scholarly journals Improvement of the Firocoxib Dissolution Performance Using Electrospun Fibers Obtained from Different Polymer/Surfactant Associations

2019 ◽  
Vol 20 (12) ◽  
pp. 3084 ◽  
Author(s):  
Lauretta Maggi ◽  
Valeria Friuli ◽  
Enrica Chiesa ◽  
Silvia Pisani ◽  
Mirena Sakaj ◽  
...  
Keyword(s):  
Amorphous State ◽  
Electrospinning Process ◽  
Electrospun Fibers ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Water Interaction ◽  
Remarkable Improvement ◽  
Polymer Surfactant ◽  
Carrier Systems ◽  
Scanning Electron

An electrospinning process was optimized to produce fibers of micrometric size with different combinations of polymeric and surfactant materials to promote the dissolution rate of an insoluble drug: firocoxib. Scanning Electron Microscopy (SEM) showed that only some combinations of the proposed carrier systems allowed the production of suitable fibers and further fine optimization of the technique is also needed to load the drug. Differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD) suggest that the drug is in an amorphous state in the final product. Drug amorphization, the fine dispersion of the active in the carriers, and the large surface area exposed to water interaction obtained through the electrospinning process can explain the remarkable improvement in the dissolution performance of firocoxib from the final product developed.

scholarly journals Extraction of Boron from Ludwigite Ore: Mechanism of Soda-Ash Roasting of Lizardite and Szaibelyite

Minerals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 533 ◽  
Author(s):  
Xin Zhang ◽  
Guanghui Li ◽  
Jinxiang You ◽  
Jian Wang ◽  
Jun Luo ◽  
...  
Keyword(s):  
Sodium Carbonate ◽  
Energy Dispersive Spectrometer ◽  
Low Grade ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Selective Activation ◽  
X Ray ◽  
Shed Light ◽  
Soda Ash ◽  
Scanning Electron

Ludwigite ore is a typical low-grade boron ore accounting for 58.5% boron resource of China, which is mainly composed of magnetite, lizardite and szaibelyite. During soda-ash roasting of ludwigite ore, the presence of lizardite hinders the selective activation of boron. In this work, lizardite and szaibelyite were prepared and their soda-ash roasting behaviors were investigated using thermogravimetric-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), and scanning electron microscope and energy dispersive spectrometer (SEM-EDS) analyses, in order to shed light on the soda-ash activation of boron within ludwigite ore. Thermodynamics of Na2CO3-MgSiO3-Mg2SiO4-Mg2B2O5 via FactSage show that the formation of Na2MgSiO4 was preferential for the reaction between Na2CO3 and MgSiO3/Mg2SiO4. While, regarding the reaction between Na2CO3 and Mg2B2O5, the formation of NaBO2 was foremost. Raising temperature was beneficial for the soda-ash roasting of lizardite and szaibelyite. At a temperature lower than the melting of sodium carbonate (851 °C), the soda-ash roasting of szaibelyite was faster than that of lizardite. Moreover, the melting of sodium carbonate accelerated the reaction between lizardite with sodium carbonate.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

scholarly journals Development of an Oxcarbazepine Solid Dispersion Using Skimmed Milk to Improve the Solubility and Dissolution Profile

2019 ◽  
Vol 11 (05) ◽  
Author(s):  
M. Shah ◽  
D. Patel
Keyword(s):  
Electron Microscopy ◽  
Solid Dispersion ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Infra Red ◽  
Crystalline Nature ◽  
Skimmed Milk ◽  
Scanning Electron

Oxcarbazepine has low solubility and low oral bioavailability, so it’s a challenge to formulate suitable dosage form. In this present investigation, to improve the dissolution rate and solubility, skimmed milk is used as a carrier. Physical mixers were prepared using various drugs to carrier ratio and spray drying technology was used to develop solid dispersion with the carrier. Various techniques were used to characterize the solid dispersion immediately after they were made which includes differential scanning calorimetry, scanning electron microscopy, fourier transform infra- red spectroscopy, X-ray diffraction and in-vitro dissolution profiles. The differential scanning calorimetry thermograms of raw drug indicated of its anhydrous crystalline nature. In thermograms of solid dispersion, the characteristic peak was absent suggesting the change from crystalline nature to amorphous form. X-ray diffraction confirmed those results. X-ray diffraction results of raw drug showed highly intense peak characteristic of its crystalline nature where solid dispersion showed less intense, more diffused peak indicating the change in crystalline form. Fourier transforms infra-red spectroscopy studies showed there was no interaction between drug and carrier. Scanning electron microscopy support the amorphous nature of mixer. The whole formulation showed distinct enhancement in the drug release behavior and solubility. The optimum oxcarbazepine to skimmed milk ratio 1:3 enhances the in-vitro drug release by 3.5 fold and also show distinct increase in solubility. It was concluded that for improvement of solubility of poorly water soluble oxcarbazepine, skimmed milk powder as a carrier can be utilize very well.

scholarly journals Thermal solid-state Z/E isomerization of 2-alkylidene-4-oxothiazolidines: Effects of non-covalent interactions

2011 ◽  
Vol 76 (3) ◽  
pp. 317-328 ◽  
Author(s):  
Zdravko Dzambaski ◽  
Milovan Stojanovic ◽  
Marija Baranac-Stojanovic ◽  
Dragica Minic ◽  
Rade Markovic
Keyword(s):  
Solid State ◽  
1H Nmr Spectroscopy ◽  
Amorphous State ◽  
Intramolecular Hydrogen Bonding ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Configurational Isomerization ◽  
Non Covalent Interactions ◽  
Intramolecular Hydrogen ◽  
Covalent Interactions

Configurational isomerization of stereo-defined 5-substituted and unsubstituted 2-alkylidene-4-oxothiazolidines 1 in the solid state, giving the Z/E mixtures in various ratios, was investigated by 1H-NMR spectroscopy, X-ray powder crystallography and differential scanning calorimetry (DSC). The Z/E composition can be rationalized in terms of non-covalent interactions, involving intermolecular and intramolecular hydrogen bonding and directional non-bonded 1,5-type S...O interactions. X-Ray powder crystallography, using selected crystalline (Z)-4- oxothiazolidine substrates, revealed transformation to the amorphous state during the irreversible Z ? E process. A correlation between previous results on the Z/E isomerization in solution and now in the solid state was established.

scholarly journals Effect of Solid Forms on Physicochemical Properties of Valnemulin

Crystals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 675 ◽  
Author(s):  
Jinbo Ouyang ◽  
Jian Chen ◽  
Limin Zhou ◽  
Fangze Han ◽  
Xin Huang
Keyword(s):  
Organic Acids ◽  
Physicochemical Properties ◽  
Excess Enthalpy ◽  
Vapor Sorption ◽  
Dynamic Vapor Sorption ◽  
Scanning Calorimetry ◽  
Intrinsic Dissolution ◽  
X Ray ◽  
Ft Ir ◽  
Scanning Electron

To improve the physicochemical properties of valnemulin (VLM), different solid forms formed by VLM and organic acids, including tartaric acid (TAR), fumaric acid (FUM), and oxalic acid (OXA), were successfully prepared and characterized by using differential scanning calorimetry (DSC), scanning electron microscope (SEM), X-ray powder diffraction (XRPD), and Fourier-transform infrared spectroscopy (FT-IR). The excess enthalpy Hex between VLM and other organic acids was calculated by COSMOthermX software and was used to evaluate the probability of forming multi-component solids between VLM and organic acids. By thermal analysis, it was confirmed that multi-component solid forms of VLM were thermodynamically more stable than VLM itself. Through dynamic vapor sorption (DVS) experiments, it was found that three multi-component solid forms of VLM had lower hygroscopicity than VLM itself. Furthermore, the intrinsic dissolution rate of VLM and its multi-component forms was determined in one kind of acidic aqueous medium by using UV-vis spectrometry. It was found that the three multi-component solid forms of VLM dissolved faster than VLM itself.

scholarly journals Preparation and Properties of Ginger Essential Oil β-Cyclodextrin/Chitosan Inclusion Complexes

Coatings ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 305 ◽  
Author(s):  
Yan Zhang ◽  
Hui Zhang ◽  
Fang Wang ◽  
Li-Xia Wang
Keyword(s):  
Particle Size ◽  
Essential Oil ◽  
Spray Drying ◽  
Small Particle Size ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ft Ir ◽  
Thermal Stability Of ◽  
Scanning Electron

The ginger essential oil/β-cyclodextrin (GEO/β-CD) composite, ginger essential oil/β-cyclodextrin/chitosan (GEO/β-CD/CTS) particles and ginger essential oil/β-cyclodextrin/chitosan (GEO/β-CD/CTS) microsphere were prepared with the methods of inclusion, ionic gelation and spray drying. Their properties were studied by using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermo-gravimetry analysis (TGA), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). The results showed that the particle size of GEO/β-CD composite was smaller than that of β-CD and GEO/β-CD/CTS particles were loose and porous, while the microsphere obtained by spray drying had certain cohesiveness and small particle size. Besides, results also indicated that β-CD/CTS could modify properties and improve the thermal stability of GEO, which would improve its application value in food and medical industries.

scholarly journals DESIGN AND DEVELOPMENT OF RILPIVIRINE NANOPARTICLE CONTAINING CHITOSAN USING IONIC GELATION METHOD FOR HIV INFECTIONS

2020 ◽  
pp. 113-118
Author(s):  
MONTUKUMAR PATEL ◽  
NIRAV V. PATEL ◽  
TEJAS B. PATEL
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
In Vitro Release ◽  
Amorphous State ◽  
Hiv Infections ◽  
Spherical Particles ◽  
Ionic Gelation ◽  
Scanning Calorimetry ◽  
Scanning Electron

Objective: The primary objective of the current research was to prepare rilpivirine loaded Nanoparticles containing Chitosan using the ionic gelation method for HIV infections. Methods: The nanoparticles of rilpivirine were prepared using the ionic gelation technique. Further, nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and in vitro drug release. Results: The optimized nanoparticles were found with a particle size of 130.30±5.29 nm (mean±SD) and entrapment efficiency (% EE) of 77.10±0.50%. Scanning electron microscopy technique exposed spherical particles with uniform size. It was observed that the nanoparticles created showed the absence of the crystalline nature of the drug and its switch to the amorphous state. Results showed that more than 45% of the pure drug is released in 50 min and after 90 min almost about 95% of the drug is released. Conclusion: The research study concluded that the in vitro release profile of nanoparticles was found to be sustained up to 24 hr. Sustained release of the rilpivirine could improve patient obedience to drug regimens, growing action effectiveness. 

The Degradation of Poly (Butylene Succinate)/Natural Rubber Composites

2014 ◽  
Vol 934 ◽  
pp. 110-115
Author(s):  
Li Gao ◽  
Er Juan Zhi ◽  
Ping Li Wang ◽  
Jun Hui Ji
Keyword(s):  
Green Composites ◽  
X Ray Diffraction ◽  
Rubber Composites ◽  
Scanning Calorimetry ◽  
Butylene Succinate ◽  
X Ray ◽  
Weight Losses ◽  
Natural Rubber Composites ◽  
Degradation Test ◽  
Scanning Electron

In this study, poly (butylene succinate) (PBS)/nature rubber (NR) composites were prepared, and the effects of NR content on the biodegradability were evaluated by vermiculite-degradation test. X-ray Diffraction, differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) were used to characterize the degraded blends. The weight losses of PBS/NR composites are higher than that of pure PBS, and increased with adding NR content. The weight loss of 30% NR content composite after 120 days is 16.84%. The XRD and DSC results show that the crystallinity of PBS/NR composites increase after buried in vermiculite. These results were confirmed using SEM observations by the presence of many large holes and more cracks in the degradation surface morphology of the increasing content of NR. It was observed that PBS/NR composites are green-composites or eco-materials.

scholarly journals Deformation induced martensite characterization in Fe-30%Ni-5%Cu alloy

2012 ◽  
Vol 48 (2) ◽  
pp. 259-264 ◽  
Author(s):  
E. Güler ◽  
M. Güler
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Dsc Measurements ◽  
Cu Alloy ◽  
The Face ◽  
Xrd Techniques ◽  
Scanning Electron

Deformation induced martensite properties were examined according to existing martensite morphology, crystallography and formation temperatures for different prior austenite homogenization conditions in Fe-30%Ni-5%Cu alloy. Scanning electron microscope (SEM), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) techniques were employed to investigation. Scanning electron microscope observations showed elongated deformation induced martensite morphology in the austenite phase of alloy. As well, after deformation martensite start temperatures (Ms) were determined as -101?C and -105?C from DSC measurements for different homogenization conditions. In addition, X-ray diffraction analysis revealed the face centred cubic (fcc) of austenite phases and body centred cubic (bcc) deformation induced martensite phases for all studied samples.

Study of an Energetic-oxidant Co-crystal: Preparation, Characterisation, and Crystallisation Mechanism

2017 ◽  
Vol 67 (5) ◽  
pp. 510 ◽  
Author(s):  
Han Gao ◽  
Wei Jiang ◽  
Jie Liu ◽  
Gazi Hao ◽  
Lei Xiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Diffraction Spectrum ◽  
Solvent Evaporation Method ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

<p>An energetic co-crystal consisting of the most promising military explosive 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) and the most well-known oxidant applied in propellants ammonium perchlorate has been prepared with a simple solvent evaporation method. Scanning electron microscopy revealed that the morphology of co-crystal differs greatly from each component. The X-ray diffraction spectrum, FTIR, Raman spectra, and differential scanning calorimetry characterisation further prove the formation of the co-crystal. The result of determination of hygroscopic rate indicated the hygroscopicity was effectively reduced. At last, the crystallisation mechanism has been discussed.</p>

Sign in / Sign up

Export Citation Format

Share Document