scholarly journals Lignosulfonate-Based Polyurethane Adhesives

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7072
Author(s):  
Sandra Magina ◽  
Nuno Gama ◽  
Luísa Carvalho ◽  
Ana Barros-Timmons ◽  
Dmitry Victorovitch Evtuguin
Keyword(s):  
Adhesive Strength ◽  
Evaluation System ◽  
Curing Kinetics ◽  
Scanning Calorimetry ◽  
Eucalyptus Wood ◽  
Polyurethane Adhesives ◽  
Poly Ethylene ◽  
Thermal Analysis Techniques ◽  
Spent Liquor ◽  
Adhesive Formulation

The feasibility of using lignosulfonate (LS) from acid sulphite pulping of eucalyptus wood as an unmodified polyol in the formulation of polyurethane (PU) adhesives was evaluated. Purified LS was dissolved in water to simulate its concentration in sulphite spent liquor and then reacted with 4,4′-diphenylmethane diisocyanate (pMDI) in the presence or absence of poly(ethylene glycol) with Mw 200 (PEG200) as soft crosslinking segment. The ensuing LS-based PU adhesives were characterized by infrared spectroscopy and thermal analysis techniques. The adhesion strength of new adhesives was assessed using Automated Bonding Evaluation System (ABES) employing wood strips as a testing material. The results showed that the addition of PEG200 contributed positively both to the homogenization of the reaction mixture and better crosslinking of the polymeric network, as well as to the interface interactions and adhesive strength. The latter was comparable to the adhesive strength recorded for a commercial white glue with shear stress values of almost 3 MPa. The optimized LS-based PU adhesive formulation was examined for the curing kinetics following the Kissinger and the Ozawa methods by non-isothermal differential scanning calorimetry, which revealed the curing activation energy of about 70 kJ·mol−1.

Curing Kinetics and Rheology of Diglycidyiether of Bisphenol-A Modified by Poly(ethylene glycol) Flexible Chains

2010 ◽  
Vol 123-125 ◽  
pp. 411-414 ◽  
Author(s):  
Da Hu Yao ◽  
Kyung Bok Sun ◽  
Peng Li ◽  
Joong Hee Lee
Keyword(s):  
Ethylene Glycol ◽  
Bisphenol A ◽  
Epoxy Resin ◽  
Kinetic Parameters ◽  
Curing Kinetics ◽  
Poly Ethylene Glycol ◽  
Scanning Calorimetry ◽  
Exponential Factor ◽  
Curing Reaction ◽  
Poly Ethylene

The curing reaction of the system bisphenol-A glycidol ether epoxy resin modified by poly (ethylene glycol) (PEO) and flexible amine (D-230) as curing agent has been studied by means of differential scanning calorimetry (DSC) and thermal scanning rheometry. The curing kinetic parameters have been calculated from the non-thermal DSC curve. The kinetic analysis suggests that the two-parameter autocatalytic model is more appropriate to describe the kinetics of the curing reaction of the system. Increasing the PU content leads to an increase in the heat of curing and has a little effect on the kinetic parameters apparent activation energy (Ea), pre-exponential factor (A), and order of the reaction (m and n). The rheological properties were measured by isothermal curing evolution. Introduction of PEO flexible chains delayed the polymerization. It has been confirmed that the introduction of PEO chains in the structure of the epoxy resin increases the mobility of the molecular segment of the epoxy networks and results in the decrease in glass transition temperature.

scholarly journals Thermal and Photocatalytic Performance of Unsaturated Polyester Resins Modified with TiO2 Nanoparticles as Panel Bodies for Vehicles

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2036
Author(s):  
Miren Blanco ◽  
Cristina Monteserín ◽  
Nerea Uranga ◽  
Estíbaliz Gómez ◽  
Estíbaliz Aranzabe ◽  
...  
Keyword(s):  
Tio2 Nanoparticles ◽  
Energy Use ◽  
Near Infrared ◽  
Uv Light ◽  
Unsaturated Polyester ◽  
Curing Kinetics ◽  
Pollutant Emissions ◽  
Transport Sector ◽  
Scanning Calorimetry ◽  
Photocatalytic Effect

The transport sector is the fastest growing contributor to climate emissions and experiences the highest growth in energy use. This study explores the use of TiO2 nanoparticles for obtaining photocatalytic nanocomposites with improved infrared reflectance properties. The nanocomposites were prepared by dispersing 0–20 wt% of TiO2 nanoparticles in an unsaturated polyester resin. The effect of TiO2 on the curing kinetics was studied by differential scanning calorimetry, showing a significant delay of the curing reactions. The thermal reflectance of the modified resins was characterized by UV-Vis-NIR spectrophotometry, measuring total solar reflectance (TSR). The TiO2 greatly increased the TSR of the resin, due to the reflectance properties of the nanoparticles and the change in color of the modified resin. These nanocomposites reflect a significant part of near-infrared radiation, which can contribute to a reduction of the use of heating, ventilation, and air conditioning. Moreover, the photocatalytic effect of the TiO2 modified nanocomposites was studied by monitoring the degradation of an organic model contaminant in an aqueous medium under UV light, and the reusability of the nanocomposites was studied with 5 cycles. The developed nanocomposites are proposed as a solution for reducing global warming and pollutant emissions.

scholarly journals Effects of Ni Additions on the High Temperature Expansion, Melting and Oxidation Behaviors of Cobalt-Based Superalloys

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 173
Author(s):  
Patrice Berthod ◽  
Lionel Aranda ◽  
Jean-Paul Gomis
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Mechanical Analysis ◽  
Scanning Calorimetry ◽  
Beneficial Effects ◽  
Ni Addition ◽  
High Temperature Expansion ◽  
High Fraction ◽  
Thermal Analysis Techniques ◽  
Ni Additions

Nickel is often added to cobalt-based superalloys to stabilize their austenitic structure. In this work the effects of Ni on several high temperature properties of a chromium-rich cobalt-based alloy reinforced by high fraction of TaC carbides are investigated. Different thermal analysis techniques are used: differential scanning calorimetry (DSC), thermo-mechanical analysis (TMA) and thermogravimetry (TG). Results show that the progressive addition of nickel did not induce great modifications of microstructure, refractoriness or thermal expansion. However, minor beneficial effects were noted, including reduction of the melting temperature range and slight decrease in thermal expansion coefficient. The most important improvement induced by Ni addition concerns the hot oxidation behavior. In this way, introducing several tens wt % Ni in this type of cobalt-based alloy may be recommended.

scholarly journals Tailoring Atomoxetine Release Rate from DLP 3D-Printed Tablets Using Artificial Neural Networks: Influence of Tablet Thickness and Drug Loading

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 111
Author(s):  
Gordana Stanojević ◽  
Djordje Medarević ◽  
Ivana Adamov ◽  
Nikola Pešić ◽  
Jovana Kovačević ◽  
...  
Keyword(s):  
Ethylene Glycol ◽  
Release Rate ◽  
Drug Loading ◽  
Prolonged Release ◽  
Cylindrical Shape ◽  
Poly Ethylene Glycol ◽  
Scanning Calorimetry ◽  
3D Printed ◽  
Artificial Neural ◽  
Poly Ethylene

Various three-dimensional printing (3DP) technologies have been investigated so far in relation to their potential to produce customizable medicines and medical devices. The aim of this study was to examine the possibility of tailoring drug release rates from immediate to prolonged release by varying the tablet thickness and the drug loading, as well as to develop artificial neural network (ANN) predictive models for atomoxetine (ATH) release rate from DLP 3D-printed tablets. Photoreactive mixtures were comprised of poly(ethylene glycol) diacrylate (PEGDA) and poly(ethylene glycol) 400 in a constant ratio of 3:1, water, photoinitiator and ATH as a model drug whose content was varied from 5% to 20% (w/w). Designed 3D models of cylindrical shape tablets were of constant diameter, but different thickness. A series of tablets with doses ranging from 2.06 mg to 37.48 mg, exhibiting immediate- and modified-release profiles were successfully fabricated, confirming the potential of this technology in manufacturing dosage forms on demand, with the possibility to adjust the dose and release behavior by varying drug loading and dimensions of tablets. DSC (differential scanning calorimetry), XRPD (X-ray powder diffraction) and microscopic analysis showed that ATH remained in a crystalline form in tablets, while FTIR spectroscopy confirmed that no interactions occurred between ATH and polymers.

scholarly journals Comparative Study of Structural Changes of Polylactide and Poly(ethylene terephthalate) in the Presence of Trichoderma viride

2021 ◽  
Vol 22 (7) ◽  
pp. 3491
Author(s):  
Grażyna B. Dąbrowska ◽  
Zuzanna Garstecka ◽  
Ewa Olewnik-Kruszkowska ◽  
Grażyna Szczepańska ◽  
Maciej Ostrowski ◽  
...  
Keyword(s):  
Structural Changes ◽  
Ethylene Terephthalate ◽  
Molecular Mechanisms ◽  
Blot Hybridization ◽  
Trichoderma Viride ◽  
Cost Effective ◽  
Plastic Pollution ◽  
Scanning Calorimetry ◽  
Poly Ethylene Terephthalate ◽  
Poly Ethylene

Plastic pollution is one of the crucial global challenges nowadays, and biodegradation is a promising approach to manage plastic waste in an environment-friendly and cost-effective way. In this study we identified the strain of fungus Trichoderma viride GZ1, which was characterized by particularly high pectinolytic activity. Using differential scanning calorimetry, Fourier-transform infrared spectroscopy techniques, and viscosity measurements we showed that three-month incubation of polylactide and polyethylene terephthalate in the presence of the fungus lead to significant changes of the surface of polylactide. Further, to gain insight into molecular mechanisms underneath the biodegradation process, western blot hybridization was used to show that in the presence of poly(ethylene terephthalate) (PET) in laboratory conditions the fungus produced hydrophobin proteins. The mycelium adhered to the plastic surface, which was confirmed by scanning electron microscopy, possibly due to the presence of hydrophobins. Further, using atomic force microscopy we demonstrated for the first time the formation of hydrophobin film on the surface of aliphatic polylactide (PLA) and PET by T. viride GZ1. This is the first stage of research that will be continued under environmental conditions, potentially leading to a practical application.

scholarly journals Identification of LDPE Grades Focusing on Specific CH2 Raman Vibration Modes

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Richard Jumeau ◽  
Patrice Bourson ◽  
Michel Ferriol ◽  
François Lahure ◽  
Marc Ponçot ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Raman Spectroscopy ◽  
Vibrational Spectroscopy ◽  
Phenomenological Model ◽  
Low Density ◽  
Vibration Modes ◽  
Scanning Calorimetry ◽  
Lamella Thickness ◽  
Poly Ethylene

The possibilities of applications of vibrational spectroscopy techniques (Raman spectroscopy) in the analysis and characterization of polymers are more and more used and accurate. In this paper, our purpose is to characterize Low Density Poly(Ethylene) (LDPE) grades by Raman spectroscopy and in particular with CH2 Raman vibration modes. With temperature measurements, we determine different amorphous and crystalline Raman assignments. From these results and on the basis of the evolution of CH2 bending Raman vibration modes, we develop a phenomenological model in correlation with Differential Scanning Calorimetry and in particular with crystalline lamella thickness determination.

scholarly journals Evaluation of the Ultraviolet-Curing Kinetics of Ultraviolet-Polymerized Oligomers Cured Using Poly (Ethylene Glycol) Dimethacrylate

Coatings ◽  
2018 ◽  
Vol 8 (3) ◽  
pp. 99 ◽  
Author(s):  
Ji-Won Park ◽  
Jong-Gyu Lee ◽  
Gyu-Seong Shim ◽  
Hyun-Joong Kim ◽  
Young-Kwan Kim ◽  
...  
Keyword(s):  
Ethylene Glycol ◽  
Curing Kinetics ◽  
Ethylene Glycol Dimethacrylate ◽  
Glycol Dimethacrylate ◽  
Poly Ethylene Glycol ◽  
Ultraviolet Curing ◽  
Poly Ethylene ◽  
Kinetics Of
Sign in / Sign up

Export Citation Format

Share Document