scholarly journals Study of Thermal, Mechanical and Barrier Properties of Biodegradable PLA/PBAT Films with Highly Oriented MMT

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7189
Author(s):  
Joanna Ludwiczak ◽  
Stanisław Frąckowiak ◽  
Karol Leluk
Keyword(s):  
Oxygen Permeability ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Chain Extender ◽  
Biodegradable Material ◽  
Melt Mixing ◽  
Orientation Process ◽  
Properties Of Materials ◽  
A Chain ◽  
Composite Properties

In order to improve the properties of biodegradable polylactide (PLA), mixtures with polybutylene adipate-co-terephthalate (PBAT) were prepared. PLA is a bio-based and renewable biodegradable material, made from starch. PBAT is a biodegradable polyester for compostable film. In order to improve the composite properties, two types of additives were implemented via melt mixing, a chain extender (CE) and montmorillonite (MMT). CE was used as an interfacial modifier to enhance the adhesion between components. Montmorillonite is a widely studied clay added to polymer nanocomposites. Due to the lamellar structure, it improves the barrier properties of materials. PLA/PBAT films were oriented in the extrusion process and the amounts of filler introduced into the PLA/PBAT nanocomposites were 1.0, 3.0, and 5.0%. The improvement in the PLA barrier properties by the addition of PBAT and 5% of MMT was confirmed as the oxygen permeability decreased almost by a factor of 3. The addition of the biodegradable polymer, chain extender, montmorillonite, and the implemented orientation process resulted in a decrease in composite viscosity and an increase in the PLA crystallinity percentage (up to 25%), and the wettability tests confirmed the synergic behavior of the selected polymer blend.

scholarly journals Fabrication and characterization of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) modified with nano-montmorillonite biocomposite

e-Polymers ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 038-046
Author(s):  
Xu Yan ◽  
Wanru Zhou ◽  
Xiaojun Ma ◽  
Binqing Sun
Keyword(s):  
Thermal Stability ◽  
Oxygen Permeability ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Nucleating Agent ◽  
Vapor Permeability ◽  
Casting Method ◽  
Increasing Trend ◽  
Solution Casting Method

Abstract In this study, a poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) modified with nano-montmorillonite biocomposite (MMT/PHBH) was fabricated by solution-casting method. The results showed that the addition of MMT increased the crystallinity and the number of spherulites, which indicated that MMT was an effective nucleating agent for PHBH. The maximum decomposition peak of the biocomposites moved to a high temperature and residue presented an increasing trend. The biocomposites showed the best thermal stability at 1 wt% MMT. Compared with PHBH, 182.5% and 111.2% improvement in elastic modulus and tensile strength were obtained, respectively. Moreover, the oxygen permeability coefficient and the water vapor permeability of MMT/PHBH biocomposites decreased by 43.9% and 6.9%, respectively. It was also found that the simultaneous enhancements on the crystallizing, thermal stability, mechanical, and barrier properties of biocomposites were mainly caused by the formation of intercalated structure between PHBH and MMT.

scholarly journals Characteristics of nanoclay reinforced starch biocomposites through the extrusion process

2018 ◽  
Vol 204 ◽  
pp. 00008
Author(s):  
Heru Suryanto ◽  
Alfian Widi Rahmawan ◽  
Solichin ◽  
Sahana Rizki Tata ◽  
Uun Yanuhar
Keyword(s):  
Tensile Strength ◽  
Functional Group ◽  
Extrusion Process ◽  
Cassava Starch ◽  
Diffraction Peak ◽  
Screw Extruder ◽  
Materials Engineering ◽  
Single Screw ◽  
Single Screw Extruder ◽  
Composite Properties

The development of materials engineering has led to many significant discoveries one of which is biocomposite with its diverse applications. The addition of reinforcing materials in biopolymers improves the composite properties. This study aimed at investigating the effect of adding nanoclay on the tensile strength, morphology, functional group, and structure of extruded biocomposites with cassava starch matrix. This experimental research involved different concentrations of nanoclay i.e. 0%, 2.5%, 5%, 7.5%. The extrusion process was performed using a single screw extruder at 120°C. The samples were characterized by tensile testing, XRD, and SEM. The biocomposite reinforced with 5% nanoclay had the highest tensile strength of 10.8 MPa. The highest diffraction peak at 2θ of 19.4° appeared in the sample added with 5% nanoclay. The addition of excessive amounts of nanoclay can hinder the formation of exfoliated structures.

An Investigation of the Barrier Properties and of the Residual Acetaldehyde in Polyethylene Terephthalate Composites

2017 ◽  
Vol 44 (12) ◽  
pp. 19-22
Author(s):  
A.S. Shabaev ◽  
S.Yu. Khashirova ◽  
A.K. Mikitaev ◽  
I.V. Musov ◽  
A.L. Slonov
Keyword(s):  
Carbon Dioxide ◽  
Polymer Composites ◽  
Polyethylene Terephthalate ◽  
Oxygen Permeability ◽  
Gas Permeability ◽  
Polymeric Materials ◽  
Barrier Properties ◽  
Diffusion Cell ◽  
Polybutylene Terephthalate

The diffusion cell to a Tsvet-800 chromatograph for determining the gas permeability of polymeric materials has been optimised. The oxygen permeability and the carbon dioxide permeability of polymer composites based on polyethylene terephthalate and polybutylene terephthalate have been studied. The optimum compositions, combining high barrier properties and a low acetaldehyde content, have been found.

Effect of a chain extender on the properties of poly(lactic acid)/zinc oxide/copper chlorophyll acid antibacterial nanocomposites

2014 ◽  
pp. n/a-n/a ◽  
Author(s):  
Weihua Fan ◽  
Yue Zhao ◽  
Aijing Zhang ◽  
Yukun Liu ◽  
Yanxia Cao ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Lactic Acid ◽  
Chain Extender ◽  
Poly Lactic Acid ◽  
A Chain

scholarly journals Selected properties of biodegradable material produced from thermoplastic starch with by-products of food industry addition

2017 ◽  
Vol 19 (2) ◽  
pp. 51-55 ◽  
Author(s):  
Ewa Zdybel ◽  
Ewa Tomaszewska-Ciosk ◽  
Mateusz Gertchen ◽  
Wioletta Drożdż
Keyword(s):  
Thermal Conductivity ◽  
Food Industry ◽  
Thermoplastic Starch ◽  
Extrusion Process ◽  
Apple Pomace ◽  
Biodegradable Material ◽  
Solubility In Water ◽  
Conductivity Water ◽  
Fruit Pomace ◽  
By Products

Abstract In this work extrusion process were used to create thermoplastic starch and to mix obtained starch with linen, quince and apple pomace at the same time. Obtained starch beads were formed in shapes. In experimental material was determined thermal conductivity, water absorption and the solubility in water. It is possible to get the biodegradable material produced from thermoplastic starch with an addition of fruit pomace. Adding pomace and glycerine to the biodegradable material made from starch change of susceptibility on water action. In the case of materials containing pomace, glycerine addition decreases the susceptibility on water action compared to the material manufactured with pomace addition but without glycerine. In the material containing pomace, glycerine addition caused the increase of the thermal insulation time compared to the material with pomace but no glycerine in it.

scholarly journals Synthesis and Properties of Waterborne Polyurethane (WBPU)/Modified Lignin Amine (MLA) Adhesive: A Promising Adhesive Material

2016 ◽  
Author(s):  
Mohammad Mizanur Rahman ◽  
Md. Hasan Zahir ◽  
Han Do Kim
Keyword(s):  
Adhesive Strength ◽  
Weather Conditions ◽  
Waterborne Polyurethane ◽  
Chain Extender ◽  
Mixing Process ◽  
Adhesive Material ◽  
Lignin Amine ◽  
A Chain ◽  
Modified Lignin ◽  
Adhesive Materials

A series of waterborne polyurethane (WBPU)/modified lignin amine (MLA) adhesives was prepared using modified lignin amine (MLA) as a chain extender by a prepolymer mixing process. A successful Mannich reaction was achieved during the synthesis of MLA by reacting lignin with bis(3-aminopropyl)amine. Higher tensile strength, Young’s modulus and thermal stability were recorded for WBPU/MLA adhesives with higher MLA contents. The WBPU/MLA adhesive materials were used to coat PVC substrates. The adhesive strength increased with increasing MLA content. More importantly, the MLA also enhanced the WBPU/MLA coating in terms of adhesive strength at moderately high temperatures as well as under natural weather exposed conditions. The adhesive strength was essentially unaffected with 6.48 mole% MLA in the WBPU/MLA coating after exposure to natural weather conditions for 180 days.

Study on Stress Measurement of the MSG Magnetic Measurement Stress Sensor Based on Composite Properties of Materials

2013 ◽  
Vol 668 ◽  
pp. 101-104
Author(s):  
Tie Liu Wang ◽  
Zhong Yi Wang ◽  
Wei Wan
Keyword(s):  
Working Conditions ◽  
Stress Measurement ◽  
Theoretical Calculations ◽  
Magnetic Measurement ◽  
Good Correspondence ◽  
Stress Sensor ◽  
The Core ◽  
Properties Of Materials ◽  
Magneto Resistance ◽  
Composite Properties

The magnetic measurement stress sensor is the core of the magnetic measurement stress technology. Magnetic measurement stress sensor using magnetostriction and Giant Magneto Resistance (GMR) theory has good correspondence between stress and magnetic, and been validated scientific and reliable through indoor experiments and engineering applications. This paper gives a method on stress sensor anode calibration, verifies the different performance of the sensor based on different materials, makes an analysis of the error between the theoretical calculations and actual measurements of the standard objects, describes the working conditions of using the sensor and indicates a reasonable match is a prerequisite to obtain the desired signal processing results.

Modification of nylon-6 with poly (m-phenylene isophthalamide) via MDI as a chain extender

1993 ◽  
Vol 28 (18) ◽  
pp. 4862-4867 ◽  
Author(s):  
Ming-Fung Lin ◽  
Yao-Chi Shu
Keyword(s):  
Nylon 6 ◽  
Chain Extender ◽  
A Chain

Rheology of Thermoplastic Polyurethanes

2007 ◽  
Author(s):  
Chang Dae Han
Keyword(s):  
Rheological Behavior ◽  
Thermoplastic Polyurethane ◽  
Complete Characterization ◽  
Chain Extender ◽  
Reaction Sequence ◽  
Molecular Weights ◽  
Soft Segments ◽  
Hard Segments ◽  
A Chain ◽  
Long Chain

Thermoplastic polyurethane (TPU) has received considerable attention from both the scientific and industrial communities (Hepburn 1982; Oertel 1985; Saunders and Frish 1962). Applications for TPUs include automotive exterior body panels, medical implants such as the artificial heart, membranes, ski boots, and flexible tubing. Figure 10.1 gives a schematic that shows the architecture of TPU, consisting of hard and soft segments. Hard segments, which form a crystalline phase at service temperature, are composed of diisocyanate and short-chain diols as a chain extender, while soft segments, which control low-temperature properties, are composed of difunctional long-chain polydiols with molecular weights ranging from 500 to 5000. The soft segments form a flexible matrix between the hard domains. TPUs are synthesized by reacting difunctional long-chain diol with diisocyanate to form a prepolymer, which is then extended by a chain extender via one of two routes: (1) by a dihydric glycol chain extender or (2) by a diamine chain extender. The most commonly used diisocyanate is 4,4’-diphenylmethane diisocyanate (MDI), which reacts with a difunctional polyol forming soft segments, such as poly(tetramethylene adipate) (PTMA) or poly(oxytetramethylene) (POTM), to produce TPU, in which 1,4-butanediol (BDO) is used as a chain extender. There are two methods widely used to produce TPU: (1) one-shot reaction sequence and (2) two-stage reaction sequence. The reaction sequences for both methods are well documented in the literature (Hepburn 1982). It should be mentioned that MDI/BDO/PTMA produces ester-based TPU. One can also produce ether-based TPU when MDI reacts with POTM using BDO as a chain extender. TPUs are often referred to as “multiblock copolymers.” In order to have a better understanding of the rheological behavior of TPUs, one must first understand the relationships between the chemical structure and the morphology; thus, a complete characterization of the materials must be conducted. The rheological behavior of TPU depends, among many factors, on (1) the composition of the soft and hard segments, (2) the lengths of the soft and hard segments and the sequence length distribution, (3) anomalous linkages (branching, cross-linking), and (4) molecular weight.

scholarly journals Development of Biodegradable Whey-Based Laminate Functionalised by Chitosan–Natural Extract Formulations

2020 ◽  
Vol 21 (10) ◽  
pp. 3668
Author(s):  
Sanja Potrč ◽  
Lidija Fras Zemljič ◽  
Meta Sterniša ◽  
Sonja Smole Možina ◽  
Olivija Plohl
Keyword(s):  
Antimicrobial Activity ◽  
Oxygen Permeability ◽  
Surface Composition ◽  
Antioxidant Properties ◽  
Chitosan Nanoparticles ◽  
Barrier Properties ◽  
Penicillium Verrucosum ◽  
Natural Extracts ◽  
Positive Effect ◽  
Macromolecular Solution

In this research, antimicrobial polysaccharide chitosan and natural extracts were used as surface coating of a plastic laminate with an integrated whey layer on the inside. The aim was to establish the biodegradable and active concept of packaging laminates. For this purpose, chitosan nanoparticles (CSNPs) with embedded rosemary or cinnamon extracts were synthesised and characterised. Additionally, a whey-based laminate was functionalised: i) chitosan macromolecular solution was applied as first layer and ii) cinnamon or rosemary extracts encapsulated in CSNPs were applied as upper layer (layer wise deposition). Such functionalised whey-based laminate was physicochemically characterized in terms of elemental surface composition, wettability, morphology and oxygen permeability. The antimicrobial activity was tested against Staphylococcus aureus, Escherichia coli, Aspergillus flavus and Penicillium verrucosum. The antioxidant properties were determined using the ABTS assay. It could be shown that after functionalization of the films with the above-mentioned strategy, the wettability was improved. Furthermore, such whey-based laminates still show excellent barrier properties, good antimicrobial activity and a remarkable antioxidative activity. In addition to the improved biodegradability, this type of lamination could also have a positive effect on the shelf-life of products packaged in such structured films.

Sign in / Sign up

Export Citation Format

Share Document