scholarly journals Thermal Inactivation of Butyrylcholinesterase in Starch and Gelatin Gels

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 492
Author(s):  
Victoria I. Lonshakova-Mukina ◽  
Elena N. Esimbekova ◽  
Valentina A. Kratasyuk
Keyword(s):  
Thermal Inactivation ◽  
Elevated Temperatures ◽  
Activation Enthalpy ◽  
Activation Parameters ◽  
Simple Approach ◽  
Activation Entropy ◽  
Natural Polymers ◽  
Gelatin Gels ◽  
Starch Gel ◽  
Thermal Stability Of

The present study demonstrates a simple approach to enhancing thermal stability of butyrylcholinesterase (BChE) by using natural polymers. Analysis of thermal inactivation of the tetrameric BChE in starch and gelatin gels at 50–64 °C showed that thermal inactivation followed second-order kinetics and involved two alternating processes of BChE inactivation, which occurred at different rates (fast and slow processes). The activation enthalpy ΔH# and the activation entropy ΔS# for BChE in starch and gelatin gels were evaluated. The values of ΔH# for the fast and the slow thermal inactivation of BChE in starch gel were 61 ± 3, and 22 ± 2 kcal/mol, respectively, and the values of ΔS# were 136 ± 12 and −2.03 ± 0.05 cal∙K−1∙mol−1, respectively. Likewise, the values of ΔH# for BChE in gelatin gel were 58 ± 6 and 109 ± 11 kcal/mol, and the values of ΔS# were 149 ± 16 and 262 ± 21 cal∙K−1∙mol−1, respectively. The values of the activation parameters obtained in this study suggest that starch gel produced a stronger stabilizing effect on BChE exposed to elevated temperatures over long periods compared with gelatin gel.

scholarly journals Thermal inactivation studies of normal and variant human erythrocyte carbonic anhydrases by using a sulphonamide-binding assay

1974 ◽  
Vol 141 (1) ◽  
pp. 219-225 ◽  
Author(s):  
William R. A. Osborne ◽  
Richard E. Tashian
Keyword(s):  
Thermal Inactivation ◽  
Activation Parameters ◽  
Energy Of Activation ◽  
Heat Inactivation ◽  
Activation Entropy ◽  
Carbonic Anhydrases ◽  
Compensating Variation ◽  
Arrhenius Plots ◽  
Heat Stable ◽  
Free Energy Of Activation

Heat-inactivation studies were carried out on the two primary erythrocyte carbonic anhydrase isoenzymes, CA I and CA II, and the secondary isoenzyme of CA I, CA I (+1). In addition, two genetic variants of human isoenzyme CA I, CA Id Michigan (100 Thr→Lys) and CA If London (102 Glu→Lys), and one variant of isoenzyme CA II, CA IIh (251 Asn→Asp), were similarly analysed. The first-order rate constants and Arrhenius plots for these six enzyme forms showed that (1) isoenzyme CA II is more heat-stable than CA I, (2) isoenzyme CA I (+1) is less heat-stable than CA I, (3) the variants CA IIh and CA If London are less heat-stable than the normal enzymes, and (4) isoenzyme CA Id Michigan is more heat-stable than normal CA I. From the values of the slopes of the Arrhenius plots, the energy of activation (Ea) for each isoenzyme and isoenzyme variant was determined, and the following thermodynamic activation parameters were calculated at 55°C: the free energy of activation (ΔG‡), the activation enthalpy (ΔH‡) and the activation entropy (ΔS‡). The ΔG‡ for the enzymes shows a relative constancy with compensating variation in ΔH‡ and ΔS‡. When the values for ΔH‡ are plotted against ΔS‡, an increase in ΔH‡ involves a concomitant increase in ΔS‡.

scholarly journals Vaccine Quality Is a Key Factor to Determine Thermal Stability of Commercial Newcastle Disease (ND)Vaccines

Vaccines ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 363
Author(s):  
Nabila Osman ◽  
Danny Goovaerts ◽  
Serageldeen Sultan ◽  
Jeremy Salt ◽  
Christian Grund
Keyword(s):  
Thermal Stability ◽  
Newcastle Disease ◽  
Thermal Inactivation ◽  
Elevated Temperatures ◽  
Cold Chain ◽  
Climate Conditions ◽  
Vaccine Preparation ◽  
Virus Dose ◽  
Specific Factors ◽  
Thermal Stability Of

Vaccination against Newcastle disease (ND), a devastating viral disease of chickens, is often hampered by thermal inactivation of the live vaccines, in particular in tropical and hot climate conditions. In the past, “thermostable” vaccine strains (I-2) were proposed to overcome this problem but previous comparative studies did not include formulation-specific factors of commercial vaccines. In the current study, we aimed to verify the superior thermal stability of commercially formulated I-2 strains by comparing six commercially available ND vaccines. Subjected to 37 °C as lyophilized preparations, two vaccines containing I-2 strains were more sensitive to inactivation than a third I-2 vaccine or compared to three other vaccines based on different ND strains. However, reconstitution strains proved to have a comparable tenacity. Interestingly, all vaccines still retained a sufficient virus dose for protection (106 EID50) after 1 day at 37 °C. These results suggest that there are specific factors that influence thermal stability beyond the strain-specific characteristics. Exposing ND vaccines to elevated temperatures of 51 and 61 °C demonstrated that inactivation of all dissolved vaccines including I-2 vaccine strains occurred within 2 to 4 h. The results revealed important differences among the vaccines and emphasize the importance of the quality of a certain vaccine preparation rather than the strain it contains. These data highlight that regardless of the ND strain used for vaccine preparation, the appropriate cold chain is mandatory for keeping live ND vaccines efficiency in hot climates.

scholarly journals Vaccine Quality is a Key Factor to Determine Thermal Stability of Commercial Newcastle Disease (ND) Vaccines

2021 ◽  
Author(s):  
Nabila Osman ◽  
Danny Goovaerts ◽  
Sultan Serageldeen ◽  
Christian Grund
Keyword(s):  
Thermal Stability ◽  
Newcastle Disease ◽  
Thermal Inactivation ◽  
Elevated Temperatures ◽  
Viral Disease ◽  
Cold Chain ◽  
Climate Conditions ◽  
Virus Dose ◽  
Different Strains ◽  
Thermal Stability Of

Vaccination against Newcastle disease (ND), a devastating viral disease of chicken, is often hampered by thermal inactivation of the live vaccines, in particular in tropical and hot climate conditions. In the past “thermostable” vaccine strains (I-2) have been proposed to overcome this problem. In the current study, we compared the thermal stability of 6 commercially available ND vaccines. Subjected to 37°C as lyophilized preparation, two vaccines containing I-2 strains were more sensitive to inactivation than a third I-2 vaccine or when compared to three other vaccines based on different strains. However, after reconstitution strains proved to have a comparable tenacity. Interestingly, all vaccines retained a sufficient virus dose for protection (106 EID50) after 1 day at 37°C, still. However, experiments exposing ND-vaccines to elevated temperatures of 51°C and 61°C, clearly demonstrated inactivation of all dissolved vaccines within 2 to 4 hours. The data indicate preparation that specific factors may influence thermal stability rather than strain specific characteristics. Regardless of the ND strain used, the appropriate cold chain is mandatory for live ND-vaccines.

scholarly journals Thermal stability and diffusion characteristics of ultrathin amorphous carbon films grown on crystalline and nitrogenated silicon substrates by filtered cathodic vacuum arc deposition

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shengxi Wang ◽  
Anurag Roy ◽  
Kyriakos Komvopoulos
Keyword(s):  
Thermal Stability ◽  
Amorphous Carbon ◽  
Silicon Substrate ◽  
Elevated Temperatures ◽  
Carbon Films ◽  
Vacuum Arc ◽  
Cross Sectional ◽  
Prolonged Heating ◽  
Filtered Cathodic Vacuum Arc ◽  
Thermal Stability Of

AbstractAmorphous carbon (a-C) films are widely used as protective overcoats in many technology sectors, principally due to their excellent thermophysical properties and chemical inertness. The growth and thermal stability of sub-5-nm-thick a-C films synthesized by filtered cathodic vacuum arc on pure (crystalline) and nitrogenated (amorphous) silicon substrate surfaces were investigated in this study. Samples of a-C/Si and a-C/SiNx/Si stacks were thermally annealed for various durations and subsequently characterized by high-resolution transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). The TEM images confirmed the continuity and uniformity of the a-C films and the 5-nm-thick SiNx underlayer formed by silicon nitrogenation using radio-frequency sputtering. The EELS analysis of cross-sectional samples revealed the thermal stability of the a-C films and the efficacy of the SiNx underlayer to prevent carbon migration into the silicon substrate, even after prolonged heating. The obtained results provide insight into the important attributes of an underlayer in heated multilayered media for preventing elemental intermixing with the substrate, while preserving the structural stability of the a-C film at the stack surface. An important contribution of this investigation is the establishment of an experimental framework for accurately assessing the thermal stability and elemental diffusion in layered microstructures exposed to elevated temperatures.

scholarly journals Mechanical and thermal stability of retained austenite in plastically deformed bainite-based TRIP-aided medium-Mn steels

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
Aleksandra Kozłowska ◽  
Adam Grajcar ◽  
Aleksandra Janik ◽  
Krzysztof Radwański ◽  
Ulrich Krupp ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Retained Austenite ◽  
Elevated Temperatures ◽  
Mechanical Performance ◽  
Mechanical Stability ◽  
Electron Backscatter Diffraction ◽  
Cost Effective ◽  
Tensile Tests ◽  
Thermal Stability Of

AbstractAdvanced medium-Mn sheet steels show an opportunity for the development of cost-effective and light-weight automotive parts with improved safety and optimized environmental performance. These steels utilize the strain-induced martensitic transformation of metastable retained austenite to improve the strength–ductility balance. The improvement of mechanical performance is related to the tailored thermal and mechanical stabilities of retained austenite. The mechanical stability of retained austenite was estimated in static tensile tests over a wide temperature range from 20 °C to 200 °C. The thermal stability of retained austenite during heating at elevated temperatures was assessed by means of dilatometry. The phase composition and microstructure evolution were investigated by means of scanning electron microscopy, electron backscatter diffraction, X-ray diffraction and transmission electron microscopy techniques. It was shown that the retained austenite stability shows a pronounced temperature dependence and is also stimulated by the manganese addition in a 3–5% range.

Thermal Breakdown Kinetics of 1-Ethyl-3-Methylimidazolium Ethylsulfate Measured Using Quantitative Infrared Spectroscopy

2017 ◽  
Vol 71 (12) ◽  
pp. 2626-2631 ◽  
Author(s):  
Jeffrey L. Wheeler ◽  
McKinley Pugh ◽  
S. Jake Atkins ◽  
Jason M. Porter
Keyword(s):  
Thermal Stability ◽  
Room Temperature ◽  
Computational Models ◽  
Elevated Temperatures ◽  
Molar Absorptivity ◽  
Ir Absorption ◽  
Optical Cell ◽  
Multiple Samples ◽  
Kinetics Of ◽  
Thermal Stability Of

In this work, the thermal stability of the room temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM][EtSO4]) is investigated using infrared (IR) spectroscopy. Quantitative IR absorption spectral data are measured for heated [EMIM][EtSO4]. Spectra have been collected between 25 ℃ and 100 ℃ using a heated optical cell. Multiple samples and cell pathlengths are used to determine quantitative values for the molar absorptivity of [EMIM][EtSO4]. These results are compared to previous computational models of the ion pair. These quantitative spectra are used to measure the rate of thermal decomposition of [EMIM][EtSO4] at elevated temperatures. The spectroscopic measurements of the rate of decomposition show that thermogravimetric methods overestimate the thermal stability of [EMIM][EtSO4].

scholarly journals Thermal Stability of Residual Stresses in Differently Deep Rolled Surface Layers of Steel SAE 1045

2021 ◽  
Author(s):  
Stephanie Saalfeld ◽  
Thomas Wegener ◽  
Berthold Scholtes ◽  
Thomas Niendorf
Keyword(s):  
Thermal Stability ◽  
Elevated Temperature ◽  
Residual Stresses ◽  
Elevated Temperatures ◽  
Fatigue Behavior ◽  
Decisive Role ◽  
Deep Rolling ◽  
Material Conditions ◽  
The Stability ◽  
Thermal Stability Of

AbstractThe stability of compressive residual stresses generated by deep rolling plays a decisive role on the fatigue behavior of specimens and components, respectively. In this regard, deep rolling at elevated temperature has proven to be very effective in stabilizing residual stresses when fatigue analysis is conducted at ambient temperature. However, since residual stresses can be affected not only by plastic deformation but also when thermal energy is provided, it is necessary to analyze the influence of temperature and time on the relaxation behavior of residual stresses at elevated temperature. To evaluate the effect of deep rolling at elevated temperatures on stability limits under thermal as well as combined thermo-mechanical loads, the present work introduces and discusses the results of investigations on the thermal stability of residual stresses in differently deep rolled material conditions of the steel SAE 1045.

A Mechanism of Polycrystallization in Fully Lamellar Ti-48Al-8Nb Single Crystal Alloy Aged at Elevated Temperatures

2002 ◽  
Vol 753 ◽  
Author(s):  
Yukinori Yamamoto ◽  
Masao Takeyama ◽  
Takashi Matsuo
Keyword(s):  
Growth Rate ◽  
Diffusion Coefficient ◽  
Single Crystal ◽  
Grain Growth ◽  
Elevated Temperatures ◽  
Volume Diffusion ◽  
Activation Enthalpy ◽  
Lamellar Microstructure ◽  
Aged Sample ◽  
Fully Lamellar

ABSTRACTPolycrystallization mechanism of a fully lamellar microstructure during aging at 1473 and 1273 K has been examined using Ti-48Al-8Nb fully lamellar single crystal, which consists mostly of γ/γ interfaces (variant, perfect-twin and pseudo-twin boundaries). After a certain period of aging, a few γ grains are formed within the lamellae and the lamellar microstructure collapses rapidly to become a γ grained microstructure at both temperatures. An EBSP analysis for aged sample revealed that most of the grains follow the orientation of variant domains in the lamellar microstructure. A kinetic analysis of the grain growth during aging revealed that the activation enthalpy of the growth rate is estimated to be 390 kJ/mol, which is very close to that for volume diffusion coefficient of Al and Nb in γ-TiAl. Based on the results, it is concluded that the formation of the grains is attributed to coarsening of variant domains within the lamellar plates and coalescence of the same variant domains across the lamellae, leading to a γ grained microstructure following the orientation of variant domains. These reactions also make the number of the variant domains decrease during aging, which remains only two variant domains with perfect-twin relationship.

Thermal Stability of Ni40Ti40Nb20 and Ni32Ti48Nb20 Tapes Obtained by Rapid Solidification Technique

2012 ◽  
Vol 188 ◽  
pp. 41-45
Author(s):  
György Thalmaier ◽  
Ioan Vida-Simiti ◽  
N. Jumate ◽  
Viorel Aurel Şerban ◽  
C. Codrean ◽  
...  
Keyword(s):  
Thermal Stability ◽  
High Purity ◽  
Elevated Temperatures ◽  
Graphite Crucible ◽  
Argon Atmosphere ◽  
Membrane Reactors ◽  
Master Alloys ◽  
Selective Membrane ◽  
Dta Analysis ◽  
Thermal Stability Of

Nickel–titanium- group 5A metal (V, Nb, Ta, Zr) alloys are known as promising hydrogen-selective membrane materials. They can potentially be used in membrane reactors, which can produce high-purity H2 and CO2 streams from coal-derived syngas at elevated temperatures. The master alloys were prepared by arc melting using high purity metals in a Ti-gettered argon atmosphere. The alloys were melted several times in order to improve homogeneity. The ingots were induction-melted under a high-purity argon atmosphere in a quartz tube and graphite crucible injected through a nozzle onto a Cu wheel to produce rapidly solidified amorphous ribbons. Thermal stability of the Ni40Ti40Nb20 and Ni32Ti48Nb20 thin tapes has been examined using DTA analysis.

Sign in / Sign up

Export Citation Format

Share Document