scholarly journals One-Dimensional Nanomaterials in Resistive Gas Sensor: From Material Design to Application

Chemosensors ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 198
Author(s):  
Ze Wang ◽  
Lei Zhu ◽  
Shiyi Sun ◽  
Jianan Wang ◽  
Wei Yan
Keyword(s):  
Gas Sensors ◽  
Active Sites ◽  
High Performance ◽  
Material Design ◽  
Response Speed ◽  
One Dimensional ◽  
Design And Optimization ◽  
Surface Areas ◽  
Safety And Health ◽  
Resistive Gas Sensors

With a series of widespread applications, resistive gas sensors are considered to be promising candidates for gas detection, benefiting from their small size, ease-of-fabrication, low power consumption and outstanding maintenance properties. One-dimensional (1-D) nanomaterials, which have large specific surface areas, abundant exposed active sites and high length-to-diameter ratios, enable fast charge transfers and gas-sensitive reactions. They can also significantly enhance the sensitivity and response speed of resistive gas sensors. The features and sensing mechanism of current resistive gas sensors and the potential advantages of 1-D nanomaterials in resistive gas sensors are firstly reviewed. This review systematically summarizes the design and optimization strategies of 1-D nanomaterials for high-performance resistive gas sensors, including doping, heterostructures and composites. Based on the monitoring requirements of various characteristic gases, the available applications of this type of gas sensors are also classified and reviewed in the three categories of environment, safety and health. The direction and priorities for the future development of resistive gas sensors are laid out.

UV-enhanced NO2 gas sensors based on In2O3/ZnO composite material modified by polypeptides

2021 ◽  
Author(s):  
Zhihua Ying ◽  
Teng Zhang ◽  
Chao Feng ◽  
Fei Wen ◽  
Lili Li ◽  
...  
Keyword(s):  
Composite Material ◽  
Gas Sensor ◽  
Gas Sensors ◽  
Active Sites ◽  
High Performance ◽  
Gas Sensing ◽  
Uv Light ◽  
Gas Concentration ◽  
One Step ◽  
Strong Linear Relationship

Abstract This present study reported a high-performance gas sensor, based on In2O3/ZnO composite material modified by polypeptides, with a high sensibility to NO2, where the In2O3/ZnO composite was prepared by a one-step hydrothermal method. A series of results through material characterization technologies showed the addition of polypeptides can effectively change the morphology and size of In2O3/ZnO crystals, and effectively improve the sensing performance of the gas sensors. Due to the single shape and small size, In2O3/ZnO composite modified by polypeptides increased the active sites on the surface. At the same time, the gas sensing properties of four different ratios of polypeptide-modified In2O3/ZnO gas sensors were tested. It was found that the In2O3/ZnO-10 material showed the highest response, excellent selectivity, and good stability at room temperature under UV light. In addition, the response of the In2O3/ZnO-10 gas sensor showed a strong linear relationship with the NO2 gas concentration. When the NO2 gas concentration was 20 ppm, the response time was as quick as 19s, and the recovery time was 57s. Finally, based on the obtained experimental characterization results and energy band structure analysis, a possible gas sensing mechanism is proposed.

scholarly journals Gas Sensors Based on Oxide Semiconductors with Porous Nanostructures

Proceedings ◽  
2019 ◽  
Vol 14 (1) ◽  
pp. 13
Author(s):  
Peng Sun
Keyword(s):  
Gas Sensors ◽  
High Performance ◽  
Gas Sensing ◽  
Synergistic Effects ◽  
Response Speed ◽  
High Specific Surface Area ◽  
Oxide Semiconductor ◽  
Oxide Semiconductors ◽  
Sensing Properties ◽  
Porous Nanostructures

Gas sensor as a device composed of sensing material coupled with signal transducer, has been acknowledged as an analytical tool for detection and quantification of inflammable, explosive or toxic gases. The gas sensors based on nanostructured oxide semiconductor endowed with excellent sensing properties have exhibited great potential application in the fields of environmental monitoring, resource exploration, medical welfare, etc. It is well known that the sensing mechanism of sensor employing oxide semiconductors is mainly that the interactions between the surface adsorbed oxygen species and target gases lead to a change in the electrical conductivity. Therefore, the gas sensing properties of oxide semiconductors are closely related with their composition, crystalline size, and microstructure. In this regard, design and preparation of oxides with novel architectures will be increasingly important in the construction of high performance gas sensors. Due to high specific surface area, low density, and good surface permeability, porous nanostructures oxide semiconductor sensing materials have attracted growing interest in recent years. In our work, we successfully prepared various porous nanostructures oxides and their composites to the construction of high performances gas sensors with enhanced sensitivity, selectivity, as well as lowered detection limit. The subsequent gas sensing measurements explicitly revealed that these oxides and composites manifested superior sensing behaviors (like much higher sensitivity and faster response speed), which can be ascribed to the porous architectures and the synergistic effects.

Hierarchical Porous Covalent organic framework/graphene aerogel electrode for High-Performance Supercapacitors

2021 ◽  
Author(s):  
Ning An ◽  
Zhen Guo ◽  
Jiao Xin ◽  
Yuan-Yuan He ◽  
Ke-Feng Xie ◽  
...  
Keyword(s):  
Energy Storage ◽  
Active Sites ◽  
High Performance ◽  
Energy Storage Materials ◽  
Covalent Organic Frameworks ◽  
Graphene Aerogel ◽  
Covalent Organic Framework ◽  
Surface Areas ◽  
Redox Active ◽  
Hierarchical Porous

Redox-active covalent organic frameworks (COFs) are an emerging class of energy storage materials due to their notably abundant active sites, well-defined channels and highly surface areas. However, their poor electrical...

scholarly journals Optimization of a Low-Power Chemoresistive Gas Sensor: Predictive Thermal Modelling and Mechanical Failure Analysis

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 783 ◽  
Author(s):  
Andrea Gaiardo ◽  
David Novel ◽  
Elia Scattolo ◽  
Michele Crivellari ◽  
Antonino Picciotto ◽  
...  
Keyword(s):  
Low Power ◽  
Failure Analysis ◽  
Gas Sensors ◽  
High Performance ◽  
Gas Sensing ◽  
Mechanical Failure ◽  
Sensing Applications ◽  
Theoretical Approaches ◽  
Sensing Material ◽  
Silicon Bulk

The substrate plays a key role in chemoresistive gas sensors. It acts as mechanical support for the sensing material, hosts the heating element and, also, aids the sensing material in signal transduction. In recent years, a significant improvement in the substrate production process has been achieved, thanks to the advances in micro- and nanofabrication for micro-electro-mechanical system (MEMS) technologies. In addition, the use of innovative materials and smaller low-power consumption silicon microheaters led to the development of high-performance gas sensors. Various heater layouts were investigated to optimize the temperature distribution on the membrane, and a suspended membrane configuration was exploited to avoid heat loss by conduction through the silicon bulk. However, there is a lack of comprehensive studies focused on predictive models for the optimization of the thermal and mechanical properties of a microheater. In this work, three microheater layouts in three membrane sizes were developed using the microfabrication process. The performance of these devices was evaluated to predict their thermal and mechanical behaviors by using both experimental and theoretical approaches. Finally, a statistical method was employed to cross-correlate the thermal predictive model and the mechanical failure analysis, aiming at microheater design optimization for gas-sensing applications.

Core-shell nanostructured Zn-Co-O@CoS arrays for high-performance hybrid supercapacitors

2021 ◽  
Author(s):  
Yi He ◽  
Lei Xie ◽  
Shixiang Ding ◽  
Yujia Long ◽  
Xinyi Zhou ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Energy Storage ◽  
Active Sites ◽  
High Performance ◽  
Electronic Conductivity ◽  
Wide Distribution ◽  
Energy Storage Materials ◽  
Core Shell ◽  
Storage Materials ◽  
Hybrid Supercapacitors

Although the zinc oxide (ZnO) with wide distribution is one of the most attractive energy storage materials, the low electronic conductivity and insufficient active sites of bulk ZnO increase the...

scholarly journals High performance self-powered photodetector based on 1D Te-2D WS2 mixed-dimensional heterostructure

2021 ◽  
Author(s):  
Lixiang Han ◽  
Mengmeng Yang ◽  
Peiting Wen ◽  
Wei Gao ◽  
nengjie huo ◽  
...  
Keyword(s):  
High Performance ◽  
Van Der Waals ◽  
Sharp Interface ◽  
Two Dimensional ◽  
High Quality ◽  
One Dimensional ◽  
Self Powered

One dimensional (1D)-two dimensional (2D) van der Waals (vdWs) mixed-dimensional heterostructures with advantages of atomically sharp interface, high quality and good compatibility have attracted tremendous attention in recent years. The...

scholarly journals Efficient Catalytic Conversion of Polysulfides by Biomimetic Design of “Branch-Leaf” Electrode for High-Energy Sodium–Sulfur Batteries

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Wenyan Du ◽  
Kangqi Shen ◽  
Yuruo Qi ◽  
Wei Gao ◽  
Mengli Tao ◽  
...  
Keyword(s):  
Active Sites ◽  
High Performance ◽  
Electrochemical Reaction ◽  
Molecular Layer ◽  
Specific Capacity ◽  
High Energy ◽  
Reduction Reaction ◽  
Biomimetic Design ◽  
Co Nanoparticles ◽  
Sodium Sulfur

AbstractRechargeable room temperature sodium–sulfur (RT Na–S) batteries are seriously limited by low sulfur utilization and sluggish electrochemical reaction activity of polysulfide intermediates. Herein, a 3D “branch-leaf” biomimetic design proposed for high performance Na–S batteries, where the leaves constructed from Co nanoparticles on carbon nanofibers (CNF) are fully to expose the active sites of Co. The CNF network acts as conductive “branches” to ensure adequate electron and electrolyte supply for the Co leaves. As an effective electrocatalytic battery system, the 3D “branch-leaf” conductive network with abundant active sites and voids can effectively trap polysulfides and provide plentiful electron/ions pathways for electrochemical reaction. DFT calculation reveals that the Co nanoparticles can induce the formation of a unique Co–S–Na molecular layer on the Co surface, which can enable a fast reduction reaction of the polysulfides. Therefore, the prepared “branch-leaf” CNF-L@Co/S electrode exhibits a high initial specific capacity of 1201 mAh g−1 at 0.1 C and superior rate performance.

scholarly journals N, S and Transition-Metal Co-Doped Graphene Nanocomposites as High-Performance Catalyst for Glucose Oxidation in a Direct Glucose Alkaline Fuel Cell

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 202
Author(s):  
Yexin Dai ◽  
Jie Ding ◽  
Jingyu Li ◽  
Yang Li ◽  
Yanping Zong ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Active Sites ◽  
High Performance ◽  
Glucose Oxidation ◽  
Alkaline Fuel Cell ◽  
Blank Group ◽  
Graphene Nanocomposites ◽  
Doped Graphene ◽  
One Step ◽  
Hydrothermal Approach

In this work, reduced graphene oxide (rGO) nanocomposites doped with nitrogen (N), sulfur (S) and transitional metal (Ni, Co, Fe) were synthesized by using a simple one-step in-situ hydrothermal approach. Electrochemical characterization showed that rGO-NS-Ni was the most prominent catalyst for glucose oxidation. The current density of the direct glucose alkaline fuel cell (DGAFC) with rGO-NS-Ni as the anode catalyst reached 148.0 mA/cm2, which was 40.82% higher than the blank group. The DGAFC exhibited a maximum power density of 48 W/m2, which was more than 2.08 folds than that of blank group. The catalyst was further characterized by SEM, XPS and Raman. It was speculated that the boosted performance was due to the synergistic effect of N, S-doped rGO and the metallic redox couples, (Ni2+/Ni3+, Co2+/Co3+ and Fe2+/Fe3+), which created more active sites and accelerated electron transfer. This research can provide insights for the development of environmental benign catalysts and promote the application of the DGAFCs.

scholarly journals Tuning the hierarchical pore structure of graphene oxide through dual thermal activation for high-performance supercapacitor

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jeongpil Kim ◽  
Jeong-Hyun Eum ◽  
Junhyeok Kang ◽  
Ohchan Kwon ◽  
Hansung Kim ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Pore Structure ◽  
Specific Capacitance ◽  
Surface Area ◽  
Thermal Annealing ◽  
High Performance ◽  
Annealing Process ◽  
Supercapacitor Electrode ◽  
Simple Method ◽  
Surface Areas

AbstractHerein, we introduce a simple method to prepare hierarchical graphene with a tunable pore structure by activating graphene oxide (GO) with a two-step thermal annealing process. First, GO was treated at 600 °C by rapid thermal annealing in air, followed by subsequent thermal annealing in N2. The prepared graphene powder comprised abundant slit nanopores and micropores, showing a large specific surface area of 653.2 m2/g with a microporous surface area of 367.2 m2/g under optimized conditions. The pore structure was easily tunable by controlling the oxidation degree of GO and by the second annealing process. When the graphene powder was used as the supercapacitor electrode, a specific capacitance of 372.1 F/g was achieved at 0.5 A/g in 1 M H2SO4 electrolyte, which is a significantly enhanced value compared to that obtained using activated carbon and commercial reduced GO. The performance of the supercapacitor was highly stable, showing 103.8% retention of specific capacitance after 10,000 cycles at 10 A/g. The influence of pore structure on the supercapacitor performance was systematically investigated by varying the ratio of micro- and external surface areas of graphene.

scholarly journals Enhancing Formaldehyde Selectivity of SnO2 Gas Sensors with the ZSM-5 Modified Layers

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 3947
Author(s):  
Wei Wang ◽  
Qinyi Zhang ◽  
Ruonan Lv ◽  
Dong Wu ◽  
Shunping Zhang
Keyword(s):  
Gas Sensors ◽  
Indoor Air ◽  
High Performance ◽  
Screen Printing ◽  
Gas Sensing ◽  
Oxide Semiconductors ◽  
Screen Printing Method ◽  
Gas Sensing Properties ◽  
Zeolite Films ◽  
Insufficient Knowledge

High performance formaldehyde gas sensors are widely needed for indoor air quality monitoring. A modified layer of zeolite on the surface of metal oxide semiconductors results in selectivity improvement to formaldehyde as gas sensors. However, there is insufficient knowledge on how the thickness of the zeolite layer affects the gas sensing properties. In this paper, ZSM-5 zeolite films were coated on the surface of the SnO2 gas sensors by the screen printing method. The thickness of ZSM-5 zeolite films was controlled by adjusting the numbers of screen printing layers. The influence of ZSM-5 film thickness on the performance of ZSM-5/SnO2 gas sensors was studied. The results showed that the ZSM-5/SnO2 gas sensors with a thickness of 19.5 μm greatly improved the selectivity to formaldehyde, and reduced the response to ethanol, acetone and benzene at 350 °C. The mechanism of the selectivity improvement to formaldehyde of the sensors was discussed.

Sign in / Sign up

Export Citation Format

Share Document