scholarly journals Testing of Eluates from Waterproof Building Materials for Potential Environmental Effects Due to the Behavior of Enchytraeus albidus

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 294
Author(s):  
Marya Anne von Wolff ◽  
Stephan Pflugmacher ◽  
Dietmar Stephan
Keyword(s):  
Environmental Impact ◽  
Environmental Effects ◽  
Avoidance Behavior ◽  
Building Materials ◽  
Minor Effect ◽  
Toxicity Screening ◽  
Construction Products ◽  
Potential Environmental Impact ◽  
A Minor ◽  
Harmful Effects

In order to determine the potential environmental impact of construction products, it is necessary to evaluate their influence on organisms exposed to them or their eluates under environmental conditions. The behavior of the white worm Enchytraeus albidus is a useful tool for assessing the potential environmental impact of construction products in contact with water and soil. This study investigates the environmental effects of eluates from two construction products, a reactive waterproofing product, and an injection resin, on the reproduction and avoidance behavior of E. albidus. The eluates were prepared according to existing guidelines. The soil used for the tests was moistened with the eluates of the construction products. The reproduction results of the worms were collected after six weeks of exposure. Offsprings were counted under the microscope and statistically analyzed. Results from the avoidance behavior were collected after 48 h of exposure, and results were compared with the reproduction results. The eluates from both construction products induced significant changes in the reproduction behavior of E. albidus. Undiluted or only slightly diluted eluates of the injection resin drastically reduced the reproduction of the worms, whereas the leaches of the reactive waterproofing product only had a minor effect. The avoidance results for the injection resin indicates that its presence in the habitat is clearly detrimental to the survival of E. albidus, while the avoidance results for the waterproofing resin showed an initial avoidance of the eluates, but no harmful effects were observed. The avoidance test is a way of rapid toxicity screening of environmental samples when time is a critical parameter to measure possible environmental effects. This study shows that ecotoxicological tests using Enchytraeids are a valuable and important tool for understanding the mode of action of eluates from construction products in the environment.

scholarly journals Eow criteria for waste-derived aggregates

2017 ◽  
Author(s):  
Ole Hjelmar ◽  
Hans A. Van der Sloot ◽  
Rob N. J. Comans ◽  
Margareta Wahlström
Keyword(s):  
European Union ◽  
Environmental Impact ◽  
Health It ◽  
Limit Values ◽  
Eu Member States ◽  
Construction Products ◽  
Potential Environmental Impact ◽  
Specific Construction ◽  
The Eu ◽  
Construction Product

Waste-derived aggregates are being considered as possible candidates for development of End-of-Waste (EoW) criteria at European Union (EU) level in accordance with Article 6 (1) of the EU Waste Framework Directive (2008/98/EC) as a means of increasing the recovery of resources from waste. If a waste-derived aggregate achieves EoW status, it will become a (construction) product and hence be regulated by the Construction Products Regulation (CPR) which means that in most EU Member States there will be no applicable environmental protection regulation. It is therefore important that the criteria a waste-derived aggregate must fulfil to achieve and maintain EoW status ensure sufficient protection of the environment and human health. It is shown that EoW criteria that do not include restrictions on the conditions of the use of waste-derived aggregates for specific construction purposes will result in leaching limit values that are so stringent that very few, if any, waste-derived aggregates can meet them. It is therefore proposed to impose restrictions and conditions on the use as part of possible future EoW criteria for waste-derived aggregates, and a step-wise methodology for development of more realistic leaching limit values for EoWis outlined. The methodology incorporates the mitigating effects of various measures that reduce the potential environmental impact of construction applications with waste-derived aggregates. Recommendations are also made of the practical testing and documentation procedures for aggregates with EoW status within the framework of the CPR.

Improvement of monitoring of tertiary filtration with particle counting

2006 ◽  
Vol 6 (1) ◽  
pp. 1-9
Author(s):  
V. Miska ◽  
J.H.J.M. van der Graaf ◽  
J. de Koning
Keyword(s):  
Particle Surface ◽  
Minor Effect ◽  
Particle Size Distributions ◽  
Particle Volume ◽  
Mass Distributions ◽  
Particle Counting ◽  
Total Particle ◽  
Particle Counts ◽  
A Minor ◽  
Sample Dilution

Nowadays filtration processes are still monitored with conventional analyses like turbidity measurements and, in case of flocculation–filtration, with phosphorus analyses. Turbidity measurements have the disadvantage that breakthrough of small flocs cannot be displayed, because of the blindness regarding changes in the mass distributions. Additional particle volume distributions calculated from particle size distributions (PSDs) would provide a better assessment of filtration performance. Lab-scale experiments have been executed on a flocculation–filtration column fed with effluent from WWTP Beverwijk in The Netherlands. Besides particle counting at various sampling points, the effect of sample dilution on the accuracy of PSD measurements has been reflected. It was found that the dilution has a minor effect on PSD of low turbidity samples such as process filtrate. The correlation between total particle counts, total particle volume (TPV) and total particle surface is not high but is at least better for diluted measurements of particles in the range 2–10 μm. Furthermore, possible relations between floc-bound phosphorus and TPV removal had been investigated. A good correlation coefficient is found for TPV removal versus floc-bound phosphorus removal for the experiments with polyaluminiumchloride and the experiments with single denitrifying and blank filtration.

scholarly journals Thermal Characterization of Recycled Materials for Building Insulation

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3564
Author(s):  
Arnas Majumder ◽  
Laura Canale ◽  
Costantino Carlo Mastino ◽  
Antonio Pacitto ◽  
Andrea Frattolillo ◽  
...  
Keyword(s):  
Environmental Impact ◽  
Environmental Sustainability ◽  
Building Materials ◽  
Raw Materials ◽  
Natural Fibers ◽  
Thermal Characterization ◽  
Recycled Materials ◽  
Building Insulation ◽  
Operational Phase

The building sector is known to have a significant environmental impact, considering that it is the largest contributor to global greenhouse gas emissions of around 36% and is also responsible for about 40% of global energy consumption. Of this, about 50% takes place during the building operational phase, while around 10–20% is consumed in materials manufacturing, transport and building construction, maintenance, and demolition. Increasing the necessity of reducing the environmental impact of buildings has led to enhancing not only the thermal performances of building materials, but also the environmental sustainability of their production chains and waste prevention. As a consequence, novel thermo-insulating building materials or products have been developed by using both locally produced natural and waste/recycled materials that are able to provide good thermal performances while also having a lower environmental impact. In this context, the aim of this work is to provide a detailed analysis for the thermal characterization of recycled materials for building insulation. To this end, the thermal behavior of different materials representing industrial residual or wastes collected or recycled using Sardinian zero-km locally available raw materials was investigated, namely: (1) plasters with recycled materials; (2) plasters with natural fibers; and (3) building insulation materials with natural fibers. Results indicate that the investigated materials were able to improve not only the energy performances but also the environmental comfort in both new and in existing buildings. In particular, plasters and mortars with recycled materials and with natural fibers showed, respectively, values of thermal conductivity (at 20 °C) lower than 0.475 and 0.272 W/(m⋅K), while that of building materials with natural fibers was always lower than 0.162 W/(m⋅K) with lower values for compounds with recycled materials (0.107 W/(m⋅K)). Further developments are underway to analyze the mechanical properties of these materials.

scholarly journals Linkage mapping identifies a non-synonymous mutation in FLOWERING LOCUS T (FT-B1) increasing spikelet number per spike

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jonathan Brassac ◽  
Quddoos H. Muqaddasi ◽  
Jörg Plieske ◽  
Martin W. Ganal ◽  
Marion S. Röder
Keyword(s):  
Flowering Time ◽  
Aspartic Acid ◽  
Synonymous Substitution ◽  
Minor Effect ◽  
Phenotypic Variance ◽  
Spikelet Number ◽  
Wheat Varieties ◽  
Trait Locus ◽  
A Minor ◽  
Spikelet Number Per Spike

AbstractTotal spikelet number per spike (TSN) is a major component of spike architecture in wheat (Triticumaestivum L.). A major and consistent quantitative trait locus (QTL) was discovered for TSN in a doubled haploid spring wheat population grown in the field over 4 years. The QTL on chromosome 7B explained up to 20.5% of phenotypic variance. In its physical interval (7B: 6.37–21.67 Mb), the gene FLOWERINGLOCUST (FT-B1) emerged as candidate for the observed effect. In one of the parental lines, FT-B1 carried a non-synonymous substitution on position 19 of the coding sequence. This mutation modifying an aspartic acid (D) into a histidine (H) occurred in a highly conserved position. The mutation was observed with a frequency of ca. 68% in a set of 135 hexaploid wheat varieties and landraces, while it was not found in other plant species. FT-B1 only showed a minor effect on heading and flowering time (FT) which were dominated by a major QTL on chromosome 5A caused by segregation of the vernalization gene VRN-A1. Individuals carrying the FT-B1 allele with amino acid histidine had, on average, a higher number of spikelets (15.1) than individuals with the aspartic acid allele (14.3) independent of their VRN-A1 allele. We show that the effect of TSN is not mainly related to flowering time; however, the duration of pre-anthesis phases may play a major role.

scholarly journals Special Issue: Supplementary Cementitious Materials in Concrete, Part I

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2291
Author(s):  
Alessandro P. Fantilli ◽  
Daria Jóźwiak-Niedźwiedzka
Keyword(s):  
Environmental Impact ◽  
Portland Cement ◽  
Building Materials ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Special Issue ◽  
Cement Production ◽  
Concrete Part

The environmental impact of the Portland cement production and the large use of cement-based building materials is a growing problem [...]

scholarly journals Development of Building Information Modeling Template for Environmental Impact Assessment

2021 ◽  
Vol 13 (6) ◽  
pp. 3092
Author(s):  
Sungwoo Lee ◽  
Sungho Tae ◽  
Hyungjae Jang ◽  
Chang U. Chae ◽  
Youngjin Bok
Keyword(s):  
Environmental Impact ◽  
Performance Assessment ◽  
Environmental Performance ◽  
Building Materials ◽  
Building Information Modeling ◽  
Information Modeling ◽  
Assessment Tools ◽  
Building Information ◽  
Environmental Performance Assessment ◽  
Assessment Results

Eco-friendly building designs that use building information modeling (BIM) have become popular, and a variety of eco-friendly building assessment technologies that take advantage of BIM are being developed. However, existing building environmental performance assessment technologies that use BIM are linked to external assessment tools, and there exist compatibility issues among programs; it requires a considerable amount of time to address these problems, owing to the lack of experts who can operate the programs. This study aims to develop eco-friendly templates for assessing the embodied environmental impact of buildings using BIM authoring tools as part of the development of BIM-based building life cycle assessment (LCA) technologies. Therefore, an embodied environmental impact unit database was developed, for major building materials during production and operating stages, to perform embodied environmental impact assessments. Moreover, a major structural element library that uses the database was developed and a function was created to produce building environmental performance assessment results tables, making it possible to review the eco-friendliness of buildings. A case study analysis was performed to review the feasibility of the environmental performance assessment technologies. The results showed a less than 5% effective error rate in the assessment results that were obtained using the technology developed in this study compared with the assessment results based on the actual calculation and operating stage energy consumption figures, which proves the reliability of the proposed approach.

scholarly journals IL-6 Is Not Absolutely Essential for the Development of a TH17 Immune Response after an Aerosol Infection with Mycobacterium tuberculosis H37rv

Cells ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 9
Author(s):  
Kristina Ritter ◽  
Jan Christian Sodenkamp ◽  
Alexandra Hölscher ◽  
Jochen Behrends ◽  
Christoph Hölscher
Keyword(s):  
Immune Response ◽  
Inflammatory Diseases ◽  
Mycobacterial Infection ◽  
Minor Effect ◽  
Mycobacterium Tuberculosis H37rv ◽  
Th 17 ◽  
Anti Inflammatory ◽  
A Minor ◽  
Aerosol Infection ◽  
Deficient Mice

Anti-inflammatory treatment of chronic inflammatory diseases often increases susceptibility to infectious diseases such as tuberculosis (TB). Since numerous chronic inflammatory and autoimmune diseases are mediated by interleukin (IL)-6-induced T helper (TH) 17 cells, a TH17-directed anti-inflammatory therapy may be preferable to an IL-12-dependent TH1 inhibition in order to avoid reactivation of latent infections. To assess, however, the risk of inhibition of IL-6-dependent TH17-mediated inflammation, we examined the TH17 immune response and the course of experimental TB in IL-6- and T-cell-specific gp130-deficient mice. Our study revealed that the absence of IL-6 or gp130 on T cells has only a minor effect on the development of antigen-specific TH1 and TH17 cells. Importantly, these gene-deficient mice were as capable as wild type mice to control mycobacterial infection. Together, in contrast to its key function for TH17 development in other inflammatory diseases, IL-6 plays an inferior role for the generation of TH17 immune responses during experimental TB.

scholarly journals Sweet taste of heavy water

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Natalie Ben Abu ◽  
Philip E. Mason ◽  
Hadar Klein ◽  
Nitzan Dubovski ◽  
Yaron Ben Shoshan-Galeczki ◽  
...  
Keyword(s):  
Heavy Water ◽  
Calcium Release ◽  
Homology Modelling ◽  
Taste Receptor ◽  
Chemical Properties ◽  
Sweet Taste ◽  
Minor Effect ◽  
Dynamics Simulations ◽  
A Minor ◽  
Physical And Chemical

AbstractHydrogen to deuterium isotopic substitution has only a minor effect on physical and chemical properties of water and, as such, is not supposed to influence its neutral taste. Here we conclusively demonstrate that humans are, nevertheless, able to distinguish D2O from H2O by taste. Indeed, highly purified heavy water has a distinctly sweeter taste than same-purity normal water and can add to perceived sweetness of sweeteners. In contrast, mice do not prefer D2O over H2O, indicating that they are not likely to perceive heavy water as sweet. HEK 293T cells transfected with the TAS1R2/TAS1R3 heterodimer and chimeric G-proteins are activated by D2O but not by H2O. Lactisole, which is a known sweetness inhibitor acting via the TAS1R3 monomer of the TAS1R2/TAS1R3, suppresses the sweetness of D2O in human sensory tests, as well as the calcium release elicited by D2O in sweet taste receptor-expressing cells. The present multifaceted experimental study, complemented by homology modelling and molecular dynamics simulations, resolves a long-standing controversy about the taste of heavy water, shows that its sweet taste is mediated by the human TAS1R2/TAS1R3 taste receptor, and opens way to future studies of the detailed mechanism of action.

scholarly journals Attributional & Consequential Life Cycle Assessment: Definitions, Conceptual Characteristics and Modelling Restrictions

2021 ◽  
Vol 13 (13) ◽  
pp. 7386
Author(s):  
Thomas Schaubroeck ◽  
Simon Schaubroeck ◽  
Reinout Heijungs ◽  
Alessandra Zamagni ◽  
Miguel Brandão ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Product Life Cycle ◽  
Sustainability Assessment ◽  
Consequential Life Cycle Assessment ◽  
Modelling Framework ◽  
Potential Environmental Impact ◽  
Reference Environment ◽  
The Impact

To assess the potential environmental impact of human/industrial systems, life cycle assessment (LCA) is a very common method. There are two prominent types of LCA, namely attributional (ALCA) and consequential (CLCA). A lot of literature covers these approaches, but a general consensus on what they represent and an overview of all their differences seems lacking, nor has every prominent feature been fully explored. The two main objectives of this article are: (1) to argue for and select definitions for each concept and (2) specify all conceptual characteristics (including translation into modelling restrictions), re-evaluating and going beyond findings in the state of the art. For the first objective, mainly because the validity of interpretation of a term is also a matter of consensus, we argue the selection of definitions present in the 2011 UNEP-SETAC report. ALCA attributes a share of the potential environmental impact of the world to a product life cycle, while CLCA assesses the environmental consequences of a decision (e.g., increase of product demand). Regarding the second objective, the product system in ALCA constitutes all processes that are linked by physical, energy flows or services. Because of the requirement of additivity for ALCA, a double-counting check needs to be executed, modelling is restricted (e.g., guaranteed through linearity) and partitioning of multifunctional processes is systematically needed (for evaluation per single product). The latter matters also hold in a similar manner for the impact assessment, which is commonly overlooked. CLCA, is completely consequential and there is no limitation regarding what a modelling framework should entail, with the coverage of co-products through substitution being just one approach and not the only one (e.g., additional consumption is possible). Both ALCA and CLCA can be considered over any time span (past, present & future) and either using a reference environment or different scenarios. Furthermore, both ALCA and CLCA could be specific for average or marginal (small) products or decisions, and further datasets. These findings also hold for life cycle sustainability assessment.

scholarly journals Effect of Different SiO2 Polymorphs on the Reaction Between SiO2 and SiC in Si Production

2021 ◽  
Vol 52 (2) ◽  
pp. 792-803
Author(s):  
Marit Buhaug Folstad ◽  
Eli Ringdalen ◽  
Halvard Tveit ◽  
Merete Tangstad
Keyword(s):  
Amorphous Silica ◽  
Reaction Rate ◽  
Reduction Reaction ◽  
Minor Effect ◽  
Target Temperature ◽  
Heating Rates ◽  
Significant Difference ◽  
Sio2 Polymorphs ◽  
A Minor ◽  
Final Composition

AbstractThis work investigates the phase transformations in silica (SiO2) during heating to a target temperature between 1700 °C and 1900 °C and the effect of SiO2 polymorphs on the reduction reaction 2SiO2 + SiC = 3SiO + CO in silicon production. Different heating rates up to target temperature have been used to achieve the different compositions of quartz, amorphous silica and cristobalite. The different heating rates had a minor effect on the final composition, and longer time at temperatures > 1400 °C were necessary to achieve greater variations in the final composition. Heating above the melting temperature gave more amorphous silica and less cristobalite, as amorphous silica also may form from β-cristobalite. Isothermal furnace experiments were conducted to study the extent of the reduction reaction. This study did not find any significant difference in the effects of quartz, amorphous silica or cristobalite. Increased temperature from 1700 °C to 1900 °C increased the reaction rate.

Sign in / Sign up

Export Citation Format

Share Document