scholarly journals Advancements in Assessments of Bio-Tissue Engineering and Viable Cell Delivery Matrices Using Bile Acid-Based Pharmacological Biotechnologies

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1861
Author(s):  
Armin Mooranian ◽  
Melissa Jones ◽  
Corina Mihaela Ionescu ◽  
Daniel Walker ◽  
Susbin Raj Wagle ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Viable Cell ◽  
Cell Delivery ◽  
Artificial Organ ◽  
Bioartificial Pancreas ◽  
Advantages And Disadvantages ◽  
Wide Range ◽  
Bioartificial Organs ◽  
Significant Interest ◽  
Modern Technologies

The utilisation of bioartificial organs is of significant interest to many due to their versatility in treating a wide range of disorders. Microencapsulation has a potentially significant role in such organs. In order to utilise microcapsules, accurate characterisation and analysis is required to assess their properties and suitability. Bioartificial organs or transplantable microdevices must also account for immunogenic considerations, which will be discussed in detail. One of the most characterized cases is the investigation into a bioartificial pancreas, including using microencapsulation of islets or other cells, and will be the focus subject of this review. Overall, this review will discuss the traditional and modern technologies which are necessary for the characterisation of properties for transplantable microdevices or organs, summarizing analysis of the microcapsule itself, cells and finally a working organ. Furthermore, immunogenic considerations of such organs are another important aspect which is addressed within this review. The various techniques, methodologies, advantages, and disadvantages will all be discussed. Hence, the purpose of this review is providing an updated examination of all processes for the analysis of a working, biocompatible artificial organ.

scholarly journals Advanced Hydrogels for Cartilage Tissue Engineering: Recent Progress and Future Directions

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4199
Author(s):  
Mahshid Hafezi ◽  
Saied Nouri Khorasani ◽  
Mohadeseh Zare ◽  
Rasoul Esmaeely Neisiany ◽  
Pooya Davoodi
Keyword(s):  
Tissue Engineering ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Biomechanical Properties ◽  
Tissue Growth ◽  
Cartilage Tissue ◽  
Self Healing ◽  
Advantages And Disadvantages ◽  
Wide Range

Cartilage is a tension- and load-bearing tissue and has a limited capacity for intrinsic self-healing. While microfracture and arthroplasty are the conventional methods for cartilage repair, these methods are unable to completely heal the damaged tissue. The need to overcome the restrictions of these therapies for cartilage regeneration has expanded the field of cartilage tissue engineering (CTE), in which novel engineering and biological approaches are introduced to accelerate the development of new biomimetic cartilage to replace the injured tissue. Until now, a wide range of hydrogels and cell sources have been employed for CTE to either recapitulate microenvironmental cues during a new tissue growth or to compel the recovery of cartilaginous structures via manipulating biochemical and biomechanical properties of the original tissue. Towards modifying current cartilage treatments, advanced hydrogels have been designed and synthesized in recent years to improve network crosslinking and self-recovery of implanted scaffolds after damage in vivo. This review focused on the recent advances in CTE, especially self-healing hydrogels. The article firstly presents the cartilage tissue, its defects, and treatments. Subsequently, introduces CTE and summarizes the polymeric hydrogels and their advances. Furthermore, characterizations, the advantages, and disadvantages of advanced hydrogels such as multi-materials, IPNs, nanomaterials, and supramolecular are discussed. Afterward, the self-healing hydrogels in CTE, mechanisms, and the physical and chemical methods for the synthesis of such hydrogels for improving the reformation of CTE are introduced. The article then briefly describes the fabrication methods in CTE. Finally, this review presents a conclusion of prevalent challenges and future outlooks for self-healing hydrogels in CTE applications.

scholarly journals Increasing salinity of fibrinogen solvent generates stable fibrin hydrogels for cell delivery or tissue engineering

2020 ◽  
Author(s):  
Dillon K. Jarrell ◽  
Ethan J. Vanderslice ◽  
Mallory L. Lennon ◽  
Anne C. Lyons ◽  
Mitchell C. VeDepo ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Degradation Rate ◽  
3D Cell Culture ◽  
Dermal Fibroblasts ◽  
Cell Delivery ◽  
Fibrin Gels ◽  
Wide Range

AbstractFibrin has been used clinically for wound coverings, surgical glues, and cell delivery because of its affordability, cytocompatibility, and ability to modulate angiogenesis and inflammation. However, its rapid degradation rate has limited its usefulness as a scaffold for 3D cell culture and tissue engineering. Previous studies have sought to slow the degradation rate of fibrin with the addition of proteolysis inhibitors or synthetic crosslinkers that require multiple functionalization or polymerization steps. These strategies are difficult to implement in vivo and introduce increased complexity, both of which hinder the use of fibrin in research and medicine. Previously, we demonstrated that the simple inclusion of bifunctionalized poly(ethylene glycol)-n-hydroxysuccinimide (PEG-NHS) in the fibrinogen solvent slows the degradation rate of fibrin by providing additional crosslinking. In this study, we aimed to further improve the longevity of fibrin gels such that they could be used for tissue engineering in vitro or in situ without the need for proteolysis inhibitors. It is well documented that increasing the salinity of fibrin precursor solutions affects the resulting gel morphology. In this study, we investigated whether this altered morphology influences the fibrin degradation rate. Increasing the final sodium chloride (NaCl) concentration from 145 mM (physiologic level) to 250 mM resulted in fine, transparent high-salt (HS) fibrin gels that degrade 2-3 times slower than coarse, opaque physiologic-salt (PS) fibrin gels both in vitro (when treated with proteases and when seeded with amniotic fluid stem cells) and in vivo (when injected subcutaneously into mice). Increased salt concentrations did not affect the viability of encapsulated cells, the ability of encapsulated endothelial cells to form rudimentary capillary networks, or the ability of the gels to maintain induced pluripotent stem cells. Finally, when implanted subcutaneously, PS gels degraded completely within one week while HS gels remained stable and maintained viability of seeded dermal fibroblasts. To our knowledge, this is the simplest method reported for the fabrication of fibrin gels with tunable degradation properties and will be useful for implementing fibrin gels in a wide range of research and clinical applications.

scholarly journals Increasing salinity of fibrinogen solvent generates stable fibrin hydrogels for cell delivery or tissue engineering

PLoS ONE ◽  
2021 ◽  
Vol 16 (5) ◽  
pp. e0239242
Author(s):  
Dillon K. Jarrell ◽  
Ethan J. Vanderslice ◽  
Mallory L. Lennon ◽  
Anne C. Lyons ◽  
Mitchell C. VeDepo ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Degradation Rate ◽  
3D Cell Culture ◽  
Dermal Fibroblasts ◽  
Cell Delivery ◽  
Fibrin Gels ◽  
Wide Range

Fibrin has been used clinically for wound coverings, surgical glues, and cell delivery because of its affordability, cytocompatibility, and ability to modulate angiogenesis and inflammation. However, its rapid degradation rate has limited its usefulness as a scaffold for 3D cell culture and tissue engineering. Previous studies have sought to slow the degradation rate of fibrin with the addition of proteolysis inhibitors or synthetic crosslinkers that require multiple functionalization or polymerization steps. These strategies are difficult to implement in vivo and introduce increased complexity, both of which hinder the use of fibrin in research and medicine. Previously, we demonstrated that additional crosslinking of fibrin gels using bifunctionalized poly(ethylene glycol)-n-hydroxysuccinimide (PEG-NHS) slows the degradation rate of fibrin. In this study, we aimed to further improve the longevity of these PEG-fibrin gels such that they could be used for tissue engineering in vitro or in situ without the need for proteolysis inhibitors. It is well documented that increasing the salinity of fibrin precursor solutions affects the resulting gel morphology. Here, we investigated whether this altered morphology influences the fibrin degradation rate. Increasing the final sodium chloride (NaCl) concentration from 145 mM (physiologic level) to 250 mM resulted in fine, transparent high-salt (HS) fibrin gels that degrade 2–3 times slower than coarse, opaque physiologic-salt (PS) fibrin gels both in vitro (when treated with proteases and when seeded with amniotic fluid stem cells) and in vivo (when injected subcutaneously into mice). Increased salt concentrations did not affect the viability of encapsulated cells, the ability of encapsulated endothelial cells to form rudimentary capillary networks, or the ability of the gels to maintain induced pluripotent stem cells. Finally, when implanted subcutaneously, PS gels degraded completely within one week while HS gels remained stable and maintained viability of seeded dermal fibroblasts. To our knowledge, this is the simplest method reported for the fabrication of fibrin gels with tunable degradation properties and will be useful for implementing fibrin gels in a wide range of research and clinical applications.

The Management of Post-Tonsillectomy Morbidity in Patients With Sleep Apnoea

2019 ◽  
Vol 70 (10) ◽  
pp. 3738-3740
Keyword(s):  
Day Surgery ◽  
Sleep Apnoea ◽  
Integrative Approach ◽  
Multicenter Studies ◽  
Therapeutic Modalities ◽  
Advantages And Disadvantages ◽  
Obstructive Sleep ◽  
Wide Range ◽  
The Impact ◽  
Surgery Center

The Tonsillectomy in children or adults is an intervention commonly encountered in the ENT (Ear Nose and Throat) and Head and Neck surgeon practice. The current tendency is to perform this type of surgery in major ambulatory surgery centers. Two objectives are thus pursued: first of all, the increase of the patient quality of life through the reintegration into the family as quickly as possible and secondly, the expenses associated with continuous hospitalization are reduced. Any tertiary (multidisciplinary) sleep center must ensure the complete diagnosis and treatment (including surgery) of sleep respiratory disorders. Under these conditions the selection of patients and especially the implementation of the specific protocols in order to control the postoperative complications it becomes essential. The present paper describes our experience of tonsillectomy as treatment for selected patients with chronic rhonchopathy (snoring) and mild to moderate obstructive sleep apnoea. It was presented the impact of antibiotics protocols in reducing the main morbid outcomes following tonsillectomy, in our day surgery center. The obtained results can also be a prerequisite for the integrative approach of the patients with sleep apnoea who were recommended surgical treatment. Considering the wide range of therapeutic modalities used in sleep apnoea, each with its specific advantages and disadvantages, more extensive and multicenter studies are needed. Keywords: post-tonsillectomy morbidity, day surgery center, sleep disorders

3D Printing & Pharmaceutical Manufacturing: Opportunities and Challenges

2016 ◽  
Vol 5 (01) ◽  
pp. 4723 ◽  
Author(s):  
Bhusnure O. G.* ◽  
Gholve V. S. ◽  
Sugave B. K. ◽  
Dongre R. C. ◽  
Gore S. A. ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Tissue Engineering ◽  
3D Printing ◽  
Computer Aided Design ◽  
Patient Specific ◽  
Computer Design ◽  
3D Scaffolds ◽  
Engineering Research ◽  
Advantages And Disadvantages ◽  
Computer Aided

Many researchers have attempted to use computer-aided design (C.A.D) and computer-aided manufacturing (CAM) to realize a scaffold that provides a three-dimensional (3D) environment for regeneration of tissues and organs. As a result, several 3D printing technologies, including stereolithography, deposition modeling, inkjet-based printing and selective laser sintering have been developed. Because these 3D printing technologies use computers for design and fabrication, and they can fabricate 3D scaffolds as designed; as a consequence, they can be standardized. Growth of target tissues and organs requires the presence of appropriate growth factors, so fabrication of 3Dscaffold systems that release these biomolecules has been explored. A drug delivery system (D.D.S) that administrates a pharmaceutical compound to achieve a therapeutic effect in cells, animals and humans is a key technology that delivers biomolecules without side effects caused by excessive doses. 3D printing technologies and D. D. Ss have been assembled successfully, so new possibilities for improved tissue regeneration have been suggested. If the interaction between cells and scaffold system with biomolecules can be understood and controlled, and if an optimal 3D tissue regenerating environment is realized, 3D printing technologies will become an important aspect of tissue engineering research in the near future. 3D Printing promises to produce complex biomedical devices according to computer design using patient-specific anatomical data. Since its initial use as pre-surgical visualization models and tooling molds, 3D Printing has slowly evolved to create one-of-a-kind devices, implants, scaffolds for tissue engineering, diagnostic platforms, and drug delivery systems. Fuelled by the recent explosion in public interest and access to affordable printers, there is renewed interest to combine stem cells with custom 3D scaffolds for personalized regenerative medicine. Before 3D Printing can be used routinely for the regeneration of complex tissues (e.g. bone, cartilage, muscles, vessels, nerves in the craniomaxillofacial complex), and complex organs with intricate 3D microarchitecture (e.g. liver, lymphoid organs), several technological limitations must be addressed. Until recently, tablet designs had been restricted to the relatively small number of shapes that are easily achievable using traditional manufacturing methods. As 3D printing capabilities develop further, safety and regulatory concerns are addressed and the cost of the technology falls, contract manufacturers and pharmaceutical companies that experiment with these 3D printing innovations are likely to gain a competitive edge. This review compose the basics, types & techniques used, advantages and disadvantages of 3D printing

scholarly journals The aspects of microbial biomass use in the utilization of selected waste from the agro-food industry

2020 ◽  
Vol 15 (1) ◽  
pp. 787-796 ◽  
Author(s):  
Marek Kieliszek ◽  
Kamil Piwowarek ◽  
Anna M. Kot ◽  
Katarzyna Pobiega
Keyword(s):  
Food Industry ◽  
Industrial Applications ◽  
Waste Products ◽  
Yeast Biomass ◽  
Wide Range ◽  
Innovative Solutions ◽  
Biomass Management ◽  
Effective Use ◽  
Modern Technologies ◽  
Biomass Of Microorganisms

AbstractCellular biomass of microorganisms can be effectively used in the treatment of waste from various branches of the agro-food industry. Urbanization processes and economic development, which have been intensifying in recent decades, lead to the degradation of the natural environment. In the first half of the 20th century, problems related to waste management were not as serious and challenging as they are today. The present situation forces the use of modern technologies and the creation of innovative solutions for environmental protection. Waste of industrial origin are difficult to recycle and require a high financial outlay, while the organic waste of animal and plant origins, such as potato wastewater, whey, lignin, and cellulose, is dominant. In this article, we describe the possibilities of using microorganisms for the utilization of various waste products. A solution to reduce the costs of waste disposal is the use of yeast biomass. Management of waste products using yeast biomass has made it possible to generate new metabolites, such as β-glucans, vitamins, carotenoids, and enzymes, which have a wide range of industrial applications. Exploration and discovery of new areas of applications of yeast, fungal, and bacteria cells can lead to an increase in their effective use in many fields of biotechnology.

scholarly journals Advanced mycelium materials as potential self-growing biomedical scaffolds

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Maria Elena Antinori ◽  
Marco Contardi ◽  
Giulia Suarato ◽  
Andrea Armirotti ◽  
Rosalia Bertorelli ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Low Cost ◽  
Direct Interaction ◽  
Dermal Fibroblasts ◽  
Engineering Systems ◽  
Edible Fungi ◽  
Avant Garde ◽  
Fibrous Network ◽  
Body Tissues ◽  
Wide Range

AbstractMycelia, the vegetative part of fungi, are emerging as the avant-garde generation of natural, sustainable, and biodegradable materials for a wide range of applications. They are constituted of a self-growing and interconnected fibrous network of elongated cells, and their chemical and physical properties can be adjusted depending on the conditions of growth and the substrate they are fed upon. So far, only extracts and derivatives from mycelia have been evaluated and tested for biomedical applications. In this study, the entire fibrous structures of mycelia of the edible fungi Pleurotus ostreatus and Ganoderma lucidum are presented as self-growing bio-composites that mimic the extracellular matrix of human body tissues, ideal as tissue engineering bio-scaffolds. To this purpose, the two mycelial strains are inactivated by autoclaving after growth, and their morphology, cell wall chemical composition, and hydrodynamical and mechanical features are studied. Finally, their biocompatibility and direct interaction with primary human dermal fibroblasts are investigated. The findings demonstrate the potentiality of mycelia as all-natural and low-cost bio-scaffolds, alternative to the tissue engineering systems currently in place.

scholarly journals Bioactive potential of natural biomaterials: identification, retention and assessment of biological properties

2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Kieran Joyce ◽  
Georgina Targa Fabra ◽  
Yagmur Bozkurt ◽  
Abhay Pandit
Keyword(s):  
Tissue Engineering ◽  
Therapeutic Potential ◽  
Biological Properties ◽  
Biological Assessment ◽  
Cross Linking ◽  
Natural Polymers ◽  
Drug Delivery Device ◽  
Biomedical Device ◽  
Wide Range ◽  
Bioactive Potential

AbstractBiomaterials have had an increasingly important role in recent decades, in biomedical device design and the development of tissue engineering solutions for cell delivery, drug delivery, device integration, tissue replacement, and more. There is an increasing trend in tissue engineering to use natural substrates, such as macromolecules native to plants and animals to improve the biocompatibility and biodegradability of delivered materials. At the same time, these materials have favourable mechanical properties and often considered to be biologically inert. More importantly, these macromolecules possess innate functions and properties due to their unique chemical composition and structure, which increase their bioactivity and therapeutic potential in a wide range of applications. While much focus has been on integrating these materials into these devices via a spectrum of cross-linking mechanisms, little attention is drawn to residual bioactivity that is often hampered during isolation, purification, and production processes. Herein, we discuss methods of initial material characterisation to determine innate bioactivity, means of material processing including cross-linking, decellularisation, and purification techniques and finally, a biological assessment of retained bioactivity of a final product. This review aims to address considerations for biomaterials design from natural polymers, through the optimisation and preservation of bioactive components that maximise the inherent bioactive potency of the substrate to promote tissue regeneration.

scholarly journals Ureido Functionalization through Amine-Urea Transamidation under Mild Reaction Conditions

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1583
Author(s):  
Natalia Guerrero-Alburquerque ◽  
Shanyu Zhao ◽  
Daniel Rentsch ◽  
Matthias M. Koebel ◽  
Marco Lattuada ◽  
...  
Keyword(s):  
Aqueous Media ◽  
Reaction Times ◽  
Reaction Rates ◽  
Secondary Amines ◽  
Isocyanic Acid ◽  
Advantages And Disadvantages ◽  
Major Disadvantage ◽  
Wide Range ◽  
Potential Alternative ◽  
Full Conversion

Ureido-functionalized compounds play an indispensable role in important biochemical processes, as well as chemical synthesis and production. Isocyanates, and KOCN in particular, are the preferred reagents for the ureido functionalization of amine-bearing compounds. In this study, we evaluate the potential of urea as a reagent to graft ureido groups onto amines at relatively low temperatures (<100 °C) in aqueous media. Urea is an inexpensive, non-toxic and biocompatible potential alternative to KOCN for ureido functionalization. From as early as 1864, urea was the go-to reagent for polyurea polycondensation, before falling into disuse after the advent of isocyanate chemistry. We systematically re-investigate the advantages and disadvantages of urea for amine transamidation. High ureido-functionalization conversion was obtained for a wide range of substrates, including primary and secondary amines and amino acids. Reaction times are nearly independent of substrate and pH, but excess urea is required for practically feasible reaction rates. Near full conversion of amines into ureido can be achieved within 10 h at 90 °C and within 24 h at 80 °C, and much slower reaction rates were determined at lower temperatures. The importance of the urea/amine ratio and the temperature dependence of the reaction rates indicate that urea decomposition into an isocyanic acid or a carbamate intermediate is the rate-limiting step. The presence of water leads to a modest increase in reaction rates, but the full conversion of amino groups into ureido groups is also possible in the absence of water in neat alcohol, consistent with a reaction mechanism mediated by an isocyanic acid intermediate (where the water assists in the proton transfer). Hence, the reaction with urea avoids the use of toxic isocyanate reagents by in situ generation of the reactive isocyanate intermediate, but the requirement to separate the excess urea from the reaction product remains a major disadvantage.

scholarly journals Artificial Cardiac Muscle with or without the Use of Scaffolds

2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Yifei Li ◽  
Donghui Zhang
Keyword(s):  
Tissue Engineering ◽  
Cardiovascular Diseases ◽  
Cardiac Tissue ◽  
Contractile Function ◽  
Rapid Development ◽  
Treatment Options ◽  
Cardiac Tissue Engineering ◽  
Hydrogel Scaffold ◽  
Fibrous Matrix ◽  
Advantages And Disadvantages

During the past several decades, major advances and improvements now promote better treatment options for cardiovascular diseases. However, these diseases still remain the single leading cause of death worldwide. The rapid development of cardiac tissue engineering has provided the opportunity to potentially restore the contractile function and retain the pumping feature of injured hearts. This conception of cardiac tissue engineering can enable researchers to produce autologous and functional biomaterials which represents a promising technique to benefit patients with cardiovascular diseases. Such an approach will ultimately reshape existing heart transplantation protocols. Notable efforts are accelerating the development of cardiac tissue engineering, particularly to create larger tissue with enhanced functionality. Decellularized scaffolds, polymer synthetics fibrous matrix, and natural materials are used to build robust cardiac tissue scaffolds to imitate the morphological and physiological patterns of natural tissue. This ultimately helps cells to implant properly to obtain endogenous biological capacity. However, newer designs such as the hydrogel scaffold-free matrix can increase the applicability of artificial tissue to engineering strategies. In this review, we summarize all the methods to produce artificial cardiac tissue using scaffold and scaffold-free technology, their advantages and disadvantages, and their relevance to clinical practice.

Sign in / Sign up

Export Citation Format

Share Document