scholarly journals Ionotropic Gelation of Chitosan Flat Structures and Potential Applications

Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 660
Author(s):  
Pasquale Sacco ◽  
Seidy Pedroso-Santana ◽  
Yogesh Kumar ◽  
Nicolas Joly ◽  
Patrick Martin ◽  
...  
Keyword(s):  
Biomedical Application ◽  
Low Cost ◽  
Ionotropic Gelation ◽  
Mild Conditions ◽  
Initial Analysis ◽  
Gel Beads ◽  
Flat Structures ◽  
Methods Of Synthesis ◽  
Potential Applications ◽  
Flat Membranes

The capability of some polymers, such as chitosan, to form low cost gels under mild conditions is of great application interest. Ionotropic gelation of chitosan has been used predominantly for the preparation of gel beads for biomedical application. Only in the last few years has the use of this method been extended to the fabrication of chitosan-based flat structures. Herein, after an initial analysis of the major applications of chitosan flat membranes and films and their usual methods of synthesis, the process of ionotropic gelation of chitosan and some recently proposed novel procedures for the synthesis of flat structures are presented.

Green Synthesis of Nanocomposites

2022 ◽  
pp. 77-100
Author(s):  
Meenal D. Patil ◽  
Suprimkumar D. Dhas ◽  
Annasaheb V. Moholkar
Keyword(s):  
Green Synthesis ◽  
Low Cost ◽  
Future Generation ◽  
Research Area ◽  
Future Prospects ◽  
Comprehensive Overview ◽  
New Era ◽  
Methods Of Synthesis ◽  
Potential Applications ◽  
Negative Impacts

Nanotechnology has been a dynamic research area over the past few decades because it assures the resolution to the problems that hamper progress. Currently, a new era of ‘green synthesis' is an emerging multidisciplinary field in nanotechnology which employs reliable, sustainable, low-cost, non-hazardous, and eco-friendly techniques. Green synthesis is considered a vital tool to reduce the negative impacts accompanying the traditional methods of synthesis for NPs commonly employed in industry and laboratory. This chapter unveils a comprehensive overview of the recent research on available green techniques for the synthesis of various nanocomposites in order to solve future generation challenges. This chapter also focuses on the green synthesis of various nanocomposites, synthesis parameters, potential applications, merits/demerits, and future prospects.

Low-cost synthesis of carbon nanodots from millets for bioimaging

MRS Advances ◽  
2019 ◽  
Vol 4 (3-4) ◽  
pp. 249-254
Author(s):  
Ngo Khoa Quang ◽  
Che Thi Cam Ha
Keyword(s):  
Water Solubility ◽  
Biomedical Application ◽  
Low Cost ◽  
Average Diameter ◽  
Optical Measurements ◽  
Carbon Nanodots ◽  
Excitation Wavelength ◽  
Simple Method ◽  
Potential Applications ◽  
Multicolor Fluorescence

ABSTRACTWe presented a green and simple method to synthesize carbon nanodots (C-dots) from millets using hydrothermal synthesis route for the first time. The obtained C-dots have average diameter ranging from 6 to 10 nm. Optical measurements showed the insight into the formation of functional groups on the particle surfaces, resulting in their good water solubility and bioconjugation. After treatment with C-dots, small subpopulation of the human cervical tumor cells became bright and exhibited multicolor fluorescence under different excitation wavelength. The achievement demonstrated potential applications of fluorescent C-dots in the field of biomedical application.

scholarly journals Photocatalytic three-component asymmetric sulfonylation via direct C(sp3)-H functionalization

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Shi Cao ◽  
Wei Hong ◽  
Ziqi Ye ◽  
Lei Gong
Keyword(s):  
Asymmetric Catalysis ◽  
Organic Synthesis ◽  
Photochemical Reaction ◽  
Low Cost ◽  
Bioactive Molecules ◽  
Atom Economy ◽  
Mild Conditions ◽  
Wide Range ◽  
Unsaturated Carbonyl Compound ◽  
Direct Functionalization

AbstractThe direct and selective C(sp3)-H functionalization of cycloalkanes and alkanes is a highly useful process in organic synthesis owing to the low-cost starting materials, the high step and atom economy. Its application to asymmetric catalysis, however, has been scarcely explored. Herein, we disclose our effort toward this goal by incorporation of dual asymmetric photocatalysis by a chiral nickel catalyst and a commercially available organophotocatalyst with a radical relay strategy through sulfur dioxide insertion. Such design leads to the development of three-component asymmetric sulfonylation involving direct functionalization of cycloalkanes, alkanes, toluene derivatives or ethers. The photochemical reaction of a C(sp3)-H precursor, a SO2 surrogate and a common α,β-unsaturated carbonyl compound proceeds smoothly under mild conditions, delivering a wide range of biologically interesting α-C chiral sulfones with high regio- and enantioselectivity (>50 examples, up to >50:1 rr and 95% ee). This method is applicable to late-stage functionalization of bioactive molecules, and provides an appealing access to enantioenriched compounds starting from the abundant hydrocarbon compounds.

scholarly journals Visualization of Surface Acoustic Waves in Thin Liquid Films

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
R. W. Rambach ◽  
J. Taiber ◽  
C. M. L. Scheck ◽  
C. Meyer ◽  
J. Reboud ◽  
...  
Keyword(s):  
Liquid Film ◽  
Acoustic Waves ◽  
Low Cost ◽  
Thin Liquid Film ◽  
Surface Acoustic Waves ◽  
Liquid Films ◽  
Theoretical Description ◽  
Propagation Path ◽  
Microfluidic Channels ◽  
Potential Applications

Abstract We demonstrate that the propagation path of a surface acoustic wave (SAW), excited with an interdigitated transducer (IDT), can be visualized using a thin liquid film dispensed onto a lithium niobate (LiNbO3) substrate. The practical advantages of this visualization method are its rapid and simple implementation, with many potential applications including in characterising acoustic pumping within microfluidic channels. It also enables low-cost characterisation of IDT designs thereby allowing the determination of anisotropy and orientation of the piezoelectric substrate without the requirement for sophisticated and expensive equipment. Here, we show that the optical visibility of the sound path critically depends on the physical properties of the liquid film and identify heptane and methanol as most contrast rich solvents for visualization of SAW. We also provide a detailed theoretical description of this effect.

scholarly journals Recent Findings in Azaphilone Pigments

2021 ◽  
Vol 7 (7) ◽  
pp. 541
Author(s):  
Lúcia P. S. Pimenta ◽  
Dhionne C. Gomes ◽  
Patrícia G. Cardoso ◽  
Jacqueline A. Takahashi
Keyword(s):  
Water Solubility ◽  
Biological Activities ◽  
Low Cost ◽  
Scale Up ◽  
Structural Diversity ◽  
Downstream Processing ◽  
Global Market ◽  
Yield Improvement ◽  
Potential Applications ◽  
New Compounds

Filamentous fungi are known to biosynthesize an extraordinary range of azaphilones pigments with structural diversity and advantages over vegetal-derived colored natural products such agile and simple cultivation in the lab, acceptance of low-cost substrates, speed yield improvement, and ease of downstream processing. Modern genetic engineering allows industrial production, providing pigments with higher thermostability, water-solubility, and promising bioactivities combined with ecological functions. This review, covering the literature from 2020 onwards, focuses on the state-of-the-art of azaphilone dyes, the global market scenario, new compounds isolated in the period with respective biological activities, and biosynthetic pathways. Furthermore, we discussed the innovations of azaphilone cultivation and extraction techniques, as well as in yield improvement and scale-up. Potential applications in the food, cosmetic, pharmaceutical, and textile industries were also explored.

scholarly journals Color-Variable Photodynamic Antimicrobial Wool/Acrylic Blended Fabrics

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4141
Author(s):  
Tingting Wang ◽  
Wangbingfei Chen ◽  
Tingting Dong ◽  
Zihao Lv ◽  
Siming Zheng ◽  
...  
Keyword(s):  
Low Cost ◽  
Pathogen Transmission ◽  
Cationic Dyes ◽  
Light Illumination ◽  
Antibacterial Studies ◽  
Wool Fibers ◽  
Visible Light Illumination ◽  
Potential Applications ◽  
Dyed Fabrics ◽  
Acrylic Fibers

Towards the goal of developing scalable, economical and effective antimicrobial textiles to reduce infection transmission, here we prepared color-variable photodynamic materials comprised of photosensitizer (PS)-loaded wool/acrylic (W/A) blends. Wool fibers in the W/A blended fabrics were loaded with the photosensitizer rose bengal (RB), and the acrylic fibers were dyed with a variety of traditional cationic dyes (cationic yellow, cationic blue and cationic red) to broaden their color range. Investigations on the colorimetric and photodynamic properties of a series of these materials were implemented through CIELab evaluation, as well as photooxidation and antibacterial studies. Generally, the photodynamic efficacy of these dual-dyed fabrics was impacted by both the choice, and how much of the traditional cationic dye was employed in the dyeing of the W/A fabrics. When compared with the PS-only singly-dyed material, RB-W/A, that showed a 99.97% (3.5 log units; p = 0.02) reduction of Staphylococcus aureus under visible light illumination (λ ≥ 420 nm, 60 min), the addition of cationic dyes led to a slight decrease in the photoinactivation ability of the dual-dyed fabrics, but was still able to achieve a 99.3% inactivation of S. aureus. Overall, our findings demonstrate the feasibility and potential applications of low cost and color variable RB-loaded W/A blended fabrics as effective self-disinfecting textiles against pathogen transmission.

Synthesis and characterization of hyperbranched poly (sulfone-amine) modified β-cyclodextrin

e-Polymers ◽  
2006 ◽  
Vol 6 (1) ◽  
Author(s):  
Liang Chen ◽  
Peng He ◽  
Zhifeng Jia ◽  
Xinyuan Zhu ◽  
Deyue Yan
Keyword(s):  
Drug Delivery ◽  
Low Cost ◽  
Food Additives ◽  
Synthesis And Characterization ◽  
Good Solubility ◽  
Low Viscosity ◽  
Hyperbranched Poly ◽  
Potential Applications ◽  
Inclusion Ability

AbstractAn economical strategy to prepare hyperbranched poly(sulfone-amine) modified β-cyclodextrins (HPSA-m-CDs) from natural β-cyclodextrin (β-CD) and other commercially available materials has been reported. The final product has many good properties of hyperbranched poly(sulfone-amine)s (good solubility, low viscosity etc.), while its inclusion ability can also be well kept. It is a feasible approach to prepare functionalized modified cyclodextrin at very low cost, and may have potential applications in the fields of catalysis, drug delivery, food additives, etc.

A review of passive self-sensing tag

Sensor Review ◽  
2017 ◽  
Vol 37 (3) ◽  
pp. 338-345 ◽  
Author(s):  
Yawei Xu ◽  
Lihong Dong ◽  
Haidou Wang ◽  
Jiannong Jing ◽  
Yongxiang Lu
Keyword(s):  
Radio Frequency Identification ◽  
Large Scale ◽  
Low Cost ◽  
Integrated Sensor ◽  
Content Type ◽  
Passive Sensing ◽  
Static Information ◽  
Potential Applications ◽  
Frequency Identification ◽  
Identification Tags

Purpose Radio frequency identification tags for passive sensing have attracted wide attention in the area of Internet of Things (IoT). Among them, some tags can sense the property change of objects without an integrated sensor, which is a new trend of passive sensing based on tag. The purpose of this paper is to review recent research on passive self-sensing tags (PSSTs). Design/methodology/approach The PSSTs reported in the past decade are classified in terms of sensing mode, composition and the ways of power supply. This paper presents operation principles of PSSTs and analyzes the characteristics of them. Moreover, the paper focuses on summarizing the latest sensing parameters of PSSTs and their matching equipment. Finally, some potential applications and challenges faced by this emerging technique are discussed. Findings PSST is suitable for long-term and large-scale monitoring compared to conventional sensors because it gets rid of the limitation of battery and has relatively low cost. Also, the static information of objects stored in different PSSTs can be identified by a single reader without touch. Originality/value This paper provides a detailed and timely review of the rapidly growing research in PSST.

Synthesis, Characterization, Applications, and Toxicity of Green Synthesized Nanoparticles

2021 ◽  
Vol 22 ◽  
Author(s):  
João Marcos Pereira Galúcio ◽  
Sorrel Godinho Barbosa de Souza ◽  
Arthur Abinader Vasconcelos ◽  
Alan Kelbis Oliveira Lima ◽  
Kauê Santana da Costa ◽  
...  
Keyword(s):  
Green Synthesis ◽  
Low Cost ◽  
Chemical Properties ◽  
Analytical Techniques ◽  
Industrial Applications ◽  
Synthesis Methods ◽  
Methods Of Synthesis ◽  
Food Applications ◽  
Living Organisms ◽  
Harmful Effects

: Nanotechnology is a cutting-edge area with numerous industrial applications. Nanoparticles are structures that have dimensions ranging from 1–100 nm which exhibit significantly different mechanical, optical, electrical, and chemical properties when compared with their larger counterparts. Synthetic routes that use natural sources, such as plant extracts, honey, and microorganisms are environmentally friendly and low-cost methods that can be used to obtain nanoparticles. These methods of synthesis generate products that are more stable and less toxic than those obtained using conventional methods. Nanoparticles formed by titanium dioxide, zinc oxide, silver, gold, and copper, as well as cellulose nanocrystals are among the nanostructures obtained by green synthesis that have shown interesting applications in several technological industries. Several analytical techniques have also been used to analyze the size, morphology, hydrodynamics, diameter, and chemical functional groups involved in the stabilization of the nanoparticles as well as to quantify and evaluate their formation. Despite their pharmaceutical, biotechnological, cosmetic, and food applications, studies have detected their harmful effects on human health and the environment; and thus, caution must be taken in uses involving living organisms. The present review aims to present an overview of the applications, the structural properties, and the green synthesis methods that are used to obtain nanoparticles, and special attention is given to those obtained from metal ions. The review also presents the analytical methods used to analyze, quantify, and characterize these nanostructures.

Environment-Friendly Design of Lithium Batteries Starting from Biopolymer-Based Electrolyte

NANO ◽  
2021 ◽  
pp. 2130006
Author(s):  
Jiayuan Shi ◽  
Bin Shi
Keyword(s):  
Lithium Batteries ◽  
Lithium Battery ◽  
Water Solubility ◽  
Low Cost ◽  
Organic Liquid ◽  
Adhesive Property ◽  
Environment Friendly ◽  
Battery Materials ◽  
Mild Conditions ◽  
Film Forming

The nondegradable nature and toxicity of organic liquid electrolytes reveal the design deficiency of lithium batteries in environmental protection. Biopolymers can be extracted from biomass under mild conditions, thus they are usually low cost and renewable. The unique characteristics of biopolymers such as water solubility, film-forming capability and adhesive property are of importance for lithium battery. The studies on the biopolymer materials for lithium batteries have been reviewed in this work. Although a lot of work on the biopolymer-based battery materials has been reported, it is still a challenge in the design of lithium battery with zero pollution and zero waste.

Sign in / Sign up

Export Citation Format

Share Document