scholarly journals A High-Density Memory Design Based on Self-Aligned Tunneling Window for Large-Capacity Memory Application

Electronics ◽  
2021 ◽  
Vol 10 (16) ◽  
pp. 1954
Author(s):  
Chen Wang ◽  
Xiuli Zhao ◽  
Hao Liu ◽  
Xin Chao ◽  
Hao Zhu ◽  
...  
Keyword(s):  
High Speed ◽  
Complementary Metal Oxide Semiconductor ◽  
Memory Device ◽  
High Density ◽  
Oxide Semiconductor ◽  
Good Reliability ◽  
Semiconductor Memory ◽  
Operation Speed ◽  
Reliability Characteristics ◽  
Memory Applications

Despite the continuous downscaling of complementary metal–oxide–semiconductor (CMOS) devices, various scenarios of technology have also been proposed toward the shrinking of semiconductor memory. In this paper, a high-density memory (HDM) has been proposed on the basis of band-to-band tunneling (BTBT) for low-power, high density, and high-speed memory applications. The geometric structure and electrical properties have been demonstrated by using TCAD tools. Typical memory operations including read, program, and erase have been designed and performed. High operation speed, lower power consumption, as well as good reliability characteristics have been achieved by simulation, which indicates that the HDM may have potential application value as a novel semiconductor memory device.

scholarly journals Investigation of PVT-Aware STT-MRAM Sensing Circuits for Low-VDD Scenario

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 551
Author(s):  
Zhongjian Bian ◽  
Xiaofeng Hong ◽  
Yanan Guo ◽  
Lirida Naviner ◽  
Wei Ge ◽  
...  
Keyword(s):  
Nonvolatile Memory ◽  
High Speed ◽  
Low Voltage ◽  
Supply Voltage ◽  
Random Access ◽  
Magnetic Tunnel Junction ◽  
Complementary Metal Oxide Semiconductor ◽  
Current Mode ◽  
Cmos Technology ◽  
Oxide Semiconductor

Spintronic based embedded magnetic random access memory (eMRAM) is becoming a foundry validated solution for the next-generation nonvolatile memory applications. The hybrid complementary metal-oxide-semiconductor (CMOS)/magnetic tunnel junction (MTJ) integration has been selected as a proper candidate for energy harvesting, area-constraint and energy-efficiency Internet of Things (IoT) systems-on-chips. Multi-VDD (low supply voltage) techniques were adopted to minimize energy dissipation in MRAM, at the cost of reduced writing/sensing speed and margin. Meanwhile, yield can be severely affected due to variations in process parameters. In this work, we conduct a thorough analysis of MRAM sensing margin and yield. We propose a current-mode sensing amplifier (CSA) named 1D high-sensing 1D margin, high 1D speed and 1D stability (HMSS-SA) with reconfigured reference path and pre-charge transistor. Process-voltage-temperature (PVT) aware analysis is performed based on an MTJ compact model and an industrial 28 nm CMOS technology, explicitly considering low-voltage (0.7 V), low tunneling magnetoresistance (TMR) (50%) and high temperature (85 °C) scenario as the worst sensing case. A case study takes a brief look at sensing circuits, which is applied to in-memory bit-wise computing. Simulation results indicate that the proposed high-sensing margin, high speed and stability sensing-sensing amplifier (HMSS-SA) achieves remarkable performance up to 2.5 GHz sensing frequency. At 0.65 V supply voltage, it can achieve 1 GHz operation frequency with only 0.3% failure rate.

scholarly journals Performance Comparison of Carry-Lookahead and Carry-Select Adders Based on Accurate and Approximate Additions

Electronics ◽  
2018 ◽  
Vol 7 (12) ◽  
pp. 369 ◽  
Author(s):  
Padmanabhan Balasubramanian ◽  
Nikos Mastorakis
Keyword(s):  
High Speed ◽  
Digital Signal ◽  
Complementary Metal Oxide Semiconductor ◽  
Performance Comparison ◽  
Oxide Semiconductor ◽  
Cmos Process ◽  
Least Significant Bit ◽  
Design Metrics ◽  
Ripple Carry Adder ◽  
Speed Performance

Addition is a fundamental operation in microprocessing and digital signal processing hardware, which is physically realized using an adder. The carry-lookahead adder (CLA) and the carry-select adder (CSLA) are two popular high-speed, low-power adder architectures. The speed performance of a CLA architecture can be improved by adopting a hybrid CLA architecture which employs a small-size ripple-carry adder (RCA) to replace a sub-CLA in the least significant bit positions. On the other hand, the power dissipation of a CSLA employing full adders and 2:1 multiplexers can be reduced by utilizing binary-to-excess-1 code (BEC) converters. In the literature, the designs of many CLAs and CSLAs were described separately. It would be useful to have a direct comparison of their performances based on the design metrics. Hence, we implemented homogeneous and hybrid CLAs, and CSLAs with and without the BEC converters by considering 32-bit accurate and approximate additions to facilitate a comparison. For the gate-level implementations, we considered a 32/28 nm complementary metal-oxide-semiconductor (CMOS) process targeting a typical-case process–voltage–temperature (PVT) specification. The results show that the hybrid CLA/RCA architecture is preferable among the CLA and CSLA architectures from the speed and power perspectives to perform accurate and approximate additions.

scholarly journals Effects of Process Variations in a HCMOS IC using a Monte Carlo SPICE Simulation

2017 ◽  
pp. 11-16
Author(s):  
Widianto Widianto ◽  
Lailis Syafaah ◽  
Nurhadi Nurhadi
Keyword(s):  
Monte Carlo ◽  
Integrated Circuit ◽  
High Speed ◽  
Evaluation Method ◽  
Complementary Metal Oxide Semiconductor ◽  
Process Variations ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Spice Simulation ◽  
Simulation Results

In this paper, effects of process variations in a HCMOS (High-Speed Complementary Metal Oxide Semiconductor) IC (Integrated Circuit) are examined using a Monte Carlo SPICE (Simulation Program with Integrated Circuit Emphasis) simulation. The variations of the IC are L and VTO variations. An evaluation method is used to evaluate the effects of the variations by modeling it using a normal (Gaussian) distribution. The simulation results show that the IC may be detected as a defective IC caused by the variations based on large supply currents flow to it. 

The Effect of Strain on the Formation of Dislocations at the SiGe/Si Interface

MRS Bulletin ◽  
1996 ◽  
Vol 21 (4) ◽  
pp. 38-44 ◽  
Author(s):  
F.K. LeGoues
Keyword(s):  
Metal Oxide ◽  
High Speed ◽  
High Performance ◽  
Field Effect Transistors ◽  
Low Cost ◽  
Complementary Metal Oxide Semiconductor ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Design Rule ◽  
Strained Si

Recently much interest has been devoted to Si-based heteroepitaxy, and in particular, to the SiGe/Si system. This is mostly for economical reasons: Si-based technology is much more advanced, is widely available, and is cheaper than GaAs-based technology. SiGe opens the door to the exciting (and lucrative) area of Si-based high-performance devices, although optical applications are still limited to GaAs-based technology. Strained SiGe layers form the base of heterojunction bipolar transistors (HBTs), which are currently used in commercial high-speed analogue applications. They promise to be low-cost compared to their GaAs counterparts and give comparable performance in the 2-20-GHz regime. More recently we have started to investigate the use of relaxed SiGe layers, which opens the door to a wider range of application and to the use of SiGe in complementary metal oxide semiconductor (CMOS) devices, which comprise strained Si and SiGe layers. Some recent successes include record-breaking low-temperature electron mobility in modulation-doped layers where the mobility was found to be up to 50 times better than standard Si-based metal-oxide-semiconductor field-effect transistors (MOSFETs). Even more recently, SiGe-basedp-type MOSFETS were built with oscillation frequency of up to 50 GHz, which is a new record, in anyp-type material for the same design rule.

scholarly journals Monolithic optoelectronic integrated broadband optical receiver with graphene photodetectors

Nanophotonics ◽  
2017 ◽  
Vol 6 (6) ◽  
pp. 1343-1352 ◽  
Author(s):  
Chuantong Cheng ◽  
Beiju Huang ◽  
Xurui Mao ◽  
Zanyun Zhang ◽  
Zan Zhang ◽  
...  
Keyword(s):  
Integrated Circuit ◽  
Low Cost ◽  
Three Dimensional ◽  
Complementary Metal Oxide Semiconductor ◽  
Optical Signal ◽  
Optical Interconnect ◽  
Optical Receiver ◽  
Oxide Semiconductor ◽  
Experimental Realization ◽  
Operation Speed

AbstractOptical receivers with potentially high operation bandwidth and low cost have received considerable interest due to rapidly growing data traffic and potential Tb/s optical interconnect requirements. Experimental realization of 65 GHz optical signal detection and 262 GHz intrinsic operation speed reveals the significance role of graphene photodetectors (PDs) in optical interconnect domains. In this work, a novel complementary metal oxide semiconductor post-backend process has been developed for integrating graphene PDs onto silicon integrated circuit chips. A prototype monolithic optoelectronic integrated optical receiver has been successfully demonstrated for the first time. Moreover, this is a firstly reported broadband optical receiver benefiting from natural broadband light absorption features of graphene material. This work is a perfect exhibition of the concept of monolithic optoelectronic integration and will pave way to monolithically integrated graphene optoelectronic devices with silicon ICs for three-dimensional optoelectronic integrated circuit chips.

scholarly journals A 2.6 GS/s 8-Bit Time-Interleaved SAR ADC in 55 nm CMOS Technology

Electronics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 305 ◽  
Author(s):  
Dong Wang ◽  
Xiaoge Zhu ◽  
Xuan Guo ◽  
Jian Luan ◽  
Lei Zhou ◽  
...  
Keyword(s):  
High Speed ◽  
Complementary Metal Oxide Semiconductor ◽  
Cmos Technology ◽  
Sar Adc ◽  
Oxide Semiconductor ◽  
Power Measurement ◽  
Cmos Process ◽  
Analog To Digital ◽  
Full Speed ◽  
Time Interleaved

This paper presents an eight-channel time-interleaved (TI) 2.6 GS/s 8-bit successive approximation register (SAR) analog-to-digital converter (ADC) prototype in a 55-nm complementary metal-oxide-semiconductor (CMOS) process. The channel-selection-embedded bootstrap switch is adopted to perform sampling times synchronization using the full-speed master clock to suppress the time skew between channels. Based on the segmented pre-quantization and bypass switching scheme, double alternate comparators clocked asynchronously with background offset calibration are utilized in sub-channel SAR ADC to achieve high speed and low power. Measurement results show that the signal-to-noise-and-distortion ratio (SNDR) of the ADC is above 38.2 dB up to 500 MHz input frequency and above 31.8 dB across the entire first Nyquist zone. The differential non-linearity (DNL) and integral non-linearity (INL) are +0.93/−0.85 LSB and +0.71/−0.91 LSB, respectively. The ADC consumes 60 mW from a 1.2 V supply, occupies an area of 400 μm × 550 μm, and exhibits a figure-of-merit (FoM) of 348 fJ/conversion-step.

scholarly journals Applicability of independent component analysis on high-density microelectrode array recordings

2012 ◽  
Vol 108 (1) ◽  
pp. 334-348 ◽  
Author(s):  
David Jäckel ◽  
Urs Frey ◽  
Michele Fiscella ◽  
Felix Franke ◽  
Andreas Hierlemann
Keyword(s):  
Microelectrode Array ◽  
Simulated Data ◽  
Complementary Metal Oxide Semiconductor ◽  
Simultaneous Recording ◽  
High Density ◽  
Independent Component ◽  
Oxide Semiconductor ◽  
Spike Sorting ◽  
Spatiotemporal Resolution ◽  
Source Signals

Emerging complementary metal oxide semiconductor (CMOS)-based, high-density microelectrode array (HD-MEA) devices provide high spatial resolution at subcellular level and a large number of readout channels. These devices allow for simultaneous recording of extracellular activity of a large number of neurons with every neuron being detected by multiple electrodes. To analyze the recorded signals, spiking events have to be assigned to individual neurons, a process referred to as “spike sorting.” For a set of observed signals, which constitute a linear mixture of a set of source signals, independent component (IC) analysis (ICA) can be used to demix blindly the data and extract the individual source signals. This technique offers great potential to alleviate the problem of spike sorting in HD-MEA recordings, as it represents an unsupervised method to separate the neuronal sources. The separated sources or ICs then constitute estimates of single-neuron signals, and threshold detection on the ICs yields the sorted spike times. However, it is unknown to what extent extracellular neuronal recordings meet the requirements of ICA. In this paper, we evaluate the applicability of ICA to spike sorting of HD-MEA recordings. The analysis of extracellular neuronal signals, recorded at high spatiotemporal resolution, reveals that the recorded data cannot be modeled as a purely linear mixture. As a consequence, ICA fails to separate completely the neuronal signals and cannot be used as a stand-alone method for spike sorting in HD-MEA recordings. We assessed the demixing performance of ICA using simulated data sets and found that the performance strongly depends on neuronal density and spike amplitude. Furthermore, we show how postprocessing techniques can be used to overcome the most severe limitations of ICA. In combination with these postprocessing techniques, ICA represents a viable method to facilitate rapid spike sorting of multidimensional neuronal recordings.

Sign in / Sign up

Export Citation Format

Share Document