scholarly journals Impact of Process Parameters on the Diameter of Nanobubbles Generated by Electrolysis on Platinum-Coated Titanium Electrodes Using Box–Behnken Experimental Design

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2542
Author(s):  
Karol Ulatowski ◽  
Radosław Jeżak ◽  
Paweł Sobieszuk
Keyword(s):  
Experimental Design ◽  
Process Parameters ◽  
Current Density ◽  
Salt Concentration ◽  
Multivariate Regression ◽  
Electrical Energy ◽  
Multiphase System ◽  
Anova Analysis ◽  
Dependent Variables ◽  
Parameter Function

(1) The generation of nanobubbles by electrolysis is an interesting method of using electrical energy to form bubble nuclei, effectively creating a multiphase system. For every process, the effectiveness of nanobubble generation by electrolysis depends on various process parameters that impact should be determined. (2) In this work, the electrolytic generation of hydrogen and oxygen bubbles was performed in a self-built setup, in which a Nafion membrane separated two chambers. The generation of bubbles of both gases was investigated using Box–Behnken experimental design. Three independent variables were salt concentration, current density, and electrolysis time, while the dependent variables were Sauter diameters of generated bubbles. An ANOVA analysis and multivariate regression were carried out to propose a statistical and power model of nanobubble size as a process parameter function. (3) The generation of bubbles of hydrogen and oxygen by electrolysis showed that different factors or their combinations determine their size. The results presented in this work proved to be complementary to previous works reported in the literature. (4) The Sauter diameter of bubbles increases with salt concentration and stays constant with increasing current density in investigated range. The proposed correlations allow the Sauter diameters of nanobubbles generated during electrolysis to be predicted.

scholarly journals Electrochemical synthesis of biobased polymers and polymer building blocks from vanillin

RSC Advances ◽  
2021 ◽  
Vol 11 (15) ◽  
pp. 8970-8985
Author(s):  
Robin Kunkel ◽  
Volkmar M. Schmidt ◽  
Carsten Cremers ◽  
Dominik Müller ◽  
Detlef Schmiedl ◽  
...  
Keyword(s):  
Process Parameters ◽  
Current Density ◽  
Electrode Material ◽  
Electrochemical Synthesis ◽  
Building Blocks ◽  
Biobased Polymers ◽  
The Impact

Hydrovanilloin and polyvanillin were synthesized electrochemically investigating the impact of process parameters such as electrode material, charge and current density.

Study on Electrodeposition of Ni-Graphite Composite Coatings in Sulfamate Bath

2010 ◽  
Vol 150-151 ◽  
pp. 1546-1550 ◽  
Author(s):  
Xiang Zhu He ◽  
Xiao Wei Zhang ◽  
Xin Li Zhou ◽  
Zhi Hong Fu
Keyword(s):  
Surface Morphology ◽  
Process Parameters ◽  
Current Density ◽  
Graphite Particle ◽  
Particle Concentration ◽  
Composite Coatings ◽  
Nickel Matrix ◽  
Graphite Composite ◽  
Surface Morphologies ◽  
Sulfamate Bath

This paper presented the composite coatings of nickel with graphite particle on the aluminum substrate using a nickel sulfamate bath. Effects of graphite particle concentration on the surface morphologies of the composite coatings were investigated. The inclusion of graphite particle into metal deposits was dependent on many process parameters, including particle concentration, current density, pH and temperature. Results of SEM and XRD demonstrated that graphite particle had successfully deposited on that nickel matrix; besides, the surface morphology of coatings obtained from sulfamate bath containing 2g/L graphite particle dispersed more uniformly than the ones with higher concentration.

scholarly journals Pengaruh Adverse Selection dan Negative Framing pada Kecenderungan Eskalasi Komitmen

2017 ◽  
pp. 1
Author(s):  
Ari Puspa Sari ◽  
Gede Wira Kusuma
Keyword(s):  
Experimental Design ◽  
Factorial Design ◽  
Adverse Selection ◽  
Investment Project ◽  
Sampling Technique ◽  
Framing Effect ◽  
Escalation Of Commitment ◽  
Anova Analysis ◽  
Analysis Techniques ◽  
Management Students

Escalation of commitment is a decision to increase or expand the commitment to a project or a particular investment even though the investment project or indicate failure. This research has the objective to obtain empirical evidence of the effect of adverse selection and negative framing effect on the escalation of commitment tendency. Experimental design used of this research is 2 x 2 factorial design with the instrument in the form of cases. Participants in this research were Magister ofAccounting and Magister of Management students, as a proxy manager chosen by purposive sampling technique as much as 196 participants. This research uses of two ways ANOVA analysis techniques. This research proves that adverse selection and negative framing have an influence on the propensity of escalation of commitment.

scholarly journals In the Purchase’s Essence: Sensory and symbolic elements in the descriptions of perfume sales over the Internet

2020 ◽  
Vol 4 (3) ◽  
pp. 217
Author(s):  
Brenda Allana Santos De Paula ◽  
Miriam Leite Farias ◽  
Salomão Alencar de Farias ◽  
Ilda Maria Moraes e Silva
Keyword(s):  
Experimental Design ◽  
Negative Association ◽  
The Internet ◽  
Control Group ◽  
Level Of Involvement ◽  
Dependent Variables ◽  
Internet Sales ◽  
Quasi Experimental ◽  
Product Description ◽  
Do So

This study aimed to analyse whether sensory and symbolic elements used in perfume descriptions in internet sales can positively influence the level of involvement and consumer buying intention. To do so, a quasi-experimental design was adopted with the creation of three scenarios: one control group and two experimental groups.  Each participant was presented to only one of the scenarios created, characterizing the model between subjects. Regarding the results, it was found that it is not possible to perceive differences between the means of the groups in relation to the dependent variables, except for a negative association between sensory aspects and the level of involvement. Therefore, it was concluded that it may not be advantageous to invest in sensory and symbolic aspects present in the product description in internet sales, it is necessary to rethink this strategy due the fact that this environment has a certain limitation with hedonics products.

scholarly journals The current distribution in an electrochemical cell. Part VII. Concluding remarks

2002 ◽  
Vol 67 (4) ◽  
pp. 273-278 ◽  
Author(s):  
Konstantin Popov ◽  
S.M. Pesic ◽  
Predrag Zivkovic
Keyword(s):  
Process Parameters ◽  
Current Distribution ◽  
Current Density ◽  
Electrochemical Cell ◽  
Side Wall ◽  
Cell Geometry ◽  
Electrode Edge ◽  
Side Walls ◽  
In Cells

Anew method for the determination of the ability of an electrolyte to distribute uniformly current density in an electrochemical cell is proposed. It is based on the comparison of the current in cells in which the electrode edges touch the cell side walls with the current in cells with different electrode edge ? cell side wall distances. The effects of cell geometry process parameters and current density are discussed and illustrated using the results presented in the previous papers from this series.

scholarly journals Design and Construction Optical Pumping System

2013 ◽  
Vol 10 (2) ◽  
pp. 462-471
Author(s):  
Baghdad Science Journal
Keyword(s):  
Current Density ◽  
Optical Pumping ◽  
Electrical Energy ◽  
Discharge Voltage ◽  
Flash Lamp ◽  
Damping Factor ◽  
Discharge Current Density ◽  
Pumping System ◽  
Impedance Parameters ◽  
Design And Construction

In this work the design and construction of optical pumping system was presented. The parameters of the pumping source to obtain discharge current density sufficient to shift the flash lamp spectrum towards uv portion of spectrum were measured.The current density was supplied to the flash lamp must be greater than 4000Amp./cm2 to obtain the spectral range wavelength lies between 0.2 and 0.35?m. The current density was obtained by a capacitor 50?F, at 7KV discharge voltage. The applied electrical energy to the flash lamp was more than 1200 J, and the current density was around 5000 Amp./cm2.The electrical parameters of the flash lamp were calculated. The impedance parameters(K0) from the voltage and the peak current pulse was measured in range equal to 57, while the damping factor(?) was 1.3. The energy of the flash lamp was around 75% from the input electrical energy. The external trigger circuit was limited the increase the applied voltage, which is responsible for the damping factor.

scholarly journals Weldability Investigation and Optimization of Process Variables for TIG-Welded Aluminium Alloy (AA 8006)

2021 ◽  
Vol 2021 ◽  
pp. 1-17
Author(s):  
T. Sathish ◽  
S. Tharmalingam ◽  
V. Mohanavel ◽  
K. S. Ashraff Ali ◽  
Alagar Karthick ◽  
...  
Keyword(s):  
Experimental Design ◽  
Aluminium Alloy ◽  
Process Parameters ◽  
Surface Hardness ◽  
Weight Ratio ◽  
Welding Process ◽  
Tig Welding ◽  
Low Weight ◽  
Superior Corrosion Resistance ◽  
Welding Processes

Aluminium and its alloys play a significant role in engineering material applications due to its low weight ratio and superior corrosion resistance. The welding of aluminium alloy is challenging for the normal conventional arc welding processes. This research tries to resolve those issues by the Tungsten Inert Gas welding process. The TIG welding method is an easy, friendly process to perform welding. The widely applicable wrought aluminium AA8006 alloy, which was not considered for TIG welding in earlier studies, is considered in this investigation. For optimizing the number of experiments, the Taguchi experimental design of L9 orthogonal array type experimental design/plan was employed by considering major influencing process parameters like welding speed, base current, and peak current at three levels. The welded samples are included to investigate mechanical characterizations like surface hardness and strengths for standing tensile and impact loading. The results of the investigation on mechanical characterization of permanent joint of aluminium AA8006 alloy TIG welding were statistically analyzed and discussed. The 3D profilometric images of tensile-tested specimens were investigated, and they suggested optimized process parameters based on the result investigations.

Sign in / Sign up

Export Citation Format

Share Document