scholarly journals Evaluation And Selection Of Colour Spaces For Digital Systems

2020 ◽  
pp. 86-94
Author(s):  
Vera L. Zhbanova
Keyword(s):  
Spectral Characteristics ◽  
Colorimetric Method ◽  
Digital Systems ◽  
Colour Difference ◽  
Colour Space ◽  
Digital Devices ◽  
Initial Stage ◽  
Photo Detectors ◽  
The Difference ◽  
Selection Of

The research examined the changing of colour difference by the control colours depending on the choice of colour space when working with matrix photo detector. The spectral characteristics of photo detectors from different manufacturers noticeably differ from each other and from the addition the difference in colour quality between different digital devices. A software method for studying the colour rendition of the image obtained by digital devices based on the selection of an individual colour space for each matrix photo detector is proposed. To analyze and evaluate the capabilities of the spectral characteristics of matrix photo detectors, the control colour method based on the Mansell Atlas was used. The analysis of the obtained parameters of 14 colours was carried out according to various criteria for seven colour spaces: sRGB, AdobeRGB, DCI-P3 RGB, M1N1P1, PAL / SECAM, Wide Gamut RGB, ProPhoto RGB. Also studied the influence of the choice of colour space on the change in the coordinates of the source 6,500 K. Based on the colour differences of the control colours, it is possible to choose the optimal colour space for working with a specific matrix photo detector. The latter will reduce colour distortion at the initial stage of image registration. The ways for improving the colorimetric method of control colours are proposed as applied to digital devices at the software level.

scholarly journals Research into Methods for Determining Colour Differences in the CIELAB Uniform Colour Space

2020 ◽  
pp. 53-59
Author(s):  
Vera L. Zhbanova
Keyword(s):  
Mathematical Formulation ◽  
Colour Difference ◽  
Colour Space ◽  
Digital Devices ◽  
Methods Of Calculation ◽  
Colour Image ◽  
Image Capturing ◽  
Cielab System ◽  
Qualitative Determination

A problem of qualitative determination of the results of colour image capturing by digital devices based on uniform colour systems arises during analysis of colour images. The article describes methods of determining colour difference as recommended by CIE for the CIELAB system, presents mathematical formulation of the system and its modifications, describes the programme developed for calculating colour difference for each described method, and describes testing of this programme using 14 sample colours from the Munsell Book of Colour. Three groups of red, green and blue filters with 7 filters in each were selected as the study object. The filters were selected based on possibility of their further application for determining colour shift by digital devices. Filter colour difference was studied in the groups with different standard sources of light and using three methods of calculation of this difference. Analysis of the obtained results is presented and conclusions are made on possibility to apply each method in different industrial spheres. The article may be useful for colour analysis specialists, quality inspectors and specialists in digital devices and computer vision.

scholarly journals Development of phonetic competence of students mastering a second foreign language

2021 ◽  
pp. 238-246
Author(s):  
O. Yu. Tupytsya ◽  
◽  
L. V. Zimakova ◽  
◽  
Keyword(s):  
Comparative Analysis ◽  
Foreign Language ◽  
Main Aspect ◽  
Emotional Factor ◽  
Speech Activity ◽  
Initial Stage ◽  
Communication Situations ◽  
The Difference ◽  
Active Training ◽  
Selection Of

The article analyses peculiarities of the development of phonetic competence of students majoring in “Philology” who begin to learn a second foreign language (German). Phonetic competence is the ability to correctly articulate, intonate the utterances and comprehend the speech of others. According to the authors, phonetic competence is based on the skills laid at the initial stage of learning a second foreign language. Phonetic competence is an important component of all types of speech skills and therefore, it develops comprehensively in speech activity. The authors are convinced that the study of phonetics is not possible without the practical mastery of lexical and grammatical constructions of a foreign language. The author’s methods of development of phonetic competence of philology students are based on the following principles: 1) comparative analysis of phonetic phenomena in different languages; 2) taking into account the difference between spelling and pronunciation; 3) development of phonemic hearing; 4) active training; 5) the use of emotional means. The task of a teacher is to create an emotional factor (game techniques, models of communication situations, selection of speech patterns), a communicative environment, motivation and interest. The “German pronunciation games” selected by the authors are aimed at creating a “German accent” for students. Thus, practice proves that the principle of approximation, which is applied at the initial stage of learning a foreign language, is inappropriate for students learning German as a second foreign language. Communicative orientation is the main aspect of planning a second foreign language lesson for philology students. It is determined that successfully organized initial stage of the development of phonetic competence is very effective for further mastering a practical course of a second foreign language.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

scholarly journals Age-dependency in mortality of Finnish family caregivers: a nationwide register-based study

2020 ◽  
Vol 30 (Supplement_5) ◽  
Author(s):  
T M Mikkola ◽  
H Kautiainen ◽  
M Mänty ◽  
M B von Bonsdorff ◽  
T Kröger ◽  
...  
Keyword(s):  
General Population ◽  
Family Caregivers ◽  
Family Caregiver ◽  
Causes Of Death ◽  
Lower Mortality ◽  
All Cause Mortality ◽  
The Difference ◽  
Caregiver Role ◽  
Selection Of

Abstract Purpose Mortality appears to be lower in family caregivers than in the general population. However, there is lack of knowledge whether the difference in mortality between family caregivers and the general population is dependent on age. The purpose of this study was to analyze all-cause mortality in relation to age in family caregivers and to study their cause-specific mortality using data from multiple Finnish national registers. Methods The data included all individuals, who received family caregiver's allowance in Finland in 2012 (n = 42 256, mean age 67 years, 71% women) and a control population matched for age, sex, and municipality of residence (n = 83 618). Information on dates and causes of death between 2012 and 2017 were obtained from the Finnish Causes of Death Register. Flexible parametric survival modeling and competing risk regression adjusted for socioeconomic status were used. Results The total follow-up time was 717 877 person-years. Family caregivers had lower all-cause mortality than the controls over the follow-up (8.1% vs. 11.6%) both among women (hazard ratio [HR]: 0.64, 95% CI: 0.61-0.68) and men (HR: 0.73, 95% CI: 0.70-0.77). Younger adult caregivers had equal or only slightly lower mortality than their controls, but after age 60, the difference increased markedly resulting in over 10% lower mortality in favor of the caregivers in the oldest age groups. Caregivers had lower mortality for all the causes of death studied, namely cardiovascular, cancer, neurological, external, respiratory, gastrointestinal and dementia than the controls. Of these, the lowest was the risk for dementia (subhazard ratio=0.29, 95%CI: 0.25-0.34). Conclusions Older family caregivers have lower mortality than the age-matched controls from the general population while younger caregivers have similar mortality to their peers. This age-dependent advantage in mortality is likely to reflect selection of healthier individuals into the family caregiver role. Key messages The difference in mortality between family caregivers and the age-matched general population varies considerably with age. Advantage in mortality observed in family caregiver studies is likely to reflect the selection of healthier individuals into the caregiver role, which underestimates the adverse effects of caregiving.

scholarly journals A microfluidic device enabling drug resistance analysis of leukemia cells via coupled dielectrophoretic detection and impedimetric counting

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yağmur Demircan Yalçın ◽  
Taylan Berkin Töral ◽  
Sertan Sukas ◽  
Ender Yıldırım ◽  
Özge Zorlu ◽  
...  
Keyword(s):  
Drug Resistance ◽  
K562 Cells ◽  
Leukemia Cells ◽  
Drug Resistant ◽  
Wild Type ◽  
Gene Expressions ◽  
Before And After ◽  
The Difference ◽  
Selection Of ◽  
Resistant Cells

AbstractWe report the development of a lab-on-a-chip system, that facilitates coupled dielectrophoretic detection (DEP-D) and impedimetric counting (IM-C), for investigating drug resistance in K562 and CCRF-CEM leukemia cells without (immuno) labeling. Two IM-C units were placed upstream and downstream of the DEP-D unit for enumeration, respectively, before and after the cells were treated in DEP-D unit, where the difference in cell count gave the total number of trapped cells based on their DEP characteristics. Conductivity of the running buffer was matched the conductivity of cytoplasm of wild type K562 and CCRF-CEM cells. Results showed that DEP responses of drug resistant and wild type K562 cells were statistically discriminative (at p = 0.05 level) at 200 mS/m buffer conductivity and at 8.6 MHz working frequency of DEP-D unit. For CCRF-CEM cells, conductivity and frequency values were 160 mS/m and 6.2 MHz, respectively. Our approach enabled discrimination of resistant cells in a group by setting up a threshold provided by the conductivity of running buffer. Subsequent selection of drug resistant cells can be applied to investigate variations in gene expressions and occurrence of mutations related to drug resistance.

scholarly journals Exploring the Limits of Floating-Point Resolution for Hardware-In-the-Loop Implemented with FPGAs

Electronics ◽  
2018 ◽  
Vol 7 (10) ◽  
pp. 219 ◽  
Author(s):  
Alberto Sanchez ◽  
Elías Todorovich ◽  
Angel de Castro
Keyword(s):  
The State ◽  
Floating Point ◽  
Hardware In The Loop ◽  
State Variables ◽  
Numerical Resolution ◽  
Digital Devices ◽  
State Variable ◽  
Simulation Step ◽  
Field Programmable ◽  
The Difference

As the performance of digital devices is improving, Hardware-In-the-Loop (HIL) techniques are being increasingly used. HIL systems are frequently implemented using FPGAs (Field Programmable Gate Array) as they allow faster calculations and therefore smaller simulation steps. As the simulation step is reduced, the incremental values for the state variables are reduced proportionally, increasing the difference between the current value of the state variable and its increments. This difference can lead to numerical resolution issues when both magnitudes cannot be stored simultaneously in the state variable. FPGA-based HIL systems generally use 32-bit floating-point due to hardware and timing restrictions but they may suffer from these resolution problems. This paper explores the limits of 32-bit floating-point arithmetics in the context of hardware-in-the-loop systems, and how a larger format can be used to avoid resolution problems. The consequences in terms of hardware resources and running frequency are also explored. Although the conclusions reached in this work can be applied to any digital device, they can be directly used in the field of FPGAs, where the designer can easily use custom floating-point arithmetics.

scholarly journals Weightage Effect during Back-Calculation of Rock-Mass Quality from the Installed Tunnel Support in Rock-Mass Rating and Tunneling Quality Index System

2019 ◽  
Vol 9 (10) ◽  
pp. 2065 ◽  
Author(s):  
Jonguk Kim ◽  
Hafeezur Rehman ◽  
Wahid Ali ◽  
Abdul Muntaqim Naji ◽  
Hankyu Yoo
Keyword(s):  
Rock Mass ◽  
Quality Index ◽  
Rock Bolt ◽  
Rock Mass Rating ◽  
Rock Mass Quality ◽  
Back Calculation ◽  
The Difference ◽  
Bolt Spacing ◽  
Q System ◽  
Selection Of

In extensively used empirical rock-mass classification systems, the rock-mass rating (RMR) and tunneling quality index (Q) system, rock-mass quality, and tunnel span are used for the selection of rock bolt length and spacing and shotcrete thickness. In both systems, the rock bolt spacing and shotcrete thickness selection are based on the same principle, which is used for the back-calculation of the rock-mass quality. For back-calculation, there is no criterion for the selection of rock-bolt-spacing-based rock-mass quality weightage and shotcrete thickness along with tunnel-span-based rock-mass quality weightage. To determine this weightage effect during the back-calculation, five weightage cases are selected, explained through example, and applied using published data. In the RMR system, the weightage effect is expressed in terms of the difference between the calculated and back-calculated rock-mass quality in the two versions of RMR. In the Q system, the weightage effect is presented in plots of stress reduction factor versus relative block size. The results show that the weightage effect during back-calculation not only depends on the difference in rock-bolt-spacing-based rock-mass quality and shotcrete along with tunnel-span-based rock-mass quality, but also on their corresponding values.

scholarly journals Streptozotocin and Alloxan-based Selection Improves Toxin Resistance of Insulin-Producing RINm Cells

2000 ◽  
Vol 1 (3) ◽  
pp. 211-219 ◽  
Author(s):  
Konstantin O. Bloch ◽  
Romy Zemel ◽  
Olga V. Bloch ◽  
Hagar Grief ◽  
Pnina Vardi
Keyword(s):  
Thymidine Incorporation ◽  
Colorimetric Method ◽  
Hormone Production ◽  
Partial Protection ◽  
Toxin Resistance ◽  
Cell Defense ◽  
Thymidine Incorporation Assay ◽  
Incorporation Assay ◽  
Al Treatment ◽  
Selection Of

The aim of our study was to develop a method for selection of subpopulations of insulin producing RINm cells with higher resistance to beta cell toxins. Cells, resistant to streptozotocin (RINmS) and alloxan (RINmA), were obtained by repeated exposure of parental RINm cells to these two toxins, while the defense capacity, was estimated by the MTT colorimetric method, and[H3]-thymidine incorporation assay. We found that RINmS and RINmA displayed higher resistance to both streptozotocin (STZ) and alloxan (AL) when compared to the parental RINm cells. In contrast, no differences in sensitivity to hydrogen peroxide were found between toxin selected and parental cells. Partial protection from the toxic effect of STZ and AL was obtained only in the parental RINm cells after preincubation of cells with the unmetabolizable 3- O-methyl-glucose. The possibility that GLUT-2 is involved in cell sensitivity to toxins was confirmed by Western blot analysis, which showed higher expression of GLUT-2 in parental RINm compared to RINmS and RINmA cells. In addition to the higher cell defense property evidenced in the selected cells, we also found higher insulin content and insulin secretion in both RINmS and RINmA cells when compared to the parental RINm cells. In conclusion, STZ and AL treatment can be used for selection of cell sub-populations with higher cell defense properties and hormone production. The different GLUT-2 expression in parental and re sistant cells suggest involvement of GLUT-2 in mechanisms of cell response to different toxins.

scholarly journals Three Social Classroom Applications to Improve Student Attitudes

2014 ◽  
Vol 2014 ◽  
pp. 1-14 ◽  
Author(s):  
Alf Inge Wang ◽  
Aleksander Aanesl. Elvemo ◽  
Vegard Gamnes
Keyword(s):  
Social Interaction ◽  
Software Architecture ◽  
Student Attitudes ◽  
Activity Level ◽  
Difficulty Level ◽  
Technical Quality ◽  
Digital Devices ◽  
Highly Sensitive ◽  
The Difference

The paper presents results of a quasiexperiment where the three social classroom applications Post-It, WordCloud, and Categorizer were used in software architecture lectures. Post-It and WordCloud are applications that allow students to brainstorm or give comments related to a given topic. Categorizer is a puzzle game where the students are asked to place a number of terms in one of two correct categories. The three applications are multimodal HTML5 applications that enable students to interact in a classroom using their own digital devices, and the teacher’s laptop is used to display progress and results on the large screen. The focus of this study was to evaluate how the difference of these applications and how their integration into the lecture affected the students’ motivation, engagement, thinking, activity level, social interaction, creativity, enjoyment, attention, and learning. In addition, the study evaluated the usability and the technical quality of the applications. The results of the experiment show that the way such applications are integrated into a lecture highly affects the students’ attitude. The experiment also showed that the game-based application was on average better received among the students and that the students’ attitude was highly sensitive to the difficulty level of the game.

scholarly journals Synergetic Use of Sentinel-1 and Sentinel-2 Data for Soil Moisture Mapping at Plot Scale

2018 ◽  
Vol 10 (8) ◽  
pp. 1285 ◽  
Author(s):  
Reza Attarzadeh ◽  
Jalal Amini ◽  
Claudia Notarnicola ◽  
Felix Greifeneder
Keyword(s):  
Soil Moisture ◽  
Optical Data ◽  
Estimation Accuracy ◽  
Support Vector ◽  
Practical Applications ◽  
Initial Stage ◽  
Object Based ◽  
Single Polarization ◽  
Selection Of

This paper presents an approach for retrieval of soil moisture content (SMC) by coupling single polarization C-band synthetic aperture radar (SAR) and optical data at the plot scale in vegetated areas. The study was carried out at five different sites with dominant vegetation cover located in Kenya. In the initial stage of the process, different features are extracted from single polarization mode (VV polarization) SAR and optical data. Subsequently, proper selection of the relevant features is conducted on the extracted features. An advanced state-of-the-art machine learning regression approach, the support vector regression (SVR) technique, is used to retrieve soil moisture. This paper takes a new look at soil moisture retrieval in vegetated areas considering the needs of practical applications. In this context, we tried to work at the object level instead of the pixel level. Accordingly, a group of pixels (an image object) represents the reality of the land cover at the plot scale. Three approaches, a pixel-based approach, an object-based approach, and a combination of pixel- and object-based approaches, were used to estimate soil moisture. The results show that the combined approach outperforms the other approaches in terms of estimation accuracy (4.94% and 0.89 compared to 6.41% and 0.62 in terms of root mean square error (RMSE) and R2), flexibility on retrieving the level of soil moisture, and better quality of visual representation of the SMC map.

Sign in / Sign up

Export Citation Format

Share Document