop-Simulation) test and dynamometer test were carried out. For the calculation of the friction coefficients, the wheel moment was measured using the load cell mounted on the housing of the wheel. The test conditions were dry and greasy, with friction coefficients of 0.7 and 0.4, respectively. In this paper, the test results of the friction coefficients were represented and the improvement method was suggested.

Sign in / Sign up

Export Citation Format

Share Document